So my title wouldve been longer if I could have allowed it but basically this is what happened
I tried to flash the latest ParanoidAndroid but it got stuck on the boot logo for about 45 minutes. Probably because I was on f2fs and forgot to flash a kernel.
After getting a red font message in TWRP saying /system could not be mounted/found, I did a full format of my phone and flashed a different custom ROM, which got me stuck at the white font screen that just says Google and shows the unlock symbol on the b ottom.
Using the toolkit I flashed stock which worked, as well as manually flashing TWRP through fastboot.
I then did a full wipe like normal when switching ROMs and tried to flash Nitrogen ROM which once again lead me to the white font Google screen.
What should I do exactly so I can flash a custom ROM again, because currently the only thing that is working is stock ROM.
pr0adam said:
So my title wouldve been longer if I could have allowed it but basically this is what happened
I tried to flash the latest ParanoidAndroid but it got stuck on the boot logo for about 45 minutes. Probably because I was on f2fs and forgot to flash a kernel.
After getting a red font message in TWRP saying /system could not be mounted/found, I did a full format of my phone and flashed a different custom ROM, which got me stuck at the white font screen that just says Google and shows the unlock symbol on the b ottom.
Using the toolkit I flashed stock which worked, as well as manually flashing TWRP through fastboot.
I then did a full wipe like normal when switching ROMs and tried to flash Nitrogen ROM which once again lead me to the white font Google screen.
What should I do exactly so I can flash a custom ROM again, because currently the only thing that is working is stock ROM.
Click to expand...
Click to collapse
I'd suggest trying to format data, in Twrp in the wipe section should be a button on the bottom end that says Format data, Erase it Flash all from a stock image and reinstall twrp.
Sent from my Pixel XL using Tapatalk
bennyboy2120 said:
I'd suggest trying to format data, in Twrp in the wipe section should be a button on the bottom end that says Format data, Erase it Flash all from a stock image and reinstall twrp.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Are you referring to the same format data that makes you type in "yes" before doing it? I did that too but I didnt try to re-install TWRP.
And currently after the wipe im on stock recovery so I'm going to go back to The Flashs TWRP that he made as opposed to the latest version of TWRP that prompts for an app install at the end. As I never had this issue on Flashs TWRP
Thanks for the suggestion.
bennyboy2120 said:
I'd suggest trying to format data, in Twrp in the wipe section should be a button on the bottom end that says Format data, Erase it Flash all from a stock image and reinstall twrp.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Ok installing the TWRP after a format didnt do **** unfortunately. Still bootlooping.
Flash stock image via fastboot with flash all, check OEM unlock to dev options, lock and unlock the bootloader to completely wipe your phone. Don't forget checking dev options for OEM unlock between lock and unlocking. flash latest official twrp and try custom rom again.
Related
First, I searched and read all relevant threads concerning this issue. The five threads that showed up in the search did not help me solve my issue.
So on to my problem. I can no longer flash any rom onto my device. I attempted to flash the first official CM10 nightly (which I recently found out was not flashing properly for others) and had no success. I simply got a black screen and nothing more. I eventually got back into TWRP (v2.2.1.4) to try and Nandroid restore, but I noticed that /data was not formatting and the restore failed. Every time I would slide the bar across to confirm the restore TWRP would reboot itself. I then flashed CWM (v6.0.1.0) and the same problems were there. After that I flashed an earlier version of TWRP and successfully restored the backup. I'm not 100% sure how it was successful. So I decided to try flashing another ROM and no go. Same problems. Anyone have any ideas? When I was using CWM I got the error message below.
Code:
E: unable to locate volume information
E: unable to open ums lunfile '/sys/devices/platform/usb_mass_storage/lun0/file'
E: unable to format data
I'm running Bugless Beast with Motley #219
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
aznxk3vi17 said:
I'm having similar, if not identical problems. After flashing TWRP 2.2.1.4, I tried flashing a rom and gapps; the tablet would boot endlessly into recovery. Nothing I did would do anything, so I flashed the stock image to start over. This time, I used CWM 6.0.1.0 touch to make sure that it wasn't the recovery that was causing the problem. However, now after flashing the rom and gapps, instead of booting into recovery, I got stuck at a black screen and had to hold the power button in order to get back to the bootloader.
