Hello , today my phone after updating SuperSU and installing TWRP Manager but i didint install my recory from this app , my phone had already costum TW recovery and ROM that was working fine! after ive update super su and install this manager from TW , when i restarted my phone , i noticed that SIM password was not anymore needed and the phone did not recognise My SIM anymore , i tryed clean start of the phone, installed again the rom and wipe all but nothing happens .. also i noticed that my phone taking veeeeery long to shudown and also some times when i press shutdown the phone just close and open again it self.. its like my bootloader is damaged? and if yes how i can replace my boot loader? or what the hell happened with my phone.. btw i tried also 2 more differnet sims and problem remain..
I have galaxy s5 snapdragon edittion with xXx_NoLimits_6.1_G900FXXS1CQAV rom and bloeffa kernel , tested all of them and was working fine for months no problem at all.. any idea how i can fix my phone? thank you!
Did you make a backup of the whole rom before with a custom recovery? If yes, try restoring the efs folder.
thank you very much bro , yeap I had backup of clean install from my Costum Rom when it was clean before few months , restored with TW the EFS folder and phone now its working fine again , thank you very very much.
Related
Hello all hope you will be able to help me.
Device : Nexus S I 9020
So basicly iam kinda new to whole this world of "android" former Iphone user.
last mounth i got my nexus S wich is my first android phone.
As soon as i got it i started to read guids and etc.
Root the device and ofc the nexy step was trying Rom`s.
but then a problem , every time i try to flash a rom i get status 7 error.
tryed every possible combination of restore / wipe etc...
nothing helped , so i came back to the stock one (backup i made before i started)
after a while i discovered the app Rom mananger , wich install rom update recovery etc...
so i updated my recovery and installed CM7 using it.
used it for a while and went back to the stock.
after cople of days tryed to install MIUI using rom manger every thing went clear and after the intall device reboot it self and then stuck on the Google logo with the lock in the botom of the screen.
and nothing helped since then restore , factory reset/restore / wipe`s etc.
as last resort i tryed Odin and it worked like a charm got my device back and runing.
today i tryed to install a new rom AOASP(i think , or some thing like that) in the first time from the recovery (several times) with every possible wipe.
all the time status 7 error , then went to rom mananger and again same thing.
stuck on the google logo.
now iam gonna use Odin again hope it will work this time too.
Any idea how to resolve it , or why this is happen ?
and how can i resolve the status 7 error and what does it mean ?
Thank you all.
(sorry for this been so long , wanted to give as much details as possible)
Contact this guy. Looks like the same problem. If you can't get it going, I can also fix it so just PM me...
http://forum.xda-developers.com/showthread.php?t=1091789
doesnt seem to be the same problem like i had.
Any way at this point i was able to restore my phone using Odin , and then restore it into my stock backup (including all my data and etc...)
but the problem remain the same.
cant install any rom (status 7 error).
and when i try to install any rom using Rom mananger iam stuck on the google logo after the reboot.
so what can i do ?
Problem solved by using Odin ro restore it and after that flash Nanbackup and finally updating the CWM recovery.
If any one get the problem try this
Btw SuperAOSP is GREAT !!!!
gl all.
Hi all,
I have Note 3 N9005 LTE 32G, It is unlocked, I had X-note v15 custom rom installed on this phone, as i attempted to reinstall stock firmware, I was with an error called "System.img (ext4). I have tried all the possible reasons online but failed to work. At the end of the day i had enough and I wanted to go back to xnote as it was functional and i needed my phone. As i flashed X-Note using CWM, it was loading all fine and the start up of the installation was successful with no errors. However after the installation, it asks me that i need to restarted the phone, once i restarted, My phone was Stuck on "Samsung Galaxy Note 3 SM-N9005" LOGO!! I have waited for hours and still would be stuck on the same logo! I have tried reinstalling the rom about 3 times and I still had the same issue.
Please help on how can I get my phone operating again!!!! My knox is tripped, however xnote was working but now nothing is working! PLease recommend any solution to this problem, and feel free to contact me for further information!
alanl3oss said:
Hi all,
I have Note 3 N9005 LTE 32G, It is unlocked, I had X-note v15 custom rom installed on this phone, as i attempted to reinstall stock firmware, I was with an error called "System.img (ext4). I have tried all the possible reasons online but failed to work. At the end of the day i had enough and I wanted to go back to xnote as it was functional and i needed my phone. As i flashed X-Note using CWM, it was loading all fine and the start up of the installation was successful with no errors. However after the installation, it asks me that i need to restarted the phone, once i restarted, My phone was Stuck on "Samsung Galaxy Note 3 SM-N9005" LOGO!! I have waited for hours and still would be stuck on the same logo! I have tried reinstalling the rom about 3 times and I still had the same issue.
Please help on how can I get my phone operating again!!!! My knox is tripped, however xnote was working but now nothing is working! PLease recommend any solution to this problem, and feel free to contact me for further information!
Click to expand...
