Database Users

[UNBRICK] error:[D14] Streaming hello Failed!

I have found the solution to this horrible problem
[PROBLEM] error:[D14] Streaming hello Failed! error: Download fail!
Unbrick your Dell Streak!
Contact me anytime
- Private Message
- AIM: SiscoAIM
- Call/Text:Mod Edit, please do not put phone numbers in open forum thanks

soarly
Hi I hope you can help. The good news is I finally got the ota 2.2 update and also unlocked my att dell streak. I should have stopped there. I tried rooting it with superoneclick and now I have a bricked streak. It is stuck on the dell logo and will not boot further when I try to run recovery. it attemps to do a factory reset but gets stuck again on the boot screen. I cannot run the recovery package off the sd card for the same reason? I am not sure if there is a recovery package on the sd. Any advice would be greatly appreciated.

brandonsisco said:
I have found the solution to this horrible problem
[PROBLEM] error:[D14] Streaming hello Failed! error: Download fail!
Unbrick your Dell Streak!
Contact me anytime
- Private Message
- AIM: SiscoAIM
- Call/Text:Mod Edit, please do not put phone numbers in open forum thanks
Click to expand...
Click to collapse
Mine doesn't say Streaming failed by it is the d14 error mine says error D14 run Hex failed. see bottom of log any help?
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Fri Feb 08 11:46:37 2013
Check image DBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
ERROR[D14]: Run HEX Failed!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......

Bricked dell streak...

i was trying to install Streakdroid 2.3 ok thats cool right
well it failed hard
when i tryd to flash the new baseband amss.mbn in fastboot
i get this
Flash error -1
now it won't boot up anymore!
only get get in the volUp + power
the rest just dont work
any fixes ?

Hi, i think you must flash the baseband again !
Sry for bad english but i´m a german User
Best Regards
UKSheep

i think if you run the QDL tool that should fix the problem for you.

RDilus said:
i was trying to install Streakdroid 2.3 ok thats cool right
well it failed hard
when i tryd to flash the new baseband amss.mbn in fastboot
i get this
Flash error -1
now it won't boot up anymore!
only get get in the volUp + power
the rest just dont work
any fixes ?
Click to expand...
Click to collapse
Android Development is for Development and not Problems
Moving to General

lufc said:
Android Development is for Development and not Problems
Moving to General
Click to expand...
Click to collapse
sorry my bad

yasir_jan87 said:
i think if you run the QDL tool that should fix the problem for you.
Click to expand...
Click to collapse
more info pls

yasir_jan87 said:
i think if you run the QDL tool that should fix the problem for you.
Click to expand...
Click to collapse
QDL Tool failed also
Code:
###QDLTool: M 2.7.4.5, build ID: 1.302.20100910, time stamp: Sat Jun 11 21:24:42 2011
Check image DBL: C:\Users\RDilux\Desktop\streakflash\images\dbl.mbn ...
Check image FSBL: C:\Users\RDilux\Desktop\streakflash\images\fsbl.mbn ...
Check image OSBL: C:\Users\RDilux\Desktop\streakflash\images\osbl.mbn ...
Check image AMSS: C:\Users\RDilux\Desktop\streakflash\images\amss.mbn ...
Check image DSP1: C:\Users\RDilux\Desktop\streakflash\images\dsp1.mbn ...
Check image APPSBL: C:\Users\RDilux\Desktop\streakflash\images\appsboot.mbn ...
Check image DT: C:\Users\RDilux\Desktop\streakflash\images\DT.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#AMSS to DDR success
#DSP1 to DDR success
#DT to DDR success
#APPSBL to DDR success
#backup FSBL to DDR success
#backup OSBL to DDR success
#backup DT to DDR success
#backup APPSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#ERROR[DQ4]#Download AMSS Fail!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Download Fail! - 2011/06/11 21:25:11
Elapsed Time: 28.16 sec

Please flash the Baseband via Fastboot... !
Befor that, check the driver !!!
Best Regards UKSheep

UKSheep said:
Please flash the Baseband via Fastboot... !
Befor that, check the driver !!!
Best Regards UKSheep
Click to expand...
Click to collapse
just like a said before
i only can asses VolUp + Power
the rest dont work so also no fastboot!

you dont need the power buttom,
take battery out,
plug in to you computer while holding the volUP button.
is that the way you do it?

