Related
Sammobile report a lot of new updates today for:
Malaysia --> https://drive.google.com/file/d/0ByGZ52Krjat1UmZyN0tOS1Z2LVE/edit?usp=sharing
Philippines
Philippines
Indonesia
Thailand
Philippines
Philippines (Globe)
Model: GT-N7100
Model name: GALAXY Note II
Country:...
Version: Android 4.4.2
Changelist: 2177951
Build date: Wed, 30 Jul 2014 10:25:09 +0000
Product Code: XTE
PDA: N7100XXUFNG4
CSC: N7100OLBFNG1
MODEM: N7100DXUFND2
if you guys wont my to upload any of them please give me a hint
Does any of those firmwares have polish (XEO) language in it?
Jatoskopie said:
Does any of those firmwares have polish (XEO) language in it?
Click to expand...
Click to collapse
No mate.
i loss my root after carry out the update and i cant reroot. can someone help me?
shan_pei said:
i loss my root after carry out the update and i cant reroot. can someone help me?
Click to expand...
Click to collapse
My favorite method is to flash custom recovery via ODIN, and then flash the latest Supersu.zip from recovery (you can restore stock recovery via MobilOdin later)
This works fine with N7100xxufng4.
robalm said:
My favorite method is to flash custom recovery via ODIN, and then flash the latest Supersu.zip from recovery (you can restore stock recovery via MobilOdin later)
This works fine with N7100xxufng4.
Click to expand...
Click to collapse
it is not working for me. the custom recovery keeps being overwrite by the stock one.
shan_pei said:
it is not working for me. the custom recovery keeps being overwrite by the stock one.
Click to expand...
Click to collapse
Uncheck auto reboot in odin while flashing custom recovery so once its done flashing,unplug the phone battery to turn off the phone,plug it back in after a minute and manually enter recovery mode by pressing volume up plus home plus power key and flash supersu zip via the recovery and then reboot your phone.Let it finish booting.Open supersu it'd ask you if you want to disable knox allow it and you are set.
singhpratik87 said:
Uncheck auto reboot in odin while flashing custom recovery so once its done flashing,unplug the phone battery to turn off the phone,plug it back in after a minute and manually enter recovery mode by pressing volume up plus home plus power key and flash supersu zip via the recovery and then reboot your phone.Let it finish booting.Open supersu it'd ask you if you want to disable knox allow it and you are set.
Click to expand...
Click to collapse
Thanks for your advice. I managed to reroot my phone finally! But I cannot flash the supersu and i have to install it via google play.
shan_pei said:
Thanks for your advice. I managed to reroot my phone finally! But I cannot flash the supersu and i have to install it via google play.
Click to expand...
Click to collapse
What do mean "CANNOT FLASH THE SUPERSU"? Not on your device? Doesn't work?
There is a major difference between flashing through recovery and installing from play store -> Root Persistence
stock deodexed version ?
rraaka said:
stock deodexed version ?
Click to expand...
Click to collapse
I will make one in a few hours (after work).
Androidwizzard said:
I will make one in a few hours (after work).
Click to expand...
Click to collapse
Can you check on bootloader if it's newer than NE2?
singhpratik87 said:
Can you check on bootloader if it's newer than NE2?
Click to expand...
Click to collapse
I will certainly do :good::highfive:
singhpratik87 said:
Can you check on bootloader if it's newer than NE2?
Click to expand...
Click to collapse
N7100XXUFNG4 :silly:
robalm said:
N7100XXUFNG4 :silly:
Click to expand...
Click to collapse
Presumably YES, and I will make it a *tar.md5 for everyone who wants.
Androidwizzard said:
Presumably YES, and I will make it a *tar.md5 for everyone who wants.
Click to expand...
Click to collapse
It is N7100XXUFNG4
robalm said:
N7100XXUFNG4 :silly:
Click to expand...
Click to collapse
Here it is :victory:
This latest fw has changelist 2177951
Anyone used it to give opinion?
Sent from my GT-N7100 using Tapatalk 2
ExtSD write seems to be slightly more restricted but used fix in platform.xml still works.
Strange: After checking my stock rom it turned out to be from Philipines, but downloaded provided zip .....
I decided to flash back to stock in odin, it gets about 90% through the flash and fails and now when i turn my phone on it tells me to recovery my note 4 via Kies. Anyone help (N910F)
it says after the flash,
volume size is to big 81920 < 47104
odin : invaild ext4 image
ant78 said:
volume size is to big 81920 < 47104
odin : invaild ext4 image
Click to expand...
Click to collapse
Try firmware initialization under tools in Kies. You will probably get a pop up saying your phone is not compatible just close that out and hit tools, firmware initialization, then follow the instructions Kies gives you.
