Related
/*
Usual Disclaimer: This is an untested compiled ROM. Expect nothing to work.
Dev/test team is not responsible for any bricked devices, wars or terrorist attacks because of the usage of this ROM.
All credits goes to:
- CyanogenMod team
- Brave heart people who will flash, test and report bugs
- Additional developers who will help with solving issues and adding features
*/
I have been finally able to compile CM12.1 for our beloved device. This compilation is pure unadulterated 12.1. The ROM is NOT TESTED AT ALL. EXPECT NOTHING 2 WORK!
All other goodies including screenshots, enhancements, etc. will follow.
Help needed for:
- Flashing, testing and putting out bug reports
- Providing solutions and re-basing to latest CM releases
XDA:DevDB Information
UNOFFICIAL CM12.1 Find5 ROM, ROM for the Oppo Find 5
Contributors
wolverine2k
Source Code: https://github.com/CyanogenMod/android
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Oppo Find5 Phone and a BRAVE HEART!
Based On: Pure Unadulterated CyanogenMod
Version Information
Status: No Longer Updated
Created 2015-07-14
Last Updated 2016-04-23
Reserved
FAQs:
Q: How do I flash the ROM?
A: Any recovery allowing ROM flashing should work. I am using OpenRecovery though.
Coming from Previous Version or if you want a dirty install:
1. boot into recovery
2. flash the Rom
3. reboot
Coming from Previous Version and if you want a clean install:
1. boot into recovery
2. do a full wife
3. flash the Rom
4. reboot
Coming from Any Other ROM:
1. Boot into Recovery
2. Do a full wife (format date, sysyem, preload & cache is the best)
3. Flash ROM
4. Flash Additional GAPPS if you want (GAPPS for 12.1 --> Slim_mini_gapps.BETA.5.1.build.0.x-20150812.zip)
5. Reboot
6. Don't restore system stuff or apps + data using Titanium, it might cause issues
Reserved
where I can download the rom to test ... ???
x1123 said:
where I can download the rom to test ... ???
Click to expand...
Click to collapse
Updated the main thread with the download link (http://forum.xda-developers.com/devdb/project/dl/?id=13745&task=get).
Cheers
no other info about what is working and whatnot?
Even you did not install it on your device? :angel:
grimpressive said:
no other info about what is working and whatnot?
Even you did not install it on your device? :angel:
Click to expand...
Click to collapse
Modified some kernel parameters to get the build working. Haven't been able to test everything but most of all should be working. The updated build is posted. Initial screenshots attached.
Greatly Improved Build: 29th July, 2015
Dear All,
There is a new CM12.1 build available which works pretty good. All CM 12.1 Features and Bugs apply. Can be used on a normal Device.
Status Updated to Release build.
Download from: http://forum.xda-developers.com/devdb/project/dl/?id=13787&task=get
Cheers,
wolverine2k said:
Dear All,
There is a new CM12.1 build available which works pretty good. All CM 12.1 Features and Bugs apply. Can be used on a normal Device.
Status Updated to Release build.
Download from: http://forum.xda-developers.com/devdb/project/dl/?id=13787&task=get
Cheers,
Click to expand...
Click to collapse
Hi, Ive just flashed this rom on my find5. Everthing work ok but sim. My mobile cannot regconize my sim so I cannot make a call. It says im on flight mode. I had already wiped all before flashing rom but no better. Do you have any idea about this issue.
Thanks
-
selphien said:
Hi, Ive just flashed this rom on my find5. Everthing work ok but sim. My mobile cannot regconize my sim so I cannot make a call. It says im on flight mode. I had already wiped all before flashing rom but no better. Do you have any idea about this issue.
Thanks
-
Click to expand...
Click to collapse
Uploaded a new build (UNOFFICIAL_cm_find5-20150807.zip). Please flash this one. I have now made 2 radio properties persistent which allows for delayed SIM card detection and restarts RIL if needed. See the updated screenshots which shows the radio signal strength.
Cheers.
Bugreport and Working CM12 setup that works on my find 5...
wolverine2k said:
New Build: 7th August 2015. New screenshots.
Fixes:
- Radio working again (2 radio property edits in build.prop).