Now, like you, it seems I can't flash any roms anymore. It's frustrating to say the least.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
What rom did you attempt to flash?
elementur said:
What rom did you attempt to flash?
Click to expand...
Click to collapse
So do I.I attempted to flash the first official CM10 8.18 nightly and had no success. I just got a black screen.Even more I boot into bootloader and choose to boot into recover but just stay at google logo.I try to flash recover once more,but just can't boot into recover!!
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Shano56 said:
I have the same problem, i flashed the cm10 nightly which I learned would not boot. No I have no backup to boot to, and cannot even push a new rom to the storage to try to install.
Click to expand...
Click to collapse
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
phiracle said:
Can't boot into recover,does anyone know what is wrong?When it is in android I can use APM boot into recover or via ADB,but unusually when it is in the bootloader I choose to boot into recover,it just stay at google logo!!What it is going wrong?
Click to expand...
Click to collapse
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
android1234567 said:
There is a bug with the Nexus 7 where you cannot access the recovery through the bootloader. To fix this, boot up into the bootloader on your nexus 7 and, without doing anything, plug it into the computer you used for rooting it and then select the option Restart bootloader and press the power button. Once it gets you back into the bootloader again select Recovery mode and press the power button. It will now get you into the recovery and once you're in recovery you can unplug your tablet from the computer. Note that this fix is not permanent and you will have to do this every time you wish to access your recovery via the bootloader (and this problem is not relevant to the OP's problem).
Click to expand...
Click to collapse
Thank You Very Much!!!
I am having much the same problem as the OP. I finally rooted my Nexus 7 using WugFresh's Nexus Root Toolkit. It seemed all went well. I chose to use TWRP in a first attempt to install a ROM (I was on rooted stock), and following the instructions for installing my chosen ROM I went into it to wipe cache, Dalvic Cache and data. Both cache and dalvic cache wiped without issue, but when I attempted to wipe /data TWRP simply reported that it failed. With that failing, I did not attempt to install a rom. I was still able to boot out of recovery, but even with repeated attempts wiping data always failed. Is any one aware of any solution or have any suggestions. Thank you!
So I rooted my nexus 7 and intended on flashing cm on it by rom manager. I used the root without unlocking boot loader. It doesn't get past the cyanogen boot circle and when it does occasionally, It displays 2 error messages that say "the setup wizard has stopped" and "unfortunately, the process com.google.process.gapps has stopped." Somebody please help I have no idea what to do. I tried wiping data by going to recovery mode but nothing changes. HELP.
Need more information... What recovery do you have? What are the step you did in recovery for install the rom? What version of gapps did you flashed?
Nico_60 said:
Need more information... What recovery do you have? What are the step you did in recovery for install the rom? What version of gapps did you flashed?
Click to expand...
Click to collapse
I think I have the clockworkmod recovery. Didnt do that and didnt flash gapps
If you want to flash cm 10.1 :
recovery> factory reset, format system (optional), flash rom, flash gapps 20130301, reboot.
How would I flash the rom and gapps 20130301? Sorry I'm a bit new to this stuff.
Have you read OP of cm thread?
I don't have access to the sd card so I cant put anything
Without unlocking bootloader you want flash cyanogenmod?:<facepalm>
Unlock bootloader and then flash custom rom!
darkmatthew said:
Without unlocking bootloader you want flash cyanogenmod?:<facepalm>
Unlock bootloader and then flash custom rom!
Click to expand...
Click to collapse
You don't need it... But it really helps if you want to fastboot flash something.
All you need to do is a factory reset from recovery.
Sent from my Nexus 7 using Tapatalk HD
So i unlocked the bootloader and i did a factory reset and it still gets stuck at the boot circle. Then it displays the two messages "unfortunately, setup wizard has stopped" and the other one. No change at all other then a lock at the bottom of the screen when the google logo comes up.
Install the Nexus 7 factory image instead of flash to a different custom ROM. Then I recommend getting MultiRom so you have your stock ROM to fall back on when experimenting for exact situations like this.