RDilus said:
QDL Tool failed also
Code:
###QDLTool: M 2.7.4.5, build ID: 1.302.20100910, time stamp: Sat Jun 11 21:24:42 2011
Check image DBL: C:\Users\RDilux\Desktop\streakflash\images\dbl.mbn ...
Check image FSBL: C:\Users\RDilux\Desktop\streakflash\images\fsbl.mbn ...
Check image OSBL: C:\Users\RDilux\Desktop\streakflash\images\osbl.mbn ...
Check image AMSS: C:\Users\RDilux\Desktop\streakflash\images\amss.mbn ...
Check image DSP1: C:\Users\RDilux\Desktop\streakflash\images\dsp1.mbn ...
Check image APPSBL: C:\Users\RDilux\Desktop\streakflash\images\appsboot.mbn ...
Check image DT: C:\Users\RDilux\Desktop\streakflash\images\DT.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#AMSS to DDR success
#DSP1 to DDR success
#DT to DDR success
#APPSBL to DDR success
#backup FSBL to DDR success
#backup OSBL to DDR success
#backup DT to DDR success
#backup APPSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#DEBUG: CQDLCtrl::CmdDlHexWriteImageToNAND target error:Write unsuccessful
#ERROR[DQ4]#Download AMSS Fail!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Download Fail! - 2011/06/11 21:25:11
Elapsed Time: 28.16 sec
Click to expand...
Click to collapse
There are two versions of qdl tool you ran the older, I have it, but not sure how to get you a copy. Any ideas? Large file over 100mb

vanemburghj said:
There are two versions of qdl tool you ran the older, I have it, but not sure how to get you a copy. Any ideas? Large file over 100mb
Click to expand...
Click to collapse
megaupload upload it there

RDilus said:
megaupload upload it there
Click to expand...
Click to collapse
Fist timer with megaupload think I did it correctly:
http://www.megaupload.com/?d=WJ8J8OMH
should be zip file with version 2.7.4.8, hope it works for you.

vanemburghj said:
Fist timer with megaupload think I did it correctly:
http://www.megaupload.com/?d=WJ8J8OMH
should be zip file with version 2.7.4.8, hope it works for you.
Click to expand...
Click to collapse
gonna download now i thanked you already for the hard work

just another error...
o year i using win7 x64 btw
Code:
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Sun Jun 12 17:02:33 2011
Check image DBL: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Users\RDilux\Desktop\QDLTool3rd_20101022_GAUSB1A130500\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
Run HEX success
Check Secure Boot is enabled
Streaming hello success
Send Security mode success
Download partition table success
#Download DBL success
#Download FSBL success
#Download OSBL success
#Download DT success
#Download backup FSBL success
Erase EFS2 success
Wait for rebooting ....... ok
Wait for modem set up ......
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/06/12 17:03:03
Elapsed Time: 29.57 sec

There are special settings you must use for win 7 64 bit or qdl will not work. On the road right now will post them when I get home roughly 5 hours from time of this post. Think that will fix your qdl problem.

vanemburghj said:
There are special settings you must use for win 7 64 bit or qdl will not work. On the road right now will post them when I get home roughly 5 hours from time of this post. Think that will fix your qdl problem.
Click to expand...
Click to collapse
no problem i will wait

Sorry about the late post, the wife had other ideas for the day's activities anyways here you go:
Ok go to command prompt change directory to C:\Windows\system32.
Enter the following command:
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS press enter
Enter next command:
bcdedit -set loadoptions testsigning on
Reboot your computer, should see something your desktop after bootup about being test mode or something like that, at that point you know you are ready use qdl.
Run qdl tool how I do it when really brick it, which I think you did is run old version, let streak reboot or get to black screen (most likely black screen), shut down Streak, most likely by removing battery, than run newer version of qdl, reboot and you should be on BB 305. All this is not a quick process so let your Streak run for awhile, before removing battery after each boot up.
Install custom rom, don’t use Steve’s 2.0.0 amss file it is corrupted use 351 or 354 amss and dsp1.
Once your streak is up and running, need to reset your PC, go to command prompt change directory to C:\Windows\system32. Enter bcdedit /deletevalue loadoptions, once complete, enter bcdedit –set testsigning off, reboot your PC and test mode warning should be gone from your desktop.
Let me know how things turn out.

