Related
Hi Guys,
today I wanted to flash the latest Stock ROM for my device via ODIN. I've done this many times before and (thought) I knew what I was doing. It is my third Phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly I wasn't aware that this particular device was locked.
After downloading the international firmware I tried to install it and ODIN got stuck while writing the system.img. After that my phone did not boot up (of course). After that I downloaded and tried to isntall the firmware of the carrier, but I had the exact same issue. When I turn my device on I get to an error screen which tells me to execute an "emergency recovery" via the Samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
FRP hinders me to install a custom recovery and the stock one does not allow any isntallations via ADB or SD card.
My qustion is: Does anyone know how I can install a rom from here?
I know that I had to have made some changes prior to the flashing, but as I said I was not aware and an Idiot for not double checking.
Since it is not bricked yet I suppose there must be an answer but I can't find anything.
Thanks in advance
Edit:
After only installing the stock bootloader, I am autmaticly entering it when I boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"
Fix
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
fabivons said:
hi guys,
today i wanted to flash the latest stock rom for my device via odin. I've done this many times before and (thought) i knew what i was doing. It is my third phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly i wasn't aware that this particular device was locked.
After downloading the international firmware i tried to install it and odin got stuck while writing the system.img. After that my phone did not boot up (of course). After that i downloaded and tried to isntall the firmware of the carrier, but i had the exact same issue. When i turn my device on i get to an error screen which tells me to execute an "emergency recovery" via the samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
Frp hinders me to install a custom recovery and the stock one does not allow any isntallations via adb or sd card.
My qustion is: Does anyone know how i can install a rom from here?
I know that i had to have made some changes prior to the flashing, but as i said i was not aware and an idiot for not double checking.
Since it is not bricked yet i suppose there must be an answer but i can't find anything.
Thanks in advance
edit:
After only installing the stock bootloader, i am autmaticly entering it when i boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"
Click to expand...
Click to collapse
have u solved your problem ? This problem i am facing on the s7edge nougat ? Plz help ?
Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might be worth a try!
Good luck!
Fabivons said:
Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might me worth a try!
Good luck!
Click to expand...
Click to collapse
y i have done that and the device boots up but some applications force close and when i insert the memory card , the phone gets restarted everytime
Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Tell us in detail now.
SjDU said:
Tell us in detail now.
Click to expand...
Click to collapse
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?
suhaibahmad said:
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?
Click to expand...
Click to collapse
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.
Fabivons said:
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.
Click to expand...
Click to collapse
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally
suhaibahmad said:
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally
Click to expand...
Click to collapse
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.
Fabivons said:
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.
Click to expand...
Click to collapse
thats your kindness , yes i have performed the factory reset several times from recovery , but when i trying to reset it from settings , it goes after restart to recovery with dm-verity error , then i wipe and factory reset from there
Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model
SjDU said:
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model
Click to expand...
Click to collapse
Well FRP has to be turned off (the button in the menu is called "OEM unlock, the button has to be set to on which deactivates FRP). You don't mention using a PIT file - did you use one?
hi all,
first sorry for my bad english.
andorid version 6.0.1, rooted.
i have two problems
first, phone is single sim, but in settings shows "manage sim cards" phone is no g935FD, phone is g935F, but phone works ok.
second, when i update with odin, firmware form sammobile, i can't connect on network, my sim card can't work.
i backup all with flashfire, and when i restore all expect EFS and modem firmware, phone still does't work, and with efs work.
my phone is gift from cousin, and that in settings show only one sim and phone is rooted too.
After that I tried, and I told you what happened.
please help me how to update to 7.0, and how to solve problem with sim.
i tried to update with odin, but when i restore efs and modem, phone, can't connect on network.
UP !
Up !!
Anyone ?
Upppppp
Antonije123 said:
hi all,
first sorry for my bad english.
andorid version 6.0.1, rooted.
i have two problems
first, phone is single sim, but in settings shows "manage sim cards" phone is no g935FD, phone is g935F, but phone works ok.
second, when i update with odin, firmware form sammobile, i can't connect on network, my sim card can't work.
i backup all with flashfire, and when i restore all expect EFS and modem firmware, phone still does't work, and with efs work.
my phone is gift from cousin, and that in settings show only one sim and phone is rooted too.
After that I tried, and I told you what happened.
please help me how to update to 7.0, and how to solve problem with sim.
i tried to update with odin, but when i restore efs and modem, phone, can't connect on network.
Click to expand...