OMG got it thanks for all the help
I have a 2012 Nexus 7. At the time it had a locked bootloader but it was rooted with cm11 & TWRP on board. I downloaded the Nexus toolkit & tried to upgrade to lollipop when it was officially released. Somewhere along the line, I think the system partition got corrupted. I can manually flash all IMG files except system. I can get into bootloader & recovery. I even tried flashing TWRP again to reflash cm. TWRP took but cm failed to install. Anyone else have this issue? The tablet appears to boot but it just gets stuck at the Google screen with the lock at the bottom. Never goes past that point. Any help to revive this tablet would be much appreciated.
Beast84 said:
I have a 2012 Nexus 7. At the time it had a locked bootloader but it was rooted with cm11 & TWRP on board. I downloaded the Nexus toolkit & tried to upgrade to lollipop when it was officially released. Somewhere along the line, I think the system partition got corrupted. I can manually flash all IMG files except system. I can get into bootloader & recovery. I even tried flashing TWRP again to reflash cm. TWRP took but cm failed to install. Anyone else have this issue? The tablet appears to boot but it just gets stuck at the Google screen with the lock at the bottom. Never goes past that point. Any help to revive this tablet would be much appreciated.
Click to expand...
Click to collapse
Can you enter recovery or fastboot mode? If so, use either to attempt and repair (format) the system partition, then reflash the ROM of your choice.
PrizmaticSmoke said:
Can you enter recovery or fastboot mode? If so, use either to attempt and repair (format) the system partition, then reflash the ROM of your choice.
Click to expand...
Click to collapse
I already did. I flashed stock recovery & factory reset. Still the same thing. I flashed TWRP, the roms flashed through there just fail
Bumping to see if anyone else can help...
Beast84 said:
I already did. I flashed stock recovery & factory reset. Still the same thing. I flashed TWRP, the roms flashed through there just fail
Click to expand...
Click to collapse
In Twrp recovery,
1. go to wipe menu and advanced wipe.
2. select system partition then tap repair.
3.Flash your rom
Paramesh96 said:
In Twrp recovery,
1. go to wipe menu and advanced wipe.
2. select system partition then tap repair.
3.Flash your rom
Click to expand...
Click to collapse
Ok so that worked to flash cm but will this continue to happen if I try flashing the official lollipop update? I'm trying to return to stock so I can give the tablet to my nephew. I don't want him jumping into recovery or bootloader & wrecking it for good
Hello everyone,
i just flashed the newest Pure Nexus Rom and everything went fine.
I forgot to flash the SuperSU Zip so i tried to got back into TWRP, but now it stuck.
The System boots normally, only TWRP wont boot.
Anyone had that problem too?
if anyone else has the same issue, here is the answer:
I forgot to erase the userdata or cache.
If you have the same problem use fastboot!
fastboot format cache
fastboot format userdata
Then it should work again.
(Everything on your own risk)
If you dont flah SuperSU asap, TWRP will not stick on reboot (w nougat). That was the issue.
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
kaufikauf said:
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
Click to expand...
Click to collapse
Exactly. It happened before you flashed SuperSU zip. Not flashing SuperSU caused your problem. It needs to be flashed the first time you go into TWRP or you won't be able to boot back into TWRP. The previous poster is correct.
Maybe we talk about different problems
Ive formatted cache and userdata yesterday,
now i can go back into twrp.
(SuperSU is not flashed now).
Just tried it, works perfectly!
kaufikauf said:
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
Click to expand...
Click to collapse
I never, ever flash userdata, and never had an issue.
We can agree to disagree. Either the other poster and I arent understanding your question, or you arent understanding our reply. It's cool, it happens.
But TWRP not sticking is due to not running SuperSU at the end of the install process. It wont stick.
And now i know the misunderstanding!
My sentence was a little bit silly formulated:
It didnt stuck by flashing SuperSU. I just forgot to do that and when i recognized this, i want to boot into recovery. Then i recognized the bootloop.
So SuperSU as itself was not involved. By the way BeansTown wrote in the Thread for PureNexus Rom that you have to format your userdata (normally over TWRP).
Shame on me that i didnt read before start flashing
kaufikauf said:
And now i know the misunderstanding!
My sentence was a little bit silly formulated:
It didnt stuck by flashing SuperSU. I just forgot to do that and when i recognized this, i want to boot into recovery. Then i recognized the bootloop.
So SuperSU as itself was not involved. By the way BeansTown wrote in the Thread for PureNexus Rom that you have to format your userdata (normally over TWRP).
