Related
Do you prefer an air mouse like the rc 12
http://www.aliexpress.com/item/Free...yboard-RC12-for-Google-Android/672927797.html
or a logitech keyboard like the k400
http://www.amazon.com/Logitech-Wire...1?ie=UTF8&qid=1359197540&sr=8-1&keywords=k400 ?
any feedback with minix neo x5 or other android stick/mini pc ?
thanks
I'll answer since I have an RC11, and I just recommended a Logitech K400 for a relative who has a MK802.
I also have a PS/2 keyboard/trackpad that I use with my MythTV system. It is very similar to the K400, but slightly larger.
I personally prefer the smaller device. It's not technical, it's purely logistical or ergonomics.
Finding a place to set the larger device down is inconvenient in a home-theatre setting. There's no place for it on the easy chair, and if you set it on the couch, then cat, dog, significant other, kid, relative, etc. are invariably going to sit/step on it, sending unintentional keystrokes at the least, breaking it in half at the worst (depending on weight of dog/cat/significant other, etc., OK... probably not cat, unless you have a very impressive cat.)
In a dimmed home theatre/living room, or if you're eyesight is not great, the larger key markings can be an advantage, and of course it is much easier to type on a larger device, but it is outweighed by constantly having it on your lap, or having to find some place to set it. My RC11 sits perfectly fine on the arm rest, and is not in the way when I want to get up/sit down.
The advantage of the RC11/12 is when you are *not* using it, which unless you make long-winded replies to posts on xda-developers (gee... who would do that?!) is most of the time.
The accelerometer in the RC11 can be a bit awkard/frustrating to use a times, especially when you are not used to it. Especially scrolling is easier on a track pad (such as RC12 or K400, or PS/2 keyboard).
Since I have not seen it mentioned here, I would also like to mention the RC13. Very cool since it also functions as an VoIP handset. It is a USB audio device, (not bluetooth), so it should work with sticks that support a USB audio device.
The RC13 uses internal rechargeable batteries instead of disposable batteries. IMHO, this is a disadvantage since if you find your batteries are low/dead, you either have to use it while plugged in (with a long USB cable), or just not use the whole system until the keyboard is charged.
If you have a device with disposable batteries, they can be changed in seconds.
...by 'proper', I mean 'standalone'!
Basically the same as my old Vapirius AX (similar to Rock/Z1) that I've used daily for 2 years, but much cheaper and runs Android 4.1 and it has 320x240 2'' screen and not the square 240x240 1.5'' style of most watches which I can't get on with.
I'm going to order it and check it out. .
Nothing to lose at that price!
http://www.hongkongeek.com/en/smartwatches/5337-20-inches-watch-an1-with-android-41.html
Wearable Smart Phone Watch AN1 2.0" Touch Screen Android 4.1.1 w/ Camera / Wi-Fi - White + Silver - Free Shipping - DealExtreme
Looks like the Neptune Pine...
The AN1 Reviewed (I Think Comprehensively)
Here's what you need to know about the watch, which I've used for several days. It's more a sweet novelty than a gadget of genuine use. But it works. It's basically a mini-tablet phone (or phablet) and functions via the exact same Android protocols, except the master controls are hard, physical buttons built into the left and right sides, rather than soft touch-buttons on or below the screen. And of course the interface is configured to adapt to the tiny size. Yet at two-inches, that screen is a bit big for comfort if you like wearing the watch face on the inside of your wrist (which I do). So I sometimes rotate it to switch position.
Touch sensitivity seems excellent, as well as touch accuracy, which is hugely important given the minuscule QWERTY keyboard that pops up when you need to enter text. Unlocking the startup screen is frustrating at first until you figure out that you have to swipe the icon up or down, not to the side, as on bigger screens. There's no icon or hard control to access the active-apps screen (from which you can toggle back and forth between active apps and turn running apps off); as on certain larger phablets, you get to it by long-pressing the home screen button.
Because the AN1 is small, its WiFi receptivity is modest (the signal is strongest the closer you are to the source). So's volume but it's not bad for the size. You won't hear much through the earphones except in relatively quiet places, unless you have a separate sound booster; but in quiet places it isn't bad. However, it's impossible to attach the earphones one-handed; at least it is for me: You have to hold open the protective soft plastic flap that covers the mini-USB port (which is where they attach), which means you can't wear it while setting that up. That said, the AN1 will also transmit to Bluetooth headsets. And video/audio playback is very smooth. Even impressive, all things considered. Not a gamester, so no idea how gameplay would go. But with a two-inch screen, why would you want to?