Click to collapse
Make sure you are using the correct version of X-Note. If its the kitkat version then you have to already be on kitkat. Also, you could try Temasek's CM11 port. That worked for me . Make sure you backup your EFS partition (basically backup ALL partitions in TWRP/CWM or use EFS Pro). Don't want you making the same mistake that I made.
I have fixed the problem by going into the cmw and did the following:
Delete system files
Delete Cache
Delete Partition
Format Sd card
Format all user data
After i did the following, X note did work. I think i did the same process i could be able to install the the stock ROM.
Thank you anyway.
same problem
hi...
i do an installetion and it install good.
wen i do reboot after install, it stuk on the galaxy note 3 first page.
plees help....
i am sury for my inglesh.....
Format partition
Hi
Go to recovery , hold power, home and volume up while booting to enter recovery , if you have have CWM recovery , select mount and storage. you need to format your SD card, format system, clear cache data ansd clear partition, basicallt format whatever you see that says formart. then try reinstalling x note.
NOTE : THIS WILL WIPE YOUR ENTIRE SD CARD DATA !!!!
Please give a thanks up if your problem is solved. Thank you
I olso ned to format.... Modem and every thing els.....
---------- Post added at 06:15 AM ---------- Previous post was at 06:07 AM ----------
hulyok said:
I olso ned to format.... Modem and every thing els.....
Click to expand...
Click to collapse
And, wats the best v to install.....
v15
Well I dont know the latest version but v15 should do. Visit XDA xnote page for the latest info regarding xnote firmware.
Thank you
. I solved the problem and installed the latest version 18
First of all thank you very much for your help. I solved the problem and installed the latest version 18. Beginning it stuck in my after installation as before ... but what I did was to install another kernel that is what solved my problem and I am currently using fun at x-note v 18. Thanks for the help ... If someone encountered a similar problem feel free to install kernel that suits his area.
Hi everyone i have a realy strange problem with my phone and i'm deperate for a solution. Yesterday i instaled this rom: http://forum.xda-developers.com/showthread.php?t=2681888 and after a few hours the system got realy unstable so i desided to change it. Like all the other times i went to recovery (Philz Touch 6) ->Wipe and Format -> clean to install New Rom and then went ahead to install another including gapps. Everything seemed to work fine until i rebboted my device and in my surprize my phone booted back to Caliban . I tried everything even kdz to original rom but nothing happened , my phone is haunted by this rom and can't remove it no matter what i try. I Tred installing cwm to no avail and i even tried unlocking bootloader in case that was the problem.v Please help me get reed off this rom.
Hey guys,
the phone:
Samsung Galaxy S5 SM-G900F
Last official firmware:
G900FXXU1POJ2 (VD2) 5.0 Germany
I flashed TWRP via Odin
Then SuperSU via ODIN
Then installed a custom recovery.
After full install and reboot it hangs on the first screen and I cannot touch it. It won't do anything. Reboots, deleting cache won't help.
Do you know what I did wrong or why I can't use my phone anymore?
mrclaver said:
Hey guys,
the phone:
Samsung Galaxy S5 SM-G900F
Last official firmware:
G900FXXU1POJ2 (VD2) 5.0 Germany
I flashed TWRP via Odin
Then SuperSU via ODIN
Then installed a custom recovery.
After full install and reboot it hangs on the first screen and I cannot touch it. It won't do anything. Reboots, deleting cache won't help.
Do you know what I did wrong or why I can't use my phone anymore?
Click to expand...
Click to collapse
I installed a freshly new official stock rom, it'll boot but won't go any further and bootloops.
Then I tried a CM - ROM and it's the same with another rom. The touchscreen doesn't work. But the touch works on TWRP. That's really weird.
It freezes, the LED is always on and the softbuttons too.
ask you if you have this problem before root
lol twrp is costume recovery and just flash twrp and applied the supersu.zip and its done phone rooted
but if you have problem after touch think
1- you don't flash the true cm ( klte is for 900F )
2- your touch panel is damaged
3- for your original stock rom ( lag ) ty to wipe data and cache ( attention you will lose your data with )
popmpopm said:
ask you if you have this problem before root
lol twrp is costume recovery and just flash twrp and applied the supersu.zip and its done phone rooted
but if you have problem after touch think
1- you don't flash the true cm ( klte is for 900F )
2- your touch panel is damaged
3- for your original stock rom ( lag ) ty to wipe data and cache ( attention you will lose your data with )
Click to expand...
Click to collapse
- I was on official vodafone germany firmware.
- Phone told me to get the last update
- Phone installed last update
- After installation phone was bootloopin
- I did hard reset
- Phone booted up until it said, that it is installing a few applications (you know what I mean)
- While installing progress of that it restarted and installed and restarted and so on..
So I decided to get a custom rom.
- I flashed TWRP for KFTL (I have SM-G900F) via ODIN.
- Everything works fine.
- I flashed Chainfires SuperSU via ODIN.