CodeNameRedNeck said:
Try firmware initialization under tools in Kies. You will probably get a pop up saying your phone is not compatible just close that out and hit tools, firmware initialization, then follow the instructions Kies gives you.
Click to expand...
Click to collapse
OK thanks, did as you suggested , kies downloads and decompresses the firmware but then kies just sticks o 0% and does nothing?
ant78 said:
OK thanks, did as you suggested , kies downloads and decompresses the firmware but then kies just sticks o 0% and does nothing?
Click to expand...
Click to collapse
I get a message saying the device cant connect to my pc.
beginning to wish i wouldnt of bothered rooting and installing a rom now :crying:
ant78 said:
OK thanks, did as you suggested , kies downloads and decompresses the firmware but then kies just sticks o 0% and does nothing?
Click to expand...
Click to collapse
Well that stinks. Maybe another firmware for the F version or maybe as I have heard others say they need a new pit file but that is dangerous stuff there and shouldn't be messed with unless really necessary and I don't know where you could find one. Good luck.
I'm not sure, but i think you're on a newer bootloader and you flash back to an older firmware
so far as i know you can't downgrade!
Try searching newer stock firmware and try again!
Regards
Sonic76
sonic76 said:
I'm not sure, but i think you're on a newer bootloader and you flash back to an older firmware
so far as i know you can't downgrade!
Try searching newer stock firmware and try again!
Regards
Sonic76
Click to expand...
Click to collapse
I think you might be right, i flashed the newer bootloader and modem with the XNOTE rom, Where do i find the newer stock firmware?
You can look @ sammobile or ask google!...from where (location) is your old Firmware?
Regards
Sonic76
sonic76 said:
You can look @ sammobile or ask google!...from where (location) is your old Firmware?
Regards
Sonic76
Click to expand...
Click to collapse
i tried samobile, its the version i all ready tried :crying:
ant78 said:
i tried samobile, its the version i all ready tried :crying:
Click to expand...
Click to collapse
My firmware is BTU (UK)
ant78 said:
My firmware is BTU (UK)
Click to expand...
Click to collapse
Check your P.M! ....or flash other newer stock Firmware.
...maybe there's no newer UK Firmware at the moment
Sonic76
Hey guys ! finally official lollipop update released for SM-P900 and SM-901 !!
SM-P900 :
Region : Netherlands
PDA: P900XXU0BOF2
CSC: P900OXA0BOF2
CHANGELIST: 5043235
BUILD DATE: 05.06.2015
Link : http://samsung-updates.com/details/48100/Galaxy_Note_PRO_12.2_WiFi/SM-P900/PHN/P900XXU0BOF2.html
--------------------------
SM-P901 :
Region : Russia
PDA: P901XXU0BOF2
CSC: P901OXE0BOF2
CHANGELIST: 5043235
BUILD DATE: 05.06.2015
Link : http://samsung-updates.com/details/48092/Galaxy_Note_PRO_12.2_3G/SM-P901/SER/P901XXU0BOF2.html
Happy Flashing !!:highfive:
At least the ROM's can be ported to the SM-P601 and SM-P600 in which they share a common processor: Exynos 5420
If you install this on a US P900 what will the differences be?
5.0.2? or 5.1
5.02
I just purchased a 900 model off ebay, along with a Logitech folio keyboard, for around 430 bucks. It isn't here yet... I'm moving from an Asus TF700 (great little tablet but only 1g of memory limits it). How long is the usual wait for a new Samsung update to a tablet to makes its way from the Netherlands (?!) to the USA? Not exactly, of course, but any educated guesses?
shonkin said:
I just purchased a 900 model off ebay, along with a Logitech folio keyboard, for around 430 bucks. It isn't here yet... I'm moving from an Asus TF700 (great little tablet but only 1g of memory limits it). How long is the usual wait for a new Samsung update to a tablet to makes its way from the Netherlands (?!) to the USA? Not exactly, of course, but any educated guesses?
Click to expand...
Click to collapse
No way to tell with Samsung. You can odin flash this and set language to US English with no problems. Mine is booting up with it now.
A noob question maybe, if I flash this image with Odin will that be like an OTA upgrade or actually do a clean install of 5.0.2? (I'm kind of eager to upgade )
Tonv said:
A noob question maybe, if I flash this image with Odin will that be like an OTA upgrade or actually do a clean install of 5.0.2? (I'm kind of eager to upgade )
Click to expand...
