Database Users

List of Every Firmware Version for Chinese model.

So I've managed to find a treasure trove of firmwares for the Chinese model. Particularly interesting is that many early beta versions are available, from before release. Although there really may not be anything useful yet, I should be able to find new updates before they are released. Here is a list of all that's available. If you need any of these files, let me know. Note that anything under 1GB is most likely an OTA, though.
X100-AL10C00B057 (244MB)
X100-AL10C00B058 (280MB)
X100-AL10C00B059SP01 (224MB)
X100-AL10C00B059SP01 (298MB)
NXT-AL10C00B100 (356MB)
NXT-AL10C00B100 (1689MB)
NXT-AL10C00B100SP01 (215MB)
NXT-AL10C00B100SP02 (280MB)
NXT-AL10C00B100SP03 (283MB)
NXT-AL10C00B101 (355MB)
NXT-AL10C00B101SP06 (188MB)
NXT-AL10C00B101SP06 (1727MB)
NXT-AL10C00B101SP02 (106MB)
NXT-AL10C00B101SP02 (1631MB)
NXT-AL10C00B102 (95MB)
NXT-AL10C00B102 (1623MB)
NXT-AL10C00B102SP06 (1729MB)
NXT-AL10C00B105 (226MB)
NXT-AL10C00B106 (138MB)
NXT-AL10C00B106 (1624MB)
NXT-AL10C00B111 (251MB)
NXT-AL10C00B111 (1664MB)
NXT-AL10C00B111 (327MB)
NXT-AL10C00B112 (270MB)
NXT-AL10C00B112 (173MB)
NXT-AL10C00B112 (1643MB)
NXT-AL10C00B116 (73MB)
NXT-AL10C00B116 (1643MB)
NXT-AL10C00B121 (1662MB)
NXT-AL10C00B122 (146MB)
NXT-AL10C00B122 (1673MB)
NXT-AL10C00B122SP02 (1676MB)
NXT-AL10C00B123 (101MB)
NXT-AL10C00B123 (1667MB)
NXT-AL10C00B076SP02 (233MB)
NXT-AL10C00B122SP02 (64MB)
NXT-AL10C00B122SP04 (84MB)
NXT-AL10C00B122SP04 (1691MB)
NXT-AL10C00B128 (198MB)
NXT-AL10C00B128 (257MB)
NXT-AL10C00B129 (72MB)
NXT-AL10C00B122SP05 (96MB)
NXT-AL10C00B129 (257MB)
NXT-AL10C00B122SP06 (80MB)
NXT-AL10C00B122SP06 (1686MB)
NXT-AL10C00B131 (291MB)
NXT-AL10C00B129SP01 (76MB)
NXT-AL10C00B122SP07 (80MB)
NXT-AL10C00B131 (1674MB)
NXT-AL10C00B129SP02 (80MB)
NXT-AL10C00B129SP02 (1674MB)
NXT-AL10C00B122SP08 (73MB)
NXT-AL10C00B132 (123MB)
NXT-AL10C00B132 (307MB)
NXT-AL10C00B137 (73MB)
NXT-AL10C00B137SP02 (74MB)
NXT-AL10C00B137 (215MB)
NXT-AL10C00B137 (1674MB)
NXT-AL10C00B151 (261MB)
NXT-AL10C00B152 (215MB)
NXT-AL10C00B152 (178MB)
NXT-AL10C00B153 (178MB)
NXT-AL10C00B153 (73MB)
NXT-AL10C00B156 (78MB)
NXT-AL10C00B156 (178MB)
NXT-AL10C00B156 (1675MB)
NXT-AL10C00B163 (164MB)

Nice thread, thank you. Where did you get NXT-AL10C00B163 (164MB) ?
Is this the next OTA?
I have the Chinese 128 GB version, living in Italy, and yet didn't get this update.

nope, B163 seemed to be just an internal testing or beta version. current chinese firmware is B165, u should get it sometime in the near future via OTA (provided, of course, ure still all stock, i.e. no root, no unlocked bootloader, no custom recovery, etc.)

