Related
wanted to install wp7 with a clean start...so tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
How did you fix it? For other users in this position.
Sent from my HTC HD2 using XDA App
SOLVED {bootloader dont loadArrow}
Here is what I did..
B4 that some background -
I used to heavily try different roms/mods and always played with android sd and nand versions…win 6.5X in multiple cooked version….
So my tmo-hd2 has been formatted/hard reseted/flashed many many times
By virtue of this….my screen died….slowly my screen touch responsiveness malfunctioned and eventually died… all hardware keys were working perfectly by the touch was dead….
During the process of screen malfunction to completely dead….made few observations to not things which might help fellow Hd2 owners…one thing is power/end key seems to be the culprit (this is my observation/belief).
Since I don’t live in US spend 100$ in changing the screen since then everything is working well…I still rig my hd2 like I always do…
Well when the wp7 was released, wanted to give a try…did this…hspl pkg 3 spl 2.08 hspl > then task 29 > and my hd2 didn’t get into bootloader at all…..i was doomed as there hd2 (after task29) didn’t hv os..
Searched for the solution everywhere and eventually nothing worked for me…I was about to give up…suddenly sometime struck my mind…wat if the power/end key is the problem….then things were positive..
I opened up my hd2 (unscrew and removed the back panel) and disconnected the connector flex rigid board (A board) of the hardware keypad from the mainboard….and pushed the battery in and pressed reset (sometime u need to plugin the usb cable to wall charged/pc to wake up the phone) and held volume down key and hopped for some miracle.
Viola saw the tricolor screen after eternity – since the back panel (not backcover) was open I help the battery to the pins and didn’t even move my fingers …run the stock rom installation and held the battery tight in place and waited to get the rom completed…the moment its 100% relaxed my fingers and reconnected the flexboard connector, re-assembled my phone and everything was back to normal…
ONE THING I LEARND FROM THIS…..HD2 IS A ROCKING PHONE AND U CAN RESURRECT IT WHATEVER HAPPENS TO IT (if at all some1 screws it with wrong radio…its officially bricked, but still it can be revived using RIFF JTAG method and rewrite boot data).
One final request pls DON’T GIVEUP ON YOUR DEVISE
Now I have wp7 running successfully and waiting for my activation code for live services
_____________________________________________________________
Thank me if this was useful
I can confirm this does work. I myself was going to give up until I found this and well thank you!
fcpelayo said:
I can confirm this does work. I myself was going to give up until I found this and well thank you!
Click to expand...
Click to collapse
happy it worked for you....promote this solution....others might benefit.
also hit thanks if u think its worth it
May I link to or rewrite and credit you with this in my guide?
interesting, two confirmations in this thread, and there's another thread where 2/3 people successfully used this method.
That whole lower right area is the Achilles Heel of this phone, keypad, screen connector and most pressed key all right in one little place.
Bring me the chief designers head on a plate!
Yes. The only downfall of the hd2. I wish it had the soft screen keys at the bottom.
Sent from my HD2 using xda premium
kylew1212 said:
May I link to or rewrite and credit you with this in my guide?
Click to expand...
Click to collapse
Would like to divert folks to this thread and share experiences here so every one will hit the same link to get benefit, If thats oki with you. let me know
samsamuel said:
interesting, two confirmations in this thread, and there's another thread where 2/3 people successfully used this method.
That whole lower right area is the Achilles Heel of this phone, keypad, screen connector and most pressed key all right in one little place.
Bring me the chief designers head on a plate!
Click to expand...
Click to collapse
yup...and the interesting thing is, i befriended an HTC engineer and got hold of multiple 'a-boards' at that time to test this out.the flex-board that reacts when we push the button.
there were multiple models/molds for HD2...may be different production lines..everything did the same job including the one which was shipped with the device..'a-board' wasnt the culprit here..the very design of having power + end call + device unlock in the same key/button is the issue.
All of us N1 owners know that the power button can be prone to failure over time.
Right now I use the "NoLock" app as well as the Lock Widget to make sure I don't have to push the power button that much (I instead use the volume keys to wake up the phone and the Lock Widget to put it to sleep)
I was wondering though... If in the future (like a year from now) when/if my power button fails... How do I turn on my phone once it powers off? Is there a way to do this if the power button doesn't work anymore?
Also is there a way to do this WITHOUT rooting? Really don't like rooting my phone
You could always get a replacement flex cable including a new power button.
ap3604 said:
All of us N1 owners know that the power button can be prone to failure over time.
