Related
I'm with Bell (Canada.) I was hesitant to root this device as it's a pretty significant investment, but I have rooted my original note with few issues, so I figured it should work as long as I follow every step carefully. Well unfortunately, upon first trying to root it, apps would start updating right at bootup, and SuperSU continuously crashed. So I decided I was just going to restore it to my original state and be done with it for now. Nope. Once I did this, the phone would just enter a boot cycle. (How does restoring my backup place me into a boot cycle?)
The only SM-N900W8 firmware downloads I can find are for south american regions... I have tried one of them and it failed to install. I am a bit panicked at the moment. Is there some crucial step I'm missing here?
Apra24 said:
I'm with Bell (Canada.) I was hesitant to root this device as it's a pretty significant investment, but I have rooted my original note with few issues, so I figured it should work as long as I follow every step carefully. Well unfortunately, upon first trying to root it, apps would start updating right at bootup, and SuperSU continuously crashed. So I decided I was just going to restore it to my original state and be done with it for now. Nope. Once I did this, the phone would just enter a boot cycle. (How does restoring my backup place me into a boot cycle?)
The only SM-N900W8 firmware downloads I can find are for south american regions... I have tried one of them and it failed to install. I am a bit panicked at the moment. Is there some crucial step I'm missing here?
Click to expand...
Click to collapse
have the same issue a man on xda helped me to get a nandroodmfrom is phone now my phone boot but no network cause i force flash the south america modem, and i have error msg. process system in not reponding and it boot. do u have an errormmsg too?
Yorgo1982 said:
have the same issue a man on xda helped me to get a nandroodmfrom is phone now my phone boot but no network cause i force flash the south america modem, and i have error msg. process system in not reponding and it boot. do u have an errormmsg too?
Click to expand...
Click to collapse
I got an error message trying to flash a SAM firmware. It would just say FAILED in red letters. I'm going to try the Mexico one next, and hopefully it will work. I'm hoping someone could upload a working backup from their phone.
Apra24 said:
I got an error message trying to flash a SAM firmware. It would just say FAILED in red letters. I'm going to try the Mexico one next, and hopefully it will work. I'm hoping someone could upload a working backup from their phone.
Click to expand...
Click to collapse
wait sammobile if u r with rogers bell telus fido vmc koodo, and if with other carrier contact them with ur phone model and serial num so they will upload it ..
Apra24 said:
I'm with Bell (Canada.) I was hesitant to root this device as it's a pretty significant investment, but I have rooted my original note with few issues, so I figured it should work as long as I follow every step carefully. Well unfortunately, upon first trying to root it, apps would start updating right at bootup, and SuperSU continuously crashed. So I decided I was just going to restore it to my original state and be done with it for now. Nope. Once I did this, the phone would just enter a boot cycle. (How does restoring my backup place me into a boot cycle?)
The only SM-N900W8 firmware downloads I can find are for south american regions... I have tried one of them and it failed to install. I am a bit panicked at the moment. Is there some crucial step I'm missing here?
Click to expand...
Click to collapse
Did you restore from CWM/TWRP?
Pikezer1337 said:
Did you restore from CWM/TWRP?
Click to expand...
Click to collapse
TRWP. I'm in the process of uploading a zip of my backup through hotfile, if anyone else who is having the same problem would want to try it out..
Apra24 said:
TRWP. I'm in the process of uploading a zip of my backup through hotfile, if anyone else who is having the same problem would want to try it out..
Click to expand...
Click to collapse
If you restored through TWRP there is a good chance that you are softbricked. There are restoring issues that mess with the system partition.
Update: I was able to flash the tar file from inside the zip of mexican firmware through odin (I was trying to install the zip through TWRM before... perhaps you need to install stock firmwares through odin? It's been a while.)
It's not rooted, and the icons are all different looking... but it's back in working condition
Apra24 said:
Update: I was able to flash the tar file from inside the zip of mexican firmware through odin (I was trying to install the zip through TWRM before... perhaps you need to install stock firmwares through odin? It's been a while.)
