Had to flash back to SuperSU v2.79.
Anyone else facing the issue??
DUDE!!!, wrong section
did you even check supersu threads before posting in here ?, check out this
AL_IRAQI said:
DUDE!!!, wrong section
did you even check supersu threads before posting in here ?, check out this
Click to expand...
Click to collapse
1. Both 2.8 and 2.81 won't work on our device, mostly 2.81
2. I had it semi working on 2.8 but when I have updated to 2.81 I've lost root and couldn't re-install it
3. you can either revert back to 2.79 SR3 which work just fine or try Magisk v 12.0
4. I moved to magisk and so far so good, at least until chainfire will get his bugs rooted
SuperSu 2.81 running just fine on my device
Sent from my Nexus 6P using XDA-Developers Legacy app
akashkyh said:
Had to flash back to SuperSU v2.79.
Anyone else facing the issue??
Click to expand...
Click to collapse
Same thing happened to me. Flashed 2.79 SR3 to get root back. 2.82 has been released but I haven't tried it.
Edit: Updated to 2.82 and it works fine on all my devices - Nexus 6P, Nexus 2013, GS4 & Acer A500 tab.
newkydawg said:
Same thing happened to me. Flashed 2.79 SR3 to get root back. 2.82 has been released but I haven't tried it.
Click to expand...
Click to collapse
Installed 2.82 today morning.. think seems fine now.. no unroot problem.
wizardwiz said:
1. Both 2.8 and 2.81 won't work on our device, mostly 2.81
2. I had it semi working on 2.8 but when I have updated to 2.81 I've lost root and couldn't re-install it
3. you can either revert back to 2.79 SR3 which work just fine or try Magisk v 12.0
4. I moved to magisk and so far so good, at least until chainfire will get his bugs rooted
Click to expand...
Click to collapse
Could you write a short tutorial about magisk installation. Tried 3 times to install it, but nothing happened "no root".
N2G47O
IOne_Rus said:
Could you write a short tutorial about magisk installation. Tried 3 times to install it, but nothing happened "no root".
N2G47O
Click to expand...
Click to collapse
Actually a tutorial would be very short one.
* I have downloaded the zip installation file version 12.0
* copy it to your sdcard in your phone
* boot into custom recovery mode
* flash the zip file via the recovery
That's it.
It's the same as flashing chainfire supersu zip file.
wizardwiz said:
Actually a tutorial would be very short one.
* I have downloaded the zip installation file version 12.0
* copy it to your sdcard in your phone
* boot into custom recovery mode
* flash the zip file via the recovery
That's it.
It's the same as flashing chainfire supersu zip file.
Click to expand...
Click to collapse
Did the same but no results.
Will try again.
Thanks
IOne_Rus said:
Did the same but no results.
Will try again.
Thanks
Click to expand...
Click to collapse
That's the only thing i've done.
You can also download the magisk utility from the play and use it to root your device.
https://play.google.com/store/apps/details?id=com.topjohnwu.magisk
IOne_Rus said:
Did the same but no results.
Will try again.
Thanks
Click to expand...
Click to collapse
Extract the boot.img from your ROM and flash before magisk zip. It always clears up any issues I'm having. If your using custom kernel will need to flash again.
I have the same problème so I just flashed magisk but seems like I can't change the permissions
blop135 said:
I have the same problème so I just flashed magisk but seems like I can't change the permissions
Click to expand...
Click to collapse
As suggested before, flash your boot.img and the re-apply the root of your choice.
Related
I have been using TWRP+SuperSU on my HTC 10 (sprint). However, I am not happy not being able to use Android Pay due to root. I searched and found a MAGISK root can do the trick.. I searched and was surprise to find not much of info on this variant.
I only found this: [ROOT] Magisk AutoRoot: Magisk + phh's SuperUser for Nougat (No TWRP required). But that's for the Unlocked version:
Prebuilt Boot Images:
US Unlocked: US_Unlocked_2.28.617.8_boot.zip
I assume I cannot use above boot image for Sprint variant. My question is, where to get this prebuilt boot image for Sprint?
