Hi everyone,
Yesterday I upgraded my N4 to Lollipop and everything went well, except for the fact that I only have EDGE mobile data connection and not 3G.
I tried several things:
- Used other modems from Kitkat and hibrids
- Re-flashed everything (Lollipop)
And the result was the same: NO 3G (H) available, only E (Edge). I ended up soft braking the phone so I used NRT to do a full clean install and re-installed 5.0 from stock (still no 3G, off course).
Does anyone experienced this? Any pointers as to what might be going on?
Help will be appreciated.
Regards,
Mauricio
Maybe check preffered network in settings or flash a custom kernel, since you have tried pretty much everything
MauricioJancic said:
Hi everyone,
Yesterday I upgraded my N4 to Lollipop and everything went well, except for the fact that I only have EDGE mobile data connection and not 3G.
I tried several things:
- Used other modems from Kitkat and hibrids
- Re-flashed everything (Lollipop)
And the result was the same: NO 3G (H) available, only E (Edge). I ended up soft braking the phone so I used NRT to do a full clean install and re-installed 5.0 from stock (still no 3G, off course).
Does anyone experienced this? Any pointers as to what might be going on?
Help will be appreciated.
Regards,
Mauricio
Click to expand...
Click to collapse
Thats weird. Have you checked with your network settings as below?
View attachment 3028089
Jz Chong said:
Thats weird. Have you checked with your network settings as below?
View attachment 3028089
Click to expand...
Click to collapse
Yeap, I checked that. Thanks!
I now went back to Kitkat stock and still the same. It might be the network, but my wife's phone is working on 3G.
I'm gonna keep trying
Mauricio
It was indeed a network issue, sorry !
I called the company and it was solved in 10 sec with a "line reset".
Regards,
Mauricio
First off I would not recommend buying this phone, it has no features to STOCK ROM you cannot even display the battery percent or AM/PM indicator in status bar and it's already on 5.1.1 android. On top of all the downsides it comes with bloatware! I switch from a Galaxy S3 non-waterproof phone that ran official CDMA CM12.1 I'm already thinking on switching back to outdated phone.
This Virgin Mobile CDMA device allows for a successful bootloader unlock from Motorola website. Good Luck they say!?!
WARNINGS:
I uploaded to the official (osprey cm12.1) CyanogenMod ROM doing so wiped/broke the authentication to the virgin mobile network my SIM card went bad. Virgin Mobile is sending out a new account card so I can get back onto thier network and use all features again or sell phone!!
It's sad that so many people have this phone on Sprint plans and Virgin Mobile (CDMA LTE networks) and this device will probably be a phone that never gets an official CyanogenMod custom ROM for....
This phone did have a lot of awesome features using official CyanogenMod 12.1 for GSM on WiFi only, it allowed no bloatware it also allowed battery percent and and AM/PM indicators to show in status bar along with the fact when you hold the power button it let you go into airplane mode restart or power off the STOCK ROM only allows for power down no restart very cheap features poorly built STOCK ROM.
Good luck to all that buys this phone hoping a official CyanogenMod ROM will be built for CDMA version but I'm not counting my chickens before they decide to build one!
For developers: For some reason the official osprey GSM CM12.1 ROM messes up the SIM Virgin/Sprint card in this device it seems to change the PRL that currently is updated to a different number also changes my up to date mobile number in SIM status to the wrong phone number which sets my voice service out of data!
Thanks for reading device problems/reviews for 3rd generation Moto G (2015) for Virgin Mobile.
Dang dude, sorry for your frustration...
It can work though
http://forum.xda-developers.com/showthread.php?p=63863905
[ROM][osprey] CyanogenMod 12.1 for Moto G (3rd Gen)
http://forum.xda-developers.com/showthread.php?p=64104373
[ROM][osprey] CyanogenMod 12.1 for Moto G (3rd Gen)
The only thing that correctly works is a CDMA rom not GSM. The reason for SIM replacement is because I had to keep going back to my old PRL and profile update on backup ROM because the osprey ROM was changing my number and PRL on device. I tried so many times it's not even cool to think about the worst part is CM12.1 for SPH-L710 was so easy to get working and even though it said Sprint in top corner everything always worked you we;re just able to flash the universal LTE Fix and the name would change to Virgin Mobile.
Trust me I think I had to advance wipe wipe wipe install instal install mount mount mount reboot optimizing atleast 50 times go back to stock ROM PRL and phone number changed to a 0000003534 number I tried rooting and so many things including the universel apn fix but the only thing that would change is service to name to Virgin Mobile but then after a single reboot it would change it to Sprint name
Ok
hossman said:
Ok
Click to expand...
Click to collapse
How do I flash the derp3 file?
