Substratum on Touchwiz - Galaxy Note5 General

I'm using substratum on Touchwiz. Through this method you can theme only apps, not the system. Here is the method: BEFORE DOING THIS PLEASE TAKE A BACKUP OF YOUR SYSTEM, IM NOT NOT RESPONSIBLE FOR ANY HARM CAUSED BY THIS METHOD. AND IF IT WORKS, ALL CREDIT GOES TO 'Gravedigger'
1. First apply any theme from Samsung theme store,
2. Apply substratum theme
3. Reboot
4. Go to system/vendor/overlay. Copy the files and move it to dada/overlay/style and then again data/overlay/current style.
5. Roboot
6. Apply the same substratum theme again, reboot and smile.

zubairshimon said:
I'm using substratum on Touchwiz. Through this method you can theme only apps, not the system. Here is the method: BEFORE DOING THIS PLEASE TAKE A BACKUP OF YOUR SYSTEM, IM NOT NOT RESPONSIBLE FOR ANY HARM CAUSED BY THIS METHOD. AND IF IT WORKS, ALL CREDIT GOES TO 'Gravedigger'
1. First apply any theme from Samsung theme store,
2. Apply substratum theme
3. Reboot
4. Go to system/vendor/overlay. Copy the files and move it to dada/overlay/style and then again data/overlay/current style.
5. Roboot
6. Apply the same substratum theme again, reboot and smile.
Click to expand...
Click to collapse
Thanks for sharing. may I know need root?

Root is needed to get into system files.

@zubairshimon works thank you
Sent from my T-Mobile Samsung Galaxy Note5 using XDA Labs

Related

[Update.zip] *NEW* Alphamod GingerDX[25/03/2012]

Hi
This is my update.zip
I made it basically for me to flash with every gingerdx rom update
So some users told me to post it somewhere because its wonderful work
Really it is.. because i change many visually things in system
I didn't copy anyone framework..i just use from others devs artwork and some apps
Its modified system update
To see it you must have set the system theme
Install guide:
• Make your current rom a cwm backup(for future restore)
• Download the update.zip and move it in sd card
• Reboot to clockworkMod recovery
• Install custom zip from sd/choose custom zip/install Alphamodgingerdx.zip/back/reboot phone
• DO NOT MAKE FULL WIPE
Then:
•With your mobile browser get to this post and copy the following code:
su
setprop dalvik.vm.verify- bytecode false
setprop dalvik.vm.dexopt- flags v=n,o=v
reboot
Open terminal emulator and type:
•su (and enter with mobile keyboard enter button for superuser permission)
•Long tap the screen and paste the code
•Enter again
•Then the device will itself reboot
•Tap tap when logo appears to get in CWM
In main menu of CWM:
•Go to wipe cache partition and wipe
•Back to main menu
•Go to advance/wipe dalvik cache/and wipe
•In advance menu there is a option reboot recovery DON'T make reboot from there
•Press the back button to get in the main menu
•Reboot system now
Unistall guide:
• Restore previous backup
• Flash again the latest GingerDX
INCLUDES:
• Modified framework
• Default fonts
• Boot animation xperia
• xperia contacts and dialer
• Infinity view
• Default transition animations
• Improve scrolling
• Xperia mms apk
• Xperia keyboard set as default input
• Xperia 4c launcher (optional.. added flash.zip down)
• Camera apk
• Modules-addons for stock kernel
• Spare parts
• Browser
• Calculator
• Calendar
• ics market(after installing go to system/app and delete the Vending.apk)
• Modified systemUI
• Modified settings apk
• Radio apk
• Xperia notes
• Gallery apk
• DeskClock apk
• Ringdroid
• Ics music apk
• Lockscreens
• tweaked buid.prop
• smoothness script
• Bravia engine™
• Xloud™
• Touch sensitivity script
• Useless cache cleaner script
• S99Tweaks
• s97ramscript(deleted for v23)
• Verify-Bytecode enable in build.prop
Read carefully this:
•If using custom kernel delete the modules file in system/lib of update.zip before flashing
•What is Verify bytecode read here:
www.netmite.com/android/mydroid/dalvik/docs/verifier.html
•And here:
www.netmite.com/android/mydroid/dalvik/docs/embedded-vm-control.html#verifier
Good luck
Thanks go to:
• Doixahn for the great rom
• Agung Ikspi D'da Vinci artwork
• Frogy (lasan here) for system apps
• jimdem
• And many others
Disclaimer:
I'm not responsible if this bricks your phone
Alphamod for v23 download link: http://db.tt/nN5oL9r8
Download link: http://db.tt/loZIihLr
4corner xperia launcher: http://db.tt/9Pu6L02H
Default dialer flash zip: http://db.tt/b07hn0SL
Screenshots: http://db.tt/cCPLgbDp
I dont use gingerdx so I cant test but this would get more attention if it was posted in dev section.
Thanks for sharing, I will download and keep as I change roms often and I usually try dx new releases.
Would this work with any other roms? If you did not try then I will try with kuyadroid and gingerxperia tomorrow.
Sent from my E15i using XDA App
Any screenshots please? Wrong section,dude.
Hit the THANKS button if I helped!!
Sent from my W8 using Tapatalk
I think is the right section because is not a rom
And also not only a theme
Development section is not only for roms, but also mods.
Hit the THANKS button if I helped!!
Sent from my W8 using Tapatalk
Could you upload some creenshots
Screenshots added
Better way to see the difference its live view experience
Needs more glass and ponies..
Srsly..to dark..to gloomy..to shine..still nice work
I tried it!
Could you make it compatible in other rom,just like jimdemdroid...Nice update.zip...Thanx...
Didn't try it in other rom
I'd like a feedback here if someone tried..
I'm little busy now because i search how to make smooth rotation animation
If this is possible..
I installed it on kuyadroid but I cant see any changes, I will take screenshots and install backup and compare. On mobile now so cant download screenshots from above.
Sent from my E15i using XDA App
Ok i will try to the other rom after my work...
I was a little busy lately...
My update.zip it's fully compatible with v22 version
2alphamod update zip added!
Enjoy
New update added
Enjoy
is active launcher smooth in this rom?
I never tried
is not a rom.. its update.zip for Gingerdx
it's very fast and very smooth
set the system theme before..
maybe i try it..coz i still using miniCM..
Hefko said:
is active launcher smooth in this rom?
Click to expand...
Click to collapse
Ok
I modified one to work good
Flash it with CWMrecovery
4corner xperia launcher: http://db.tt/3l7bLUuk
Screenshot: http://db.tt/HcGuk3Ld
I have also link in first post.
I have one question. After the installation, the "Brightness" and the "Sound" widget in notification bar did not respond. How can I make it work? Everything else working just fine, but not these options. And one more thing - I was with GingerDX v.17, and after this update now it's shows v.22. Thanks in advance for your answers!
P.S. Sorry if I disturb you with my poor english!