/*
Usual Disclaimer:
Dev/test team is not responsible for any bricked devices, wars or terrorist attacks because of the usage of this ROM.
All credits goes to:
- CyanogenMod team
- Brave heart people who will flash, test and report bugs
- Additional developers who will help with solving issues and adding features
*/
I have been finally able to compile CM12.1 for our beloved device. This compilation is pure unadulterated 12.1. Most of the things should work!
Post your bugs/issues in this thread. Also attach logcat or kernel logs if possible. Any & all help is greatly appreciated.
All other goodies including screenshots, enhancements, etc. will follow.
Help needed for:
- Flashing, testing and putting out bug reports
- Providing solutions and re-basing to latest CM releases
XDA:DevDB Information
UNOFFICIAL CM12.1 Find5 ROM, ROM for the Oppo Find 5
Contributors
wolverine2k
Source Code: https://github.com/CyanogenMod/android
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Oppo Find5 Phone
Based On: Pure Unadulterated CyanogenMod
Version Information
Status: Stable
Created 2015-07-14
Last Updated 2015-08-07
Download Link http://forum.xda-developers.com/devdb/project/dl/?id=13870&task=get
Screenshots
Click to expand...
Click to collapse
Hi I'm new here on XDA so if my postings are messed up.... you'll know why:good:
I just tried flashing this rom and I can report that gapps dosn't work or at least gives an error that some functions do not work.
I then tried flashing an updated gapps 5.1 but same error here.... I gues its more a gapps thing than the rom itself.
I couldn't find other errors that, and it seems very stable :good:
My current setup that works is this:
cm-12-20150802-NIGHTLY-find5
gapps-5.0.x-20150404-minimal-edition-signed
apoulsen said:
Hi I'm new here on XDA so if my postings are messed up.... you'll know why:good:
I just tried flashing this rom and I can report that gapps dosn't work or at least gives an error that some functions do not work.
I then tried flashing an updated gapps 5.1 but same error here.... I gues its more a gapps thing than the rom itself.
I couldn't find other errors that, and it seems very stable :good:
My current setup that works is this:
cm-12-20150802-NIGHTLY-find5
gapps-5.0.x-20150404-minimal-edition-signed
Click to expand...
Click to collapse
You are using the wrong GAPPS. Please use the one for 5.1.1. I am using https://www.androidfilehost.com/?fid=24052804347792592
Post your results back. If you still have problems, attach the logcat for the same.
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Does not work the proximity sensor during call, but the sensor good works at tests. How it can be corrected. thanks
I hope "oppo camera" transfer to this roms.
Zerguz said:
Does not work the proximity sensor during call, but the sensor good works at tests. How it can be corrected. thanks
Click to expand...
Click to collapse
I will look into this in more details. Meanwhile, if you can get the logcat log attached, it would help me a lot.
boynareta said:
I hope "oppo camera" transfer to this roms.
Click to expand...
Click to collapse
Do you have the link to this "oppo camera" you are referring to? Is it the default in the latest Color OS?
simon2bb said:
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Click to expand...
Click to collapse
This works good on my mobile. Can you send me the logcat logs for both radio and main buffers?
http://0fa8391b.dl-one2up.com/onetwo/content/2015/10/7/0fa8391bffee21e1110d96a9f2ce77a7.apk - OPPOcamera
http://2d245e84.dl-one2up.com/onetwo/content/2015/10/7/2d245e84f6821eb264f4841be9d552a0.apk - OPPOgallery2
simon2bb said:
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Click to expand...
Click to collapse
Like in the official cm12 - I use it. After u turn off wifi go to mobil network settings, select apn-s, open the actual settings and just simply do a save on it. And viola the Mobil internet starting.