It's not rooted, and the icons are all different looking... but it's back in working condition
Click to expand...
Click to collapse
can u give the file name?
plz
Yorgo1982 said:
can u give the file name?
plz
Click to expand...
Click to collapse
I am using the TCE (Mexican) firmware from this link (It won't let me post links since I'm a newly registered account on these forums, but if you google "n900w8 firmware site:samsungis.com" it will be the first result)
I unzipped the file and flashed the tar file within using odin.
Apra24 said:
I am using the TCE (Mexican) firmware from this link (It won't let me post links since I'm a newly registered account on these forums, but if you google "n900w8 firmware site:samsungis.com" it will be the first result)
I unzipped the file and flashed the tar file within using odin.
Click to expand...
Click to collapse
Not working having same prob and same msg pop up. Means my phone is a factory damaged. And since i rooted it we will see what they will do at sammy lol
Yorgo1982 said:
Not working having same prob and same msg pop up. Means my phone is a factory damaged. And since i rooted it we will see what they will do at sammy lol
Click to expand...
Click to collapse
You know what.. Me being a dumbass tried again to root it after restoring it to the mexican firmware, and now I have the same problem. And now the restore isn't working this time. Why did it work once and not again? Who knows? I just keep trying to factory reset and reflash the firmware, but I'm getting nothing but bootloops.
Could this be a Knox created problem? The reason I say this is you were able to restore a "new" (unknown to Knox) firmware, but it failed on the second time (as it is now no longer newer). I wonder if you were able to find a firmware with a later number (ex ...H2 rather than ...H1) it would install?
Sent from my SAMSUNG-SGH-I317
Dumbo53 said:
Could this be a Knox created problem? The reason I say this is you were able to restore a "new" (unknown to Knox) firmware, but it failed on the second time (as it is now no longer newer). I wonder if you were able to find a firmware with a later number (ex ...H2 rather than ...H1) it would install?
Sent from my SAMSUNG-SGH-I317
Click to expand...
Click to collapse
I'm wondering if the official Bell/Rogers firmware will be available any time soon? Does it typically get released soon after the phone launch, or are they withholding it for some reason?
Apra24 said:
You know what.. Me being a dumbass tried again to root it after restoring it to the mexican firmware, and now I have the same problem. And now the restore isn't working this time. Why did it work once and not again? Who knows? I just keep trying to factory reset and reflash the firmware, but I'm getting nothing but bootloops.
Click to expand...
Click to collapse
I was abe to load the peru (SAM) version on my device with no problem, i am with WIND however but under networks i now have lte as an option as before i did not. i did not just download the kernal i download the stock firmware. do a factory rest after the odin process is done.
eklipse1 said:
I was abe to load the peru (SAM) version on my device with no problem, i am with WIND however but under networks i now have lte as an option as before i did not. i did not just download the kernal i download the stock firmware. do a factory rest after the odin process is done.
Click to expand...
Click to collapse
I was trying the Peru one for a while, but it kept hanging up during the bootup. The message was in a foreign language, but I'm assuming it was "initializing". It would initialize for about 3 minutes then an error message would pop up saying something is not responding.
Did you try recovery factory reset right after Odin does the root and installs the files?
Sent from my SM-N900W8 using XDA Premium 4 mobile app
eklipse1 said:
Did you try recovery factory reset right after Odin does the root and installs the files?
Sent from my SM-N900W8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well I have been trying to. When I flash the firmware in odin, it reinstalls the stock recovery mod. Right after flashing firmware, it won't go into recovery mode on the first boot (first does some android robot install thing, then boots up). I attempted to install the TWRP recovery directly after the firmware, and then booting directly into recovery to factory reset, but I'm still getting a boot loop.