Hi, I am a HUAWEI MATE 8 user in China. I’ve seen from the XDA forum that you have the firmware version of Chinese MATE8 modle. Can you send me the file of NXT-AL10C00B116 (1643MB)?

I just received the b165 update. I haven't noticed anything different.

killuminati206 said:
I just received the b165 update. I haven't noticed anything different.
Click to expand...
Click to collapse
Do you know how to do the update when you have root?

ghfatw said:
Do you know how to do the update when you have root?
Click to expand...
Click to collapse
I'm curious about this too. I have ordered the Chinese version and plan on using the tool RayGlobe Italian Knife to switch to international rom, but I understand that if you do this you don't receive OTA so you have to flash each new software version manually. In the OTA thread each OTA file can be found but the problem is that it says that you can not be rooted when flashing it.
Sent from my NX507J using Tapatalk

If you have the right oeminfo, and it corresponds with the update, it will update manually, (hold vol up, vol down, power) dload folder .app file inside.

Still stuck on Android 6.01 with no OTA update

Had my A2017G for a few months, but still stuck on v1.0.0b06 with no available OTA updates.
Will I manually have to flash it to a android 7 version then will I be able to receive OTA?
Any guidance is much appreciated.

It really depends on where your device is from. That build may very well be the most up-to-date build released. Check the ZTE support site to be sure.
If you want to go to nougat right away, I'd suggest manually installing the German update zip / installing the leaked 7.1.1 B01 zip floating around. Afterwards, you'll receive the OTA prompt for the 7.1.1 B02 build.

Jacques101 said:
Had my A2017G for a few months, but still stuck on v1.0.0b06 with no available OTA updates.
Will I manually have to flash it to a android 7 version then will I be able to receive OTA?
Any guidance is much appreciated.
Click to expand...
Click to collapse
Yes, you need to download nougat image from ztedevices then push it to SD card and update to nougat will be available via system updater.

oleung4 said:
It really depends on where your device is from. That build may very well be the most up-to-date build released. Check the ZTE support site to be sure.
If you want to go to nougat right away, I'd suggest manually installing the German update zip / installing the leaked 7.1.1 B01 zip floating around. Afterwards, you'll receive the OTA prompt for the 7.1.1 B02 build.
Click to expand...
Click to collapse
I'm in the UK, and had no update since getting the handset.
So I won't need a build 10 to do the update to nougat?
Many thanks

Jacques101 said:
I'm in the UK, and had no update since getting the handset.
So I won't need a build 10 to do the update to nougat?
Many thanks
Click to expand...
Click to collapse
I forgot if it's required. But no harm in doing the updates incrementally. The German support page has the B10 update, as well as the 7.0 update. Then the 7.1.1 B01 leak can be found around here. These of course are all for the A2017G variant.
If you intend to unlock your bootloader, I'd suggest doing so before upgrading to nougat.

oleung4 said:
I forgot if it's required. But no harm in doing the updates incrementally. The German support page has the B10 update, as well as the 7.0 update. Then the 7.1.1 B01 leak can be found around here. These of course are all for the A2017G variant.
Click to expand...
Click to collapse
Thanks. I'll give that a try when I'm home. Is this becoming stuck on certain software versions common on the A7?
Also in hoping in the future OTA works normally. Apart from this, the phone is solid all-around.
Many thanks

I have one german version... live in argentina, and otas comes really fast... the same day that someone post some info here...
I manually update to 7.0, then manualy to 7.11 b1, then ota notifies me that b02 is relased, so manual update dont break otas...
I have a full stock phone, locked bl and nothing changed

pelelademadera said:
I manually update to 7.0, then manualy to 7.11 b1, then ota notifies me that b02 is relased, so manual update dont break otas...
I have a full stock phone, locked bl and nothing changed
Click to expand...
Click to collapse
Thanks for the piece of mind, I'll replicate your methodology and hope for the best.