I just tried with fastboot named it boot.img flashed it then installed cm12.1 osprey and gapps then mounted system then virgin mobile APN Universal fix rebooted I'm not getting options for CDMA Subscription phone number is all out of wack in IMEI
Am I suppose to flash derp3 after I install CM and Gapps plus APN fix phone says Virgin In menu LTE but no calling due to number being incorrect in IMEI.
brandan278 said:
How do I flash the derp3 file?
I just tried with fastboot named it boot.img flashed it then installed cm12.1 osprey and gapps then mounted system then virgin mobile APN Universal fix rebooted I'm not getting options for CDMA Subscription phone number is all out of wack in IMEI
Am I suppose to flash derp3 after I install CM and Gapps plus APN fix phone says Virgin In menu LTE but no calling due to number being incorrect in IMEI.
Click to expand...
Click to collapse
Flash the derp3 after ROM and gapps
Then when you reboot you will find CDMA subscription option.
hossman said:
Flash the derp3 after ROM and gapps
Then when you reboot you will find CDMA subscription option.
Click to expand...
Click to collapse
I got it working but it displays sprint I did cm12.1 osprey + gapps then mount system Virgin APN then power down then booted back into bootloader flashed boot.img renamed from derp3 file then restart device for first time it all looks flawless with virgin in top of corner but then I go to change CDMA out of VM reboot device it starts up with Sprint LTE icon in status everything seems to be working after a restart from changing CDMA other than it doesn't display Virgin Mobile LTE
So everything works great IMEI and my real phone number and all status work just at network it says Sprint
RE
hossman said:
Flash the derp3 after ROM and gapps
Then when you reboot you will find CDMA subscription option.
Click to expand...
Click to collapse
I got voice data and sms working but I cannot send mms messages they just say sending something must still need work?
On cm12.1 I had to use textra to get MMS working...
Cm13 and AOSP 6.0 the native messaging app seems to work fine though.
I just flashed the updated AOSP6 ROM and gapps then mount system and flash APN fix and all is working so far..
---------- Post added at 09:02 AM ---------- Previous post was at 09:01 AM ----------
AOSP rom
http://forum.xda-developers.com/showthread.php?t=3229378
[WIP][Alpha]CAF-6.0 [Osprey]
hossman said:
On cm12.1 I had to use textra to get MMS working...
Cm13 and AOSP 6.0 the native messaging app seems to work fine though.
I just flashed the updated AOSP6 ROM and gapps then mount system and flash APN fix and all is working so far..
---------- Post added at 09:02 AM ---------- Previous post was at 09:01 AM ----------
AOSP rom
http://forum.xda-developers.com/showthread.php?t=3229378
[WIP][Alpha]CAF-6.0 [Osprey]
Click to expand...
Click to collapse
I'm going to stick with the CM12.1 snapshot as everything seems to run and work correctly just no mms that's all the work it needed it would be a rock solid rom if someone fix that
hossman said:
On cm12.1 I had to use textra to get MMS working...
Cm13 and AOSP 6.0 the native messaging app seems to work fine though.
I just flashed the updated AOSP6 ROM and gapps then mount system and flash APN fix and all is working so far..
---------- Post added at 09:02 AM ---------- Previous post was at 09:01 AM ----------
AOSP rom
http://forum.xda-developers.com/showthread.php?t=3229378
[WIP][Alpha]CAF-6.0 [Osprey]
Click to expand...
Click to collapse
Thanks hoss. Did not realize I could use Textra to get MMS. Was almost gonna go back to stock for this. Your always so helpful.
Edit: Im wondering can I only send MMS via 3g and LTE. I ask because I use to be able to send via WiFi but I can't even with Textra. I don't pay for data.
Edit2: I had to enable the WiFi only option. Yayyyy, glad I have picture messaging on CM. Thanks Hoss
Sent from my Virgin Mobile CDMA Moto G3
Hedied4me said:
Thanks hoss. Did not realize I could use Textra to get MMS. Was almost gonna go back to stock for this. Your always so helpful.
Edit: Im wondering can I only send MMS via 3g and LTE. I ask because I use to be able to send via WiFi but I can't even with Textra. I don't pay for data.
Edit2: I had to enable the WiFi only option. Yayyyy, glad I have picture messaging on CM. Thanks Hoss
Sent from my Virgin Mobile CDMA Moto G3
Click to expand...
Click to collapse
Textra doesn't work seems the Derp3 file is still a little off textra sends them but when standing next to the person sending to they never receive the file to get mms to send you have to push send then hit airplane mode then take out it will send automatically. Do this for every mms that your sending I have not tested with receiving this is for native app no others needed.
brandan278 said:
Textra doesn't work seems the Derp3 file is still a little off textra sends them but when standing next to the person sending to they never receive the file to get mms to send you have to push send then hit airplane mode then take out it will send automatically. Do this for every mms that your sending I have not tested with receiving this is for native app no others needed.