Click to collapse
Can you please provide your device exact model number? It is printed below on the back panel of your phone..Then can suggest you exact stock firmware to flash using odin
DroidHackeR said:
Can you please provide your device exact model number? It is printed below on the back panel of your phone..Then can suggest you exact stock firmware to flash using odin
Click to expand...
Click to collapse
Model is g935f.
I tried superstock room, but again problem with network connect
Antonije123 said:
Model is g935f.
I tried superstock room, but again problem with network connect
Click to expand...
Click to collapse
What do you mean by superstock room? You need to flash latest nought 7.0 stock firmware for your device..
1)Go to the link provided below and select country for your device and download latest 7.0 firmware using free member through registration
https://www.sammobile.com/firmwares/database/SM-G935F/
AFTER THAT FOLLOW ODIN FLASHING GUIDE PROVIDED BELOW
1)You can flash stock firmware for you specific device and country using sammobile.com as a free member registration* Remember to download latest stock firmware for your specific model number and country, you can find your model number printed below on back panel of your phone*
2)Go there in firmware section and enter your device model no and country..( Save it to pc and extract it on your pc in particular firmware folder, you will now find tar.md5 file in that folder)..Now download latest versions of odin and Samsung usb drivers for your device( Extract those files as you did with firmware, install latest usb drivers on pc)
3)From your phone's setting>about device>software info>press build version for 7-8 times continuesly to enable developers option
4)You can find developers option below setting>about device..From developers option select oem unlocking and usb debugging enabled
5)Now connect your phone to pc in download mode( Press volume down+home+power button simultaneously, you are now in download mode..press volume up button to continue)
6) Run odin as device administrator on your pc from odin extracted folder, let pc to install device drivers and your device will be highlighted in odin..
7)Add previously extracted tar.md5 file of stock firmware in AP tab of odin, give it some time to be ready..In odin options let auto reset and reboot options checked..*Dont check repatriation option*
8) Now click start button in odin, flashing process have been started..Sit back and relax untill firmware is being flashed..After that your device will be automatically rebooted and you will have latest stock firmware on your device..
*DO IT ON YOUR OWN RISK NOR I NEITHER ANYONE FROM XDA FORUM WILL BE RESPONSIBLE FOR ANY DAMAGE OR BRICK OF YOUR DEVICE*
DroidHackeR said:
What do you mean by superstock room? You need to flash latest nought 7.0 stock firmware for your device..
1)Go to the link provided below and select country for your device and download latest 7.0 firmware using free member through registration
https://www.sammobile.com/firmwares/database/SM-G935F/
AFTER THAT FOLLOW ODIN FLASHING GUIDE PROVIDED BELOW
1)You can flash stock firmware for you specific device and country using sammobile.com as a free member registration* Remember to download latest stock firmware for your specific model number and country, you can find your model number printed below on back panel of your phone*
2)Go there in firmware section and enter your device model no and country..( Save it to pc and extract it on your pc in particular firmware folder, you will now find tar.md5 file in that folder)..Now download latest versions of odin and Samsung usb drivers for your device( Extract those files as you did with firmware, install latest usb drivers on pc)
3)From your phone's setting>about device>software info>press build version for 7-8 times continuesly to enable developers option
4)You can find developers option below setting>about device..From developers option select oem unlocking and usb debugging enabled
5)Now connect your phone to pc in download mode( Press volume down+home+power button simultaneously, you are now in download mode..press volume up button to continue)
6) Run odin as device administrator on your pc from odin extracted folder, let pc to install device drivers and your device will be highlighted in odin..
7)Add previously extracted tar.md5 file of stock firmware in AP tab of odin, give it some time to be ready..In odin options let auto reset and reboot options checked..*Dont check repatriation option*
8) Now click start button in odin, flashing process have been started..Sit back and relax untill firmware is being flashed..After that your device will be automatically rebooted and you will have latest stock firmware on your device..
*DO IT ON YOUR OWN RISK NOR I NEITHER ANYONE FROM XDA FORUM WILL BE RESPONSIBLE FOR ANY DAMAGE OR BRICK OF YOUR DEVICE*
Click to expand...
Click to collapse
If i only flash ap phone can't run.
Superstock room i downloaded form xda.
Yes i know everything you wrote, but when flash stock firmware my phone on search network show one network, and show that's my phone g935fd.
First time when i update phone, i must send at service, and my phone was been rooted on 6.01 and single sim(g935f) .
I tried to install stock 6.01 via odin from sammobile but don't work
Antonije123 said:
If i only flash ap phone can't run.
Superstock room i downloaded form xda.
Yes i know everything you wrote, but when flash stock firmware my phone on search network show one network, and show that's my phone g935fd.