All developments are carried out thanks to donations on Purchase of these or other devices
thank
Please do not copy files to other file shares
the project is under constant development and refinement
Project name [ROM] Moto X L!te FW LPA23.12-15.5.EU.ML
Tagline Faster Lighter Economical
for XT1052/1053/1058 - 2G/3G/LTE
and only GSM XT1049/1050/1056/1060/ - 2G/3G/LTE (for CDMA use menu *#*#4636#*#*)
SYSTEM Firmware LPA23.12-15.5.EU.ML Multilingual
- firmware Deodex - allowing resources using modifiers such GravityBox apply all when firmware odex, it sometimes limited customization or going awry
- Launcher -4*5, no searche bar
- tzdata 2015f
- icudt53l last
- return "the gesture of the Jedi" (after installing the firmware of the old sensor /*** it does not threaten the phone)
- delete more apps FaceLock, MotoServices, Google Drive & Docs, Permissions and etc
- replaced by sound WirelessChargingStarted
- uppdate apps LatinIME, Migrate, Calendar, AudioMonitor, Moto, MotCamera, MotGallery
- Stagefright Fix
- removed a lot of the background services collect and send data on the type of phone DropBox, MotoCare, MotoConntect, Drive, FaceLock ... etc.
- add apps VendorApp ESFileManager, CCleaner
- added Russian, Ukrainian language
for Unloked Device
Install for Custom Recovery
Root not PreInstalled
Download there https://yadi.sk/d/jp8ykQqFindY8/MotoX/5.1.0
for Loked Device
5.1.0 for locked phones ready to be sewn LONG !!! 5.1.0 1.5 GB used by all, no matter what the new system weighs only 900MB ... the old system to be erased
Install for QDLoad9008
Root, BusyBox is PreInstalled
- Root SuperSU v2.46
- BusyBox v1.32.2
DISCLAIMER
Author is not responsible for totally bricked devices, broken arms, legs, plane crashes and your wife's cheating.
All actions taken is your own risk.
Instructions to install
You:
- shouldn't be afraid of Qualcomm HS-USB QDLoader 9008;
- do not change any files, pathes;
- can install drivers manually;
- need to install python-2.7.9 and pyserial-2.7.win32;
- unzipp _Rus_5_1_0_LPA23_12.XX.7_BL_V30.BE.rar to Cython27;
Method is dangerous, however gives results.
you must have firmware SU6-7 receiving is not in the form of an update (OTA) and stitched through the RSD Lite.
00 Flash *******_5.1.0-LPA23.12-XX.7_CFC.xml firmware
01 Unzipp everything to Cython27.
02 Run BLBROKE.bat.
03 After you got Qualcomm HS-USB QDLoader 9008, install drivers manually
04 Run RUN_Rus_Part**.bat. Parts 250 of system.
*** You can also run a file if you are sure that your phone can work 6-7 hours with the screen RUN_Rus_***_Full.bat
then repeat this step X times (the number of times equal to 6)
while (found next part) do
***
>> fastboot to hold 10 minutes that would have been charged a little phone
>> Run BLBROKE.bat.
>> Run RUN_Rus_***_Part**.bat. Parts 250 of system.
***
end
99 Turn device on. Now you have SU DEODEX PreRooted
Drivers, Soft there -> https://yadi.sk/d/p458Cy0XineRC
Scripts, ROM there -> https://yadi.sk/d/kxbxpTnziSg35/Moto X/5.1.0
Please do not copy files to other file shares
the project is under constant development and refinement
XDA:DevDB Information
[ROM] Moto X L!te FW LPA23.12-15.5.EU.ML, ROM for the Moto X
Contributors
CrashXXL
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Android 5.1.0 LPA23.12-15.5
Version Information
Status: Stable
Current Stable Version: 1.00
Stable Release Date: 2015-10-19
Current Beta Version: 0.01
Beta Release Date: 2015-09-28
Created 2015-10-12
Last Updated 2015-10-21
So can I assume this is a stock based rom that has been debloated, optimized, and such but is fully functional as a stock Rom? I've been waiting to update the wife's X on account of all the reported troubles with the official lollipop update.
This firmware is the most clean and fast
It based on the stock, and includes all updates and patches
Hi!
First of all, thank you very much for your rom, the "jedi" gesture is back!
I checked the stagefright detector and it seems to be vulnereble to the "CVE-2015-6602" I asume is a new vulnerability and motorola haven´t patched yet.
I have installed the rom an hour ago and everything works as expected, so nothing else to report, if I find anything strange i will tell you.
Thanks again!
Iktor said:
Hi!
First of all, thank you very much for your rom, the "jedi" gesture is back!
I checked the stagefright detector and it seems to be vulnereble to the "CVE-2015-6602" I asume is a new vulnerability and motorola haven´t patched yet.