Click to collapse
Odin flashing this does not wipe(you may have serious issues if you do not wipe before the odin flash since you are upgrading from KitKat). I wiped then installed this via Odin. I then Odin flashed the newest TWRP and flashed SuperSU in TWRP to get root. I finished the initial setup and am now letting it reinstall all the apps I wanted. Odin flashing TWRP was a pain because if you cannot immediately boot in to TWRP after the Odin flash it will not take. It took me a few tries to make it work but it will work.
nrage23 said:
Odin flashing this does not wipe(you may have serious issues if you do not wipe before the odin flash since you are upgrading from KitKat). I wiped then installed this via Odin. I then Odin flashed the newest TWRP and flashed SuperSU in TWRP to get root. I finished the initial setup and am now letting it reinstall all the apps I wanted. Odin flashing TWRP was a pain because if you cannot immediately boot in to TWRP after the Odin flash it will not take. It took me a few tries to make it work but it will work.
Click to expand...
Click to collapse
Thanks, I'll go for that! Good to hear that rooting is still possible with 5.0.2
Do you have fast down load you can share?
My tablet is flying after the 965mb ota update. Nice work Sammy
Sent from my SM-P900 using Tapatalk
Cannot get it to boot. The display stays blank after reboot. Will try again tomorrow.
Anyone have a copy of the 5.01 file they can share
If someone already have it please reupload it, i started the download 1 hour ago and it's only been downloaded 79 MB
So...can someone help me and upload the P901 lollipop rom to google drive !!
ppzoid said:
Cannot get it to boot. The display stays blank after reboot. Will try again tomorrow.
Click to expand...
Click to collapse
I too had this problem this morning.
I think my issue was using the wrong version of Odin to start with.
I tried again with Odin v3.06 and it worked fine.
Not tried rooting it again yet as the only reason I had for rooting in KitKat was to get all apps to have right access to the external SD. But Lollipop gives back the access
Can someone pleaseeeeeeee be kind enough to reupload the file to google drive? I'm getting sick of these file sharing sites.
BadAzDB said:
Can someone pleaseeeeeeee be kind enough to reupload the file to google drive? I'm getting sick of these file sharing sites.
Click to expand...
Click to collapse
i'm starting to upload the P900 file, if you want to wait for it
Edit: LOL! Forget about it, the file it's damaged.... :'(
ZascuashFua said:
i'm starting to upload the P900 file, if you want to wait for it
Click to expand...
Click to collapse
Thank you!!!! Yes I'll gladly wait for it!!
Sent from my SM-P900 using Tapatalk
Hi all,
I am starting a new post as I could not post in the
[ROM](5.1.1 TouchWiz)Tazzy-aurora-Note3-Full note 5 port Stable T-6.1 (19-1-2016)
area, being new and all.
So I flashed:
1. Kernel_Cleaning_AudaxL_v2.9
2. [5.1.1]Tazzy-aurora.Note3.Full.Note5.Port.T-6.1.zip
and now my phone is not registering on the mobile network.
PLEASE HELP!!
Upon restarting I get a message at the top of Samsung screen logo in Red:
kernel is not SEANDROID enforcing.
Thanks
B.
Flash a stock firmware using odin. Try that, but you will lose everything.
MrHollywood said:
Flash a stock firmware using odin. Try that, but you will lose everything.
Click to expand...
Click to collapse
Which firmware? The same .zip file I used earlier?
Can you give link?
Thanks
B
babak.sufi said:
Which firmware? The same .zip file I used earlier?
Can you give link?
Thanks
B
Click to expand...
Click to collapse
I have used CWM recovery 6.0.4.7 to wipe and flash.
Try to flash the latest Modem and Bootloader with Odin, I think you can find them on Audax page. Good Luck!
Fatal4u said:
Try to flash the latest Modem and Bootloader with Odin, I think you can find them on Audax page. Good Luck!
Click to expand...
Click to collapse
And where is that please?
http://forum.xda-developers.com/galaxy-note-3/development/rom-n9005-audax-v9-0-t2847013
in the first post:
MODEM/BOOTLOADER LOLLIPOP Section
- - - Install with ODIN 3.09 - - - Turn off the phone and go in Download Mode
- MODEM/NON-HLOS in CP=MODEM_NON-HLOS_OJ2
- BOOTLOADER in BL=BL_N9005XXUGBOL3
- PERSIST in AP=PERSIST_LP_N9005
babak.sufi said:
Which firmware? The same .zip file I used earlier?
Can you give link?
Thanks
B
Click to expand...
Click to collapse
No, go to Samsung updates.com or Sam Mobile and download a firmware for your phone. Firmware is an orginal "rom" for your device From Samsung, and flash it using odin. Your problem could be with the efs files, I had that issue Too with my note 3, you should always back up Your efs files.
Goodluck!
The rom on the phone is probably not compatible with the phone's current modem and or bootloader.
I recommend flashing the latest stock rom via Odin, make sur everything works, then install twrp and a custom rom.
MrHollywood said:
Flash a stock firmware using odin. Try that, but you will lose everything.
Click to expand...