Believe it or not, eBook reading is also a very decent experience in either the page or landscape aspect, though for simple eye-to-text positioning, page view works best if you take the watch off and operate it two-handed. In landscape view, though, you can make like **** Tracy. The only reading app I've tried so far is Amazon Kindle, but every feature seems to work per normal. Whatever normal is at that size.
No problem with the phone detecting a SIM card or storage-expansion microSD card (I added the 32G max, which costs all of $10 on eBay). But the cards are tricky to insert, because the lock flaps that secure them in place are so flimsy. However, once they're in, they're in. And insertion of the expansion card is critical, since the Internal Storage provided is write-protected; you won't be able to download (via internet) or sideload (via computer) files or apps without providing extra storage.
The battery is built into the back cover. Comes the time when it no longer holds a charge, one would need a replacement cover. I assume those are available or will be made so eventually.
There's no Playstore app included; plus it's futile to sideload-and-install Playstore from another source, since the app quits as soon as it boots. There is instead the HiMarket app, whose store features mostly Chinese text; but if you know the apps you want/need, you can still enter a search in English and find them -- most of the time. Sideloading and installing other apps also seems to work -- most of the time.
And oh, yeah -- in the "Good safety tip, Egon" department -- don't wear the AN1 (or any other Android watch of similar concept) in inclement weather. With an exposed speaker grille and exposed miniUSB access port (the protective flap doesn't fit snugly), not to mention hard buttons that aren't part of the case proper, bringing this out into very moist air or, worse, active precipitation, would be like putting your iPad in a filling toilet tank to see how high the water has to go before it fries.
Not encountering anything much in the way of buggyness yet. All in all, the AN1 does precisely what it claims to do. And for the conversation-pieceness of it, and frankly, the satisfaction of my curiosity, I'm happy to be an owner. It won't collect dust. But it's not for the customer looking for significant enhancement of his electronic life beyond what he already has.
Thanks for the review.
Also been using the AN1 for a couple of weeks and fairly impressed, but then I've been wearing a similar one for a couple of years and have only that and a conventional phone to compare it with.
Confused what you say about the battery; my AN1 has a battery on the back that can be detached and changed by pressing a small recessed lug/clip. The battery is the same as the old Z1/Rock/Vapirius so is readily available. Are you sure your battery is non-removable?
Also, as it's rooted - although Superuser is not installed - all current Play Store and Google services, sync adapters etc can be side loaded into system/apps, changing permissions the usual way. I am running all the latest Google App stuff now, but you're right about the Chinese Market and I removed it immediately along with anything Baidu related.
My only mild criticism of the watch (I can live with the floppy USB port cover as most mobile phones have no cover whatsoever) is the screen, not the digitizer which as you point out is responsive and works well, but the outside screen. It's scratched badly already and cleaning it makes it even worse. It's almost like a bad plastic. My other smartwatch has been used every day for two years and the screen still looks brand new without protection.
Lesson is get a good screen protector BEFORE even touching it! Although is fairness, the scratches don't really show when the screen is powered.
The sound can be tweaked in the engineering settings (I've forgotten the number/symbol sequence to access those settings right now) and I have managed to get it sufficiently loud to annoy other people listening to a phone conversation.
https://www.youtube.com/watch?v=MxzycSNQsz4
https://www.youtube.com/watch?v=3yjVVHpP1AM
Cheers!
marcusroberts said:
Thanks for the review.
Also been using the AN1 for a couple of weeks and fairly impressed, but then I've been wearing a similar one for a couple of years and have only that and a conventional phone to compare it with.
Confused what you say about the battery; my AN1 has a battery on the back that can be detached and changed by pressing a small recessed lug/clip. The battery is the same as the old Z1/Rock/Vapirius so is readily available. Are you sure your battery is non-removable?
Also, as it's rooted - although Superuser is not installed - all current Play Store and Google services, sync adapters etc can be side loaded into system/apps, changing permissions the usual way. I am running all the latest Google App stuff now, but you're right about the Chinese Market and I removed it immediately along with anything Baidu related.
My only mild criticism of the watch (I can live with the floppy USB port cover as most mobile phones have no cover whatsoever) is the screen, not the digitizer which as you point out is responsive and works well, but the outside screen. It's scratched badly already and cleaning it makes it even worse. It's almost like a bad plastic. My other smartwatch has been used every day for two years and the screen still looks brand new without protection.