I have installed the rom an hour ago and everything works as expected, so nothing else to report, if I find anything strange i will tell you.
Thanks again!
Click to expand...
Click to collapse
stagefright was fixed in last update, so I would certainly expect this ROM to have that patch. also, I believe that this thread should be moved to the Development section, not in general. you may need a mod to help out.
"and only GSM XT1049/1050/1056/1060/ - 2G/3G/LTE (for CDMA use menu *#*#4636#*#*)"
So this could work on the Sprint network with a 1056?
please link to another server
Enviado desde mi Moto X mediante Tapatalk
May I know how often will you update?
What about the very serious glitch-bug on YouTube ? Is it fixed ?
Sent from my XT1052 using Tapatalk
the project will be updated as long as I have moto phone x1
applications such as YouTube, Chrome, and others I can not fix, maybe, I do not have the source code of the product
YES 1056 will work
Xposed?
wildblade64 said:
Xposed?
Click to expand...
Click to collapse
http://forum.xda-developers.com/xposed
CrashXXL said:
the project will be updated as long as I have moto phone x1
applications such as YouTube, Chrome, and others I can not fix, maybe, I do not have the source code of the product
Click to expand...
Click to collapse
Thank you for reply.
jco23 said:
stagefright was fixed in last update, so I would certainly expect this ROM to have that patch. also, I believe that this thread should be moved to the Development section, not in general. you may need a mod to help out.
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x/general/ota-xt1052-firmware-update-5-1-10-10-t3221898
Above thread has screenshots of XT1052 with update and shows that the above vulnerability is not fixed yet. It's the only one thats not fixed.
---------- Post added at 07:05 PM ---------- Previous post was at 07:02 PM ----------
CrashXXL said:
the project will be updated as long as I have moto phone x1
applications such as YouTube, Chrome, and others I can not fix, maybe, I do not have the source code of the product
Click to expand...
Click to collapse
I'm sorry... I dont understand... Do these apps not work right now???
I want to try this ROM to get back to stock... I do not have a system to flash the stock files...
Please help me understand.
XT1049 on C Spire?
Do you think this ROM will work on XT1049 from C Spire? I also would like to use a stock based ROM.
I do not change third-party applications, such as YouTube, Chrome, and other Google search, wait for the update application from the developers (Google)
Sorry, I meant to say if this rom will have xposed built in. Thank you so much crash by the way, I'm assuming this will eventually work for xt1058 with locked bootloaders?
what is that?
the gesture of the Jedi
what is that?
On kitkat you could have your hand in front of the screen and it would display moto display, since the lolipop update, you have to hold your hand directly over the light sensor for a few seconds.
This is a initial Work in Progress CM13 release for Yu yutopia. It is bound to contain certain bugs since it is a initial release and you are warned about it at the start. So read what works and what doesn't below and then proceed to try it on ur device
Release notes :
What works ?
Wifi
Bluetooth
All functionality of RIL
Camera
Audio
Fingerprint ( You can't configure it. Any finger would unlock it )
All other basic functionalities ( Basic apps seem to be working )
Titanium backup works fine
You say more !
Broken stuff :
Music playback via stock player is broken. ( Use apps such as vlc,poweramp,etc )
Can't configure fingerprint
Flashing procedure :
General steps ( Wipe cache/data and wipe dalvik )
Flash ROM zip and then gapps immediately
Reboot and have fun
Downloads :
Mod edit: download link removed.
XDA:DevDB Information
CyanogenMod 13 for Yu Yutopia, ROM for all devices (see above for details)
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_cyanogen_msm8994
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Alpha
Current Beta Version: 1.0
Beta Release Date: 2016-01-14
Created 2016-01-20
Last Updated 2016-01-20
Reserved
FAQ and other stuff
Awesome stuff!
sarang.sss29 said:
Any custom recoveries like TWRP recovery for YU Yutopia?
Click to expand...
Click to collapse
Yes it's available and you will have to flash with it. But it's available over in yu forums
Ibwas so happy to see this rom available because the phone was let down with a none responsive screen and cyanogenOS
I flashed this 4 times now with Google apps poco amr 64 the phone boots but WiFi doesn't work and Google apps keep crashing and if you use nano sim 2nd slot there's no support for LTE it has to be micro sim main slot
Slorks said:
Ibwas so happy to see this rom available because the phone was let down with a none responsive screen and cyanogenOS
I flashed this 4 times now with Google apps poco amr 64 the phone boots but WiFi doesn't work and Google apps keep crashing and if you use nano sim 2nd slot there's no support for LTE it has to be micro sim main slot
Click to expand...