Right now I use the "NoLock" app as well as the Lock Widget to make sure I don't have to push the power button that much (I instead use the volume keys to wake up the phone and the Lock Widget to put it to sleep)
I was wondering though... If in the future (like a year from now) when/if my power button fails... How do I turn on my phone once it powers off? Is there a way to do this if the power button doesn't work anymore?
Also is there a way to do this WITHOUT rooting? Really don't like rooting my phone
Click to expand...
Click to collapse
Its been almost a year and my power button is fine. Don't worry about things that might or might not happen
Remove the battery, plug in the USB/power cable and put the battery back in. Something like that anyway, I've already forgotten how I did it 2 months ago (lots happening here in Japan, many things aren't that important anymore in my memory! haha), and got my power button repaired anyway, but it worked.
siddharthsai said:
Its been almost a year and my power button is fine. Don't worry about things that might or might not happen
Click to expand...
Click to collapse
Agreed. I believe only a very limited number of phones have this failure. Don't worry about it, if you've made it a year without issue, it is very unlikely you're going to ever see it.
I'm pretty sure this problem only affected the initial batch of N1's. So only those who bought in January would have this problem.
If you have the flat volume rockers you don't have an initial N1. Apparently the first lot have volume buttons that stuck out more and some other visible changes that I can't remember. They should be on these forums somewhere.
But correct me if I'm wrong...
My power button is almost dead, but the combination of trackball wake (with cyanogenmod) and screen off and lock (market app) assigned to long-press search is quite painless.
The only remaining problem is iPhone users making fun of you when you explain the issue to them ...
Yeah,
With roms like CM7 (vol- equals wake from sleep) and Quick Boot, the pwr button and TB almost become unneeded
I never turn my phone off--charger at work, home, and in car
I've had 2 power button cables die on me.
one, I sent back, and when I got a replacement, it died on me within a month. I still have a second n1 which is ok.
basically, if your button starts to get to the point where you have to do multiple pushes, then cable failure is imminent.
you can get the phone to turn on, by plugging in the charging cable, and removing/ inserting the battery. after that, you need to have no lock or some other way of unlocking your screen without the power button.
I just ordered a new flex cable today, I was going to sell off parts for my other n1, but figure that I might as well fix it.
I plugged my N1 in to charge while it was off and it booted into recovery. Not sure if this is related to Amon_Ra or not, but I figured it wasn't a bad thing. The DZ does this too, so I'm getting used to it
seydhe said:
The only remaining problem is iPhone users making fun of you when you explain the issue to them ...
Click to expand...
Click to collapse
At which point you remind them of the SMS bug that allowed hackers to take over their precious iphones. Also, antennagate.
crachel said:
I plugged my N1 in to charge while it was off and it booted into recovery. Not sure if this is related to Amon_Ra or not, but I figured it wasn't a bad thing. The DZ does this too, so I'm getting used to it
Click to expand...
Click to collapse
I guess some SW has to control the charge. It's a function that is done in the stock recovery (phone charging when it's off), on many Android phones.
I ordered three of the AT&T N1's - one for myself when they were first released, then two more (for my wife and a friend) just before they stopped selling them. None of us have had a problem with the power button, and none of us use trackball wake.
So, I cannot seem to get into bootloader on an HD2. This isn't my phone and I did not perform the original flash, so I'm not quite as familiar with the HD2 toolchain.
The problem is simple, I cannot load into the tri color bootloader. I haven't ever been able to, so I don't have anything to trace to what apparently removed it.
I still can however use MAGLDR to boot android from NAND and flash android roms etc.
The trouble is this phone needs to be shipped to HTC for repair and I need to restore to stock, but I cannot reach boot loader to use any tools or flash any stock roms etc. I saw something on the JTAG restore product but I thought wasn't ideal if still under warranty.
Pretty desperate here since the warranty period ends real soon. thanks for any help!
Just to make sure....In order to reach the boot loader screen, you need to turn off the phone and then hold the volume down button and power button until the boot loader screen pops up. Just making sure you did this!
yeah, been trying that to no avail
Can still get to MAGDLR real easy though.
thanks
waste55 said:
yeah, been trying that to no avail
Can still get to MAGDLR real easy though.
thanks
Click to expand...