Apra24 said:
You know what.. Me being a dumbass tried again to root it after restoring it to the mexican firmware, and now I have the same problem. And now the restore isn't working this time. Why did it work once and not again? Who knows? I just keep trying to factory reset and reflash the firmware, but I'm getting nothing but bootloops.
Click to expand...
Click to collapse
I think due of the lock. We are not free as b4 to flash anyrom. 2day im shipping my phone to samsung rooted lol how gr8 is that lol
Yorgo1982 said:
I think due of the lock. We are not free as b4 to flash anyrom. 2day im shipping my phone to samsung rooted lol how gr8 is that lol
Click to expand...
Click to collapse
do they know it's rooted/void? Or did you somehow not trigger the knox/warranty void switch? I may just have to do the same thing...
Hi guys, i have some big problems with my n910f, tried to upload a pic to facebook and my phone crashed.
It simply does nothing, not booting, not charging, download and stock recovery are working.
I tried everything possible>
*flashed 3 different stock firmwares with odin
*tried a pit file repartion in odin
*wiped cache, did a few factory resets from stock revovery
*bought a new battery
*tried to root and flash a custom recovery but doesnt work
It is simply as bricked as it could be, the only information about this i have is stock recovery telling me unable to mount /data
So it seems my filesystem got corrupted as hell
The question is, how do i repair it?
Like i said pit file and bootloader flash did nothing, odin lets me flash everything without an error but it doesnt help.
I assume i could somehow repair it with adb fastboot but how?
Any help is welcome!
atilla88 said:
Hi guys,
Any help is welcome!
Click to expand...
Click to collapse
It may or may not help but I would sure try Kies. You NSFW get done errors like Kies telling you is not compatible bit but I would try the firmware initialization.
CodeNameRedNeck said:
It may or may not help but I would sure try Kies. You NSFW get done errors like Kies telling you is not compatible bit but I would try the firmware initialization.
Click to expand...
Click to collapse
Well i forgot to mention that i tried kies aswell, everyhting went good but didnt help, still nothing.
It confuses me a bit that it doesnt even charge, could a broken filesystem lead to this?
atilla88 said:
Well i forgot to mention
Click to expand...
Click to collapse
I am not sure what parts of the system need to be working for the battery to be able to charge. Good luck.
CodeNameRedNeck said:
I am not sure what parts of the system need to be working for the battery to be able to charge. Good luck.
Click to expand...
Click to collapse
did try root=> costum recovery for your variant => installing costum roms for your variant (all can be done with odin +sd card and some fils on it) but warranty is lost it may worth the try
did you try the 5 flashing fils(pit pda bl csc phone) to initial stocks with odin
ZOHUHRZED said:
did try root=> costum recovery for your variant => installing costum roms for your variant (all can be done with odin +sd card and some fils on it) but warranty is lost it may worth the try
did you try the 5 flashing fils(pit pda bl csc phone) to initial stocks with odin
Click to expand...
Click to collapse
i have the same problem, do you know where can we find the complete 5 files (pit pda bl csc phone) for flashing with odin?
its the only thing i haven't already tried.
I manage to fix the issue with storage partition, i used a pit file and the one file firmware in csc button, that made the hole data partition rewriten again so the phone is able to boot properly.
Hope you gays this may help.
Happy new year!!
heratis said:
I manage to fix the issue with storage partition, i used a pit file and the one file firmware in csc button, that made the hole data partition rewriten again so the phone is able to boot properly.
Hope you gays this may help.
Happy new year!!
Click to expand...
Click to collapse
What makes you assume we're all gay?
Sorry pal, i better watch my grammar, i ment guys.
Pokmemon Go/ Uninstalled Kingroot and derooted boot screen custom & gear icon on boot
Hi, so a while ago I tried using kingroot and installed it for a little bit and used root to uninstall some factory installed apps like amazon, etc. then when i decided i did not want root anymore. i used the kingroot app to remove root and then uninstalled the kingroot application.
then i downloaded a root checker app to see if i was rooted. i was not.
now whenever i boot up my phone it says samsung and then the word custom with a gear icon below it.
now when i tried the newest version of pokemon go version 0.37.0 it says it cannot run on my device cause apparently it thinks i am rooted.
is there anyway to solve this? other than a factory reset?
