Database Users

[Kernel] 2.6.32.48 - OC-UV-VFP_FP (1.400GHZ) - Gtab/Zpad (Update 11/24/11)

[Kernel] 2.6.32.48 - OC-UV-VFP_FP - Gtab/Zpad
-Initial release for Viewsonic’s Gtablet/Malata Zpad
-merge up to nvidia’s 10.9.9
-merge up to Kernel.org’s 2.6.32.48
-add NTFS (w./ write support (proceed with caution if writing!)),AUFS,CIFS,FUSE,TUN,HFSPlus,NFS Client v3/4 (kernel modules; pull the desired module from lib-2632.48.tar.gz and place in to /system/lib/modules/2.6.32.48-cyanogenmod/ and use insmod to insert) and EXT4 (in-built)
-DM_CRYPT/Ciphers/Routines,Cgroups,Namespaces support,Errata’s 430973,458693,460075
-ondemand governor default
-tweak cpufreq_ondemand a bit (use values from vision-2632)
-cortex-a9/vfp cc -O1 optimisations, using CodeSourcery’s 2009q1-203 ARM-EABI toolchain
-pull in a few changes from vision-2632
-use bcm4329, Version 4.218.248-23, FW Version 4.218.248-18
-add MP/PPP/TP/OE and USB Serial,IPV4/6,Netfilter, and Queuing options
-oc to 1.4GHZ; min mv: 900, max mv: 1200
-reduce voltages
-statically compile koush’s anykernel for use with harmony/tegra2, and add an unpackbootimg script
http://droidbasement.com/db-blog/
http://github.com/pershoot/gtab-2632

pershoot said:
[Kernel] 2.6.32.27 - VFPv3_FP - Gtab
-add ondemand,interactive,userspace cpu governors (ondemand default)
-tweak cpufreq_ondemand a bit (use values from vision-2632)
Source:
http://github.com/pershoot/gtab-2632
Click to expand...
Click to collapse
so do we have overclocking yet?

babybacon said:
so do we have overclocking yet?
Click to expand...
Click to collapse
not yet. its on my list (to pick apart dvfs/nvodm and backport AOSP's frequency scaling, etc.).

Thanks pershoot!
We appreciate all of the hard work you are putting into this!

pershoot said:
not yet. its on my list (to pick apart dvfs/nvodm and backport AOSP's frequency scaling, etc.).
Click to expand...
Click to collapse
that sounds awesome. good luck with it man. maybe you will get it done by the time mine gets rma'd.

Nice, thanks pershoot!

Thanks a lot pershoot! Great work here

clemsyn - we also now know have a nice template to properly package a kernel in a standalone ZIP updater rather than just reflashing the entire boot partition.

Well done.

Pershoot - am running your kernel currently with Vegan Beta 5.1, everything looking good. Just one issue so far - I get error -18 on installing from Market apps that attempt to install to SD (Angry Birds, Uniwar are the two games I install that always do this).
VSC and I identified this as an issue with CONFIG_BLK_DEV and CONFIG_BLK_DEV_LOOP not being enabled in the code Viewsonic shipped (as well as some related crypto stuff that the loop device needs). See my post with the config file changes (patch for Viewsonic 10.8.2 stock kernel) and the thread in general over at: http://forum.xda-developers.com/showpost.php?p=10168177&postcount=5
Not sure if those config options are enabled in your code base, could also be some of the related crypto options though?
I started with a clean install of Vegan Beta 5.1, freshly re-partitioned SD card last night, and flashed your kernel this morning, so there was no user data or anything else sitting around on my internal SD card to muck up my results.
EDIT: I'm browsing your repo right now and looking at your pershoot_tegra_harmony_android_defconfig file. It looks like you have the CONFIG_BLK_DEV and CONFIG_BLK_DEV_LOOP stuff enabled. Maybe it's the CRYPTO_ZLIB_DEFLATE and CONFIG_CRYPTO_DEFLATE settings? Those were in my patch but not enabled on your kernel, not sure if those are needed. Or CONFIG_BLK_DEV_CRYPTOLOOP, though that wasn't enabled on my kernel either, and from what I just read about that setting I don't think that's it. Maybe you'll see something obvious I'm missing here.

Thanks pershoot. Downloading now.

Rcgabriel, ill look in to it this wknd.

BTW, I have observed that in Quadrant my scores with pershoot's current kernel build average around 2250. With the stock Vegan 5.1beta, my scores average around 2450. Clemsyn's 10.9.7 kernel had a reduction in Quadrant score as well, yielding around a 2300-2350 average, so I suspect a significant portion of this change I observe with pershoot's build is related to the updates in the NVidia source tree. Not certain if Clemsyn has his kernel builds set to the default performance governor or not, so the difference in governor settings might explain the rest of the difference.
I don't really care particularly about the benchmark scores, they are obviously synthetic and not relevant to daily use and the CPU on this thing is so damned fast it doesn't really matter.
But to the extent that they might represent a reduction in performance of user apps they are significant. Still trying to ascertain if this is purely a benchmark issue or if there's any real-world impact. Not sure on that at all. Feels pretty smooth to me.
Obviously, the other side of the performance coin is battery life and I haven't run this kernel enough to assess that.