Lesson is get a good screen protector BEFORE even touching it! Although is fairness, the scratches don't really show when the screen is powered.
The sound can be tweaked in the engineering settings (I've forgotten the number/symbol sequence to access those settings right now) and I have managed to get it sufficiently loud to annoy other people listening to a phone conversation.
https://www.youtube.com/watch?v=MxzycSNQsz4
https://www.youtube.com/watch?v=3yjVVHpP1AM
Cheers!
Click to expand...
Click to collapse
all good and great but remember its running android 2.x!
cylent said:
all good and great but remember its running android 2.x!
Click to expand...
Click to collapse
No. The AN1 is running 4.1.1. The older Vapirius watch I mentioned is running 2.1.
with the z1 smartwatch / Vapirius they stopped with the clean rom I would like to see a custom rom for this :fingers-crossed:
I found this clone of Galaxy Gear and it's even cheaper at $85.99 !?
http://vifocal.com/mobile-phones/ot...-2-os-dual-core-wifi-fm-1-54-inch-screen.html
And a review for it:
http://www.quadcoremobiles.com/2014...ewgalaxy-gear-clone-dual-core-android-4-2-os/
Wasn't the Galaxy Gear a fail.
Specs'
acb123 said:
I found this clone of Galaxy Gear and it's even cheaper at $85.99 !?
http://vifocal.com/mobile-phones/ot...-2-os-dual-core-wifi-fm-1-54-inch-screen.html
And a review for it:
http://www.quadcoremobiles.com/2014...ewgalaxy-gear-clone-dual-core-android-4-2-os/
Click to expand...
Click to collapse
For $85.99 you get: +$15 delivery to UK
8MP Camera
Android 4.2 OS
Thickness is about 8-9mm
MTK6572 Dual core processor, 512M RAM+4G ROM
350mAh Battery
E-Compass, Direction, acceleration, temperature,pressure, ambient temperature and linear acceleration sensor
Not bad. I wonder if its splash proof?
** More importantly, can you use Play Store? Anyone? **
simple1i said:
For $85.99 you get: +$15 delivery to UK
8MP Camera
Android 4.2 OS
Thickness is about 8-9mm
MTK6572 Dual core processor, 512M RAM+4G ROM
350mAh Battery
E-Compass, Direction, acceleration, temperature,pressure, ambient temperature and linear acceleration sensor
Not bad. I wonder if its splash proof?
** More importantly, can you use Play Store? Anyone? **
Click to expand...
Click to collapse
This isn't a Play Store compatible device. Also, looking at the pictures, the apps are proprietary.
Some Android devices, especially Chinese ones that I've used, Google Services aren't installed and have been done so manually in order to get all the Android features.
This isn't one of them.
I can give the firmware for the AN1 if someone would like to make a custom rom.
marcusroberts said:
This isn't a Play Store compatible device. Also, looking at the pictures, the apps are proprietary.
Some Android devices, especially Chinese ones that I've used, Google Services aren't installed and have been done so manually in order to get all the Android features.
This isn't one of them.
Click to expand...
Click to collapse
Shame hey.
All those sensors are useless if there's no app for it.
sensors
They've caught on to a great idea, but it seems pretty pointless as said before. Hopefully there will be some improvements in the (less expensive) range of android wear.
google apps
with the z1 i used gapps install zip and gapps copy zip.You guys that have the AN1 do you have these for this watch or can you point me to the place to get them.
1bluemax said:
with the z1 i used gapps install zip and gapps copy zip.You guys that have the AN1 do you have these for this watch or can you point me to the place to get them.
Click to expand...
Click to collapse
Details on how to load all the Google stuff onto the AN1 and most other similar Chinese devices are here (reply#7):
http://linuxslate.com/cgi-bin/forum/YaBB.pl?num=1399895851
These are the steps:
Here are my instructions for putting all the correct Google Play stuff and thereby having a full non-Chinese Android. Remember to totally uninstall all the Chinese Market and Baidu.
Download the files from here:
https://www.dropbox.com/sh/56ppcal1t9dwm6g/AACubjVgwQIcFjVv0_wvo05na
1. Use Root Explorer
2. Copy GoogleServicesFramework.apk, GoogleLoginService.apk and Google_Play-v3.8.17.apk to the system/app folder on your phone with Root Explorer.
3. In Root Explorer click Mount R/W. Change the permissions of the 3 files to match the permissions of the other files in the folder rw-r--r-- (6-4-4). Then click Mount R/O and exit Root Explorer.