I don't think a factory reset would help either.
You'd have to delete every trace of root left on your device, and kingroot probably left some files behind.
Unless you can find them, the most sure method is to flash another ROM (stock) though Odin.
I believe a custom kernel would also work, or the stock boot.img of your current ROM.
GDReaper said:
I don't think a factory reset would help either.
You'd have to delete every trace of root left on your device, and kingroot probably left some files behind.
Unless you can find them, the most sure method is to flash another ROM (stock) though Odin.
I believe a custom kernel would also work, or the stock boot.img of your current ROM.
Click to expand...
Click to collapse
ok i have the sch i545 on verizon. which program do i use to find and delete the files tha kingroot may have left behind. also where do i get this "rom"?
Rhalium said:
ok i have the sch i545 on verizon. which program do i use to find and delete the files tha kingroot may have left behind. also where do i get this "rom"?
Click to expand...
Click to collapse
The ROM you can get from Sammobile. As for the files left behind, I don't know how kingroot handles those, but to access and delete them you would have to be rooted.
GDReaper said:
The ROM you can get from Sammobile. As for the files left behind, I don't know how kingroot handles those, but to access and delete them you would have to be rooted.
Click to expand...
Click to collapse
ok, i powered down the phone and held the power and volume up buttons to get into recovery mode and then i selected wipe cache partition. and then rebooted. it seems that has solved the custom and gear icon below on when it first boots up. cause now it shows samsung galaxy s4 which is correct. but when i try pokemon go 0.37.0 it still says this device or software is not supported what should i do now? i heard somewhere that you can use xposed framework module
GDReaper said:
The ROM you can get from Sammobile. As for the files left behind, I don't know how kingroot handles those, but to access and delete them you would have to be rooted.
Click to expand...
Click to collapse
ok this is weird. i hold power and vol.up button to get into recovery, then i see flash that says no order i think. then i wipe cache partion. then i power off and boot and the custom ans gear icon is no there its just says samsung galaxy s4 on boot like it supposed to. but then when i go into poke go version 0.37.0 it still wont let me play cause it think im rooted and then i power off and boot up again and there it is again. the custom word and then the gear icon below it. should i do a backup of my phone ans do a factory reset? will that solve it?
Rhalium said:
ok this is weird. i hold power and vol.up button to get into recovery, then i see flash that says no order i think. then i wipe cache partion. then i power off and boot and the custom ans gear icon is no there its just says samsung galaxy s4 on boot like it supposed to. but then when i go into poke go version 0.37.0 it still wont let me play cause it think im rooted and then i power off and boot up again and there it is again. the custom word and then the gear icon below it. should i do a backup of my phone ans do a factory reset? will that solve it?
Click to expand...
Click to collapse
I already told you that a factory reset does not unroot.
If you want to completely unroot, flash the stock ROM.
If you don't want that, downgrade to Pokémon version 0.35.
0.37 has not even been officially released yet. I mean, I don't even have it on the play store and it's the same for many others.
PS: Xposed also needs root.
GDReaper said:
I already told you that a factory reset does not unroot.
If you want to completely unroot, flash the stock ROM.
If you don't want that, downgrade to Pokémon version 0.35.
0.37 has not even been officially released yet. I mean, I don't even have it on the play store and it's the same for many others.
PS: Xposed also needs root.
Click to expand...
Click to collapse
ok thanks, and do i need a specific version of this stock rom? sorry am new to this rooting and rom and stock firmware and bootloader and such.
also it seems there pushing the new update out slowly. also i think the older versions will no longer work soon once the newwer update is firnly established.