First time when i update phone, i must send at service, and my phone was been rooted on 6.01 and single sim(g935f) .
I tried to install stock 6.01 via odin from sammobile but don't work
Click to expand...
Click to collapse
You should flash 7.0 latest nougat for your device model no and country instead of 6.0.1 through odin..Try to flash 7.0 stock firmware instead of superstock rom or stock 6.0.1..If you are running your phone well and have root access..Download Samsung phone info app..Grant root access and provide me screen-shot of information shown in that application here..So i can suggest you proper stock firmware to be flashed using odin
DroidHackeR said:
You should flash 7.0 latest nougat for your device model no and country instead of 6.0.1 through odin..Try to flash 7.0 stock firmware instead of superstock rom or stock 6.0.1..If you are running your phone well and have root access..Download Samsung phone info app..Grant root access and provide me screen-shot of information shown in that application here..So i can suggest you proper stock firmware to be flashed using odin
Click to expand...
Click to collapse
Ss
Antonije123 said:
Ss
Click to expand...
Click to collapse
Nougat is still not available for your country..So you have flashed latest stock 6.0.1 firmware using odin? Still you are not getting network signal? After flashing stock firmware don't restore your efs, it will be restored automatically after flashing...Now just again flash the stock 6.0.1 available on sammobile and after flashing when you see Samsung logo, simply press volume down+power button now your screen will turn off..immediately Press volume up+power+home button simultaneously untill you see Samsung galaxy logo, now release keys and you will boot into stock recovery..From there choose wipe data/factory reset option..After reset, reboot your phone..And see if singal back again or not?
DroidHackeR said:
Nougat is still not available for your country..So you have flashed latest stock 6.0.1 firmware using odin? Still you are not getting network signal? After flashing stock firmware don't restore your efs, it will be restored automatically after flashing...Now just again flash the stock 6.0.1 available on sammobile and after flashing when you see Samsung logo, simply press volume down+power button now your screen will turn off..immediately Press volume up+power+home button simultaneously untill you see Samsung galaxy logo, now release keys and you will boot into stock recovery..From there choose wipe data/factory reset option..After reset, reboot your phone..And see if singal back again or not?
Click to expand...
Click to collapse
Can you send me link for what country to download? I download for slovenia 6.01 but still don't work, and i must restore efs,preload and modem firmware.
App i used to backup ans restore flashfire. I don't konw what is preload but is very important to signal.
Antonije123 said:
Can you send me link for what country to download? I download for slovenia 6.01 but still don't work, and i must restore efs,preload and modem firmware.
App i used to backup ans restore flashfire. I don't konw what is preload but is very important to signal.
Click to expand...
Click to collapse
Try this one as your csc in TOP and country is serbia-russia..Flash it using odin and report..By the way before flashing enable OEM UNLOCKING and USB DEBUGGING from developers option..
Link- https://www.sammobile.com/firmwares/download/89389/G935FXXU1BPH6_G935FTOP1BPH1_TOP/
JUST FLASH AS I INSTRUCTED ABOVE IN FIRST POST I.E.HOW TO FLASH STOCK FIRMWARE USING ODIN AND DO FACTORY RESET VIA STOCK RECOVERY AFTER FLASHING AS I SAID IN MY PREVIOUS POST
DroidHackeR said:
Try this one as your csc in TOP and country is serbia-russia..Flash it using odin and report..By the way before flashing enable OEM UNLOCKING and USB DEBUGGING from developers option..
Link- https://www.sammobile.com/firmwares/download/89389/G935FXXU1BPH6_G935FTOP1BPH1_TOP/
JUST FLASH AS I INSTRUCTED ABOVE IN FIRST POST I.E.HOW TO FLASH STOCK FIRMWARE USING ODIN AND DO FACTORY RESET VIA STOCK RECOVERY AFTER FLASHING AS I SAID IN MY PREVIOUS POST
Click to expand...
Click to collapse
Ok, flash only ap or bl, ap, cp,csc ?
Antonije123 said:
Ok, flash only ap or bl, ap, cp,csc ?
Click to expand...
Click to collapse
This is single bundled firmware including ap,cp,bl in it and it is have to flash as AP only..
DroidHackeR said:
This is single bundled firmware including ap,cp,bl in it and it is have to flash as AP only..
Click to expand...
Click to collapse
ok, i will try now, and report here after done
up: after flash i have again two sim, and on search network show me only one network witch is not mine.
Antonije123 said:
ok, i will try now, and report here after done
up: after flash i have again two sim, and on search network show me only one network witch is not mine.