vanemburghj said:
Run qdl tool how I do it when really brick it, which I think you did is run old version, let streak reboot or get to black screen (most likely black screen), shut down Streak, most likely by removing battery, than run newer version of qdl, reboot and you should be on BB 305. All this is not a quick process so let your Streak run for awhile, before removing battery after each boot up.
Click to expand...
Click to collapse
explain this part pls lol

Do this first and if it works we will leave well enough alone, run version of qdl tool you downloaded from me. Let it go through the process and once it reboots, let it run for a bit, (mine usually takes anywhere from 10 to 20 minutes before OS starts up). If it worked right you are on BaseBand 305 and go from there. Am assuming since you tried once before you have the drivers set to Qualcomm HS-USB Diagnostics 9002, you will see that once you plug the streak in while holding volume up button.

ze550kl bricked :(

hi guys ,
this is the situation: zenfone 2 laser ze550kl (z00ld) not work.
If i press power and volume+ it go to fastboot mode and with "fastboot devices" it is find on my pc.
If i press power and volume- it no go to recovery and it remain on logo asus in bootloop
I've tryied every guide on this site but nothing work.
Now , i want to try with asus flash tool , i've the compatible version but i have not .raw system.
Someone can help me ?
i've tryied this https://forum.xda-developers.com/ze...nks-asus-zenfone-2-laser-raw-service-t3526083 but don't work.
Thanks for the patience and sorry for my bad english :angel:

Squagghy said:
hi guys ,
this is the situation: zenfone 2 laser ze550kl (z00ld) not work.
If i press power and volume+ it go to fastboot mode and with "fastboot devices" it is find on my pc.
If i press power and volume- it no go to recovery and it remain on logo asus in bootloop
I've tryied every guide on this site but nothing work.
Now , i want to try with asus flash tool , i've the compatible version but i have not .raw system.
Someone can help me ?
i've tryied this https://forum.xda-developers.com/ze...nks-asus-zenfone-2-laser-raw-service-t3526083 but don't work.
Thanks for the patience and sorry for my bad english :angel:
Click to expand...
Click to collapse
just flash twrp using fastboot
Or use raw firmware

addy692 said:
just flash twrp using fastboot
Or use raw firmware
Click to expand...
Click to collapse
How i said i haven't a workly raw system
I've tryied to flash recovery twrp but don't work..power + volume down only restart the smartphone and when go in recovery mode after 10-20 seconds it's restart again

Squagghy said:
How i said i haven't a workly raw system
I've tryied to flash recovery twrp but don't work..power + volume down only restart the smartphone and when go in recovery mode after 10-20 seconds it's restart again
Click to expand...
Click to collapse
use this firmware and flash using qpst or fastboot simply rin fastbokt flash all
https://drive.google.com/file/d/0B43Ue6xY9MmdOGxXZ2RRQUJrOWs/view?usp=sharing

addy692 said:
use this firmware and flash using qpst or fastboot simply rin fastbokt flash all
https://drive.google.com/file/d/0B43Ue6xY9MmdOGxXZ2RRQUJrOWs/view?usp=sharing
Click to expand...
Click to collapse
after flashing nothing news :crying:
it stay on logo asus and with power+volume+ go in fastboot mode and with power+volume- it restart and restart....
p.s. qpst not find ports with phone

Squagghy said:
after flashing nothing news :crying:
it stay on logo asus and with power+volume+ go in fastboot mode and with power+volume- it restart and restart....
p.s. qpst not find ports with phone
Click to expand...
Click to collapse
I have the same problem. I have one of my friend's phone, which his brother gave him. We have no idea what has gone wrong with this phone. It just won't pass the asus logo. Also displays a BLUE SCREEN when i try to boot into recovery.
First i thought recovery must be corrupted, buti had no idea about asus phones (i own a sony phone). So i tried to flash a stock recovery through fastboot, but it didn't work. Then read from some blog to flash system.img, recovery.img and boot.img. Links were also there. Did the same but no still no use. It made it worst because on a normal boot (holding just the power button) the phone shows fastboot mode!!! Not i'm trying asus flash tool.
Tried Asus flash tool : error 5 : access denied. so i'm stuck