Rhalium said:
ok thanks, and do i need a specific version of this stock rom? sorry am new to this rooting and rom and stock firmware and bootloader and such.
also it seems there pushing the new update out slowly. also i think the older versions will no longer work soon once the newwer update is firnly established.
Click to expand...
Click to collapse
You need one for your specific phone model (AT&T or Verizon I assume).
GDReaper said:
You need one for your specific phone model (AT&T or Verizon I assume).
Click to expand...
Click to collapse
yes my phone is verizon. do i need to hook up my phone to a computer in order to flash? will i lose all of the data on my phone when i flash the ROM to it?
Rhalium said:
yes my phone is verizon. do i need to hook up my phone to a computer in order to flash? will i lose all of the data on my phone when i flash the ROM to it?
Click to expand...
Click to collapse
Yes and yes.
GDReaper said:
Yes and yes.
Click to expand...
Click to collapse
ok how do i get the stock boot.img of my current rom? also dumb question, could you explain what a rom is? also is odin a program that i use on my laptop to flash the rom to my phone while it is connected to my laptop? also what is sammmobile? and if you say i should get a rom, is there a specific version of the rom that i should get? sorry for dumb questions.
GDReaper said:
I already told you that a factory reset does not unroot.
If you want to completely unroot, flash the stock ROM.
If you don't want that, downgrade to Pokémon version 0.35.
0.37 has not even been officially released yet. I mean, I don't even have it on the play store and it's the same for many others.
PS: Xposed also needs root.
Click to expand...
Click to collapse
ok now do you mean a firmware or rom? am i at the right place see screencap. also how large should these files be? i already have odin downloaded. i am using this guide: http://downloadstockrom.com/download-android-4-4-2-stock-rom-for-samsung-galaxy-s4-sch-i545-2.html
GDReaper said:
I don't think a factory reset would help either.
You'd have to delete every trace of root left on your device, and kingroot probably left some files behind.
Unless you can find them, the most sure method is to flash another ROM (stock) though Odin.
I believe a custom kernel would also work, or the stock boot.img of your current ROM.
Click to expand...
Click to collapse
http://smallbusiness.chron.com/use-odin-android-28504.html
this website says i need a pit file and a tar file. i already found the pit file here on xda which was a few megabytes and am downloading the tar file from the site seen in the screencap below. are these the correct files i should be using?
Rhalium said:
http://smallbusiness.chron.com/use-odin-android-28504.html
this website says i need a pit file and a tar file. i already found the pit file here on xda which was a few megabytes and am downloading the tar file from the site seen in the screencap below. are these the correct files i should be using?
Click to expand...
Click to collapse
You don't need a pit file. And if the files are wrong, the instalation will just fail.
If that's the firmware you had previously, then it's ok.
GDReaper said:
You don't need a pit file. And if the files are wrong, the instalation will just fail.
If that's the firmware you had previously, then it's ok.
Click to expand...
Click to collapse
ok so i just use the tar file i got from the rwilco12 website and use that with odin and my phone?
Rhalium said:
ok so i just use the tar file i got from the rwilco12 website and use that with odin and my phone?
Click to expand...
Click to collapse
Yes. But if the firmware is older than what you had on the phone (5.0 > 4.3) it may fail to flash.
GDReaper said:
Yes. But if the firmware is older than what you had on the phone (5.0 > 4.3) it may fail to flash.
Click to expand...
Click to collapse
ok when i bought the phone it was on 4.4.2 or something and then when i got it i soon updated it to 5.0. so now you are saying to use it with this? http://androidromupdate.com/2015/08...y-s4-sch-i545-ota-update-with-loads-of-fixes/
the 5.0 lollipop one right? also is there a diference between a stock firmware and a stock rom or are they the saem thing?