Click to expand...
Click to collapse
Go into Textra settings, then MMS, scroll to the bottom and the second option from the bottom is called "Prefer WiFi". Turn that on and you will be able to at least send MMS via Wifi.
Sent from my Virgin Mobile CDMA Moto G3
Hedied4me said:
Thanks hoss. Did not realize I could use Textra to get MMS. Was almost gonna go back to stock for this. Your always so helpful.
Edit: Im wondering can I only send MMS via 3g and LTE. I ask because I use to be able to send via WiFi but I can't even with Textra. I don't pay for data.
Edit2: I had to enable the WiFi only option. Yayyyy, glad I have picture messaging on CM. Thanks Hoss
Sent from my Virgin Mobile CDMA Moto G3
Click to expand...
Click to collapse
I'm currently running CM13 marshmellow rock solid firm everything works including facebook send mms calls and even says virgin mobile at top of menu even after SIM removed and reinserted always comes back to service everytime BIG thanks for such a stable build Alberto97
brandan278 said:
I'm currently running CM13 marshmellow rock solid firm everything works including facebook send mms calls and even says virgin mobile at top of menu even after SIM removed and reinserted always comes back to service everytime BIG thanks for such a stable build Alberto97
Click to expand...
Click to collapse
what all did you have to do to get it working i cant get data working
PRL?
Hey guys, just installed CM14.1 on my Moto G3. I am trying to use Textnow for service, through sprint. If I use a stock Rom I can get the PRL to update, but it doesn't stick when I flash CM14.1. I've done this successfully to another phone, exact same model, but cant get mine to keep the prl info.
Just to provide confirmed information and insight, flashing a custom OS will not and cannot "break" or otherwise cause damage or corruption to the UICC (SIM). While a custom OS can certainly break data, due to APN configurations, telephony & network settings, etc., I know of no custom ROM that writes to the UICC. For this very reason, it is often required for subscribers to revert to pure stock in the event that a PRL/Data Profile Update is needed. Also known as UICC Provisioning, stock firmware's update to the PRL and Data Profile writes to the UICC and enables data and voice services.
Hi, so I have a Canadian Samsung Galaxy S4 SGH-I337M.
I recently flashed Synergy's Cyanogenmod 13 that would allow me to run marshmallow as they have discontinued for my model on the official Cyanogenmod site. After I flashed Gapps Pico and everything was working fine until I tried to use mobile data...
I tried everything I could find i.e Airplane mode, DNS Changer, VPN and most notably changing APN's. As for when I changed APN's I am with mobilicity so I just changed the APN to wap.davewireless.com as instructed on their site but didn't work. I thought it was because "Synergy's CM13" might be "sketchy" so I also flashed CM11 made for my model off cyanogen's official site as well as Resurrection Remix still didn't fix the problem. Is there anything I can do to access my mobile data.
BTW: I can receive calls, texts, voicemails literally everything but my data. I can also receive texts from mobilicty about billing if that means anything.
Plz Help and Thanks
The phone is running the latest bootloader and modem? Data works on a stock ROM?
audit13 said:
The phone is running the latest bootloader and modem? Data works on a stock ROM?
Click to expand...
Click to collapse
thanks but its fine lol I fixed it self but yea the data works on stock
Hey guys! I got my note 4 today. It is used.
It came at 4.4.4 android version and rooted. So i installed TWRP and flashed BLISS Rom.
But right after i dial any number, i got "call ended", i cant receive calls and sms too.
I already tried another SIM card, but the problem persist.
I also updated the bootloader and the modem to the 6.0.1 version from the ditto note 5 rom topic.
What else can I do to make it work ?
Did i got and defective phone ?
Is the SIM card you are using only works under 4G area? Or does it support 2G/GSM as well?
Try reinstalling the stock firmware and see if that helps. But don't root it this time.
Yes, it supports 4g. And i already tried the stock rom, but with no results... What can i do ? D:
APN settings correct for your carrier?
nexus 4 mako mobile data not working. wifi and call sms work properly.
plz help
Why flash a ROM that is no more supported? There are lots of stable Nougat ROMs around, flash any one of them.
Nitin
i just flash to check marshmallow update
my vodafone 2g or 3g not work , airtel only 2 g work . tell me some stable rom to work my mobile data , any process to how reinstall modem in chroma rom..
Make sure you have latest modem installed 1.07 and also make sure apn settings are correct
It's not a rom issue, i used chroma MM for long time. Airtel 3g used to work fine. Just recheck all your network settings.
Ps: As the poster above me said check your apn settings, reset to default if it helps.