Click to collapse
The flashing method goes like this...Wipe data/cache and system..Flash rom immediately followed by gapps ( gapps shouldn't be flashed after first boot in M ) and then u should see no google apps crash issues. Wifi works ( if it doesn't , just reboot )
how yutopia works with cyanogenmod? battery drains less?
Issues just after booting
Hey Devs,
i'm new to the forum, so please forgive in case of any wrong comments.
I'm facing issue while using this ROM just after finishing clean install followed by GAPS package.
There is force closure while setting up phone during screen lock. After setting pattern or lock i'm getting message that system stopped working and doesn't go ahead. Please suggest any other method. Currently using RR Rom.
Santhosh M said:
This is a initial Work in Progress CM13 release for Yu yutopia. It is bound to contain certain bugs since it is a initial release and you are warned about it at the start. So read what works and what doesn't below and then proceed to try it on ur device
Release notes :
What works ?
Wifi
Bluetooth
All functionality of RIL
Camera
Audio
Fingerprint ( You can't configure it. Any finger would unlock it )
All other basic functionalities ( Basic apps seem to be working )
Titanium backup works fine
You say more !
Broken stuff :
Music playback via stock player is broken. ( Use apps such as vlc,poweramp,etc )
Can't configure fingerprint
Flashing procedure :
General steps ( Wipe cache/data and wipe dalvik )
Flash ROM zip and then gapps immediately
Reboot and have fun
Downloads :
Mod edit: download link removed.
XDA:DevDB Information
CyanogenMod 13 for Yu Yutopia, ROM for all devices (see above for details)
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_cyanogen_msm8994
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Alpha
Current Beta Version: 1.0
Beta Release Date: 2016-01-14
Created 2016-01-20
Last Updated 2016-01-20
Click to expand...
Click to collapse
I m on invicta OS 7.1.2 - my problem is whenever i want to dial a number, it take 1-5 seconds to load. Plz help me to fix this.
Dar Samir said:
I m on invicta OS 7.1.2 - my problem is whenever i want to dial a number, it take 1-5 seconds to load. Plz help me to fix this.
Click to expand...
Click to collapse
Please give more details please
Code:
What is your--
Device model: XT...
Radio (baseband):
ROM version:
Gapps version:
Data Roaming:
Dual SIM:
Did you--
Unlock the bootloader:
wipe:
restore with titanium backup:
reboot after having the issue:
Tested without any additional apps installed:
Are you using--
Substratum themes:
a task killer:
a non-stock kernel:
LOSSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
My device modal is XT1643
I had installed Nova Launcher that was causing problem for me. I fix this issue after uninstalling Nova launcher. Anyway thanks for reply
RevengeOS is back and happy to announce that our new UI implementation is ready to be shipped to all of our users. A quick look at our designed UI is here
RevengeOS is an aftermarket firmware based on AOSP. We are dedicated to a beautiful, fast, stable and minimal customized ROM, honesty and communication with our users, and openness with our code, Hope you will enjoy.
Please feel free to look, build, and use our code at RevengeOS GitHub.
Also, we got our Telegram Group to talk about the ROM, share some love, ideas or even have fun with us
Disclaimer: While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in Telegram Group
Download ROM here for your device! [Newer link on third post of this thread!!!!!!!]
Vince
What's Working
- Wi-Fi
- RIL
- VoLTE
- Mobile data
- GPS
- Camera
- Flashlight
- Camcorder
- Bluetooth
- Fingerprint
- Sound / vibration
BUGS:
- You Tell me
Download the ROM
- Backup each and every partition from TWRP Recovery(optional)
- Make a full wipe (system, vendor, data, cache, dalvik)
- Flash RevengeOS Package
- Flash gapps
- Wipe cache! -And at last Reboot!
[First boot will take few minutes! Have patience]
Clean Flash is always recommended!
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
->How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
Like my Work?