Click to collapse
After flashing an update from Sammobile via Odin you won't lose anything!
Sent from my SM-N9005 using Tapatalk
saszseb said:
After flashing an update from Sammobile via Odin you won't lose anything!
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I know, I meant root and recovery.
MrHollywood said:
I know, I meant root and recovery.
Click to expand...
Click to collapse
Hi all,
Thanks for the tips.
I got 5.0 from Sammobile and flashed using Odin.
Cheers
babak.sufi said:
Hi all,
Thanks for the tips.
I got 5.0 from Sammobile and flashed using Odin.
Cheers
Click to expand...
Click to collapse
Congratulations! BTW a new Firmware has been released today in Israel.
Hi
Which firmware 5.0.1?
I downloaded a SM-J500FN firmware for lollipop and I get a winrar file.I tried to extract it and while extracting i show me "Arhive corrupted" it finished extracting but is it good now , Can I Downgrade to Lollipop whit that ? Pls help!
Download it again just to be sure
Ragazzza said:
Download it again just to be sure
Click to expand...
Click to collapse
I did , I downloaded other version too.. It apears again..
Download firmware from trusted sources like sammobile.
They should just give you .tar files which can be flashed via Odin
[email protected]@!3Z said:
Download firmware from trusted sources like sammobile.
They should just give you .tar files which can be flashed via Odin
Click to expand...
Click to collapse
Idk why but Sammobile isnt working for me , When I click on firmware I want I cant download it I mean the Download button is grey and I cant click on it..
Rnder said:
Idk why but Sammobile isnt working for me , When I click on firmware I want I cant download it I mean the Download button is grey and I cant click on it..
Click to expand...
Click to collapse
Try http://fw.updato.com/
[email protected]@!3Z said:
Try http://fw.updato.com/
Click to expand...
Click to collapse
I downloaded it from that site. I get winrar file, While extracting "arhive corrupted" comes , but it extracts at the end.
Rnder said:
I downloaded it from that site. I get winrar file, While extracting "arhive corrupted" comes , but it extracts at the end.
Click to expand...
Click to collapse
Try to download other firmware. Maybe it was uploaded corrupted.
#Henkate said:
Try to download other firmware. Maybe it was uploaded corrupted.
Click to expand...
Click to collapse
I did . I downloaded 2 versions of it , Same problem on both
Rnder said:
I did . I downloaded 2 versions of it , Same problem on both
Click to expand...
Click to collapse
Try SamFirm program and see if there's any problem. I used updato once and didn't have any problems and I've used the program like 5-6 times before, without any problems neither.
You can also try to flash the file it extract. If it is really corrupted, the Odin flash should fail.
#Henkate said:
Try SamFirm program and see if there's any problem. I used updato once and didn't have any problems and I've used the program like 5-6 times before, without any problems neither.
You can also try to flash the file it extract. If it is really corrupted, the Odin flash should fail.
Click to expand...
Click to collapse
I`ll now try SamFirm and see hat am I on about
#Henkate said:
Try SamFirm program and see if there's any problem. I used updato once and didn't have any problems and I've used the program like 5-6 times before, without any problems neither.
You can also try to flash the file it extract. If it is really corrupted, the Odin flash should fail.
Click to expand...
Click to collapse
The region thing what do I type there ? ( in SamFirm program) ( I am looking for Lollipop)
Rnder said:
The region thing what do I type there ? ( in SamFirm program) ( I am looking for Lollipop)
Click to expand...
Click to collapse
On sammobile / updato, you see the regions there, like SEB, DBT, ROM etc.
This is what you must type in SamFirm.
#Henkate said:
On sammobile / updato, you see the regions there, like SEB, DBT, ROM etc.
This is what you must type in SamFirm.
Click to expand...
Click to collapse
And how I know is it 5.1.1 ?
Rnder said:
And how I know is it 5.1.1 ?
Click to expand...
Click to collapse
You'll see the android version once you check for firmware.
You can also fill the PDA and the others with the ones from a firmware 5.1.1 which you want.
Maybe this video will help you: https://m.youtube.com/watch?v=27CndpB1EI0 .
#Henkate said:
You'll see the android version once you check for firmware.
You can also fill the PDA and the others with the ones from a firmware 5.1.1 which you want.
Maybe this video will help you: https://m.youtube.com/watch?v=27CndpB1EI0 .
Click to expand...
Click to collapse
Ok I`ll try.
#Henkate said:
You'll see the android version once you check for firmware.
You can also fill the PDA and the others with the ones from a firmware 5.1.1 which you want.
Maybe this video will help you: https://m.youtube.com/watch?v=27CndpB1EI0 .
Click to expand...
Click to collapse
I typed all what it says on 5.1.1 firmware and the program showes me a 6.0.1 version.. ( Tried with all ones)