I am on Android 7.0 (2.42.651.6).
Thanks!!
ctzw said:
I have been using TWRP+SuperSU on my HTC 10 (sprint). However, I am not happy not being able to use Android Pay due to root. I searched and found a MAGISK root can do the trick.. I searched and was surprise to find not much of info on this variant.
I only found this: [ROOT] Magisk AutoRoot: Magisk + phh's SuperUser for Nougat (No TWRP required). But that's for the Unlocked version:
Prebuilt Boot Images:
US Unlocked: US_Unlocked_2.28.617.8_boot.zip
I assume I cannot use above boot image for Sprint variant. My question is, where to get this prebuilt boot image for Sprint?
I am on Android 7.0 (2.42.651.6).
Thanks!!
Click to expand...
Click to collapse
That's old info for Magisk, the main Magisk thread has all the up to date files...
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Sent from my Sprint HTC Bolt using XDA Labs
OMJ said:
That's old info for Magisk, the main Magisk thread has all the up to date files...
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Sent from my Sprint HTC Bolt using XDA Labs
Click to expand...
Click to collapse
Thank you. I am following the guide you provided..
"If you're not rooted, or something went wrong and you need a clean start
(Recommended) Restore your boot image back to stock
Download the latest Magisk zip file
If you choose to use SuperSU (only support Android 6.0+), first flash SuperSU in systemless mode
Flash Magisk zip
Reboot, and update the stub Magisk Manager to the latest from Play Store
"
Can you please let me know how to Flash Magik zip? I am on Stock Android 7.0 by RUU. Custom Recovery (TWRP) is gone... Downloading to download mode does not have an option to install zip.... Install Magisk Manger gives me this.. Still requires boot image? Thanks.
ctzw said:
Thank you. I am following the guide you provided..
"If you're not rooted, or something went wrong and you need a clean start
(Recommended) Restore your boot image back to stock
Download the latest Magisk zip file
If you choose to use SuperSU (only support Android 6.0+), first flash SuperSU in systemless mode
Flash Magisk zip
Reboot, and update the stub Magisk Manager to the latest from Play Store
"
Can you please let me know how to Flash Magik zip? I am on Stock Android 7.0 by RUU. Custom Recovery (TWRP) is gone... Downloading to download mode does not have an option to install zip.... Install Magisk Manger gives me this.. Still requires boot image? Thanks.
Click to expand...
Click to collapse
You flash Magisk v11.1 zip via TWRP.
JediMindTrixx said:
You flash Magisk v11.1 zip via TWRP.
Click to expand...
Click to collapse
He just said he doesn't have TWRP.
ctzw said:
Thank you. I am following the guide you provided..
"If you're not rooted, or something went wrong and you need a clean start
(Recommended) Restore your boot image back to stock
Download the latest Magisk zip file
If you choose to use SuperSU (only support Android 6.0+), first flash SuperSU in systemless mode
Flash Magisk zip
Reboot, and update the stub Magisk Manager to the latest from Play Store
"
Can you please let me know how to Flash Magik zip? I am on Stock Android 7.0 by RUU. Custom Recovery (TWRP) is gone... Downloading to download mode does not have an option to install zip.... Install Magisk Manger gives me this.. Still requires boot image? Thanks.
Click to expand...
Click to collapse
Try my post from the Bad Boyz ROM thread. I'm pretty sure that covers it all. If you're already RUU'd you can skip that part, but you will need to unlock your bootloader if you haven't already. I think that factory resets the phone. There's another thread on how to do that via HTCDev that should be stickied, but the process is easy.
https://forum.xda-developers.com/showpost.php?p=71341441&postcount=593
Edit: I see you're already in the process on the other thread. Good luck!
MagisK v11.6 update looped my phone at white screen when taking update from app prompt...
kaw900r said:
MagisK v11.6 update looped my phone at white screen when taking update from app prompt...