[Q] rw mounting help

Hey im sure im one of many who have asked this but I looked around I couldnt find a solution that worked for me
My goal is only to change my lock ring softkeys and glowdots simple right? It always was until recently...
Ive tried a few roms and I installed busybox completely its updated and everythimg I do have root acess
My bootloader is indeed unlocked. And everything is done correctly
I am running 4.4.2 a custom somy z1 rom on nexus 4 16gb
I have tried both zipthemer and metamorph and
Metamorph claims rw is not mounted
On some roms I was able to chamge softkeys in some cases and not be able to do lock rings though
My questions are can you lead me to mounting and it would be lovely if someone can explain to me how this works and why I could change one but not the other.
Thank you
KrisLovesTacos said:
Hey im sure im one of many who have asked this but I looked around I couldnt find a solution that worked for me
My goal is only to change my lock ring softkeys and glowdots simple right? It always was until recently...
Ive tried a few roms and I installed busybox completely its updated and everythimg I do have root acess
My bootloader is indeed unlocked. And everything is done correctly
I am running 4.4.2 a custom somy z1 rom on nexus 4 16gb
I have tried both zipthemer and metamorph and
Metamorph claims rw is not mounted
On some roms I was able to chamge softkeys in some cases and not be able to do lock rings though
My questions are can you lead me to mounting and it would be lovely if someone can explain to me how this works and why I could change one but not the other.
Thank you
Click to expand...
Click to collapse
What's the problem with zipthemer? Never fails me so far.
arffrhn said:
What's the problem with zipthemer? Never fails me so far.
Click to expand...
Click to collapse
Can you give me your directions I used to always use it
But sometimes itll only make some mods work and Some not
KrisLovesTacos said:
Can you give me your directions I used to always use it
But sometimes itll only make some mods work and Some not
Click to expand...
Click to collapse
1. Make sure you are rooted.
2. Download the lockring you want and copy it into your phone (or just download it using phone).
3. Install zip themer app.
4. Update edify (make sure you have the rom zip which you are currently using saved in your phone storage).
5. Choose theme and select the previously downloaded lockring.
6. Create it.
7. Note the new zip file created for the lockring.
8. Reboot into recovery. Flash the newly created zip.
9. Reboot into system and that's it.
More detailed steps here. http://forum.xda-developers.com/showpost.php?p=39572221&postcount=18
arffrhn said:
1. Make sure you are rooted.
2. Download the lockring you want and copy it into your phone (or just download it using phone).
3. Install zip themer app.
4. Update edify (make sure you have the rom zip which you are currently using saved in your phone storage).
5. Choose theme and select the previously downloaded lockring.
6. Create it.
7. Note the new zip file created for the lockring.
8. Reboot into recovery. Flash the newly created zip.
9. Reboot into system and that's it.
More detailed steps here. http://forum.xda-developers.com/showpost.php?p=39572221&postcount=18
Click to expand...
Click to collapse
Didnt work