4. Install GoogleCalendarSyncAdapter and GoogleContactsSyncAdapter the usual app way.
5. Reboot your phone. Hard reset is not necessary.
6. Go to Accounts & Sync in your phone's settings, click Add account and enter your Google/GMail account details.
7. Go to your apps and Launch Google Play.
8. Update any Google stuff from Play Store if prompted.
I'll do a vid of this sometime.
Good luck!
Marcus
Thanks for the info.:good:
AN1 Battery Clarification
Hey, Marcus -
Sorry to take so long to reply.
When I said the AN1 battery was non-removable, I meant that the back of the AN1 watch IS the battery, for all intents and purposes, and is the battery housing, not a mini-case into which a battery could fit. Yes, as you say, it's removable via the lug-clip and that gives you access to the card slots. But I didn't know one could buy a replacement; the lug-clip architecture is so specific to the watch build that I thought an AN1 battery replacement would have to be sold as a locked-to-the-model accessory. (Well, until today; trolling around eBay I saw a Z1 battery/back panel replacement for sale and kind of assumed it would fit the AN1. But it was $39 which struck me as high, so I didn't purchase. I'll do a broader search for Z1 replacements now, though. If you know of where they can be gotten cheaply, chime in.)
No Real Need for Rooting
By the way ...
Even though the AN1 isn't Play Store compatible, I've been able to load everything on it that I need. I either find direct links to download the APKs desired, or APK store links that bring me to the APK. In any event, sideloading from my computer is easy, then I just use File Manager to open the apps. If the apps don't work, I uninstall them. Most of them do. And there are so many choices that you can eventually have it doing everything you desire of it. (Beasr in mind, it's not really practical to install anything too unique or fancy on the watch because of its screen size; it's best for basic utilities that let you play videos, read books, manage calendar data, email, facebook, etc. And it does all that handily. Sometimes not with apps that work on your larger Android devices; but it doesn't take much time at all to find something that'll do the job as well in miniature.)
Has anyone obtained this apparently little-known watch?
I'm not sure it's made by UWatch, even though some places claim it is, and the model name follows their pattern.
But it has some interesting characteristics that blend the U8, U8 Pro and U10 together:
- it can act as a phone, with a SIM, but only through an additional (included) magnetic "SIM shell" that makes the watch a little thicker; without it, it's very thin, less than 9mm
- a detachable shell is also used for USB charging
- it has a compass like the U10, but maybe no barometer/altimeter like the U8 has, since a seller told me so, even though some specs listing suggest otherwise
- the screen is a whopping 320x320 resolution 1.56" IPS (the U8 is 128x128 TN and the U10 is 240x240)
- the battery is quite large, 360mAh, with a claimed life of 10 days (!)
- the CPU is a newer MTK2502C, though I'm not sure it runs Mediatek's Linkit like some other newer watches (there is no hint that you can install apps)
- of course, there are the usual stopwatch, step counter, sleep monitor, and so on
It is around €55, but it can only be obtained from China, I found no European reseller.
If anyone has it (or has found detailed reviews):
- does it run Linkit? Can Linkit apps be installed (through, for instance, the MediaTek SmartDevice app)?
- does it have motion gestures (for instance, does it turn on when you rotate your wrist towards you)?
- is the battery life up to promises?
- is the software solid or buggy?
- any other highlights?
I ordered one of these after I tried and was pleasantly surpised with an u8 clone(...).
There very basic if you compare them with say samsung gear s2 which runs Android and is over 330€ up here. I would rather use the word "robust". With sandby time of nearly 10 days! Thats standby offcours.
The u8 and u11 seem to use the same Nucleus os.
And though the u11 is better in every aspect it still lacks a animated and interactive notification system that Android smartwatches have.
Nonetheless one can do more with Nucleus devices then meets the eye. Its just not an open os where you can just install apps on the fly. Android devices seem to need more power especialy xburst which runs a fair amount higher in clock.
But Nucleus is also more capable then the current roms used on these smart watches.
I have yet to recieve the u11, but from what I have read it will suffice my needs for the moment.
Though I have to be honest that I do not like the U8's battery life at all. It's just ridiculously short when bluetooth is on all the time. The u11 does come with bt4.0 and the battery is bigger but it also has a faster cpu, uses gsm(if activated) and has a bigger(IPS)and higher res screen. Time will tell what the inpact is on battery life. Not much info is on the net right now.