Click to expand...
Click to collapse
Worked fine for me.
Update boxes
SilverZero said:
Worked fine for me.
Click to expand...
Click to collapse
There were 2 boxes that could be checked did you check either of them? I checked both and was going to try without checking them but also figured they would update the rom soon and it would be in there. t/u
Hello I'm on 6.0.1 Bad Boyz and I flash this but it doesnt root my phone, I used un-su.zip beforehand
Edit nevermind I RUU'd to Android 7.0 and flashed Bad Boyz Magisk!!!
So as we all know magisk does not root nonrooted or supersu rooted devices (atleast not my devices) so here is simple method to gain MagiskSU Root access and possibly hide your root.
Note: i will use phh's superuser which was used in magisk before.
COMPATIBILITY:
ANDROID 7.x -- Not confirmed
ANDROID 6.0.1 -- Confirmedly working!
1) DOWNLOAD PHH'S SUPERUSER https://superuser.phh.me/
2) BOOT INTO RECOVERY AND FLASH DOWNLOADED ROOT ZIP AND MAGISK IF NOT FLASHED ALREADY
3) REBOOT AND ENJOY
IMAGES:
MagiskSU works just fine without flashing anything else for me
Opticuhl said:
MagiskSU works just fine without flashing anything else for me
Click to expand...
Click to collapse
Glad to hear it! For me it never did
Wizardlysense said:
So as we all know magisk does not root nonrooted or supersu rooted devices (atleast not my devices) so here is simple method to gain MagiskSU Root access and possibly hide your root.
Note: i will use phh's superuser which was used in magisk before.
COMPATIBILITY:
ANDROID 7.x -- Not confirmed
ANDROID 6.0.1 -- Confirmedly working!
1) DOWNLOAD PHH'S SUPERUSER https://superuser.phh.me/
2) BOOT INTO RECOVERY AND FLASH DOWNLOADED ROOT ZIP AND MAGISK IF NOT FLASHED ALREADY
3) REBOOT AND ENJOY
IMAGES:
Click to expand...
Click to collapse
Trying to get this working on my HTC 10 so flash the phh then v12. 0 which is now available? Does anything else need to be done??
I've downgraded to mm so I can get half life 2 to work.
Nice having xposed again.
Sent from my KFGIWI using XDA-Developers Legacy app
dladz said:
Trying to get this working on my HTC 10 so flash the phh then v12. 0 which is now available? Does anything else need to be done??
I've downgraded to mm so I can get half life 2 to work.
Nice having xposed again.
Click to expand...
Click to collapse
Flash magisk 12.0 then phh superuser
Wizardlysense said:
Flash magisk 12.0 then phh superuser
Click to expand...
Click to collapse
I have.
Will try again now.
Wizardlysense said:
Flash magisk 12.0 then phh superuser
Click to expand...
Click to collapse
Ok so this is not the correct procedure for getting Magisk to work, this is exactly how it's done in my case at least.
1. Flash a rom of your choice ( in my case it was viper rom on the HTC 10, rooted with SuperSU, I have an international unlocked device with S-Off)
2. Extract the boot.img from your ROM ( in my case it was in the root of the rom's zip file)
3. Copy the boot.img to your Fastboot folder on your computer.
4. Install Magisk Manager and download Magisk 12.0 zip to your phone.
5. Reboot to download mode and then: fastboot flash boot boot.img allow it to flash, press power to come out.
6. Without rebooting, boot to recovery and flash the Magisk 12.0 zip.
7. Reboot and check the 3 sections to see if MagiskSU has been locked in, no warning should come up when activating Magisk hide.
Done.
I did a clean reset and installed a fresh android 9. So no root, nothing.
Anyways I install magisk 5.8.3 and then tried to patch the boot.img from the android 9 factory image.
But every time I select the boot.img and try to patch it, it says "Failed! ! Installion failed!".
How has everyone else tried to install magisk on android 9?
xringo said:
I did a clean reset and installed a fresh android 9. So no root, nothing.