C:\Users\Home\Desktop\[firmware27]WW_ZE550KL_1.17.40.1234-rel-user-2016030418590
4-secured-releaseAFT_QC>fastboot_8916 format:ext4 userdata
Creating filesystem with parameters:
Size: 11915980800
Block size: 4096
Blocks per group: 32768
Inodes per group: 8176
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 2909175
Block groups: 89
Reserved block group size: 711
Created filesystem with 11/727664 inodes and 85558/2909175 blocks
error: file_write: write: Bad file descriptor
Cannot read image.
erasing 'userdata'...
OKAY [ 3.719s]
finished. total time: 3.734s
is the only error that result on flashing.

Squagghy said:
C:\Users\Home\Desktop[firmware27]WW_ZE550KL_1.17.40.1234-rel-user-2016030418590
4-secured-releaseAFT_QC>fastboot_8916 format:ext4 userdata
Creating filesystem with parameters:
Size: 11915980800
Block size: 4096
Blocks per group: 32768
Inodes per group: 8176
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 2909175
Block groups: 89
Reserved block group size: 711
Created filesystem with 11/727664 inodes and 85558/2909175 blocks
error: file_write: write: Bad file descriptor
Cannot read image.
erasing 'userdata'...
OKAY [ 3.719s]
finished. total time: 3.734s
is the only error that result on flashing.
Click to expand...
Click to collapse
my device was also bricked a month ago i can guide u
ok so now u have to try qpst
Just download qualcomm drivers and then use qpst
Contact me on telegram @ady692

addy692 said:
my device was also bricked a month ago i can guide u
ok so now u have to try qpst
Just download qualcomm drivers and then use qpst
Contact me on telegram @ady692
Click to expand...
Click to collapse
ok i try with qpst
the phone not result in any port of pc :/

Squagghy said:
ok i try with qpst
the phone not result in any port of pc :/
Click to expand...
Click to collapse
install qpst drivers
And goto fastboot and type
Fastboot erase aboot
And then take out battery insert again and connect to pc it should show as qcom 9006 port or 9008
Caution i lost my imei after unbrick so backup ur efs before doing anything

addy692 said:
install qpst drivers
And goto fastboot and type
Fastboot erase aboot
And then take out battery insert again and connect to pc it should show as qcom 9006 port or 9008
Caution i lost my imei after unbrick so backup ur efs before doing anything
Click to expand...
Click to collapse
drivers qualcomm installed, after erase aboot it appears a port 9006 but efs and qpst not found the phone
and it appears on my pc 7 local disk

Squagghy said:
drivers qualcomm installed, after erase aboot it appears a port 9006 but efs and qpst not found the phone
and it appears on my pc 7 local disk
Click to expand...
Click to collapse
firstly i suggest you to backup ur efs man
hey it would be easy if u contact somewhere else
Like telegram or phone cal
Or follow this
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/

I have followed the instruction but nothing good news ...phone don't work ...local disk doesn't appear on PC , only port appear but qfil failed ...i thinks that the phone cannot be restored
i've read better ..so i'm in old Qualcomm HS-USB QDLoader 9008 mode ....but there is one little problem to resolve this brick....qfil : after i choise the necessary file it fail ..sahara fail..
what's wrong ?

Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
in QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
in QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download

Squagghy said:
Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
in QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
in QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
it will surely work
Just contact me on phone if
I am also making guide for this but that will take time

Unfortunately time is the only thing I do not have .... if you can post a guide to solve it would be great

Squagghy said:
Unfortunately time is the only thing I do not have .... if you can post a guide to solve it would be great
Click to expand...
Click to collapse
u are almost at the end of guide
Just try usung qfil it will work
Use different version if qpst

addy692 said:
u are almost at the end of guide
Just try usung qfil it will work
Use different version if qpst
Click to expand...
Click to collapse
used different version but nothing...i wrong something i'm sure...xD
13: C:\lui\prog_emmc_firehose_8936.mbn
01:46:17: Requested ID 13, file: "C:\lui\prog_emmc_firehose_8936.mbn"
01:46:17: ERROR: function: rx_data:247 Error occurred while reading from COM port
01:46:17: ERROR: function: sahara_main:854 Sahara protocol error
01:46:17: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download

