How to port Always On Display on any rom?
I think it needs any kind of kernel improvement, please correct me if I'm wrong??
Related
My question is if there any way to make the ir [infra red] port bigger distance , the ir on tytn need to be so closer to the "item" for work , i want to control it from far away .
Any way?
bump ...
no one know?
I would like to test it. Which software are you using?
Thanks
Im not using anything , i request for somthing like that .
Unfortunatley the IR on the hermes is very low power, this is an issue that anyone who has tried Noviremote or any other IR control software has found out. As far as I know this is a limitation of the hardware in the device.
Cant to give him more power?
There has been talk of possible hardware mods in the past
http://forum.xda-developers.com/showthread.php?t=355223
Not sure that its actually ever been done though.
Thanks markafreeman, i'll give it a try.
I'm not a Developer, but reading some information (i.e. http://www.arduino.cc/playground/Learning/LEDSensor ) I thought that if the leds of our phone (I'm thinking about the G1, 'cause I have it ) is connected to a pin that can be input and output at the same time, we may use it as a Light Sensor! But we need some dev that gives sw support for it...
And then, we may tell Android that the behaviour of the Light Sensor has to invert when we answer a call, and then we have a Proximity Sensor!
If someone could implement this, the devices that doesn't have a Light or Proximity Sensor could have something like it! And we just need a led!
It's just an Idea, but I think it could be awesome. What do you think about that?
[EDIT] we may need to see how long a led takes to shut himself down, and use the data to tell the system to change the backlight... using GPIO controls? [/EDIT]
yeah, thats not bad of an idea. I came from windows mobile and devs made an app for this exact purpose. maybe someone can do it for android as well.
I talked to a person that develops for embedded systems and I he said it would be difficult... He had no good result... But I don't think we're lost, if you say that it's really possible, maybe we can do it
haha i know its possible because it has been done and works on the Touch HD (my prev device) which coincidentally has the same hardware as the Hero. Its a definite possiblity, just that I don't know anything about writing programs for Hero. But my guess is that root access would be a must since you're modifying the usage of the light sensor
Then we just need devs!
Try asking the Dev that made the Leds flash for Sdcard activity, it looks really cool when you use it:
http://forum.xda-developers.com/showthread.php?t=690914
Ace42 said:
Try asking the Dev that made the Leds flash for Sdcard activity, it looks really cool when you use it:
http://forum.xda-developers.com/showthread.php?t=690914
Click to expand...
Click to collapse
But it's not the same thing, I may ask but now we need to use the led to capture light, not to send it...
I have an idea for a project that requires a large panel to be attached to a small phone, does any one know if this is possible.
I know from previous projects that the galaxy line phones seem to have similar cables and connectors but , for example, could I plug a note screen into a GS2? I know the ribbons wont be in the right place and it will be bodged together but that isn't important. What is important is will they physically connect??
My hardware knowledge is good but by software side not so good. I know that android is capable of adapting to different resolutions but will this work "out the box" or will the resolution need changing in the build,prop, or maybe more??
any ideas on this please share, I think this is quite an exciting project that I will share and colabarate with if it is feasable. Its still at the rough concept stage at the moment and I am just checking out the theory behind it so please share your knolage and experience
Possible, but not easy
add.thebad said:
I have an idea for a project that requires a large panel to be attached to a small phone, does any one know if this is possible.
I know from previous projects that the galaxy line phones seem to have similar cables and connectors but , for example, could I plug a note screen into a GS2? I know the ribbons wont be in the right place and it will be bodged together but that isn't important. What is important is will they physically connect??
My hardware knowledge is good but by software side not so good. I know that android is capable of adapting to different resolutions but will this work "out the box" or will the resolution need changing in the build,prop, or maybe more??
any ideas on this please share, I think this is quite an exciting project that I will share and colabarate with if it is feasable. Its still at the rough concept stage at the moment and I am just checking out the theory behind it so please share your knolage and experience
Click to expand...
Click to collapse
It is feasible, lots of screens use similar interfaces (parallel TTL, MIPI, LVDS, etc.) so the trick is finding a display with the same interface as your phone already has. You will then need to make a board to adapt from the flex cable you have to the flex cable on your new screen. On that board you will probably also need to provide power since the new screen will consume more power. You will then need to modify the kernel, bootloader and Android to set the correct timing and resolution. (Timing, pinout and resolution for Linux kernel and U-Boot and resolution and DPI for Android) Shoot me a PM, I do this kind of stuff as a consultant and I am happy to give you some pointers!
hello
when my phone is charging my lcd is turned off but i can read and see screen and but its dark and its dont have light
what is problem?its Hardware problem or Software problem?
tnx
dn.farzin said:
hello
when my phone is charging my lcd is turned off but i can read and see screen and but its dark and its dont have light
what is problem?its Hardware problem or Software problem?
tnx
Click to expand...
Click to collapse
pls answer me
What do you mean exactly?
Is this when the Screan sound be off or on?
And wich OS and Bootloader are you using?
dn.farzin said:
hello
when my phone is charging my lcd is turned off but i can read and see screen and but its dark and its dont have light
what is problem?its Hardware problem or Software problem?
tnx
Click to expand...
Click to collapse
The best way to check whether it's a software or hardware problem is to reinstall stock winmo. If the problem disappears, it was android related. Otherwise, your device is most likely faulty.
I didn't make this but i found it on google.
It's a fix for charging effect on s6 port. Can anyone test it out and tell if it works?
https://mega.nz/#!dwZHHS4I!R2WaK0iEyD-r-gqH2qSlo1CrQYlQXPDVkTpoTGD-YlE
or Use other link if it ask for key.
https://www.mediafire.com/?59qg21a2qzi2gpw
Lol