Anyway, its a nice watch with an original design(..) an better build then the u8. Using metal alloy opossed to plastic for the case, better strap, tweaked interface with two themes, nicer clock faces etc.. and I realy like the modular design to keep the watch slim.
Hopefully someone will tweak and customize some U11 roms here at xda
Found this review(in spanish)
Does anyone have the u11 rom ? I corrupted something on mine by installing an app. Now it's stuck on the clock. Touchscreen works... it still connects to my paired phone but I can't navigate the menus.
Can't help you. I still have to recieve it but
what do you mean with you installed an app?
Benwayqb said:
Does anyone have the u11 rom ? I corrupted something on mine by installing an app. Now it's stuck on the clock. Touchscreen works... it still connects to my paired phone but I can't navigate the menus.
Click to expand...
Click to collapse
ebsbow said:
Can't help you. I still have to recieve it but
what do you mean with you installed an app?
Click to expand...
Click to collapse
Long story short, many notifications did not work. Facebook, Messenger, Gmail to name a few.
I tried different apps on my Galaxy S6 and ended up with a totally incompatible app that tried to install something on the watch and corrupted something.
Thats interresting. Maybe add what app so we dont make
the same mistake again.
Did you try to reset the watch?
I mean reset not restart. There should be small hole
( the one thats not the mic) which you can use to reset the
device by puching a needle gently in there. Just make sure
its not the mic!
Mediatek Smartdevice should work.. ?
It's actually Mediatek Smart Device that messed up my watch.
I didn't find a reset button. Disconnected the battery and reconnected it with still the same result. I left the battery disconnected and I'll try gain in a few days.
I dont think removing the battery will reset the device. Flash ram isn't power dependant.
Maybe the manual can tell where or if there is an reset button?
There is no reset button. I did reset the ram via the Flashtool and I still can't access the menus. The clock did revert back to the default one.
I will need somebody to make a backup of his u11 firmware and post it !
Got mine today. Sadly I ordered Black and gotten a Gray color item. :-/ (don't buy at banggood, they will send random color when there stocks are low) Not to happy.
Anyways.
First impression is good. Metal case, in my case, Gray silver..
Battery wasn' t charged so I could not test it right away
but after a small charge it booted, silently, into clock mode.
The screen is nice at 320p. Clockface is analog which I switched
to digital for no specific reasson. Theres two faces of each, all just fine.
Two themes for menu. Menu is nicely organized with features that
matter easy to access. Much better then the U8 if I may compare.
Notification system is also much better. with a preview of the
sms or other notification that arrives. Longer notifs are clear and cripst to
read on the 320p screen. Which pops on when an notif arrives or when you lift your arm in the right direction. Very usable indeed though shaking would be better.
Every app is nicely tweaked. And the added compass works fine.
Very nice watch and very slim. Obviously adding the gsm module will add a few milimeters. Still have to test this though.
If I get around a pc I will upload the rom for those who want it or just incase. But lets see for an update first.
Misses:
A notif has an menu when swiping from the right. When a large email arrives and you want to access the menu(open, delete, block) the watch may freez.
You dont really need the menu that badly but when it locks, just press the side button for approx. 12 sec. and reboot. No biggy but unfortinute. edit; A long press on an item in the list also pop's upp the menu which works fine.
The vibrator is somewhat to loud. It makes more noice then the alarm sound(in low volume). Sadly no way of turning it down. Turn it off at the cinema or you'll get popcorned!
No Calc! This is a smartwatch, right?
Screen could be a little less bright in the dark. Although a amoled would have been great its a nice ips screen. But a lower setting would be nice.
So did you find a way to make a copy of the firmware?
Thanks
No I have not. I dont have an pc availible. I did try
it on my W10 tablet but W10 isnt beeing very likable.
Can you share the program you used, with drivers, then
I will give it an other try. Also did you use the cable that
came in the box to flash the watch?
My table did not recognize the device. Could be the OTG,
the cable or just plain old W10
I used the cable provided. But I had to use an older laptop running Windows XP. Wouldn't work on my W10 laptop.
I am currently in a moving phaze, so I dont think I can help you right now.
All my stuff is tight up.
Maybe a virtual machine with xp on a w10 tablet/pc will work...
If somebody else can jump in here? I see what I can do here. No promises though.
Benwayqb said:
I used the cable provided. But I had to use an older laptop running Windows XP. Wouldn't work on my W10 laptop.
Click to expand...
Click to collapse
have you found an issue ?