Click to collapse
Out of curiosity, are any of your buttons not working?
most are working just fine. Only weird this is the red hang up\power button brings up the shut down menu on a single press from time to time once inside android. I believe it to be caused the original issue (random boot lock ups that take anywhere from 2 min to boot android or 25 min, or doesn't at all before battery dies) but this phone has been so flaky its been impossible at times to reproduce results.
waste55 said:
most are working just fine. Only weird this is the red hang up\power button brings up the shut down menu on a single press from time to time once inside android. I believe it to be caused the original issue (random boot lock ups that take anywhere from 2 min to boot android or 25 min, or doesn't at all before battery dies) but this phone has been so flaky its been impossible at times to reproduce results.
Click to expand...
Click to collapse
Hi,
10 char
After over a year of flashing different roms with no issues, I'm also now having a similar problem...
http://forum.xda-developers.com/showthread.php?t=1189115
malybru said:
Hi,
10 char
Click to expand...
Click to collapse
Thanks for the response, I'm not to familiar with the hd2 tools/commands is this likely to help with the power button issue or the "missing" bootloader? Sorry for not googling but have limited connection atm so barley got this message out
waste55 said:
Thanks for the response, I'm not to familiar with the hd2 tools/commands is this likely to help with the power button issue or the "missing" bootloader? Sorry for not googling but have limited connection atm so barley got this message out
Click to expand...
Click to collapse
HI,
My reply was not relevant.
Sorry I could not help.
If I am reading right this sounds like a similar issue which I had. I went from my car which had really cold A/C and then went to my room which was really hot. There was condensation on the phone and did not think much of it. My buttons started either acting strange or not working. First I tried putting the phone in some rice as rice tends to attract water molecules. This did not work. I then sprayed windex with the phone off and batter, sdcard, simcard out and then wiped down the phone put it in the rice for about an hour or 2. After I did this a few times my buttons started working normal again. No more safe mode and all my buttons work.
Either that or your volume down button is just not working. In which case I don't believe there is any other way to enter the bootloader. If you can connect through microsoft activesync you may be able to restore the original windows 6.5 that way.
Only thing is the vol down button works fine once boot in android. Power button is only weird one and its only acting up depending on the moon phase apparently.
Sent from my HTC Vision using XDA App
Ok so I was searching for some links on using active sync to flash but any guide I find also is using HSPL to do the flash which is not apparently present on the device. Would you happen to have any links on performing a flash via active sync that doesn't involve any sort of SPL?
Thanks a bunch
Sent from my HTC Vision using XDA App
HSPL is what is used to flash any rom that is not an original from tmobile. SPL is the original that would have come onto the phone and locks the phone from installing any roms except tmobile. With the hspl program you need to be able to boot into boot loader. I have tried windows mobile device center which is what is used in windows 7 instead of active sync but it does not connect. I am afraid that you are stuck unless you can get into boot loader somehow. The only way I know is to hold the volume down button as soon as you power the phone on.
waste55 said:
Ok so I was searching for some links on using active sync to flash but any guide I find also is using HSPL to do the flash which is not apparently present on the device. Would you happen to have any links on performing a flash via active sync that doesn't involve any sort of SPL?
Thanks a bunch
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I'm sending mine back to HTC
FINALLY!
All I did was...wait. I took the battery out for a couple hours, and tried again and bam it came up! I tried for like two days before this. I then followed the standard LEOIMG.nbh to the sd card and it restored win mobile and SPL just fine.
I guess it sounds crazy but just take the battery out for a while or overnight perhaps. I really didn't do anything so that's all I have to offer.
I think this HD2 has an overheating issue or something because it starts to act up once on after a while (power button...boot problems as described above).
Awesome guides! No doubt about that. I'm not a complete noob but I am new to the HD2 and I feel stupid bc I can't get past the first step I am frustrated cuz I have been looking all over for ways to check SPL my trio screen that everyone talks about is not coming up. Idk what to do. I've done the volume down with power button and also tried pressing the reset button in the back just to see if it works. I boot into Windows to make sure the volume down works and it does.
I have the tmobile version Leo 1024. Any suggestions.
Sent from my HTC Amaze 4G using xda premium
fcpelayo said:
Awesome guides! No doubt about that. I'm not a complete noob but I am new to the HD2 and I feel stupid bc I can't get past the first step I am frustrated cuz I have been looking all over for ways to check SPL my trio screen that everyone talks about is not coming up. Idk what to do. I've done the volume down with power button and also tried pressing the reset button in the back just to see if it works. I boot into Windows to make sure the volume down works and it does.
I have the tmobile version Leo 1024. Any suggestions.
Sent from my HTC Amaze 4G using xda premium
Click to expand...
Click to collapse
Pull battery, press volume down and hold, push power and hold both. Tri color screen should be there.