Squagghy said:
used different version but nothing...i wrong something i'm sure...xD
13: C:\lui\prog_emmc_firehose_8936.mbn
01:46:17: Requested ID 13, file: "C:\lui\prog_emmc_firehose_8936.mbn"
01:46:17: ERROR: function: rx_data:247 Error occurred while reading from COM port
01:46:17: ERROR: function: sahara_main:854 Sahara protocol error
01:46:17: ERROR: function: main:265 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download
Click to expand...
Click to collapse
which files u r using
U should use programmef file in raw firmware folder
The link which i given to you there is firmware folder where u will find programmer file xml file and other
Specific to ur device use that

I have a simular problem. On my device gpt was erased by fault.
When I flash the firmware from subfolder "firmware/8939" with qfil (with "emmc_appsboot_8939.mbn" renamed to "emmc_appsboot.mbn"), I end up with the device booting in fastboot. But from there I can do nothing else, because the bootloader is locked. Tryed it with "flashall_AFT.cmd", but it cannot unlock bootloader ("fastboot oem unlock" gives "unkown command" error).
How can I flash partiton "gpt_both0.bin" without unlocking the bootloader? I think I need a modified "rawprogram0.xml" and "patch0.xml" for complete gpt and firmware, but how to do it?
Thanks in advance.
Mikel

[Q] : bootloader stuck on sending 'unlocktoken' (0 KB) PLEASE HELP .

Hi, Guys, hope you all have a great day .
i want to unlock my bootloader on htc explorer, everything goes good, i get my Unlock_code file, but when i'm typing : fastboot flash unlocktoken Unlock_code.bin it stucks on sending 'unlocktoken' (0 KB) . . .
i tried to use the command from c:\Android... but no way .
please help, i need really need this problem to be fixed . Thank you .

Need some help with Yu Plus...

I was trying to flash custom rom on yureka plus. tried flashing custom recovery from fastboot using fastboot flash recovery twrp.img. It completed successfully but now i was unable to open recovery using key combo. tried fastboot boot twrp.img. failed again .
Now phone doesn't boot up
tried flashing stock rom using YGDP tool using CPB file.Message looger says
""
20:37:02 CELL1: V4.0.3.0
20:37:02 CELL1: Cell 1 USB address is: 5&301AACDC&0&1
20:37:04 CELL1: Download Started...
20:37:04 CELL1: Downloading CPB:
20:37:04 CELL1: Init DownQueue...
20:37:04 CELL1: 5.1.153.00.P0.160604.8675_I02.def
20:37:04 CELL1: Device connected, start to download ...
20:37:04 CELL1: Get bootloader information ...
20:37:04 CELL1: Bootloader is old !
20:37:04 CELL1: Bootloader will not use CRC while system img!
20:37:04 CELL1: Bootloader supports querying CID!
20:37:04 CELL1: Bootloader supports querying Secure !
20:37:04 CELL1: Check device ...
20:37:04 CELL1: Jump eMMC check. User setting.
20:37:04 CELL1: Check phone name fail, The phone name 'cp8675_I02' not contained in '8675_I02'
20:37:04 CELL1: Check phone name fail, Please check the 'ProductName' in the PhoneInfo.yl
20:37:04 CELL1: Check phone name fail !, msg:CPcp8675_I02_P1
20:37:04 CELL1: Download failed,please try again!!
20:37:04 CELL1: Total download time elapsed: 0 min : 0 sec
20:37:04 CELL1: Downloading all files: Failed!
""
now trying to run fastboot devices it detects device but for all other commands result<unknown command>
Also now fastboot is not like fastboot menu. It says
Information
Dont disconnect the data cable.
Fastboot opened via connecting data cable to laptop and immediately pressing volume up. can't find anything, anywhere online. Please help...