Jacques101 said:
Thanks for the piece of mind, I'll replicate your methodology and hope for the best.
Click to expand...
Click to collapse
There is a full 7.1.1 B02 somewhere that you can also use. Just use the MiFlash flasher thing, it shouldn't go bad if you're using the stock flasher

Jacques101 said:
Thanks for the piece of mind, I'll replicate your methodology and hope for the best.
Click to expand...
Click to collapse
This is the full ota for V1.2.0B01: https://www.androidfilehost.com/?fid=457095661767151720
I'd suggest you manually update to V1.0.0B10 and then to V1.2.0B01.
You can find t he V1.0.0B10 on the ztemobile.de page: http://www.ztemobile.de/support/downloads/?product_id=2100 (Software Update B10)
I'd skip going to Nougat 7.0 first. Just upgrade directly to 7.1.1 with the full ota I posted.
Copy both of the files onto your sd card. They will then appear in the Updater (Settings -> Updates). Just run the upgrade from there.
Be aware! As previously stated by @oleung4 unlock your bootloader before upgrading. I unlocked mine on B06.

sToRm1nG said:
This is the full ota for V1.2.0B01: https://www.androidfilehost.com/?fid=457095661767151720
I'd suggest you manually update to V1.0.0B10 and then to V1.2.0B01.
You can find t he V1.0.0B10 on the ztemobile.de page: http://www.ztemobile.de/support/downloads/?product_id=2100 (Software Update B10)
I'd skip going to Nougat 7.0 first. Just upgrade directly to 7.1.1 with the full ota I posted.
Copy both of the files onto your sd card. They will then appear in the Updater (Settings -> Updates). Just run the upgrade from there.
Be aware! As previously stated by @oleung4 unlock your bootloader before upgrading. I unlocked mine on B06.
Click to expand...
Click to collapse
Thanks for your help, I'll update the thread in the next day or two about my progress.
Is the bootloader difficult to unlock past B06 in that case?

Jacques101 said:
Thanks for your help, I'll update the thread in the next day or two about my progress.
Is the bootloader difficult to unlock past B06 in that case?
Click to expand...
Click to collapse
It gets more complicated starting with (afaik) V1.0.0B11. If you want the easy way I'd suggest you do it before you upgrade past B10, I would even say do it before upgrading from B06.

Bootloader unlock
Jacques101 said:
Thanks for your help, I'll update the thread in the next day or two about my progress.
Is the bootloader difficult to unlock past B06 in that case?
Click to expand...
Click to collapse
I unlocked mine without too much problem from B08 using the windows 1.1.1 toolkit: https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108
I did get into a lot of trouble when I relocked it, so just avoid that.
Good luck

I've put the German image file on a USB and connected via an OTG cable, no joy......
I have V.1.0.0B11

If I were you I'll stuck with the latest marshmallow update. Nothing against nougat but MiFavor's version is sucks.

hollandnigel said:
I've put the German image file on a USB and connected via an OTG cable, no joy......
I have V.1.0.0B11
Click to expand...
Click to collapse
First: Check that you didn't put the zip with the buncha numbers. If you open the zip you should find an update.zip and a pdf or something, and you have to use the update.zip inside. NOT directly the one with the numbers!
Second: Your phone probably won't find the file on the OTG, if so just copy the file from the OTG to the root of the internal storage

Ah....
I unzipped it.....

Okay so still no joy, neither of the files would update
"System Update Failed"
Attached screenshots if anyone can help ??

hollandnigel said:
Okay so still no joy, neither of the files would update
"System Update Failed"
Attached screenshots if anyone can help ??
Click to expand...
Click to collapse
You almost brick the phone. Tell me a couple of things:
-What's the model? Turn it around and look below the Dolby Atmos symbol, it should be etched there. Either A2017 or G or U.
-I see that your software is of the A2017G. You probably have an A2017.
-What's the version that you downloaded? If it is for another version you can lose the IMEIs.

I have a similar issue. I have an A2017G. I had LOS on and am trying to go back to stock. I can get MM B10 or B11 to load, but N B01 won't flash within Android and if I force it from within recovery, the phone won't boot. anyone any smart ideas?

US Tablet User - Can I get to Nougat?