Click to expand...
Click to collapse
Ohhhk now one more tutorial for you and it will help you i guess
1) Download samsung smartswitch application for windows from the link provided below
http://samsungsmartswitch.org/
2) Install latest samsung usb drivers for your s7 edge from below
http://samsungusbdriver.com/download/samsung-driver-v1-5-63-0
3)Now install both samsung smart switch and samsung usb drivers on your windows pc
4) Open samsung smart switch as device administrator on your pc
5) Power off your device and press volume down+home+power button simultaneously untill you get into download mode, now press volume up to continue
6)After installing usb drivers for your phone by pc, your device will be recognised in smart switch
7) Select emergency software recovert option from smart switch
8) It will ask you some information like model no and serial no ( You can find model no and serial no printed below on back panel of phone or on the box of phone)
9) After providing such information, smart switch will locate latest and correct software version to be installed for your device
10) Start update and sit back..It will take some time to update software..After that your device will be reboot and if you are facing bootloop i.e. stuck at samsung logo follow factory reset process i have provided earlier( While your phone stuck at samsung logo for long time, press volume down+power button, screen will turn off now immediatly press volume up+power+home button simultaneously untill you see samsung galaxy s7 edge logo..Now release buttons, you will boot into stock recovery..From there choose wipe data/factory reset option..After reset complete, reboot your device)
*IF SMART SWITCH FAILS TO DETECT YOUR DEVICE, UNINSTALL SAMSUNG USB DRIVER AND INSTALL THEM AGAIN AND FOLLOW PROCESS AGAIN*
● You can refer this guide that how to find and restore exact firmware for your device using Smart switch before trying
https://www.sammobile.com/forum/showthread.php?t=29914
DroidHackeR said:
Ohhhk now one more tutorial for you and it will help you i guess
1) Download samsung smartswitch application for windows from the link provided below
http://samsungsmartswitch.org/
2) Install latest samsung usb drivers for your s7 edge from below
http://samsungusbdriver.com/download/samsung-driver-v1-5-63-0
3)Now install both samsung smart switch and samsung usb drivers on your windows pc
4) Open samsung smart switch as device administrator on your pc
5) Power off your device and press volume down+home+power button simultaneously untill you get into download mode, now press volume up to continue
6)After installing usb drivers for your phone by pc, your device will be recognised in smart switch
7) Select emergency software recovert option from smart switch
8) It will ask you some information like model no and serial no ( You can find model no and serial no printed below on back panel of phone or on the box of phone)
9) After providing such information, smart switch will locate latest and correct software version to be installed for your device
10) Start update and sit back..It will take some time to update software..After that your device will be reboot and if you are facing bootloop i.e. stuck at samsung logo follow factory reset process i have provided earlier( While your phone stuck at samsung logo for long time, press volume down+power button, screen will turn off now immediatly press volume up+power+home button simultaneously untill you see samsung galaxy s7 edge logo..Now release buttons, you will boot into stock recovery..From there choose wipe data/factory reset option..After reset complete, reboot your device)
*IF SMART SWITCH FAILS TO DETECT YOUR DEVICE, UNINSTALL SAMSUNG USB DRIVER AND INSTALL THEM AGAIN AND FOLLOW PROCESS AGAIN*
● You can refer this guide that how to find and restore exact firmware for your device using Smart switch before trying
https://www.sammobile.com/forum/showthread.php?t=29914
Click to expand...
Click to collapse
i tried, but that installated (DRE), and don't work
Antonije123 said:
i tried, but that installated (DRE), and don't work
Click to expand...
Click to collapse
You have tried both stock flashing through odin and also smart switch recovery still not getting any signal?? I think i have helped you in all possible ways i could suggest..Now you can either wait for any expertised advice or simply visit samsung service centre and ask them to restore you phone's original firmware...Sorry and Regards
Hi,
I realy need your help,
I have a S7 edge who is stuck at the samsung logo.
I have flashed some stock rom (all in 7.0) via odin 3.12 after a wipe factory but nothing. So i decided to try it with Kies and smartSwitch but still nothing.
I have access to recovery and download mode.
FRP lock: On
The phone is not rooted, and the usb debugging not enabled.
The phone print this in the download mode:
ODIN MODE
Download speed: FAST
Product-Name: SM-G935F
Current Binary: Samsung Official
System Status: Custom
FRP lock: ON
Secure Downlaod: Enabled
Warranty Void: 0(0x000)
RP SWREV: B:1 K:0 S:0
After the installation of the flashed rom in the download mode, the phone reboot with a blue screen, a progress bar but it stop to 32%, and then it is printed "erasing.." and the phone reboot and is still stuck.