Shame on me that i didnt read before start flashing
Click to expand...
Click to collapse
You should take a look at this post in the official TWRP thread for a clearer reason why.
SlimSnoopOS said:
You should take a look at this post in the official TWRP thread for a clearer reason why.
Click to expand...
Click to collapse
So I followed the guide and updated to 7.1.1 and did the normal "fastboot flash recovery xxx" then "fastboot reboot bootlader" then rebooted it via phone I go to "Recovery" from my phone and I get a screen saying "No Command" I tried to flash twrp-3.0.3-0-angler.img
Did I miss something?
USFguy said:
So I followed the guide and updated to 7.1.1 and did the normal "fastboot flash recovery xxx" then "fastboot reboot bootlader" then rebooted it via phone I go to "Recovery" from my phone and I get a screen saying "No Command" I tried to flash twrp-3.0.3-0-angler.img
Did I miss something?
Click to expand...
Click to collapse
After flashing TWRP from the bootloader, go directly into recovery and flash SuperSU 2.78 or newer to make it stick permanently.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
After flashing TWRP from the bootloader, go directly into recovery and flash SuperSU 2.78 or newer to make it stick permanently.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
It won't boot into recovery, I flash recovery, unplug device hit recovery boot and it boot loops once then boots normally....
USFguy said:
It won't boot into recovery, I flash recovery, unplug device hit recovery boot and it boot loops once then boots normally....
Click to expand...
Click to collapse
Hmm. If you are on stock, reflash the boot, system, recovery, and vendor from the factory image that matches your stock, security update. Restart the phone and boot into Android. Restart into the bootloader then fastboot flash recovery TWRP-angler.img. See if it lets you boot into TWRP then. If not, try an older version of TWRP and see if that will flash and allow you to boot into it.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
Hmm. If you are on stock, reflash the boot, system, recovery, and vendor from the factory image that matches your stock, security update. Restart the phone and boot into Android. Restart into the bootloader then fastboot flash recovery TWRP-angler.img. See if it lets you boot into TWRP then. If not, try an older version of TWRP and see if that will flash and allow you to boot into it.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Tried that, ended up going down an update in TWRP and it worked, weird....
I had a similar issue and I had to go back in and reflash Recovery image to recovery partition and all was well
Hi guys, been using my rooted but otherwise stock OOS rom with TWRP and Magisk for the past few weeks. Today I decided to take the plunge and try either the Lineage OS or Resurrection Remix roms.
I'm using the latest OFFICIAL TWRP.
So I decrypted following the instructions to flash "no-verity-opt-encrypt-5.1.zip", then format data. All went well, so I then sent over the ROMS I wanted to try out. I started with the official ResurrectionRemix. Bootloop. Then the unofficial LineageOS. Bootloop.
Ok, well I guess I'm not gonna get to use any of the cool new OS's for awhile. I'll install the full stock firmware zip so I can have a working phone again. Bootloop.
Now when I say bootloop, the phone is booting to the BootAnimation and just repeating it. It shows the proper boot animation for whatever zip I have installed (resurrection/LOS/OOS), but it stays on there for up to 20 minutes before I have to hard reboot to the recovery again.
I decided to install the stock recovery trying a few methods. I first tried the ALL-IN-ONE tool. It said it flashed the recovery fine, so I booted to the recovery and after staying on a black screen for too long, the language options came up and I sighed a breath of relief. But before I could select English with the volume buttons, it rebooted by itself. It did this again when I manually entered recovery. So I figured maybe the tool flashed the wrong version, so I googled stock recovery for OnePlus 5, I found a few random links for stock recoveries for the OP5 and flashed them, but they more or less do the same thing or not boot at all.
I've tried changing the filesystem for both Data and System using any combinations of EXT4 and F2FS. Everything results in boot animation bootloops.
I have been flashing Roms since the Samsung Galaxy S3 and every phone since and never had any problems.
Currently when trying to install the stock Full OOS official zip with TWRP, the phone won't even go to the boot animation, it only goes to a black screen with the top LED in a light blue color.
I have also tried every version of TWRP there is for the OnePlus 5. Unofficial, Official, 3.1.1-0 and 3.1.1-1.