Hi all, I'm a US user with W09 and would like to get it to Nougat - I have read the entire "Update to EMUI 5.0" thread and there appeared to be several possible routes, but most were regarding the European version.
I have a US Wi-Fi model and have no allegiance in keeping it a US one, if there's a way to remove the regional aspect to gain access to the update (BETA or otherwise).
I would greatly appreciate if someone who has some experience with or is very confident of the correct path would shed some light for me.
Thank you!

Have you tried update via Firmware Finder? Witch firmware version do you have now?
Sent from my Nexus 6 using Tapatalk

33adi said:
Have you tried update via Firmware Finder? Witch firmware version do you have now?
Click to expand...
Click to collapse
I've just finished reading the entire thread linked above that mentions that method a number of times, so I'm certainly familiar with it, but haven't tried it because sprinkled throughout that thread are plenty of issues encountered. Also, there's no mention of US hardware/firmware specific instructions.
I'm on W09 as mentioned in the OP - thanks for the reply!

Install Firmware Finder from Playstore and post a screenshot with firmwares that appear there.
Sent from my Nexus 6 using Tapatalk

33adi said:
Install Firmware Finder from Playstore and post a screenshot with firmwares that appear there.
Click to expand...
Click to collapse
I'm away from my tablet at the moment but will do later on when I get home.

We will see after that what we can do. I have updated my tablet to Nougat, but I have BTV-DL09 (4G European version).
To change region I think you have to unlock bootloader.
Sent from my Nexus 6 using Tapatalk

33adi said:
We will see after that what we can do. I have updated my tablet to Nougat, but I have BTV-DL09 (4G European version).
To change region I think you have to unlock bootloader.
Click to expand...
Click to collapse
Here's what's in firmware finder @33adi

What's the advantage to switching from US to EU roms? I unlocked, rooted, enabled 5ghz band for wifi, and now only need nougurt but much like the original poster not sure the best route.
Sent from my BTV-W09 using Tapatalk

gaidin43 said:
What's the advantage to switching from US to EU roms? I unlocked, rooted, enabled 5ghz band for wifi, and now only need nougurt but much like the original poster not sure the best route.
Click to expand...
Click to collapse
The advantage of removing the US stock rom is that the European one has a beta available that is very stable. My thread is seeking someone who's confident of the steps to 1st going European & 2nd installing nougat once there, as there was some debate of complexity to doing even that.

I've been through exactly what you are wanting to do @dutchdoggs54 . Unfortunately I can't tell you step by step how I got to where I'm at.
I was on W09128BXXX out of the box . Read the topic that you have linked in your first post and decided to do it using firmware finder to force the update to Nougat as they described. It actually went very well and Nougat worked great with the exception of Bluetooth not working.
I have to say during the upgrade when it booted into recovery and it was TWRP I was concerned. Believe it had an error but it worked and replaced TWRP as I recall with a stock recovery.
So after all that I decided I wanted my tablet branded as a BTV-W09C100B006. Below is the topic where a member thought they bricked their tablet.
https://forum.xda-developers.com/mediapad-m3/how-to/bricked-m3-btv-w09-t3612699
They were given directions to download the Full update package for the version I just mentioned.
This member got their tablet working again and in the process found that 5Ghz wifi is enabled on C100B006 by default.
That was the main reason I rooted my tablet.
I followed the directions knowing I force install a different version of Nougat from your link.
Downloaded the full version software and dropped it in the dload folder on my US tablet and did the upgrade.
Tablet rebooted and shortly after it rebooted again going to recovery (I tried may times to boot). Don't recall the error but after I unlocked my bootloader again it reset the tablet and I was able to access it again. I did relock the bootloader so I can see updates without any problems after that.
In the end I got what I was after. My tablet shows as a BTV-W09C100B006 and can check for updates.
5Ghz wifi is enabled by default. As I said I relocked the bootloader so I'm not rooted. Overall it's works so well I'll wait for Nougat to get released and then do the official upgrade. After the scare of booting to recovery it was worth every nervous minute of it.

Try to talk to OP from this thread:
https://forum.xda-developers.com/p9/...-root-t3374068
Maybe he can make this app available to Mediapad M3, then changing OEMINFO will be easy.
I posted a question there.