I have re-tryed with Kies, now the phone is with a green screen with 2 white Gears : "android is starting" but it is still stuck (i let him all the night but nothing)
i don't know what to do
nonechap said:
Hi,
I realy need your help,
I have a S7 edge who is stuck at the samsung logo.
I have flashed some stock rom (all in 7.0) via odin 3.12 after a wipe factory but nothing. So i decided to try it with Kies and smartSwitch but still nothing.
I have access to recovery and download mode.
FRP lock: On
The phone is not rooted, and the usb debugging not enabled.
The phone print this in the download mode:
ODIN MODE
Download speed: FAST
Product-Name: SM-G935F
Current Binary: Samsung Official
System Status: Custom
FRP lock: ON
Secure Downlaod: Enabled
Warranty Void: 0(0x000)
RP SWREV: B:1 K:0 S:0
After the installation of the flashed rom in the download mode, the phone reboot with a blue screen, a progress bar but it stop to 32%, and then it is printed "erasing.." and the phone reboot and is still stuck.
I have re-tryed with Kies, now the phone is with a green screen with 2 white Gears : "android is starting" but it is still stuck (i let him all the night but nothing)
i don't know what to do
Click to expand...
Click to collapse
You have to use smart switch emergency recovery function to restore your phone. It is a stand alone function within smart switch.
All you need is your phone model and serial number.
Apparently you missed a step when preparing your phone for flashing.
Or you can continue to use Odin which when you plug the USB in will show that a connection is made even though the phone says it's not in download mode.
Cosmic Blue said:
You have to use smart switch emergency recovery function to restore your phone. It is a stand alone function within smart switch.
All you need is your phone model and serial number.
Apparently you missed a step when preparing your phone for flashing.
Click to expand...
Click to collapse
I did an emergency recovery with my phone model and serial, same with kies.
nonechap said:
I did an emergency recovery with my phone model and serial, same with kies.
Click to expand...
Click to collapse
If that did not work, it looks like the memory chip on the mother board is damaged. Take it in if it is still under warranty.
Cosmic Blue said:
If that did not work, it looks like the memory chip on the mother board is damaged. Take it in if it is still under warranty.
Click to expand...
Click to collapse
it is not under warranty anymore, should i replace the motherboard ?
@nonechap bro
upgrade you bootloader before flash nougat rom
bootloader is here
https://www.androidfilehost.com/?fid=529152257862714907
modem is here
https://www.androidfilehost.com/?fid=529152257862714909
open odin and boot your phone into download mode
[1]Connect phone and wait until you get a blue sign in Odin
[2]Place the desired BL file in the [BL] slot.
[3]Place the desired CP file in the [CP] slot.
[4] Go to the Options section and make sure Auto Reboot, Re-Partition and F. reset time are unmarked.
[5]Push [Start]
Once odin reports "Success..." message in the Message box, boot your phone into download mode again
then flash again 7.0 roms via odin
then boot in recovery and wipe data and cache
and reboot device
be patience first boot takes 15 minutes or more
if fail you cant boot your device untill system status changed to official due to knox restrictions or bootloader changed to latest
if not boot that means your bootloader not update by odin due to frp lock is on
if you are on marshmellow before flash 6.0.1 firmware to boot device
firmwares are here
https://www.sammobile.com/firmwares/database/SM-G935F/
i suggest if device boots unlock bootloader first to disable knox
hit thumbs up if i helped you
rony raj said:
@nonechap bro
upgrade you bootloader before flash nougat rom
bootloader is here
https://www.androidfilehost.com/?fid=529152257862714907
modem is here
https://www.androidfilehost.com/?fid=529152257862714909
open odin and boot your phone into download mode
[1]Connect phone and wait until you get a blue sign in Odin
[2]Place the desired BL file in the [BL] slot.
[3]Place the desired CP file in the [CP] slot.
[4] Go to the Options section and make sure Auto Reboot, Re-Partition and F. reset time are unmarked.
[5]Push [Start]
Once odin reports "Success..." message in the Message box, boot your phone into download mode again
then flash again 7.0 roms via odin
then boot in recovery and wipe data and cache
and reboot device
be patience first boot takes 15 minutes or more
if fail you cant boot your device untill system status changed to official due to knox restrictions or bootloader changed to latest
if not boot that means your bootloader not update by odin due to frp lock is on
if you are on marshmellow before flash 6.0.1 firmware to boot device
firmwares are here
https://www.sammobile.com/firmwares/database/SM-G935F/
i suggest if device boots unlock bootloader first to disable knox
hit thumbs up if i helped you
Click to expand...