So I guess my question is....What filesystem is each partition supposed to be on and for which OS?
Lineage based:
System: ?
Data: ?
OOS Based:
System: ?
Data: ?
And any ideas on getting my phone running again?
And anyone have an official confirmed working version of the stock recovery? The one from ALL-IN-ONE TOOL doesn't work for me. It loads the language selection, then the screen goes black with a light blue LED on the top of the phone.
Actually I'm getting that on some roms instead of the bootanimation, like FreedomOOS. What does it mean when you have a black screen and a white LED?
Man, I really thought I was getting somewhere. If I boot into TWRP, change the Data partition to "F2FS", then flash the stock recovery, the stock recovery will boot, however, when inside the stock recovery and I try to flash the stock zip, it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
Ok, I have the official stock recovery from the OnePlus site, but still can't use it. Here is was happens depending on how I left it with TWRP:
System: F2FS
DATA: F2FS
- Stock recovery will load after some time, freeze, then the screen goes black with white LED on top.
System: EXT4
DATA: F2FS
- Stock recovery loads fine, I can go through the settings and install from SD card, but when I do it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
System: EXT4
DATA: F2FS
- If I try to flash stock rom through TWRP, it just boot loops on the animation forever.
I have now also tried flashing the stock boot.img, but no difference.
I have 2 things you can try!
First, replace the bootloader with stock and do a factory reset:
1. flash the stock recovery over
2. then in fastboot mode enter, fastboot oem lock (This forces the phone to wipe cache and data, and also do a complete reset)
Did it work? if yes YAY if not go to Second!
Second if your system.img is ****ed up you have to replace it!
Download the newest version of the stock rom from oneplus link here
Unpack it
research how to use an extractor to convert the system.new.dat to system.img
once thats completed enter fastboot mode and flash the new system.img over with Fastboot flash system system.img
now go into recovery and do a factory reset and wipe cache, and dalvik
Please reply back wether or not this work
"Ihave 2 things you can try! First, replace the bootloader with stock and do a factory reset..."
Is the bootloader simply the boot.img?
After doing the first thing, it simply says that the device is corrupt and will not boot. But it is locked again.
But I will have to unlock it again to do any further flashing.
Hmm, I think I may have gotten it. After unlocking again, flashing the stock recovery and boot.img, then locking again and wiping in the stock recovery, I have finally booted into the stock rom.
I still have no idea what went wrong, and I really want to know, so that in the future I can flash other Roms, like LineageOS.
I mean, I followed the steps exactly.
If it says the device is corrupt it simply means you got something else besides stock rom.
So now unlock it and try the system.img instead
It was because I still had TWRP with the stock rom.
I got it working though, thanks for your help.
Do you have any idea on what might have went wrong when trying to flash the lineageOS based roms and why it got messed up so royally?
Great to hear you fixed it ^_^
Probably some minor bug, if you wanna try installing lineageos again use the 3.1.1 TWRP build that supports backups and do a full backup so you don't have to go thru all this again
---------- Post added at 12:17 AM ---------- Previous post was at 12:13 AM ----------
Not really just try again but remember to use TWRP 3.1.1, as 3.1.0 don't support backup and probably have been part of your problem
If your trying again and gets it successfully installed could you do me a favor and test if Drivedroid works on it? And pm me the result, I'm looking for a rom where Drivedroid will work... Haven't found one so far
You know, I did do a backup with the OFFICIAL TWRP, but it also resulted in a bootloop. I made the backup after decrypting, so I don't know why it bootlopped.
https://forum.xda-developers.com/oneplus-5/development/rom-unified-lineageos-7-1-2-t3635483
Is this the one you tried installing?
I tried like every ROM at one point yesterday, but I think I started with
https://forum.xda-developers.com/oneplus-5/development/rom-resurrection-remix-n-7-1-2-t3636578
Did you remember Gapps?
Also in some cases its better not to root before you have the custom rom running, you usually only need a custom bootloader like TWRP
Yeah, I tried with Gapps, and I never rooted before first trying to boot.
As of yesterday Ressurrection remix, released the first official stable build so try again your should'nt have any problems if you follow the guide 100%
Ever find a solution? I'm stuck here now. Can't get any ROM to boot up, they all get stuck on the boot animation
Bump. I am also stuck in this state