Anyways I install magisk 5.8.3 and then tried to patch the boot.img from the android 9 factory image.
But every time I select the boot.img and try to patch it, it says "Failed! ! Installion failed!".
How has everyone else tried to install magisk on android 9?
Click to expand...
Click to collapse
Not the way you are doing it. I boot to TWRP, without installing it and have TWRP install the full zip.
Hm I'll try this. Used to the boot patching.
xringo said:
Hm I'll try this. Used to the boot patching.
Click to expand...
Click to collapse
Just dirty flashed 9 over dp5, booted to twrp and flashed magisk. Rooted, and all appears well.
lorax70 said:
Just dirty flashed 9 over dp5, booted to twrp and flashed magisk. Rooted, and all appears well.
Click to expand...
Click to collapse
You can give link file magisk for use on android 9.
newyesor said:
You can give link file magisk for use on android 9.
Click to expand...
Click to collapse
Fwiw. I've been using this magisk version for dp3-5, but there are newer versions, but 16.4 works for me...
https://thedroidarena.com/download-magisk-16-4-beta/
I may try a newer version at some point, but I'm in no rush.
newyesor said:
You can give link file magisk for use on android 9.
Click to expand...
Click to collapse
Got this from the Flash kernel thread. It works fine on Pie :good:
https://drive.google.com/file/d/106ZiqeQxNYtCHkOEc6niuHRcWiCzG_eA/view?usp=drivesdk
xringo said:
I did a clean reset and installed a fresh android 9. So no root, nothing.
Anyways I install magisk 5.8.3 and then tried to patch the boot.img from the android 9 factory image.
But every time I select the boot.img and try to patch it, it says "Failed! ! Installion failed!".
How has everyone else tried to install magisk on android 9?
Click to expand...
Click to collapse
Make sure your using 16.7 you have to change in setting to beta. Same thing happened to me trying to use 16.0
I get updater error :2 failed to install every freaking time. No matter what zip i use. 1600 1671 1674
After dirty flash (remove -w) Android 9 PPR1 then install Magisk 16.7, it seems I am not able to set PIN or any security... Anyone has the same issue?
I have the same issue TWRP also can't decript the phone. I am going to wipe everything, and fastboot erase userdata.
lssong99 said:
After dirty flash (remove -w) Android 9 PPR1 then install Magisk 16.7, it seems I am not able to set PIN or any security... Anyone has the same issue?
Click to expand...
Click to collapse
Sent from my Pixel 2 XL using Tapatalk
Airpil said:
I have the same issue TWRP also can't decript the phone. I am going to wipe everything, and fastboot erase userdata.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Don't wipe your phone! Just flash the new boot.img from the image file (not OTA file) and you will be able to go back to your Android system and disable the pin. After disable the pin, boot into TWRP and flash the Magisk from here https://forum.xda-developers.com/showpost.php?p=77240449&postcount=2832
Hope this helps!
madmuthertrucker said:
I get updater error :2 failed to install every freaking time. No matter what zip i use. 1600 1671 1674
Click to expand...
Click to collapse
Use magisk uninstall first and this should solve the issue.
lssong99 said:
After dirty flash (remove -w) Android 9 PPR1 then install Magisk 16.7, it seems I am not able to set PIN or any security... Anyone has the same issue?
Click to expand...
Click to collapse
I have flashed ota from dp5 and fresh install of 9 and I cannot use security with 3.2.1_2 or 3.2.2 TWRP
Brakiss said:
I have flashed ota from dp5 and fresh install of 9 and I cannot use security with 3.2.1_2 or 3.2.2 TWRP
Click to expand...
Click to collapse
There's a 3.2.3-0 out as well. It's reportedly able to decrypt using alphanumeric codes. However a straight 4 number pin still isn't working for me.
Badger50 said:
There's a 3.2.3-0 out as well. It's reportedly able to decrypt using alphanumeric codes. However a straight 4 number pin still isn't working for me.