Sent from my HD2 using xda premium
Like everyone says. Volume down + end key.
Hold the volume down until the tri-color screen shows up.
I know you've said that.. just make sure you continue to hold volume down
Maybe that will help.
thank you guys but idk why it is not working but i finally managed to get it to bootloader by trying to install hspl3 it automatically sent me to the bootloader screen. After it said "we hacked it" i rebooted and tried to see if it would work with the typical hardware button
voldwn + power button and then let go and it still does not work.? :/
ps . i let go of power button but kept holding the voldwn and still did not work.
fcpelayo said:
thank you guys but idk why it is not working but i finally managed to get it to bootloader by trying to install hspl3 it automatically sent me to the bootloader screen. After it said "we hacked it" i rebooted and tried to see if it would work with the typical hardware button
voldwn + power button and then let go and it still does not work.? :/
ps . i let go of power button but kept holding the voldwn and still did not work.
Click to expand...
Click to collapse
You are completely turning off your phone and then doing this to power it up right?
Sent from my HD2 using xda premium
Yes and so I started following your guide to install clk since I know that I at least now have hspl3 installed and in the part where you task29 I followed instructions successfully flashed. Everything is going well until you say to reboot into boot loader mode by removing battery and voldwn + power. I try it hoping it would finally work and it doesn't.
Make story short my phone is stuck at the "stick together" screen. I tried getting into boot loader mode by running the hspl install program but bc is stuck on the screen comp is not able to recognize phone. Am I bricked?
Btw I pm you Kylew
Sent from my HTC Amaze 4G using xda premium
Nice, real slick move,, you can't get into bootloader, yet you still decide to go ahead and wipe the OS, so now you have a non booting phone and no access to bootloader.
That's a handsome if totally useless lump of glass and plastic you have there!
JTAG, or sell for spares. (Well, after trying everything you can think of, but all I can think of is freezer trick, but its a loooooong shot. )
samsamuel said:
Nice, real slick move,, you can't get into bootloader, yet you still decide to go ahead and wipe the OS, so now you have a non booting phone and no access to bootloader.
That's a handsome if totally useless lump of glass and plastic you have there!
JTAG, or sell for spares. (Well, after trying everything you can think of, but all I can think of is freezer trick, but its a loooooong shot. )
Click to expand...
Click to collapse
what is jtag and whats the freezer trick? is there any other way to get into bootloader mode maybe with sd?
Im willing to open the phone and remove or unplug a strip to completely erase any stored data and hope that it boots into bootloader?
SOLVED!! hope this helps someone else
i got it to work. My god there are soo many ppl with this phone soo many threads and post not sure if thats a good or bad thing lol anyways out of all the searching I found this guy to have had the same as me and he solved it. It was impossible for me to ever i mean EVER boot in to the trio color screen or bootloader what ever its called using the hardware buttons even tho the hardware buttons do work. I was able to get into bootloader when comp and phone sync and I used the hspl3 program to boot the phone when it was fully on the win mo stock.
Anyways I just followed this :
http://forum.xda-developers.com/showpost.php?p=10644926&postcount=4
I opened up my hd2 (unscrew and removed the back panel) and disconnected the connector flex rigid board (A board) of the hardware keypad from the mainboard….and pushed the battery in and pressed reset (sometime u need to plugin the usb cable to wall charged/pc to wake up the phone) and held volume down key and hopped for some miracle.
Viola saw the tricolor screen after eternity – since the back panel (not backcover) was open I help the battery to the pins and didn’t even move my fingers …run the stock rom installation and held the battery tight in place and waited to get the rom completed…the moment its 100% relaxed my fingers and reconnected the flexboard connector, re-assembled my phone and everything was back to normal.
I also used these pages for reference on parts:
http://www.ifixit.com/pdf/ifixit/guide_5919_en.pdf
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
ps. no need to take the whole phone apart. I believe you are disconecting the AP FPC from main board which is connected to your hardware buttons if I am correct.
Edit: I want to give credit to kylew1212 for walking me through the rest of the installation of my android.
Interesting, good job.
i have a lot of sympathy for his viewson peace
Hi guys.
My Galaxy Note 3 power button has just completely stopped working. Is there a setting that turns off the power button functionality that I might have accidentally pressed?
Cheers.
Edit: I should elaborate here. The phone is switched on, everything works as normal but no matter how many times I try it, the power button just not do anything (holding it down, pressing different areas)
DaveyT said:
Hi guys.