Buy me a Beer or Coffee
Donate
Device Source
- Kernel Tree
- Device Tree
- Vendor Tree
XDA:DevDB Information
RevengeOS, ROM for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
Starlight5234
Source Code: https://github.com/RevengeOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Global Firmware
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2020-10-28
Created 2020-10-28
Last Updated 2020-11-19
Important announcement for developers, please click here https://telegra.ph/We-need-developers-11-19
[ Latest ]
RevengeOS Version: 4.0
Build date: Thu May 13 14:26:06 UTC 2021
Device changelog:
- Cleanup deprecated stuff
- Switch to Health HAL 2.1
- Add camera libs needed for IMS
- Switch to AOSP Clang 11
Kernel changelogs:
- Starlight kernel r2
- Rebase to Kud-Project
- Upstream to 4.9.267
- Upstream base, prima and techpack to LA.UM.9.6.2.r1-04200-89xx.0
- Misc fixes from Kud-Project
- Fix the "delay" when waking device using fp
- Include and upstream LZ4 compression
- Debloat prima drivers (creds to @mochi_wwww)
Source changelog:
- May security patch
Download link: RevengeOS-4.0-R-OFFICIAL-vince-20210513-1423.zip
MD5: (ccfd20c36e7c0cbfa5882b6f9e755a5f)
Donate: https://paypal.me/lucchetto
[ Older ]
RevengeOS Version: 4.0
Build date: Fri Apr 16 18:29:48 UTC 2021
Device changelog:
- Update Audio, BT, Radio and almost all other blobs from LA.UM.9.6.2.r1-03600-89xx.0
- Fix FM Crash
- Import DSP, Latency and Voice blobs
- Switch to taimen fp
- Fix green artifacts
- Restore QCOM deep buffer
- Fix USSD codes not working on some operators
Source changelog:
- April security patches
- Network per-app isolation
vince
Download link: RevengeOS-4.0-R-OFFICIAL-vince-20210416-1624.zip
MD5: (3ad782caebfec04ba282dac20e60778e)
Donate: https://paypal.me/lucchetto
[ Older ]
RevengeOS Version: 4.0
Build date: Thursday 05/03/2021 12:39 UTC
Changelog:
- March Security Patch
- Fixed DT2W not turning off & IR
- Address tons of denials
- Switch to AIDL PowerHAL
- Switch to goodix fp HAL from Daisy
- Full VNDK support ( Thanks to @SebaUbuntu)
- Add some missing camera blobs from Hydrogen
NOTE :
- Clean flash recommended
- SeLinux is Enforcing
- CTS passes as usual
Download link: RevengeOS-4.0-R-OFFICIAL-vince-20210305-1239.zip
Donate: https://paypal.me/lucchetto
------------------------------------------------------------------------------------------
New RevengeOS update available!
RevengeOS Version: 4.0
Build date: Wed Feb 17 18:52 UTC 2021
Device changelog:
- Disable mobile data on first boot
- Add & tune zram (50% of RAM)
- Attempt to fix fp usage in other apps
- Update to February redfin fp
- CTS passes by default
- "Mostly" fix chrome crash
Source changelog:
- February security patch
- Recents UI improvements
- Network traffic indicator
- Gesture pill width customisation
- Burn in protection
- Include Etar (Calendar app) and Simple Gallery Pro
- Include Simple Weather app
- Added Advanced reboot
Download link: RevengeOS-4.0-R-OFFICIAL-vince-20210217-1852.zip
Donate: https://paypal.me/lucchetto
Thanks man, can't wait to try this!
I am using this version now, I really liked the alpha versions more. they were more stable and the UI didn't look weird.
I am getting some weird navigation issues like the buttons not appearing again on fullscreen apps if I swipe from the edges. Also, I cannot disable gradients even tho there is an option for that in the Style app.
Downloading
Download link don't work?
Hey man, just wanted to ask, could you possibly work on HavocOS 4.0 for Vince?
The last dev(awesome guy btw) left that AMAZING rom.... Would love to see it being brought back to life.
JustAnAverageGuy_19 said:
Hey man, just wanted to ask, could you possibly work on HavocOS 4.0 for Vince?
The last dev(awesome guy btw) left that AMAZING rom.... Would love to see it being brought back to life.