[Tutorial] Change System Fonts on Marshmallow

Hi today I will show you how to change system fonts on Marshmallow.
Requirements:
Root Access
Steps:
Go to play store and download this app: https://play.google.com/store/apps/details?id=git.hub.font&hl=en_GB
Then open it and select the font that you wish to apply. Download it and apply it.
The app will ask you to grant root permissions. Grant access.
Reboot your device. It may take a while to boot up.
Important:
If you have Xposed installed you will get a notification about activating Fonter in Xposed.
DO NOT ACTIVATE Fonter in Xposed, because it will brick your device.
If your device bootloops then go to this thread and download xposeduninstaller :http://forum.xda-developers.com/showthread.php?t=3034811
Screenshots are here: https://drive.google.com/folderview?id=0B-qjjnfHrznhS2JnekRNd1ZYa28&usp=sharing
Thank You

[P][G8141/G8142][.306] M-ROM P v1

I DID NOT CREATE THIS ROM OR THE RECOVERIES OR FLASH TOOLS LINKED, I ONLY MODIFIED THE SYSTEM UI AND SETTINGS AND BUILD PROP ZIPS BELOW.
I am not responsible for any damage (if any) to your device, data, life, job or anything else you'd care to think of.
ANY QUESTIONS, PLEASE ASK IN THE THREAD AS EVERYONE BENEFITS, PM'S WILL MOSTLY BE IGNORED.
IF YOU DON'T HAVE AN UNLOCKED BOOTLOADER YOU MUST FIRST UNLOCK IT.
Download all files you want/need to your PC/External SD before starting...just saying.
[/CENTER]
​Step One
​
Flash stock firmware for your device that the rom is based off. Readily available from Xperifirm (attached to flashtool - Bonus!), or XDA. Flash via Flashtool or Newflasher. Again, there's plenty of guides on using flashtool and newflasher, i'm not covering that here.
​
Step Two
​
Once flashing has completed, turn the device on and allow it to fully boot. Complete the setup process, and log in to your google account. Move the ROM file you already (hopefully) downloaded to internal storage (IMPORTANT STEP: I had symlink errors flashing the ROM from the External SD Card). I normally disable auto-updates in the Play Store/Whats New apps and then let it rest for 5 minutes.​
Step Three​
Turn your device off, boot into FASTBOOT MODE, and flash TWRP (fastboot flash recovery TWRP/ATWRP.img). If you don't know how to fastboot, see above re: XDA/Google. Unplug your device, wait 10 seconds, then boot into recovery (Hold power and volume down together, release both at at the vibration). Tick the checkbox then swipe right, and the first thing you SHOULD do is go to settings and turn the damn vibration off. :laugh:
​Step Four​
DON'T WIPE ANYTHING!!! You are installing on top of an already clean installation, its pointless. Press Install, select the XPERIA_PIE_XZP_1.0.zip file you downloaded earlier, and swipe right to install that sucker. Don't freak out when it takes 5 to 8 minutes for the recovery screen to change, its doing its thing, trust me. Once you get the all clear and the button down the bottom says reboot, that's pretty much all that's left to do.​
Step Five​
Once the phone reboots, let it settle again for a while, and deny all the requests the Chinese apps throw at you. After a few minutes, go into the root explorer app, allow root permissions when it requests it, then go to system/priv-app and delete any app starting with TG. Unless you really like Chinese bloat, in that case, proceed to set up your phone as usual.
The ROM is pretty basic at the moment but given time and based off the Oreo series, more System UI mods will become available with later versions.​
CREDITS: @machao44 @uditrawat @Myself5 @Androxyde @munjeni @Ticklefish @Pandemic
@fOmey[/SIZE]
DOWNLOAD LINKS​