No luck
Ok, so I tried following @Samavb's great instructions and guidance in the other thread last night. Made it all the way to the point where he says to install 009 from the Huawei website - got it downloaded and loaded up on the tablet only to find that it wouldn't install because the 009 file on the website is BTV-DL09 not the BTV-W09 version a US tablet would need.
So I got frustrated and tried installing the B301 build that appeared on firmware finder when I was on the W09-006 build...this was nougat and was cool but no keyboard and the play store wouldn't install anything, so I was forced to revert back to 006.
So, long story short, hours of work have confirmed that there doesn't appear to be a way to get a US tablet to fully functional Nougat at the moment. If there was a 009 or 010 build like Samavb mentions for the US model, maybe it would work, but those aren't anywhere to be found - firmware finder, russian site he mentions or otherwise.
So, I'll happily sit on 006 and wait for a US OTA update. That is unless anyone can tell me exactly how to make this US model into a European model.

Same boat as original poster. US w09 on build c128b003. Firmware finder just finds the same version. Anyone know when there might be a us version update released. I thought it was supposed to be may so have been waiting patiently.....but may is over.

dr_pepper said:
Same boat as original poster. US w09 on build c128b003. Firmware finder just finds the same version. Anyone know when there might be a us version update released. I thought it was supposed to be may so have been waiting patiently.....but may is over.
Click to expand...
Click to collapse
In Firmware Finder select the menu in the top left corner. (3 bars)
Right below your model number, select change model and enter BTV-W09C100 and then search.
You should see B301 and it's a full OTA. However, as I understand it this is just a beta/test release.
Only issue I had with it, bluetooth didn't work. Seeing as how I don't use it, didn't bother me.
I highly recommend you fall back to the other topic about forcing the upgrade to Nougat.
Only difference from my tablet and yours. I was on C128B002. I had already rooted and couldn't get that update.

Also US 64gb version here and hoping for an update to Nougat and EM5. Would love to see it!
Huawei have been quite attentive for updates in other markets which is great. Too bad the non-LTE version in US doesn't get the same love.
Buying this tablet was a roll of the dice for me, banking on the hope that Huawei would be attentive to software updates (for all markets) and custom ROMs could serve as back up/enjoyment. This tablet has solid hardware and with another launcher it is decent.
Sadly, my experiment to try out a non-Nexus device without the latest (or close to pure) Android version is coming to an end. The last M3 sold on Swappa went for around $300.

johninsf said:
Also US 64gb version here and hoping for an update to Nougat and EM5. Would love to see it!
Huawei have been quite attentive for updates in other markets which is great. Too bad the non-LTE version in US doesn't get the same love.
Buying this tablet was a roll of the dice for me, banking on the hope that Huawei would be attentive to software updates (for all markets) and custom ROMs could serve as back up/enjoyment. This tablet has solid hardware and with another launcher it is decent.
Sadly, my experiment to try out a non-Nexus device without the latest (or close to pure) Android version is coming to an end. The last M3 sold on Swappa went for around $300.
Click to expand...
Click to collapse
I just updated the firmware finder app and it now shows the full ota for nougat. It wasn't found until I updated the app.

purple lady said:
I just updated the firmware finder app and it now shows the full ota for nougat. It wasn't found until I updated the app.
Click to expand...
Click to collapse
Excellent and great news! Are you in the US and have the wifi only version?

johninsf said:
Excellent and great news! Are you in the US and have the wifi only version?
Click to expand...
Click to collapse
Yep.

Thanks Purple Lady!
Too anyone in this thread, I want to install the latest version available in Firmware Finder.
When I select download, I get 3 file choices. Which should I pick to download then what are the steps to update? Please point me to the best post to reference as there are a few.

johninsf said:
Thanks Purple Lady!
Too anyone in this thread, I want to install the latest version available in Firmware Finder.
When I select download, I get 3 file choices. Which should I pick to download then what are the steps to update? Please point me to the best post to reference as there are a few.
Click to expand...
Click to collapse
from what i gather. if you're going from MM to Nougat, you need to install the Full OTA. for that, there are 2 files, you will need both of them. from there, i'm not sure.