Rhalium said:
ok when i bought the phone it was on 4.4.2 or something and then when i got it i soon updated it to 5.0. so now you are saying to use it with this? http://androidromupdate.com/2015/08...y-s4-sch-i545-ota-update-with-loads-of-fixes/
the 5.0 lollipop one right? also is there a diference between a stock firmware and a stock rom or are they the saem thing?
Click to expand...
Click to collapse
Stock ROM and stock firmware is the same thing.
GDReaper said:
Stock ROM and stock firmware is the same thing.
Click to expand...
Click to collapse
Have you even looked at any of the linkes or screencaps ive included in these posts? so this is the tar file i should be using to put my s4 back to stock? it says may 21 2013. see screencap. i got it from that rwilco 12 site.
Flashed Phoenix,used several days,suddenly wifi disconnected then in a few seconds connected again,it looped and I rebooted to find wifi isn't working at all,stuck at opening and grey button.
Then I flashed back to morphose,still the same.
So I flashed via Odin the latest Chinese official firmware(ZC???OH2) with 11G pit.This time I got about 15 mins of stable connection.After that the problem occurred again,exactly the same.:crying::crying:
Below is what I have done:
Pressing around the sdcard (it is said to be where the wifi chip is located,and it maybe caused by poor contact)
Reboot a thousand times
Changing kernel(kingz,stock,voltaqe)
Wiping cache and Dalvik
Mortifying build.prop to ro.securestorage.support (maybe not exact)from true to false(said to be a solution)
Forgot to mention :
1.the firmware was a repair firmware(five .md5 files)
2.in that firmware not only wifi but also Bluetooth fails to open
Download the latest single tar.md5 file from sammobile.com or updato.com and flash again. Don't forgot to perform a factory reset from stock recovery before letting the stock ROM boot for the first time.
audit13 said:
Download the latest single tar.md5 file from sammobile.com or updato.com and flash again. Don't forgot to perform a factory reset from stock recovery before letting the stock ROM boot for the first time.
Click to expand...
Click to collapse
Thanks for your reply
Should it be 8gb pit or 11gb?
And should it be my region or just the latest firmware no matter from where?
Flash the version for the region that the phone was made for.
Pit file is not needed unless Odin can't read the phone partition information.
audit13 said:
Flash the version for the region that the phone was made for.
Pit file is not needed unless Odin can't read the phone partition information.
Click to expand...
Click to collapse
Sorry for bothering again,but i found it was made for Europe.On updato there seems to be no region "europe",only Germany.So which one shall i flash?
Thanks in advance☺
You can try one for Germany. If it is not made for your phone, Odin will halt the flash process.
audit13 said:
You can try one for Germany. If it is not made for your phone, Odin will halt the flash process.
Click to expand...
Click to collapse
I began to wonder if it is correct that the device is European,for it was bought in offical China mainland market?But imei also showed that?
I am such a noob at coping with this kind of weird issue
Anyway i will download both ones and give a try in several days,the download speed is rather slow from updato:crying:
Sent from my Samsung Galaxy S4 using XDA Labs
Wait, if it was purchased in China, it's probably made for the Chinese market and will need the firmware version made for one of the Chinese carriers. Odin will not flash non-China firmware on a made-for-China phone.
audit13 said:
Wait, if it was purchased in China, it's probably made for the Chinese market and will need the firmware version made for one of the Chinese carriers. Odin will not flash non-China firmware on a made-for-China phone.
Click to expand...
Click to collapse
Attachment is my imei searching result,it is shown made for Europe.Besides,I remember flashing other region firmwares and booted normally
And with China baseband I have very bad signal but after flashing other ones it is far better...so I guess it might be a phone wrongly sent to China market or something like that?
The connection to updato is so unstable that I still haven't finished downloading?
Edit:screenshots removed
Boot into download mode and confirm that the phone is a gt-i9500. If it is, flash the latest ROM from sammobile.com or updato.com for the 9500. You'll probably be okay with any ROM from Europe.
Don't flash with a pit file as a pit file is only needed if you need to re-partition the internal memory for some reason or Odin cannot read the phone's partition information.