M-ROM P v1: BASED ON 306 FIRMWARE https://drive.google.com/file/d/1eOWzREBPehv8QoCFYQfPdF4yqKH2NdB1/view
M-ROM P v1.1: BASED ON .33 FIRMWARE
https://mega.nz/#F!MNYGhKhR!OtCS6j-YBXaxcDI1sa7FlQ
Thanks to @sam.foro for uploading.
M-ROM P v1.2: BASED ON .41 FIRMWARE
https://drive.google.com/open?id=1ZX...ixVN09Ry_vVhDf
Thanks to @Yanun
https://drive.google.com/file/d/14K-...ew?usp=sharing
Thanks to @karrouma
M-ROM P v1.3: BASED ON .41 FIRMWARE
https://drive.google.com/open?id=10l...uGinaYCEzy-vt_
Thanks to @Yanun
TWRP: https://dl.twrp.me/maple/
Aroma TWRP: https://mega.nz/#!TdxmiaLb!FYBet5eRYHGqiLT0niRH9F90Ts_QeRdfkOfPWOAgQCM
Flashtool: www.flashtool.net/
Newflasher: https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426
M-Rom P v1.6 - BASED ON 10.28 FIRMWARE - Thanks to @karrouma for uploading and sharing
https://drive.google.com/file/d/1pNsIaGR2_r74INyH8p053bQStiruPEWd/view?usp=sharing
M-Rom v1.6 - English Translated
https://mega.nz/#!6ExSGYQZ!HD0YM_Sypeu5h-6K4vhKT9NkiQn_63PZG0ZPwf_kRmY
M-ROM 1.6 aroma add-on.
M-ROM v1.6 aroma add-on - contains .25 animation mod, font picker and fonts, xperia 10 boot animation, double tap to wake kernel selection (g8141/g8142), and magisk 18.1/19.0 selection.
Enjoy.
https://mega.nz/#!nZpihCqK!TvB0_-w0cdTWFBKylPUk5Da3YdLAJCc_vk5d8XNDySc
Beetle84 said:
ADD-ONS​
And now we have a few add-ons. You don't really need any of these, but its XDA and if you've come this far you obviously like flashing stuff so here we go...
The Modified Animation Values zip has one extra setting added in developer options, to the animation duration settings. .25 duration has been added (extra fast). Theres no real point to this other than making things seem quicker, but this zip has the added bonus of having the XZ3 Settings.apk included. (Stock XZ3 settings.zip also supplied) FLASH IN RECOVERY
Modified Settings: https://mega.nz/#!qF4gBazC!R4hoXd_1fEOCxwrrttpXRR0CBCO9A3L8QZq3y3A-NEY
Stock Settings: https://mega.nz/#!HQwSSCAC!T3rPbcPLCCVVcMVCZGk3cDKp6DreHtjVYxEcRer3ORQ
The Rounded Recents zip has a modified SystemUI.apk that has (surprisingly) rounded recents modified into the apk. I have also pushed all the right side status bar icons across a little and shortened the space between the data icon and the battery (stock SystemUI.apk zip supplied). FLASH IN RECOVERY
Modified System UI: https://mega.nz/#!iQ4URIzJ!ssb0Wn7rXfqdU9ll3PWGp6Ba7Qx7rfnzH_QxHocEOV4
Stock System UI: https://mega.nz/#!qEpQwIYT!6QDuEWPHiWT111ah2X39z2UzcXvpmEqO2KlAnNpnA_E
The G8141 build prop zip has a build prop modified to say G8141 for those picky (like me) and don't like seeing G8142 in about phone. If you have a G8142, ignore this whole bit about build.prop. Unzip the file and move the file with a root explorer to /system and apply R-W-R-R permissions and reboot.
G8141 Build.prop: https://mega.nz/#!WBwklSCZ!3AfXbN6JmsE0eihgx8Rn7O7deEnbz2KW048WLUm4Grc
MAKE A BACKUP FIRST MAKE A BACKUP FIRST MAKE A BACKUP FIRST
Last but not least, is the Deodex patch (COMING SOON - UPLOADING) for this ROM. Expect lengthy boot time first go, and then longer than usual every time after that. If you flash this zip, your keyboard will be removed, unless you have a keyboard already installed from the Play Store. YOU WILL HAVE NO KEYBOARD AFTER FLASHING THIS ZIP UNLESS YOU ALREADY HAVE ONE INSTALLED FROM THE PLAY STORE! YOU HAVE BEEN WARNED! TWICE!!!
Deodex Patch:
Enjoy
Click to expand...
Click to collapse
Thank you my friend
Great job
Nice
Thanks for this
Nice bro
Keep it up ^^
Added Patched Services.jar Magisk Module to Post 3.
I wonder if the uploaded file is not damaged.
I downloaded twice, filesize reached 1.52 GB at 100%. But the zip file fails to open. Can not be extracted as well
