Hello,
After installing the AOSP based ROM when I returned STOCK version 4.2.2 device lost all ability of connecting to a computer and the WIFI connection as well. I tried every possible way such removal and new installation of all drivers + ADB change from MTP only charging etc. and so on, I've discouraged and need all the help please,
Thanks to all the help I'm really stuck here.:crying:
Hello!
I've go problem with connection to Remote Controller for phantom 4 pro. Remote Controller has USB host and I connect it tablet. There is too fast disappearing popup with question which USB app to run and i can't click OK. It not need USB debug.
The only solution is reboot tablet with connected USB and when it boot pop-up won't disappear and i can click OK and it works fine.
Popup title: "Choose an app for the USB device"
I have root. I tried MTP Enabler. Changing usb mode from mtp to ptp or rndis show popup for a 0.5 second.
How to solve this problem (dsiappearing popup)? There is any permission that i can set? How to debug it, is there any logs?
tosiaczus said:
Hello!
I've go problem with connection to Remote Controller for phantom 4 pro. Remote Controller has USB host and I connect it tablet. There is too fast disappearing popup with question which USB app to run and i can't click OK. It not need USB debug.
The only solution is reboot tablet with connected USB and when it boot pop-up won't disappear and i can click OK and it works fine.
Popup title: "Choose an app for the USB device"
I have root. I tried MTP Enabler. Changing usb mode from mtp to ptp or rndis show popup for a 0.5 second.
How to solve this problem (dsiappearing popup)? There is any permission that i can set? How to debug it, is there any logs?
Click to expand...
Click to collapse
Install the official Lineage 14.1 ROM. It works great and fixes the USB sometime issue with DJI Go 4. You won't regret it. Everything works including fingerprint reader. DJI Go works great, even when recording screen with DU Recorder. I used to see overheating messages on the Samsung firmware, but no issues with Lineage.
how to install lineage on t719? It is fo r @nswenson
There is no lineage for version with LTE. There is the same partition table? Bootloader?
Lineage is for Galaxy Tab S2 8.0 2016 (Wi-Fi) (gts28vewifi) - T713
We need it for Samsung Galaxy Tab S2 8.0 LTE (2016) (gts28velte) T719
I would be interested in this as well, as I have the same issue with my DJI RC.
I also have the Galaxy Tab S2 8.0 LTE (SM-T719Y).
Please help ...
Yt2...
---------- Post added at 06:46 PM ---------- Previous post was at 06:45 PM ----------
Would it be worthwhile reloading Nougat again???
Yt2...
After homework I have found a way to connect.
Start RC.
Start Aircraft.
Plug in pad (yes you will get the flashing screen).
Turn off the RC.
Turn back on RC.
All should be good.
Thai will have to do until Samsung or Android does an update...
This is not working - there is no video, fake connection.
You have to restart tablet with connected RC.
I just flew with mine today using the above method.
It is a pain in the butt but it will have to do until Android do a fix.
I have turned on developer mode.
Chris
Same problem here, only fix I can find is to reboot the tablet once rc and rpas are on. Pain in the butt but still better than being forced to use apple!
Hi Guys,
I have successfully downgraded my SM-T719Y LTE (Version 2) Tab S2 to Android 6.01.
Back to normality again with no hassles. Yippee.
I will post links shortly...
Yt2...
Turn everything COMPLETELY off. Power up RC and then the Mavic. Let them connect. Then plug in the USB cable and fire up the S2. Should load the Go 4 app directly and you should be up and running. If not just start the app after the tablet has fully booted. You have to do this every single time though.
Hi did you tried LineageOS 15.1 with DJI GO4 ?
donrosko said:
Hi did you tried LineageOS 15.1 with DJI GO4 ?
Click to expand...
Click to collapse
Installed yesterday, it works fine, USB can be inserted and removed as long as desired. I will test further.
Hello devs and all miui fans
So, its already about months by now having problems with USB tethering/MTP mode. PC noticed like "USB device malfunction...."
I cannot conected my device to PC via MTP mode. I was tried to On/off debugging, on/off mtp-ptp (in CusRom), switch USB Cable, but all of that suggestions doesnt working.
There is no option but charging when i connected my R2P to PC via USB cable,but the strange that is "i can flash via fastboot, means that there is no issue bout cable/pc/or my device hardware right?"
Already tried many ways that available in this forum or outside (sorry cannot attach link, im too confuse lol) such 3rd party app, clean re flash STOCK ROM, and intsall/uninstall drivers on pc, but the problems cannot fixed.
please help me, im desperate and you know how useless smartphone if it cannot transfering media data from/to PC via MTP. I've attached screenshoot from setting>network>more>and there you can see that the usb thetering option are disabled (grayed out)
Thanks, and sorry bout my english
Hello everyone,
first sorry for my english.
I have Nexus 2012 with 3G modem. I had android 5.1.1 witch root and twrp, but was slowly and i made wipe. Then system doesn't work. I decide to install again 5.1.1 via nexus tool kit - tablet work. I connected rtl sdr dongle install sdr scanner - it's working. Reboot tablet and it doesn't work. So i tryed to install android 4.4.4 - and i have the same situation (of course have root) first install and sdr is working, reboot and it doesn't work. I have info " no connected device". Before i made wipe and tablet work slow everything worked fine. I use active hub, connect directly to otg cable - the same problem.
I don't have any idea. Could you help me? Dongle sdr connected to computer work.
Regards
Zbigniew
Hi,
I tried flashing the new v11 firmware via Odin. Unfortunately, i didnt work (i come from v10). Now i get that error message , that i´d have to use Smart Switch soft on PC to do an emergency recovery. Unfortunately it seems to find it (some usb plug in sounds appears in windows) but the device can´t be found. Whats the take here ?
The USB drivers seem to be installed fine. Thanks in advantage!