Click to expand...
Click to collapse
Where did you see this? I have pattern and would like to keep it.
Brakiss said:
Where did you see this? I have pattern and would like to keep it.
Click to expand...
Click to collapse
One of the other threads. Here's the twrp version though. https://dl.twrp.me/taimen/
Been having issues myself since updating to Pie yesterday. TWRP installed working fine. Installed magisk manager, set to beta channel. Rebooted into TWRP and flashed magisk 16.7, phone hanging at the lovely google logo page. I then have to run the uninstaller back in TWRP or i cant get the phone to boot. Anyone had this?
pr1vate piles said:
Been having issues myself since updating to Pie yesterday. TWRP installed working fine. Installed magisk manager, set to beta channel. Rebooted into TWRP and flashed magisk 16.7, phone hanging at the lovely google logo page. I then have to run the uninstaller back in TWRP or i cant get the phone to boot. Anyone had this?
Click to expand...
Click to collapse
Yeah, rooting on P is a little tricky it seems. You'll likely have to run the uninstaller, then boot up. Then go back to twrp and flash this version of magisk. It's the 16.7(4) version found in the Flash kernel thread :good:
https://drive.google.com/file/d/106ZiqeQxNYtCHkOEc6niuHRcWiCzG_eA/view?usp=drivesdk
Badger50 said:
Yeah, rooting on P is a little tricky it seems. You'll likely have to run the uninstaller, then boot up. Then go back to twrp and flash this version of magisk. It's the 16.7(4) version found in the Flash kernel thread :good:
https://drive.google.com/file/d/106ZiqeQxNYtCHkOEc6niuHRcWiCzG_eA/view?usp=drivesdk
Click to expand...
Click to collapse
Your not wrong there. Tried it as you suggested, same thing, hanging at the G logo page with the bar animation under it. Had to run the uninstaller to get back into my phone. Very odd
Hey guys,
Just flashed the latest Oxygen update the way i always do but this time i lost root.
Running stock rom with root (Magisk) and TWRP.
Flashed update
Cleaned dalvik/cache
Flashed Magisk.zip
Cleaned dalvik/cache again
Reboot
Twrp is still there, bootloader unlocked, magisk manager works to...... But no root, magisk manager says "magisk is not installed"
Never had this issue before....
g-member said:
Hey guys,
Just flashed the latest Oxygen update the way i always do but this time i lost root.
Running stock rom with root (Magisk) and TWRP.
Flashed update
Cleaned dalvik/cache
Flashed Magisk.zip
Cleaned dalvik/cache again
Reboot
Twrp is still there, bootloader unlocked, magisk manager works to...... But no root, magisk manager says "magisk is not installed"
Never had this issue before....
Click to expand...
Click to collapse
Which oxygenOS? Which magisk version? Did you tried to flash magisk uninstaller before flashing the oxygenOS update and go ahead with the further steps?
Latest Oxygen, and no dit not uninstall magisk before flashing the update, never did and worked fine....
Using Magisk 17.00 latest
g-member said:
Latest Oxygen, and no dit not uninstall magisk before flashing the update, never did and worked fine....
Using Magisk 17.00 latest
Click to expand...
Click to collapse
Which oxygenOS(stable or beta)? Try to install magisk again, use v17. 3 if not working, flash uninstaller as mentioned before
That did the trick, thnx
g-member said:
That did the trick, thnx
Click to expand...
Click to collapse
Which one? To help others you can mark the thread as [SOLVED] in the headline:good:
First flashed the uninstaller and reflashed 17.3 Magisk.
How do i mark this post?
g-member said:
First flashed the uninstaller and reflashed 17.3 Magisk.
How do i mark this post?
Click to expand...
Click to collapse
Edit the title and add [SOLVED] at the beginning.
I have read many threads and lots of videos and cannot seem to get the Magisk installed.
I have flashed back to stock many times with (N900VVRUEOF1_N900VVZWEOF1_N900VVRUEOF1_HOME.tar.md5) in order to try multiple methods.