Therefore I did not try it in TWRP.
hasaan6545 said:
I wonder if the uploaded file is not damaged.
I downloaded twice, filesize reached 1.52 GB at 100%. But the zip file fails to open. Can not be extracted as well
Therefore I did not try it in TWRP.
Click to expand...
Click to collapse
Its not a new upload so I wonder what is happening. It is the same link available from the Oreo M-ROM thread, just copied and pasted.
Are you downloading from your device or from a PC?
Removed
link opened fine. and the file is fine opened normally . no problem
Beetle84 said:
ADD-ONS​
And now we have a few add-ons. You don't really need any of these, but its XDA and if you've come this far you obviously like flashing stuff so here we go...
The Modified Animation Values zip has one extra setting added in developer options, to the animation duration settings. .25 duration has been added (extra fast). Theres no real point to this other than making things seem quicker, but this zip has the added bonus of having the XZ3 Settings.apk included. (Stock XZ3 settings.zip also supplied) FLASH IN RECOVERY
Modified Settings: https://mega.nz/#!qF4gBazC!R4hoXd_1fEOCxwrrttpXRR0CBCO9A3L8QZq3y3A-NEY
Stock Settings: https://mega.nz/#!HQwSSCAC!T3rPbcPLCCVVcMVCZGk3cDKp6DreHtjVYxEcRer3ORQ
The Rounded Recents zip has a modified SystemUI.apk that has (surprisingly) rounded recents modified into the apk. I have also pushed all the right side status bar icons across a little and shortened the space between the data icon and the battery (stock SystemUI.apk zip supplied). FLASH IN RECOVERY
Modified System UI: https://mega.nz/#!iQ4URIzJ!ssb0Wn7rXfqdU9ll3PWGp6Ba7Qx7rfnzH_QxHocEOV4
Stock System UI: https://mega.nz/#!qEpQwIYT!6QDuEWPHiWT111ah2X39z2UzcXvpmEqO2KlAnNpnA_E
The G8141 build prop zip has a build prop modified to say G8141 for those picky (like me) and don't like seeing G8142 in about phone. If you have a G8142, ignore this whole bit about build.prop. Unzip the file and move the file with a root explorer to /system and apply R-W-R-R permissions and reboot.
G8141 Build.prop: https://mega.nz/#!WBwklSCZ!3AfXbN6JmsE0eihgx8Rn7O7deEnbz2KW048WLUm4Grc
MAKE A BACKUP FIRST MAKE A BACKUP FIRST MAKE A BACKUP FIRST
Last but not least, is the Deodex patch for this ROM. Expect lengthy boot time first go, and then longer than usual every time after that. If you flash this zip, your keyboard will be removed, unless you have a keyboard already installed from the Play Store. YOU WILL HAVE NO KEYBOARD AFTER FLASHING THIS ZIP UNLESS YOU ALREADY HAVE ONE INSTALLED FROM THE PLAY STORE! YOU HAVE BEEN WARNED! TWICE!!!
Deodex Patch: https://mega.nz/#!mdhmnKwS!POI9MLzZRH9g4isgy0XCZLIhYmu6pUAnZwlXcgaM2xM
And a Patched Services.jar Magisk Module. Flash in Magisk and reboot.
306 Patched Services.jar.zip: https://mega.nz/#!LYpyHQyD!Ka21OVx-yWIM1WUb-WQLoLoJEGOZItz7V_BQMz6fbsk
Enjoy
Click to expand...
Click to collapse
can you explain the step how to deodex the pie ??
rizky_zulfikar said:
can you explain the step how to deodex the pie ?
Click to expand...
Click to collapse
All is explained here brother
https://forum.xda-developers.com/android/general/toad-source-android-deodexer-t3848307?nocache=1
Beetle84 said:
All is explained here brother
https://forum.xda-developers.com/android/general/toad-source-android-deodexer-t3848307?nocache=1
Click to expand...
Click to collapse
i've tried that tool, but my priv-app and framework fail to deodex there still odex and vdex file, only my app ?
Hey just downloading, what rom is this or based on what rom, deodexed xperia rom or custom rom, which kind, sory missed this, thank you
stipi69 said:
Hey just downloading, what rom is this or based on what rom, deodexed xperia rom or custom rom, which kind, sory missed this, thank you
Click to expand...
Click to collapse
Its a slightly modified stock rom, based on .306 dual sim Pie firmware. The rom is odexed.
I have it flashed root working, looks nice, refreshing and snappy, i guess xzp does not have hardware side sensors but you can still tap on edge of screen and bring side menu out , nice!!!
I love new camera look, huge icons in pull down menu.... not so much, haha , it is a matter of gettin use to it i guess
Great work, thanks
If you cannot flash 47.2.A.0.306 via flashtool and get same error as i did below download and copy next file:
downloaded "47.2.fsc" file to: username/.flashtool/device/G81XX, delete 47.1.fsc
https://drive.google.com/file/d/1hZR...w?usp=drivesdk (not my work in this link, credits to xda user xrenoix)
Hi, i get error in flashtool, somoene else same error?
28/048/2018 13:48:07 - INFO - Start Flashing
28/048/2018 13:48:07 - INFO - Parsing boot delivery
28/048/2018 13:48:07 - INFO - Found a boot delivery
28/048/2018 13:48:07 - ERROR - No flash script found. Flash script is mandatory
28/048/2018 13:48:08 - INFO - Sending Sync
28/048/2018 13:48:09 - INFO - Sync status : OKAY
28/048/2018 13:48:09 - INFO - Sending powerdown
28/048/2018 13:48:09 - INFO - powerdown status : OKAY
28/048/2018 13:48:11 - INFO - Device disconnected
old .270 rom flashes with no problem
XZ3/XZ2 systemui.apk Sony Loops Clock/ Ambient/ Night Mode port to XZ3 All functions
You need several attempts. I know the description is not simple. Try! All functions currently work Only not double tap to wake
Thanx for http://bbs.gfan.com/android-9527088-1-1.html
https://forum.xda-developers.com/xp...enz-pie-v1-0-0-26-11-18-t3871854/post78281536
OneHand/Night Mode and XZ2 premium systemUI in zip XZ3 systemUIS has rounded corners It looks weird Better XZ2
Indashio said:
XZ3/XZ2 systemui.apk Sony Loops Clock/ Ambient/ Night Mode port to XZ3 All functions
You need several attempts. I know the description is not simple. Try! All functions currently work Only not double tap to wake
Thanx for http://bbs.gfan.com/android-9527088-1-1.html
https://forum.xda-developers.com/xp...enz-pie-v1-0-0-26-11-18-t3871854/post78281536
OneHand/Night Mode and XZ2 premium systemUI in zip XZ3 systemUIS has rounded corners It looks weird Better XZ2
Click to expand...
Click to collapse
Does it work for XZ1?
Thanks
unless we get gravitybox (from xposed) features, like in Resurrection Remix, i'm not moving to Pie.

Pixel Dark Boot Animation

Does anyone happen to have a flashable copy of the Dark boot animation from the Pixel that works for the Mi 9? The one from the Pixel Experience ROM would be perfect, but I have no idea how to extract it myself.
groverXIII said:
Does anyone happen to have a flashable copy of the Dark boot animation from the Pixel that works for the Mi 9? The one from the Pixel Experience ROM would be perfect, but I have no idea how to extract it myself.
Click to expand...
Click to collapse
use mt manager (recommended) apk or some root explorer
then go to the route
system / prouct / media
and there it is.
copy to your internal memory or insert what I send
remember, you must install magisk from twrp and give root permission to the root browser and do this
-Angel said:
use mt manager (recommended) apk or some root explorer
then go to the route
system / prouct / media
and there it is.
copy to your internal memory or insert what I send
remember, you must install magisk from twrp and give root permission to the root browser and do this
Click to expand...
Click to collapse
Perfect! Thanks for the help!

Categories

Resources