Click to collapse
In this case, when i flash the rom, should i use the 4 files or only the AP file ?
nonechap said:
In this case, when i flash the rom, should i use the 4 files or only the AP file ?
Click to expand...
Click to collapse
use old odin
rony raj said:
use old odin
Click to expand...
Click to collapse
What version of odin should i use ?
And i have to use only the AP file or the 4 files of the 7.0 rom after the bootloader update? (AP BL CP CSC)
nonechap said:
What version of odin should i use ?
And i have to use only the AP file or the 4 files of the 7.0 rom after the bootloader update? (AP BL CP CSC)
Click to expand...
Click to collapse
odin v3.09 or 3.12
update bootloader and modem from given first post by me
rony raj said:
odin v3.09 or 3.12
update bootloader and modem from given first post by me
Click to expand...
Click to collapse
Yes i know but when i have updated the bootload with the 2 files you gave me, i have to reboot in download mod and flash the 7.0 rom, but i have download the rom and i have 4 files, so should i flash only the AP or the four files ?
nonechap said:
Yes i know but when i have updated the bootload with the 2 files you gave me, i have to reboot in download mod and flash the 7.0 rom, but i have download the rom and i have 4 files, so should i flash only the AP or the four files ?
Click to expand...
Click to collapse
tell me rom on your device before bootloop
6.0 or 7.0
rony raj said:
tell me rom on your device before bootloop
6.0 or 7.0
Click to expand...
Click to collapse
6.0.1
nonechap said:
6.0.1
Click to expand...
Click to collapse
then flash 6.0 firmware
download from here
https://www.sammobile.com/firmwares/database/SM-G935F/
rony raj said:
then flash 6.0 firmware
download from here
https://www.sammobile.com/firmwares/database/SM-G935F/
Click to expand...
Click to collapse
I tried but still nothing, i think i have to replace the motherboard ?
nonechap said:
I tried but still nothing, i think i have to replace the motherboard ?
Click to expand...
Click to collapse
try another chance
To do the S7 FRP OFF - Put phone in download mode
Once phone is in download mode.
Flash the files which i will provide.
You Only need to flash boot.tar via odin for respective models (example for s7 use G930 Qualcomm folder) for (s7 edge use G935 Qualcomm folder)
Once you flash the boot tar file. The phone will reboot and it will enable ADB. Run the Bat file which i will provide and it will remove the FRP lock
Once done put the phone in Downlaod mode and flash stock ROM.
The whole process takes less than 10 mins.
Same Idea for S7 Exynos phones... put phone in downlaod mode and then flash the file (G930F(ENGroot) for s7 models & (G935F_Root for s7 edge models). Once done phone will reboot. Then use this bat file (g935f.bat). Once this is executed locks will be removed and phone will go in download mode. Flash stock Boot.img and ALL DONE.
download
https://mega.nz/#!Tw0TAI6I!jCGuxGrwqCGEy3flcRqF9EpzbaTkby7SJ_slKRaXqRs
rony raj said:
try another chance
To do the S7 FRP OFF - Put phone in download mode
Once phone is in download mode.
Flash the files which i will provide.
You Only need to flash boot.tar via odin for respective models (example for s7 use G930 Qualcomm folder) for (s7 edge use G935 Qualcomm folder)
Once you flash the boot tar file. The phone will reboot and it will enable ADB. Run the Bat file which i will provide and it will remove the FRP lock
Once done put the phone in Downlaod mode and flash stock ROM.
The whole process takes less than 10 mins.
Same Idea for S7 Exynos phones... put phone in downlaod mode and then flash the file (G930F(ENGroot) for s7 models & (G935F_Root for s7 edge models). Once done phone will reboot. Then use this bat file (g935f.bat). Once this is executed locks will be removed and phone will go in download mode. Flash stock Boot.img and ALL DONE.
download
https://mega.nz/#!Tw0TAI6I!jCGuxGrwqCGEy3flcRqF9EpzbaTkby7SJ_slKRaXqRs
Click to expand...
Click to collapse
After flashing boot.tar, when i run the .bat, it says error: closed
EDIT: i have to enter into the recovery mod and select "adb update" in order to make my phone detected by my computer
Those files are for the S7. Do they work for the S7 Edge also?