Rooted with Arabictoolapp - used rootchecker to verify/application also says true for root
followed: https://forum.xda-developers.com/ve...guide-ob6-of1-root-bootloader-unlock-t3439010
installed SU from playstore to unlock bootloader using the adp method - shows developer mode to verify - using eMMc to verify CID starts with 15
followed: https://forum.xda-developers.com/ve...l/official-note-3-verizon-bootloader-t3359370
installed twrp using official twrp app & also tried ODIN in another trial (picked verizon americas and got twrp-3.2.3-0-hlte.img.tar and twrp-3.2.3-0-hlte.img )
turned phone off and boot into recovery to verify; at this time i created a recovery
using MagiskManager i downloaded the zip (Magisk-v18.1.ip) and flashed using twrp - no errors but when i restart the phone it says Magisk not installed
next attempt was to extract the boot.img from the stock OF1 and then flash the Magisk - no errors but when i restarted the phone it says the same thing - Magisk not installed
another attempt was to patch the boot.img and got a patch_boot.img then using TWRP i flashed the patch_boot.img - restarted and magisk not installed
after further digging, i tried another method which was to unroot using SU, reboot, go into recovery to then install Magisk - magisk not installed
*note each attempt to install Magisk unrooted my phone
*was able to use Magisk-uninstaller-20190204.zip to uninstall Magisk manager from recovery - icon went away
anyways i am completely stuck now. any suggestions or comments on my approach?
jordanfan23 said:
installed SU from playstore to unlock bootloader using the adp method - shows developer mode to verify - using eMMc to verify CID starts with 15
followed:
Click to expand...
Click to collapse
Did you uninstall SU before trying to install magisk. The two together may cause conflict.
cssr said:
Did you uninstall SU before trying to install magisk. The two together may cause conflict.
Click to expand...
Click to collapse
Yes my last attempt i tried.
please help! there has got to be something i am doing wrong or missing. i can flash the uninstall zip and it does uninstall the magisk manager
@cssr any other input or suggestions?
jordanfan23 said:
@cssr any other input or suggestions?
Click to expand...
Click to collapse
Try twrp 2.8.7 hltevzw. You are using the stock ROM which is android 5. Twrp 3.1 and higher is for android 7 and up. I missed that the first time I read your post.
cssr said:
Try twrp 2.8.7 hltevzw. You are using the stock ROM which is android 5. Twrp 3.1 and higher is for android 7 and up. I missed that the first time I read your post.
Click to expand...
Click to collapse
no go =(
@cssr should i try another version of magisk?
jordanfan23 said:
@cssr should i try another version of magisk?
Click to expand...
Click to collapse
Yes. Are you installing Magisk .zip in twrp and installing Magisk Manager APK after normal reboot?
cssr said:
Yes. Are you installing Magisk .zip in twrp and installing Magisk Manager APK after normal reboot?
Click to expand...
Click to collapse
what do you mean after normal reboot? so flash magisk in twrp. reboot. reboot again then install magisk manager? do you know what version of magisk i should run and where i can find the dl link?
What he means is you install the Magisk ZIP via TWRP in Recovery mode, reboot the phone, then you install Magisk Manager via the APK.
Go to magiskmanager dot com website which has the ZIP installer plus the APK for the Manager.
I only just recently tried to tackle this challenge. I also installed 0F1 with Odin, then rooted with Arabic. I was messing with Pokemon go and it wasn't happy I was rooted. I downloaded magisk manager, installed it that way. At reboot, angry message from Verizon that I have custom software and phone won't boot. I assume this is because I didn't install custom recovery.
If you figure a way to get this done, I will be grateful. One thing I don't quite follow. Magisk is a root method...so should we really be rooting the phone prior? Seems redundant and going against the whole point of magisk. Right?
I wanted to play around with spoofing GPS with PGO which requires making a GPS spoofer a system app (need root for that). Is that still possible using magisk?
I'll post any updates I have as well.