I have a few questions about updating my phone properly

Hello!
Disclaimer before I get scolded. I did search the forums and I read a lot of posts, I just feel like none answer my question specifically.
What I did: I used to run custom MiFavor ROM. I wanted to return stock and get the latest OTA, so using the Axon 7 Toolbox, I returned to stock using the: A2017G_B10_FULL_EDL.zip; this ROM refused to update, every time it would fine an OTA, but it failed to apply it in recovery.
I downloaded a system image from the ZTE website named: ZTE A2017GV1.2B05
When I try to search for updates, this one reports that it's "up to date"
My questions:
1. There was an update for the german version of A2017G. Will my romanian version ever get updated? How come some counties get updates while others do not since we don't depend on a carrier to approve the update?
2. Is it true that the G version will never be upgraded to android 8? I noticed some people said we will never get the MiFavor 5. Is it possible to get Oreo and stay on MIFavor 4.2?
3. I noticed a post today that the chinese version got upgraded to MiFavor 5.x/Android 8. Is there any way to convert my A2017G to chinese version for the sake of having all features?
PS As you might have noticed, I am a bit obsessed with having the latest version installed. Any tip/advice on what is the best course of action for me would be greatly appreciated.

G model will get Oreo just not in 2017 as Zte reps said they need to work on it more,
Android Oreo,it has proven buggy so they wanted to take more time work on it.
Updating is a hassle yes, you need certain type of update file, on certain types of rom updated on certain type of way.
but there are instructions for that so no worries.
thats all i can say
if this was helpfull in any way, smack that Thanks button :laugh:
Cheers!

German B08 is the latest Nougat for A2017G. You should be on at least B10 MM first, then put the zip on SD card, go to update in settings and it should show the update ready to go. Hit the button to flash it.
There is a newer B11 MM rom too. I think it can also be used to roll back to MM from N.

RobboW said:
German B08 is the latest Nougat for A2017G. You should be on at least B10 MM first, then put the zip on SD card, go to update in settings and it should show the update ready to go. Hit the button to flash it.
There is a newer B11 MM rom too. I think it can also be used to roll back to MM from N.
Click to expand...
Click to collapse
Any full zip is okay to roll back to M, the B11 zip has that name simply to differentiate from incremental OTAs and such stuff.
Plus B11 was only for Spain, didn't differ much from B10

H870ds taiwan updates?

Hi,
I cant find any news on the web if LG stopped update support for the h870ds from Taiwan or in general China? Only news i found they left china smartphone market.
At devtester there where only a few models included like V30 in taiwan with a security update this year.
http://devtester.ro/projects/lg-firmwares/#all-firmwares
I maybe want to flash CIS or INDIA on my G6 dual sim. Or any other advice of what rom is best for west-europe?

Bump
I second this question. I know there are quite a few threads about cross-flashing and similar stuff, but there are some things that are still not clear to me, even after reading these threads, so I decided to use this already existing thread to join in and ask more or less the same:
- is it safe to cross-flash regions? In my case I have TWN and thought about flashing India.
- Which region is most supported by LG? Looking at the firmware update history I would say India, can anyone confirm?
- Did anyone from Europe (in my case Germany) cross-flash and did any problems occur afterwards?
- will I still get OTAs after changing region if I'm in fact in another region?
Thanks for your help guys!
Cheers

I flashed India over SEA without data loss and everything is functioning normally. I used UPPERCUT for LGUP.

qwer23 said:
I second this question. I know there are quite a few threads about cross-flashing and similar stuff, but there are some things that are still not clear to me, even after reading these threads, so I decided to use this already existing thread to join in and ask more or less the same:
- is it safe to cross-flash regions? In my case I have TWN and thought about flashing India.
- Which region is most supported by LG? Looking at the firmware update history I would say India, can anyone confirm?
- Did anyone from Europe (in my case Germany) cross-flash and did any problems occur afterwards?
- will I still get OTAs after changing region if I'm in fact in another region?
Thanks for your help guys!
Cheers
Click to expand...
Click to collapse
I run the india SEA version over my TWN rom without problems .
I used lg back up first and afterwards i needed to restore because it will whipe all after flashing.
You can update with any 870ds region rom over a other 870 DS version. If you want to update you will have to do manual everytime with lg up. Its shows h87010v-global-com instead.
Sent from my LG-H870DS using XDA Labs