Benwayqb said:
Does anyone have the u11 rom ? I corrupted something on mine by installing an app. Now it's stuck on the clock. Touchscreen works... it still connects to my paired phone but I can't navigate the menus.
Click to expand...
Click to collapse
It seems i have a same issue, only clock menu. depending on chosen clock I can access to call and message fonctions.
Best regards
Ok, so i have my Galaxy S5 tmobile that ive been playing with recently. awhile ago i tried to replace the rear facing camera, and the loudspeaker. unfortunatly when removing the screen, the digitizer was damaged. oled was working great. i would just use a bt mouse to navigate. well last night i pulled the phone apart to compare the amoled connection to that of a S7. just to see if i could throw the S5 screen onto my broken S7 to attempt to setup screen mirroring to my tv and be able to use it with a keyboard and mouse for general streaming.
I left the screws out of the midframe assembly of the S5 and it fell off the table after being reasembled. (love when the pets get into my workshop)
anyway, it was just enough to crack the very corner of the OLED and now there is no functionality to the screen.
ive been thinking about trying something that i just havent seen before, and cant find any information on at all.
There has got to be a way to take the ribbon cable from the S5 screen with the connector and splice/solder into some kind of digital video output. also the audio to the loudspeaker adjusted to low-line and connected alongside the digital video to make a single digital A/V output.
Basically i want to have my BT keyboard and mouse and be able to have it outputting video to either a Moniter, tv, wireless adapter of some sort. i would leave the OS pretty much the same minus alot of needless software at that point, and be able to turn essentially any tv with HDMI or digital video in, into an android smart tv..
i have arduino uno kits and Abillion cables of all sorts.
if anyone has any insght to the format of video coming from the OLED connector, or a pinout , any information that would help me get the ball rolling on this. i would be extremely grateful.
"_Gears Always turning, on your voy-age to droid-age_"
Don't like MHL adapters for some reason?
bbsc said:
Don't like MHL adapters for some reason?
Click to expand...
Click to collapse
They are nice and all. But that would mean I would have to spend money on something to make it work... Also mhl adapters take their own power supply at 5.0v, which means it would have to be plugged in somewhere during its use. Which I had planned on just using a couple 8000 mAh lithium batteries wired in parallel to power the phone at 3.7v. Getting me somewhere between 6 to 8 days of heavy usage before a recharge. And would make it much more portable.. Maybe even construct a small enclosure with a fan out of one of my CCTV cameras. Even if I had to convert the video and audio signals using a microprocessor, I wouldn't have to spend a dime doing the entire project if it works the way Im imagining it too. One of my main objectives with this project is to use parts from old equipment that I already have.
This is more about doing something creative and new with old Galaxy phones that have no other practical use.
Yes I could order an android box off amazon for less than 20$ and do what everyone else did to stream...
Yes I could order an mhl cable and set it up that way....
Yes I could put a new display assembly on it and use it for dev....
But if everyone thought like that, android wouldn't have existed in the first place.
Hi All, I'm looking to buy a smartwatch. I was trying already many times to buy and as always stuck in analysis paralysis phase.
Recently purchased for my wife Google Pixel smartwatch and basically was disappointed with a software support when Android phone was saying go and do something on the watch.
Why google could not make this possible to do from Android phone?
So here're my list of smartwatch requirements
- must have an option to make alarms/alerts. I need a way to make it possible so that I can wake myself up in the middle of the night if something happen.
I need to have an ability to make an API call eg via curl or make any other call from a server or raspberry pi so that the smartwatch starts alarming with a certain message.
- must work with any Android(I have Motorolla g82). I wanted to buy Samsung Galaxy Watch 5 Pro, but when I read reviews that for some features certain apps only work on Samsung devices I have decided not to buy it.
- must have GPS so that I can run and track without a phone.
- must have a good sleep traker.
- must to have ability to buy 2nd charger so that I can charge watches at work if needed.
- very nice to have a big realestate in term of screen and resolution. Preference is a square something like Apple smartwatch(please do not suggest Apple) watch with resolution higher that 360x360px.
- Nice to have LTE, but I really would like to have a mixed mode so that when phone is around it should automatically switch to bluetooth to avoid battery quick discharge.
- Very nice to be able to do all configuration from the phone. My eyesight is dropping with my age so the preference is to be able as much as possible from the phone. I did not like Google Pixel Smartwatch experience.
I'm close to a stage so that I need glasses and do not want to make it so that I must to wear glasses right now.
- nice to fit into 1250AUD(850USD) budget, but can go a bit higher if needed.