My Galaxy Note 3 power button has just completely stopped working. Is there a setting that turns off the power button functionality that I might have accidentally pressed?
Cheers.
Edit: I should elaborate here. The phone is switched on, everything works as normal but no matter how many times I try it, the power button just not do anything (holding it down, pressing different areas)
Click to expand...
Click to collapse
Did you try a battery reset? With the phone off, can you get into either Download or Recovery mode? That would eliminate the possibility of an OS issue.
lmike6453 said:
Did you try a battery reset? With the phone off, can you get into either Download or Recovery mode? That would eliminate the possibility of an OS issue.
Click to expand...
Click to collapse
I kind of scared to turn the thing off in case I can't switch it back on. I'll try it though.
Edit: It's dead. Taken the battery but can't switch back on now. What a joke.
Bad luck brian i feel sorry for you
tarekkkkk said:
Bad luck brian i feel sorry for you
Click to expand...
Click to collapse
I know I kind of expect this bad luck these days after having two faulty Nexus 7's. My Galaxy S2 power button is still going strong after 2 and a half years but the Note 3 lasts 7 hours
DaveyT said:
Hi guys.
My Galaxy Note 3 power button has just completely stopped working. Is there a setting that turns off the power button functionality that I might have accidentally pressed?
Cheers.
Edit: I should elaborate here. The phone is switched on, everything works as normal but no matter how many times I try it, the power button just not do anything (holding it down, pressing different areas)
Click to expand...
Click to collapse
It's a dud mate. Faulty unit.
Just send it back and get it replaced.
Just send it for replacement. There's a reason phones come with a warranty that covers manufacturer defects. Whining about it to strangers in the forum is not going to fix it for you.
Sent from my SM-N9005 using XDA Premium 4 mobile app
MohJee said:
Just send it for replacement. There's a reason phones come with a warranty that covers manufacturer defects. Whining about it to strangers in the forum is not going to fix it for you.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was posting to see if any one else had the same problem or if it was a setting I'd missed. Arsehole.
Cheers everyone else I'll replace it tomorrow.
This is exactly the sort of thing that makes me worry about voiding my warranty. Decisions, decisions....
DaveyT said:
I was posting to see if any one else had the same problem or if it was a setting I'd missed. Arsehole.
Cheers everyone else I'll replace it tomorrow.
Click to expand...
Click to collapse
Yeah this is definitely the least friendly of all the Android forums. Sorry to hear you have a dud unit mate. Get it replaced.
My power button is not working to turn the screen off. Long press works to bring up the power down menu or to do a hard shut down. It works to turn back on though. Seems to happen after I plug it into the wall charger. Restoring a nandroid backup fixes the issue.
Not sure if it's related but my PC's USB crashed after trying to plug the phone in and use USB 3.0 to transfer files. I had to refresh my W8 PC to get the USB working again.
I have the Sprint version, rooted and running JellyBomb.
Hello bro...Me to facing same problem of power button issue.But my phone was able to get into recovery mode and it is also turning on.After doing hard reset also still the problem not solved.My phone is working perfectly but only problem is I'm unable to lock and power off the phone.Please help me dude.
ajayajay007 said:
Hello bro...Me to facing same problem of power button issue.But my phone was able to get into recovery mode and it is also turning on.After doing hard reset also still the problem not solved.My phone is working perfectly but only problem is I'm unable to lock and power off the phone.Please help me dude.
Click to expand...
Click to collapse
I have the same problem. my power button is done for. whenever i need to start it. I plug it in and go into recovery and reboot from there. I also use this https://play.google.com/store/apps/details?id=com.plexnor.gravityscreenoffpro&hl=en for screen timeout and lock. And you can also get exposed and gravity box and there is a status bar tweak to double tap the status bar to lock screen (put phone to sleep).
I tried everything then found the solution on another website
My note 3 has been with me for almost 2 years now and it's power button stopped working about 2-3 months ago. Until now I avoided draining the battery below 2% and was fine but just today I dropped my phone and it shut down. I knew that my power button didn't work because of hardware problems so a soft reset didn't work for me. What I found however is that if your power button is dead you can just very quickly remove and re-insert your battery and your samsung device (I have no idea if this works on other brands) automatically boots itself. I'll give the link too incase I wasn't clear enough and I hope this helps people who shared my worries.
http : // www . teckdiary . com / samsung / how-to-start-your-samsung-galaxy-phonewhen-its-power-button-doesnt-work/
You'll have to delete the spaces in that link sorry about that