I can answer this one very easily. HD870DS is the variant which receives quite frequent (ignoring South Korean ones). I have an Indian variant and the security updates are quite frequent. In terms of security updates, LG has been doing a decent job here in India

I bought a TWN version and have manually flashed over to an Australian version, everything seems fine. The only thing I cannot confirm is if I will still receive any OTA updates or infact any via LG Bridge, as, surprisingly, no more updates have actually been released since I manually flashed.

Pondy said:
I bought a TWN version and have manually flashed over to an Australian version, everything seems fine. The only thing I cannot confirm is if I will still receive any OTA updates or infact any via LG Bridge, as, surprisingly, no more updates have actually been released since I manually flashed.
Click to expand...
Click to collapse
Hopefully soon you will able to test it out with Oreo

b0nebreaker said:
I flashed India over SEA without data loss and everything is functioning normally. I used UPPERCUT for LGUP.
Click to expand...
Click to collapse
Hi could you please let me know the steps and procedure.
I searched all over the forum's but no clear steps.
It will be really helpful if you can share it.
From,
A fellow SEA USER

Sathya241288 said:
Hi could you please let me know the steps and procedure.
I searched all over the forum's but no clear steps.
It will be really helpful if you can share it.
From,
A fellow SEA USER
Click to expand...
Click to collapse
Found this link
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you can find all h870ds flashable kdz files.
https://lg-firmwares.com/lg-h870ds-firmwares/
I flashed india SEA 10v.
Good luck
Sent from my LG-H870DS using XDA Labs

@Sathya241288 the procedure is pretty straightforward.
1) Download LGUP, Uppercut and H870DS kdz file that you want.
2) Connect phone to PC, double click Uppercut.exe (be vary, your antivirus may flag it as unsafe).
3) Choose Upgrade and choose location of the firmware file.
4) Start the flash.
@Don1003 provided you with everything you need.

Don1003 said:
Found this link
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you can find all h870ds flashable kdz files.
https://lg-firmwares.com/lg-h870ds-firmwares/
I flashed india SEA 10v.
Good luck
Click to expand...
Click to collapse
Thanks a lot .

I'm in Australia and I also have a Taiwanese H870DS.
Like others here, I've been disappointed by the lack of updates. I'm waiting to see if we get an Oreo update, if not I'll flash it as instructed in this thread.

G6 is not alone.The taiwan v30 last update was januari,it just got a update patch in april.
Sent from my LG-H870DS using XDA Labs

Don1003 said:
G6 is not alone.The taiwan v30 last update was januari,it just got a update patch in april.
Click to expand...
Click to collapse
It may be long for this model then.

i tried to ask LG ... this is the answer :
Dear Valued Customer,
Thank you for writing to LG!
Oreo updates for LGH870DS are in the pipeline but we do not have any news on the release date yet.
We apologise for any disappointment.
Thank you and have a nice day ahead!
Best regards,
LG Electronics Singapore Pte Ltd
Click to expand...
Click to collapse

This was their response to me:
Thank you for your valuable comments. We are sorry that we have not received any information about updated software. We will respond to relevant departments. If you need other services, you can call customer service center at service time or E-MAIL official website message
Click to expand...
Click to collapse

prix22 said:
Hopefully soon you will able to test it out with Oreo
Click to expand...
Click to collapse
Hi, which firmware did you use?

Finaly after 8 months after oktober patch I get 8.0 with may security patch tru lg bridge. Maybe the last update twn version get.
Sent from my LG-H870DS using XDA Labs

Sathya241288 said:
Thanks a lot .
Click to expand...
Click to collapse
I've just got an update to Oreo to SEA version, which was on Oct 2017 security patch. Just run LG Bridge and check for Updates!
Now version is V20a-SEA-XX

I recommend all TWN owners to follow the guide and discussion in this thread, so no need to continue here.