Edit - I tried it and it fails in odin. My phone is bricked.
rony raj said:
@nonechap bro
upgrade you bootloader before flash nougat rom
bootloader is here
https://www.androidfilehost.com/?fid=529152257862714907
modem is here
https://www.androidfilehost.com/?fid=529152257862714909
open odin and boot your phone into download mode
[1]Connect phone and wait until you get a blue sign in Odin
[2]Place the desired BL file in the [BL] slot.
[3]Place the desired CP file in the [CP] slot.
[4] Go to the Options section and make sure Auto Reboot, Re-Partition and F. reset time are unmarked.
[5]Push [Start]
Once odin reports "Success..." message in the Message box, boot your phone into download mode again
then flash again 7.0 roms via odin
then boot in recovery and wipe data and cache
and reboot device
be patience first boot takes 15 minutes or more
if fail you cant boot your device untill system status changed to official due to knox restrictions or bootloader changed to latest
if not boot that means your bootloader not update by odin due to frp lock is on
if you are on marshmellow before flash 6.0.1 firmware to boot device
firmwares are here
https://www.sammobile.com/firmwares/database/SM-G935F/
i suggest if device boots unlock bootloader first to disable knox
hit thumbs up if i helped you
Click to expand...
Click to collapse
Works !!!
Sorry to revive an old thread but I think it might help people recover from a bootloop with a bit of addtional explanation than initially provided.
So I have an S7 Edge as a backup phone and hadn't used it for a while. Google FRP was activated. I tried to update to a newer firmware through Odin (can't OTA since it's from Tmo and i'm in Canada). Anyways for whatever reason it failed in the middle and I was stuck in a bootloop that wouldn't stop. I tried downgrading, I tried factory, I tried new versions, nothing would do, I'm assuming because of FRP.
So I followed Rony Raj's post https://forum.xda-developers.com/showpost.php?p=71906126&postcount=17 but kept getting stuck. The thing is once you flash the proper Boot.tar file, the phone will appear to still be in a bootloop. You will have to go with the screen (the phone) and the sound of the connection and disconnection from your computer. So basically just sync with the sounds and time it so you open the ''S7 & S7 Edge QUALCOMM.bat'' file at the exact time your phone reconnects and it'll work. I had to do it about 6-7 times before i got it right.
When that is done your phone will restart in download mode. When you do just flash the latest version of the firmware you get from AndroidFileHos*.com or Sammobil*.com. Make sure you select all 4 files in Odin (BL, AP, CP and SELECT CSC HOME for CSC - NOT CSC).
Once all that is done your phone will restart and everything should be fine, well that worked for me
Thanks a lot to @rony raj for putting together the files and the steps to save my G935
Summary: My tablet is soft-brick now. Can only access to Download (ODIN) mode. I have tried 2,3 different firmwares, tried 3 versions of ODIN. But it doesn't work.
Here is the story:
I bought this tablet from bestbuy (USA)
I only wanted to root my tab A 7.0 SM-T280.
I enabled the OEN unlock from the developer mode.
Then I tried to flash the TWRP by the tutorial from this topic by @ashyx :
To install TWRP:
1. Flash with ODIN 3.10.7 in the AP slot.
Uncheck Auto reboot.
2. Load the respective file below into the AP slot and hit start.
3. After flashing when ODIN says PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.
TWRP_3.0.2-1_SM-T280_261016
Click to expand...
Click to collapse
After flashing, on the download mode it showed: "SECURE CHECK FAIL: (RECOVERY)", then I reboot into recovery mode to access the TWRP but it said: "RECOVERY IS NOT SEANDROID FORCEFUL (although in ashyx topic said the SECURE FAIL is fine).
I still was able to reboot into the system this time.
And then I thought I should try another way. And then I came up with the TINKER ROM.
I tried to flash the Rom (v5) but somehow ODIN said FAIL.
I COULD NOT access the system since then.
Bu @zenful 's advices, I tried some different stock firmwares and different versions of ODIN just to get back to normal, but it never works.
Every time I flash, it always has the same problem:
- First try, ODIN fails at:
sboot.img
sboot2.img
complete (write) failed... (I don't remember though)
And in the download mode screen (from the phone) said:
SECURE CHECK FAIL (SBOOT)
SECURE CHECK FAIL (SBOOT2)
- Second try, ODIN fails at:
boot.img
system.img
Complete (write) fail...
And in the screen said:
SECURE CHECK FAIL (BOOT)
SECURE CHECK FAIL (RECOVERY)
I also tried emergency recovery mode in smart switch but it didn't solved the problem. One good thing (after I entered the tablet model and serial number) is that it showed "PHONE: QA4 CSC: PH3 (XAR)"
______________
I'm pretty sure that the problem doesn't come from fw nor from ODIN since I downloaded the fws from sammobile and updato and downloaded ODIN from xda (the latest version from samsungodin.com)
I'm seriously need a help right now. I just wanna have a rooted tablet so I can play game with my ps4 controller.