Edit your post to remove your imei too.
audit13 said:
Boot into download mode and confirm that the phone is a gt-i9500. If it is, flash the latest ROM from sammobile.com or updato.com for the 9500. You'll probably be okay with any ROM from Europe.
Don't flash with a pit file as a pit file is only needed if you need to re-partition the internal memory for some reason or Odin cannot read the phone's partition information.
Edit your post to remove your imei too.
Click to expand...
Click to collapse
No,still no luck at all,wlan still does not work...Whats more in germany firmware i also get "com.android.media has stopped"
This is killing me,my network provider uses TD-SCDMA for 3G,but i9500 don't support that,so i can only use EDGE network,which is extremely slow.Anyway maybe I'll get another phone next month:victory:
audit13 said:
Boot into download mode and confirm that the phone is a gt-i9500. If it is, flash the latest ROM from sammobile.com or updato.com for the 9500. You'll probably be okay with any ROM from Europe.
Don't flash with a pit file as a pit file is only needed if you need to re-partition the internal memory for some reason or Odin cannot read the phone's partition information.
Edit your post to remove your imei too.
Click to expand...
Click to collapse
Finally discovered something new.I am on miui8,when charging to 100％ wifi connects,and it wont disconnect even unplug the cable until you do a reboot!Dont know if it works on other roms,but it does throw new light on the issue.
But...how does this happen?
This is very strange. I've never come across this situation with any phone.
audit13 said:
This is very strange. I've never come across this situation with any phone.
Click to expand...
Click to collapse
Thank you!It is said that Wifi and bluetooth are on the same chip,so if bluetooth is now always working even wifi is broken then it cannot be a hardware failure,can it?
It could be a hardware failure but now I'm not sure since you got it to work on a custom ROM.
audit13 said:
It could be a hardware failure but now I'm not sure since you got it to work on a custom ROM.
Click to expand...
Click to collapse
After testing for an afternoon I discovered:
Wifi will be unable to use the moment battery drops to 81%,it doesnt turns off,but simply shows no item in the list.
If I plug the charger and restart wifi,then it works properly.
If I restart wifi without charging,wifi will be stuck and I have to charge then reboot the phone to get it on again.
Wow, this is even more strange.
Do you have a cell repair shop that can diagnose it for you?
audit13 said:
Wow, this is even more strange.
Do you have a cell repair shop that can diagnose it for you?
Click to expand...
Click to collapse
Yeah,but i'd rather get a new phone if it takes much time or money to repair it.The phone is still my daily driver,though i love it,it is indeed out of date,plus the problem.Getting something like a Redmi 5A might be a better choice?Moreover the rom is not that stable,battery life is also poor,but i dare not flash another rom for fear that wifi gets totally broken.
Thanks again for your time?
In this case, have you looked into getting a used motherboard?
I'm not sure where you are located but there is a big market in my city for used phones. When I need a motherboard, I look for people selling phones with smashed screens and working internal components.
I tried installing UK firmware on my Galaxy S8+ using Odin, but it got stuck at system.img and now I can only boot the phone into download mode.
I've tried installing the original firmware as well but it also gets stuck at system.img.
Has this happened to anyone else? And is there anything I can do to fix this or am I ****ed?
Thank you very much in advance for any help
Did you use the most recent version of Odin (v3.13.1) ?
ruben1515 said:
Did you use the most recent version of Odin (v3.13.1) ?
Click to expand...
Click to collapse
Yep
nocuna said:
Yep
Click to expand...
Click to collapse
Did you select all files at once?
ruben1515 said:
Did you select all files at once?
Click to expand...
Click to collapse
Yeah I did.
I've spent half the day trying to fix this, but it actually seems to be hard bricked.
All I wanted was the Pie Beta
If your Odin and files are right it might be the cable, if you're not using the original cable it causes that it happend to me many times. Hope this helps you
nocuna said:
Yeah I did.