I too have the same issue, My fastboot menu is different from all other Yureka Plus Phones.
Please help me how to solve the issue.
Shreyas Parashar said:
I was trying to flash custom rom on yureka plus. tried flashing custom recovery from fastboot using fastboot flash recovery twrp.img. It completed successfully but now i was unable to open recovery using key combo. tried fastboot boot twrp.img. failed again .
Now phone doesn't boot up
tried flashing stock rom using YGDP tool using CPB file.Message looger says
""
20:37:02 CELL1: V4.0.3.0
20:37:02 CELL1: Cell 1 USB address is: 5&301AACDC&0&1
20:37:04 CELL1: Download Started...
20:37:04 CELL1: Downloading CPB:
20:37:04 CELL1: Init DownQueue...
20:37:04 CELL1: 5.1.153.00.P0.160604.8675_I02.def
20:37:04 CELL1: Device connected, start to download ...
20:37:04 CELL1: Get bootloader information ...
20:37:04 CELL1: Bootloader is old !
20:37:04 CELL1: Bootloader will not use CRC while system img!
20:37:04 CELL1: Bootloader supports querying CID!
20:37:04 CELL1: Bootloader supports querying Secure !
20:37:04 CELL1: Check device ...
20:37:04 CELL1: Jump eMMC check. User setting.
20:37:04 CELL1: Check phone name fail, The phone name 'cp8675_I02' not contained in '8675_I02'
20:37:04 CELL1: Check phone name fail, Please check the 'ProductName' in the PhoneInfo.yl
20:37:04 CELL1: Check phone name fail !, msg:CPcp8675_I02_P1
20:37:04 CELL1: Download failed,please try again!!
20:37:04 CELL1: Total download time elapsed: 0 min : 0 sec
20:37:04 CELL1: Downloading all files: Failed!
""
now trying to run fastboot devices it detects device but for all other commands result<unknown command>
Also now fastboot is not like fastboot menu. It says
Information
Dont disconnect the data cable.
Fastboot opened via connecting data cable to laptop and immediately pressing volume up. can't find anything, anywhere online. Please help...
Click to expand...
Click to collapse
---------- Post added at 09:29 PM ---------- Previous post was at 09:26 PM ----------
I too have the same issue, My fastboot menu is different from all other Yureka Plus Phones.
Please help me please.
Shreyas Parashar said:
I was trying to flash custom rom on yureka plus. tried flashing custom recovery from fastboot using fastboot flash recovery twrp.img. It completed successfully but now i was unable to open recovery using key combo. tried fastboot boot twrp.img. failed again .
Now phone doesn't boot up
tried flashing stock rom using YGDP tool using CPB file.Message looger says
""
20:37:02 CELL1: V4.0.3.0
20:37:02 CELL1: Cell 1 USB address is: 5&301AACDC&0&1
20:37:04 CELL1: Download Started...
20:37:04 CELL1: Downloading CPB:
20:37:04 CELL1: Init DownQueue...
20:37:04 CELL1: 5.1.153.00.P0.160604.8675_I02.def
20:37:04 CELL1: Device connected, start to download ...
20:37:04 CELL1: Get bootloader information ...
20:37:04 CELL1: Bootloader is old !
20:37:04 CELL1: Bootloader will not use CRC while system img!
20:37:04 CELL1: Bootloader supports querying CID!
20:37:04 CELL1: Bootloader supports querying Secure !
20:37:04 CELL1: Check device ...
20:37:04 CELL1: Jump eMMC check. User setting.
20:37:04 CELL1: Check phone name fail, The phone name 'cp8675_I02' not contained in '8675_I02'
20:37:04 CELL1: Check phone name fail, Please check the 'ProductName' in the PhoneInfo.yl
20:37:04 CELL1: Check phone name fail !, msg:CPcp8675_I02_P1
20:37:04 CELL1: Download failed,please try again!!
20:37:04 CELL1: Total download time elapsed: 0 min : 0 sec
20:37:04 CELL1: Downloading all files: Failed!
""
now trying to run fastboot devices it detects device but for all other commands result<unknown command>
Also now fastboot is not like fastboot menu. It says
Information
Dont disconnect the data cable.
Fastboot opened via connecting data cable to laptop and immediately pressing volume up. can't find anything, anywhere online. Please help...
Click to expand...
Click to collapse