I have experienced with these flashing business. I rooted my galaxy s2, HTC desire c, HTC evo, etc. and so on, but have never done rooting in the last 1 year. I can attach some snapshots if you guys request
ngvhoang96 said:
Summary: My tablet is soft-brick now. Can only access to Download (ODIN) mode. I have tried 2,3 different firmwares, tried 3 versions of ODIN. But it doesn't work.
Here is the story:
I bought this tablet from bestbuy (USA)
I only wanted to root my tab A 7.0 SM-T280.
I enabled the OEN unlock from the developer mode.
Then I tried to flash the TWRP by the tutorial from this topic by @ashyx :
After flashing, on the download mode it showed: "SECURE CHECK FAIL: (RECOVERY)", then I reboot into recovery mode to access the TWRP but it said: "RECOVERY IS NOT SEANDROID FORCEFUL (although in ashyx topic said the SECURE FAIL is fine).
I still was able to reboot into the system this time.
And then I thought I should try another way. And then I came up with the TINKER ROM.
I tried to flash the Rom (v5) but somehow ODIN said FAIL.
I COULD NOT access the system since then.
Bu @zenful 's advices, I tried some different stock firmwares and different versions of ODIN just to get back to normal, but it never works.
Every time I flash, it always has the same problem:
- First try, ODIN fails at:
sboot.img
sboot2.img
complete (write) failed... (I don't remember though)
And in the download mode screen (from the phone) said:
SECURE CHECK FAIL (SBOOT)
SECURE CHECK FAIL (SBOOT2)
- Second try, ODIN fails at:
boot.img
system.img
Complete (write) fail...
And in the screen said:
SECURE CHECK FAIL (BOOT)
SECURE CHECK FAIL (RECOVERY)
I also tried emergency recovery mode in smart switch but it didn't solved the problem. One good thing (after I entered the tablet model and serial number) is that it showed "PHONE: QA4 CSC: PH3 (XAR)"
______________
I'm pretty sure that the problem doesn't come from fw nor from ODIN since I downloaded the fws from sammobile and updato and downloaded ODIN from xda (the latest version from samsungodin.com)
I'm seriously need a help right now. I just wanna have a rooted tablet so I can play game with my ps4 controller.
I have experienced with these flashing business. I rooted my galaxy s2, HTC desire c, HTC evo, etc. and so on, but have never done rooting in the last 1 year. I can attach some snapshots if you guys request
Click to expand...
Click to collapse
Try this: download your desire firmware via samfirm (BL+AP+CP+CSC when extracted) plus you need a pit file for your model with the same region as firmware and then flash (with 4 firmware files incl pit) via odin autoreboot+repartition+nand erase+f.reset time. At least you will get working stock tablet. It worked on my note 4 soft bricked.
Stixas said:
Try this: download your desire firmware via samfirm (BL+AP+CP+CSC when extracted) plus you need a pit file for your model with the same region as firmware and then flash (with 4 firmware files incl pit) via odin autoreboot+repartition+nand erase+f.reset time. At least you will get working stock tablet. It worked on my note 4 soft bricked.
Click to expand...
Click to collapse
Last time I tried download fw by using samfirm was last week and it didnt work. Can you test yours again?
And whre can I found the pit file? I dont think there is one in the internet right now.
Hello everyone!
I have a Samsung SM-G935F which after a system update (a patch) is no longer working, it's stuck in boot loop.
When I turn it on I get: Kernel Rev check file Device 1, Binary 0.
I can get into the Download Mode and it will be recognized by ODIN.
But I don't know how to proceed in order to solve the presented scenario. Can you help me out? Thanks!
Regards,
Oliver
Hi, First you need to try to perform a format through recovery,holding power+home+volume up.
If phone did not boot,Then download firmware from sammobile using an app called SamFrim you can find it by simple search on google.
After you downloaded thr firmware,Launch odin and boot your phone into download mode by holding power+home+volume down.
Extract the firmware and it will generate 5 files
AP
BL
CP
CSC
Home_Csc
Add every file to its correct place in odin
AP
CP
BL
Csc( don't use Home_Csc,Because we want to perform a full wipe)
Then hit start, be careful not to unplug the cable,once it's done phone will auto reboot,leave it,It will do everything by its own.
Btw you must use latest odin version because older version doesn't support Oreo roms
Good Luck