I've spent half the day trying to fix this, but it actually seems to be hard bricked.
All I wanted was the Pie Beta
Click to expand...
Click to collapse
Try nand erase pit within Odin , hopefully this could bring it back ..
riseofsand said:
If your Odin and files are right it might be the cable, if you're not using the original cable it causes that it happend to me many times. Hope this helps you
Click to expand...
Click to collapse
I just bought a Galaxy S9 so I'll try to flash using that cable. Thank you!
Scorpionea said:
Try nand erase pit within Odin , hopefully this could bring it back ..
Click to expand...
Click to collapse
I'll try that thanks, what does it do?
nocuna said:
I'll try that thanks, what does it do?
Click to expand...
Click to collapse
Well that is a very dangerous process and should not be done if u dont have any major issue but since u have pretty much death phone as u say it cant hurt to try as a last option.
Google what nand erase is in odin option,it will explain much better then me [emoji14]
Wish you all luck
Edit : try and see if u can find any emergency firmware aka repair firmware for you s8 if it exists and flash with that
Scorpionea said:
Well that is a very dangerous process and should not be done if u dont have any major issue but since u have pretty much death phone as u say it cant hurt to try as a last option.
Google what nand erase is in odin option,it will explain much better then me [emoji14]
Wish you all luck
Click to expand...
Click to collapse
I've tried it now, same result as always :/
In download mode it says OEM LOCK: ON, could that be the reason why?
nocuna said:
I've tried it now, same result as always :/
In download mode it says OEM LOCK: ON, could that be the reason why?
Click to expand...
Click to collapse
Since u trying to flash samsung official firmware it shouldn't matter. Dont know what to advice as u tried pretty much everything i would do.
Maybe someone with more insights and knowledge what to do could help you but dunno.
Search the web all i can say.
Can u boot into the recovery? Maybe try to flash twrp and format everything from there ?
Scorpionea said:
Since u trying to flash samsung official firmware it shouldn't matter. Dont know what to advice as u tried pretty much everything i would do.
Maybe someone with more insights and knowledge what to do could help you but dunno.
Search the web all i can say.
Can u boot into the recovery? Maybe try to flash twrp and format everything from there ?
Click to expand...
Click to collapse
I think I've gone through every forum post and article on the internet about the issue, can't seem to find a solution.
Can't boot into recovery either, only download mode. I'll keep trying and I'll see if I can send it in for repair.
Thanks for your help, really appreciate it.
nocuna said:
I think I've gone through every forum post and article on the internet about the issue, can't seem to find a solution.
Can't boot into recovery either, only download mode. I'll keep trying and I'll see if I can send it in for repair.
Thanks for your help, really appreciate it.
Click to expand...
Click to collapse
Have you fixed it already? If not try flashing everything with odin and also in 'Pit' tab put dreamlte .pit file from inside CSC .md5 file(open with rar)
Double check your files make sure you're not flashing an old fw and your Odin
After that, you probably try to flash using a non original data cable, its not a must but some cables can cause that
badaboomBURP said:
Have you fixed it already? If not try flashing everything with odin and also in 'Pit' tab put dreamlte .pit file from inside CSC .md5 file(open with rar)
Click to expand...
Click to collapse
I'll try that, thank you
riseofsand said:
Double check your files make sure you're not flashing an old fw and your Odin
After that, you probably try to flash using a non original data cable, its not a must but some cables can cause that
Click to expand...
Click to collapse
I've triple-checked everything. Both Odin and the files are all up to date, and the files are from the same firmware I had on the phone before it got bricked.
I'm going to try using firmware from SamMobile instead of SamDB.org, and will post back with results.
UPDATE:
Flashed firmware from SamMobile, it went through and my phone works again. Can't believe I spent $7 on SamDB for faster download speed and all I got was some files that don't even work properly. Next time I'll be more patient I guess