Database Users

LG G2 D801 Bricked it's self !!!

Hi
My device is LG G2 T-Mobile D801 Kitkat 4.4.2 v20g
I was playing a online game and my device screen turned off. I tried to turn the device on but no response
after 5 hours I pushed the power button and saw LG logo and the phone hanged.
So I decided to browse xda and other websites to collect some solutions to fix my problem
and now
My device is in Qualcomm HS-USB QDLoader 9008 Mode and Board Diag 2.99a by willcracker shows AP Chip pass and EMMC fail
some times I can take my device to USB Bulk 9006 but this mode remain just for a few seconds.
is there any hope that I can fix my device without replacing main board or EMMC?

lg g2 bricked
PCjoy said:
Hi
My device is LG G2 T-Mobile D801 Kitkat 4.4.2 v20g
I was playing a online game and my device screen turned off. I tried to turn the device on but no response
after 5 hours I pushed the power button and saw LG logo and the phone hanged.
So I decided to browse xda and other websites to collect some solutions to fix my problem
and now
My device is in Qualcomm HS-USB QDLoader 9008 Mode and Board Diag 2.99a by willcracker shows AP Chip pass and EMMC fail
some times I can take my device to USB Bulk 9006 but this mode remain just for a few seconds.
is there any hope that I can fix my device without replacing main board or EMMC?
Click to expand...
Click to collapse
its a hardware issue u need to replace motherbboard

S7 SM-G935P (Sprint) Hardbricked "Qualcomm HS-USB QDLoader 9008"

http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
The site listed above is all the information I currently have on my problem. I know enough to understand a bit of what's going on but I'm no coder or hacker. I've dabled (meaning rooting S3 Straight Talk, Nexus 7, and S7 Edge).
So my phone is black screen, cannot boot/won't boot. It's an S7 Edge so I'm not pulling the battery out since it won't be water-proof then.
+ I cannot boot into bootloader
+ I cannot boot into recovery
+ Nothing lights up, the LED indicator, the screen, buttons, all unresponsive.
+ ADB won't recognize my phone currently so I can't use that
+ Odin won't recognize the phone so I can't use that
My S7 Edge *plugged into my pc* comes up as "RELINK HS-USB QDLoader 9008 (COM 7)" under 'Ports (COM & LPT)' in DEVMGMT.MSC (Device Manager).
I installed the drivers for Qualcomm following the tutorial from the site above. My phone is now recognized as "Qualcomm HS-USB QDLoader 9008 (COM 7)". I cannot find a BACKUP.IMG of my device since I don't know if that's what I'm supposed to be looking for ("BACKUP.IMG") or if it's just a "compiled" version of the five Odin-flashable images I downloaded.
So, copied from their website;
"Guide, if you are NEW “Qualcomm HS-USB QDLoader 9008” MODE
If you are that lucky person, (I'm not) who is stuck in the NEW “Qualcomm HS-USB QDLoader 9008” mode, to be honest, the steps to be taken are a lot easier. However, you need somebody having the same phone as yours to upload your device’s complete eMMC image for you."
So I guess what I'm posting this for is to find out
1.) if anyone else is having similar issues
2.) if there have been any successful attempts at using this method to recover from hard brick
3.) if someone could go waaaaay out of their way to give me their eMMC file
^ I don't think it has to be a Sprint phone, I just need it to boot into bootloader (I THINK)
I'll update with my progress below!

So I contacted JTag repairs and my response is as follows:
"Hello ------ and thank you for contacting me.
No problem for the questions ...but unfortunately I have a short answer :
The S7 Edge uses UFS Memory instead of Emmc memory, there are no JTAG tools that can communicate this UFS memory...this means it cannot be unbricked with JTAG or similar tools."
So here's the information for anyone else. You'll need a program that can communicate to a hard bricked S7 Edge and you'll need a UFS image backup of a functioning device.
Special thanks to @godpowerrr for trying to help me out with it.
Notes: don't hard brick your S7 yet! Lol.

Have you found any solution? I'm also stuck in the same situation with G935A S7 Edge (AT&T variant)

LG Leon LTE Hard Bricked

My Lg Leon can no longer turn on or get to download mode. I was using the LG Flash tools to flash a kdz file and then when it was completed it would not turn on. Doing some further research, I am seeing that the device may be Hard bricked but the device does pick up when I connect it by usb but what comes up is Qualcomm HS-USB QDLoader 9008. I need all the help I can get to get the device up and running without having to bring it back to the manufacturer because I could just purchase another phone.
Any takers??????

Bricked S8 Help? (Sm-g950u1)

Just assuming my phone got an update last night and decided to brick itself. From my side, restarts won't work but I got a USB to recognize Qualcomm HS-USB QDLoader 9008 (COM5). I've tried the software (here) but it doesn't seem to run on the phone, what would be my next step?
Thanks!

Need Help! Hard Bricked phone: Qualcomm HS-USB QDLoader 9008

Hello,
Just hard-bricked my used PH-1 phone trying to flash a version of PIE from Essential's web site.
I used the USB cable that came with the phone, and am now reading that this can brick the phone.
It is completely unresponsive and won't turn on. My PC recognizes it as Qualcomm HS-USB QDLoader 9008
I've seen some older posts related to this issue, but none where it was fixed. Does anyone know of a way to fix the phone?
Thanks!

lesterf said:
Hello,
Just hard-bricked my used PH-1 phone trying to flash a version of PIE from Essential's web site.
I used the USB cable that came with the phone, and am now reading that this can brick the phone.
It is completely unresponsive and won't turn on. My PC recognizes it as Qualcomm HS-USB QDLoader 9008
I've seen some older posts related to this issue, but none where it was fixed. Does anyone know of a way to fix the phone?
Thanks!
Click to expand...
Click to collapse
Nope...
The only successful unbricking was a motherboard transplant... Which requires another device... And some serious know how

any help ? i have same issue

rakan10000 said:
any help ? i have same issue
Click to expand...
Click to collapse
The last post from rignfool sums it up...