Click to expand...
Click to collapse
This please. <3
JustAnAverageGuy_19 said:
Hey man, just wanted to ask, could you possibly work on HavocOS 4.0 for Vince?
The last dev(awesome guy btw) left that AMAZING rom.... Would love to see it being brought back to life.
Click to expand...
Click to collapse
There is already a new maintainer for havoc for Vince. Please be patient as havoc 4.0 isn't out for any device and the new maintainer would do everything they can to get a stable and beautiful build to you as soon as possible
Hi, I'm using your rom but I'm having some issues. First I couldn't manage to install the NikGapps because even if the installation was successfull they didn't appear on my phone. I just managed to get play services and play store, so I installed everything from there, but the problem is that every browser I try to install other than the one you provided instantly (for example chrome and edge) freezes and becomes unusable. Other than that, I tried to disable the keyboard vibration but it still vibrates when I write something. Other than that it's a great rom so keep going
Broskinator said:
Hi, I'm using your rom but I'm having some issues. First I couldn't manage to install the NikGapps because even if the installation was successfull they didn't appear on my phone. I just managed to get play services and play store, so I installed everything from there, but the problem is that every browser I try to install other than the one you provided instantly (for example chrome and edge) freezes and becomes unusable. Other than that, I tried to disable the keyboard vibration but it still vibrates when I write something. Other than that it's a great rom so keep going
Click to expand...
Click to collapse
the chrome browser crash bug already fixed on lastest build. what nikgapps u use? if you dont want keyboard vibration, u can disable the touch vibration at settings.
EriecTan said:
the chrome browser crash bug already fixed on lastest build. what nikgapps u use? if you dont want keyboard vibration, u can disable the touch vibration at settings.
Click to expand...
Click to collapse
When will the latest build be released? And how do the updates work? Do we have to flash it again from the recovery? I solved my issue with NikGapps, I just had a corrupted version due to problems during the download. The touch vibration is disabled in my options but the keyboard is the only thing that keeps vibrating
Broskinator said:
When will the latest build be released? And how do the updates work? Do we have to flash it again from the recovery? I solved my issue with NikGapps, I just had a corrupted version due to problems during the download. The touch vibration is disabled in my options but the keyboard is the only thing that keeps vibrating
Click to expand...
Click to collapse
lastest build on the 1st post date 28 - 10 - 2020. Yes, update flash thru recovery. Go to settings > accessibility > vibration & haptic strength > touch feedback off.
this will make any touch vibration off too
EriecTan said:
lastest build on the 1st post date 28 - 10 - 2020. Yes, update flash thru recovery. Go to settings > accessibility > vibration & haptic strength > touch feedback off.
this will make any touch vibration off too
Click to expand...
Click to collapse
I was obviously talking about the next release, because the one I have is already the one in the first post, and the chrome freeze is in it
Broskinator said:
I was obviously talking about the next release, because the one I have is already the one in the first post, and the chrome freeze is in it
Click to expand...
Click to collapse
I have heard people saying about it but for some reason Chrome decides to not crash on my phone no matter what I do. I tried many times reproducing the error but it "seems" it's because of SeLinux enforcing, try flashing permissiver
Starlight5234 said:
I have heard people saying about it but for some reason Chrome decides to not crash on my phone no matter what I do. I tried many times reproducing the error but it "seems" it's because of SeLinux enforcing, try flashing permissiver
Click to expand...
Click to collapse
It doesn't crash, but it freezes becoming unusable. Other thing, today I noticed that my GPS doesn't work too, with every app.
What do you mean by "try flashing permissiver"?
Broskinator said:
It doesn't crash, but it freezes becoming unusable. Other thing, today I noticed that my GPS doesn't work too, with every app.
What do you mean by "try flashing permissiver"?
Click to expand...
Click to collapse
Permissiver v5 by Erfanoabdi, anyways will look after GPS issues
Starlight5234 said:
Permissiver v5 by Erfanoabdi, anyways will look after GPS issues
Click to expand...
Click to collapse
So should I flash it from the scratch as if I was doing the first flashing?
Broskinator said:
So should I flash it from the scratch as if I was doing the first flashing?
Click to expand...
Click to collapse
you don't have to clean flash again, install it as usual will do just fine