- Everything works fine.
- I installed a custom ROM (eg: The Galaxy Project)
- It booted and then freezes.
So after that I was afraid and flashed a stock rom via Odin but it was the same with the official OTA-update from Samsung. Reboots while installing first apps.
Then I tried with CM but it freezes too. I am sure it has nothing to do with the screen.
On official (stock) ROMs it reboots while installing first apps.
On custom ROMs it freezes. It won't go any further. It must be something else. Any ideas?
BTW: I have another SM-G900F and it works flawlessly. I know that I am doing.
what y mean freeze the phone or just touch ( but bottom work like vol )
if only touch think is damaged
popmpopm said:
what y mean freeze the phone or just touch ( but bottom work like vol )
if only touch think is damaged
Click to expand...
Click to collapse
Hm. If you boot up your phone for the first time or after hard reset or after an update it boots up and then there comes the very first message that android is preparing the apps for the first start, right? On official firmware it bootloops when that message comes.
On CyanogenMod it boots until this Screen:
And then it freezes.
I can't believe that it has to be the touch panel, because everything works fine in TWRP. The phone won't let me go any further than the first Screen. And the touch can't be damaged. Before I did the official Samsung update everything works fine.
mrclaver said:
Hm. If you boot up your phone for the first time or after hard reset or after an update it boots up and then there comes the very first message that android is preparing the apps for the first start, right? On official firmware it bootloops when that message comes.
On CyanogenMod it boots until this Screen:
And then it freezes.
I can't believe that it has to be the touch panel, because everything works fine in TWRP. The phone won't let me go any further than the first Screen. And the touch can't be damaged. Before I did the official Samsung update everything works fine.
Click to expand...
Click to collapse
y don't understand me the bottom work or not when phone is on freeze moment if yes think is not touch is all phone ( cpu ram some thing hardware )
i've had my phone for around ten days and like most of u i ve installed twrp then cm 12.1 ( installed linaro kernel also ) but rather didin't like so i took back to nandroid backup and get my stock rom again ( the phone got luggy and didin't open apss easly ) , idk what happend but an update screen to 6.0.1 just pop up around and from that time the phone cpu started to go up crazy with no apps installed i am just using fb lite and the phone goes up to 50 and screen is hot i ve tried many stock roms but none of them worked the phone at idle is 40 ° and in use 50 ° even in twrp mode it stays at around 45° , (i remember installing root booster when i was in 6.0.1 )
my phone seems like thermal broken my question is that cpu config remain when u flash another rom ?
and there is anyway to fix what happend ? pls help me i've tried almost everything
is there a way to total reset the phone from step 0 ? ( not talking about wiping normal data and installing roms thew odin )
wadhah1000 said:
i've had my phone for around ten days and like most of u i ve installed twrp then cm 12.1 ( installed linaro kernel also ) but rather didin't like so i took back to nandroid backup and get my stock rom again ( the phone got luggy and didin't open apss easly ) , idk what happend but an update screen to 6.0.1 just pop up around and from that time the phone cpu started to go up crazy with no apps installed i am just using fb lite and the phone goes up to 50 and screen is hot i ve tried many stock roms but none of them worked the phone at idle is 40 ° and in use 50 ° even in twrp mode it stays at around 45° , (i remember installing root booster when i was in 6.0.1 )
my phone seems like thermal broken my question is that cpu config remain when u flash another rom ?
and there is anyway to fix what happend ? pls help me i've tried almost everything
is there a way to total reset the phone from step 0 ? ( not talking about wiping normal data and installing roms thew odin )
Click to expand...
Click to collapse
try an Advanced wipe from recovery
select all except internal storage and micro sdcard
then restore your backup
i resume you have the proper TWRPrecovery3.0.2.0
that mean if your backup is 5.1.1 rom you should use TWRPrecovery3.0.2.0 for 5.1.1
-if your backup is 6.0.1 rom you should use TRWPrecovery3.0.2.0 for 6.0.1
vaserbanix said:
try an Advanced wipe from recovery
select all except internal storage and micro sdcard
then restore your backup
i resume you have the proper TWRPrecovery3.0.2.0
that mean if your backup is 5.1.1 rom you should use TWRPrecovery3.0.2.0 for 5.1.1
-if your backup is 6.0.1 rom you should use TRWPrecovery3.0.2.0 for 6.0.1
Click to expand...
Click to collapse
WHEN I SAID WIPE i meant advanced wipe for sure even restoring the backup didin't solve the problem
wadhah1000 said:
WHEN I SAID WIPE i meant advanced wipe for sure even restoring the backup didin't solve the problem
Click to expand...
Click to collapse
you should flash stok rom with ODIN, root, install TWRP, restore backup
it's a little bit to work but just after that you can make worry about heating
vaserbanix said:
you should flash stok rom with ODIN, root, install TWRP, restore backup
it's a little bit to work but just after that you can make worry about heating
Click to expand...
Click to collapse
i tried that and it didin't work