rcgabriel said:
Pershoot - am running your kernel currently with Vegan Beta 5.1, everything looking good. Just one issue so far - I get error -18 on installing from Market apps that attempt to install to SD (Angry Birds, Uniwar are the two games I install that always do this).
VSC and I identified this as an issue with CONFIG_BLK_DEV and CONFIG_BLK_DEV_LOOP not being enabled in the code Viewsonic shipped (as well as some related crypto stuff that the loop device needs). See my post with the config file changes (patch for Viewsonic 10.8.2 stock kernel) and the thread in general over at: http://forum.xda-developers.com/showpost.php?p=10168177&postcount=5
Not sure if those config options are enabled in your code base, could also be some of the related crypto options though?
I started with a clean install of Vegan Beta 5.1, freshly re-partitioned SD card last night, and flashed your kernel this morning, so there was no user data or anything else sitting around on my internal SD card to muck up my results.
EDIT: I'm browsing your repo right now and looking at your pershoot_tegra_harmony_android_defconfig file. It looks like you have the CONFIG_BLK_DEV and CONFIG_BLK_DEV_LOOP stuff enabled. Maybe it's the CRYPTO_ZLIB_DEFLATE and CONFIG_CRYPTO_DEFLATE settings? Those were in my patch but not enabled on your kernel, not sure if those are needed. Or CONFIG_BLK_DEV_CRYPTOLOOP, though that wasn't enabled on my kernel either, and from what I just read about that setting I don't think that's it. Maybe you'll see something obvious I'm missing here.
Click to expand...
Click to collapse
Just enable two fish and maybe blowfish under crypto and this should fix this (Yeh, I love to eat fish )

pershoot said:
[Kernel] 2.6.32.27 - VFPv3_FP - Gtab
-merge up to nvidia's 10.9.8
-merge up to Kernel.org's 2.6.32.27
-add NTFS (w./ write support (proceed with caution if writing!)),CIFS,FUSE,TUN,EXT4 (kernel modules; pull the desired module from lib-2632.27.tar.gz and place in to /system/lib/modules/2.6.32.27-cyanogenmod/ and use insmod to insert)
-DM_CRYPT,Namespaces support,Errata's 430973,458693,460075
-add ondemand,interactive,userspace cpu governors (ondemand default)
-tweak cpufreq_ondemand a bit (use values from vision-2632)
-cortex-a9/vfpv3 cc optimisations
-pull in a few changes from vision-2632 and enable what can be enabled, without breaking wifi (includes the wifi module shipped with tnt lite 3.10)
More details in the changelog, a full post on droidbasement.com, and Rom Manager update will follow.
Please report any issues with a last_kmsg/dmesg.
Installation:
Flash the .zip in recovery (flash tested successfully using .8 CWM).
Note:
Tested against TnT Lite (the others should work ok as well).
Download:
http://droidbasement.com/gtab/kernels/2632/1/boot-cm_2632.27-xtra-vfpv3_fp.zip (right click -> save as)
http://droidbasement.com/gtab/kernels/2632/1/lib-2632.27.tar.gz (kernel modules) (right click -> save as)
If you want to flash back to the stock TnT Lite 3.10 Kernel and Wifi Module:
http://droidbasement.com/gtab/boot-stock-tntlite_v3.10.zip (right click -> save as)
Source:
http://github.com/pershoot/gtab-2632
Click to expand...
Click to collapse
Is there a versionfor vegan 5.1?

Rchabriel,
Not done yet. I have more tweaks patches to bring in. Possibly some revertions as well. Wanted to get a baseline out. Remember benchmarks are just that, synthetic. Tnt lite flies thus far. Have not tested against vegan at all. Want to test on close to stock and/or cyanogenmod at this point.
Battery is good. About 1%/h idle (no sync).
Clemsyn,
Ok I may have missed over the options (was late when I posted). Thx.
Robz,
Yes.

So if im running Vegan 5.1, and im Not a dev, is there anything I can do with this new release?

Quadrant scores dropped from 3300+ to 2900+ with this kernel. I've got the data2loop patch installed.

NMCBR600 said:
Quadrant scores dropped from 3300+ to 2900+ with this kernel. I've got the data2loop patch installed.
Click to expand...
Click to collapse
Pin your cpu to 1000 and rerun.
I am not using performance (default shipping). The cpu freq. will scale dynamically with load as needed (ondemand is default).
Don't worry too much about synthetic benchmarks. They mean little in real world.

pershoot said:
Don't worry too much about synthetic benchmarks. They mean little in real world.
Click to expand...
Click to collapse
I agree

[DISCUSSION-TEST][25 JULY]CPU Governors and I/O Schedulers in DooMLoRD's Kernels

Since the moment that most of x10 users are using custom kernels and our devs are working hard to add new features and add-ons, i think that this thread can be a good place for most of us,like me, that would like to know much more about technical specs and options and for all devs, like a place for reporting experiences and give suggestions.
Before starting..
ALL CREDITS AND MANY THANKS TO:
- zdzihu for providing us custom kernels and for all his hard work in x10 development
- DooMLoRD for modding and adding new features and helping us with kindly support
Link to Z’s kernels: http://forum.xda-developers.com/showthread.php?t=1135475
Link to DooMLoRD’s kernels: http://forum.xda-developers.com/showthread.php?t=1172200
In the last few days, DooMLoRD has worked over his kernel ( v03) in order to add new I/O scheduler types and new CPU governors and he has let us the possibility to choose all settings we want and prefer (according with his kernel’s name “Power to the people”). So now, the objectives of this thread are:
-Post and link information about scheduler and cpu governor types
-Post tests, opinions, comparisons and suggestions about differences between them and over different ROMs
So standard posting form should be as below:
Kernel type ….(including max OC frequency used)
ROM and baseband version …
…all that you want regarding cpu governors and schedulers… ( benchmark tests are very appreciated )
Here, there are some starting and basic information:
http://en.wikipedia.org/wiki/I/O_scheduling
http://www.mjmwired.net/kernel/Documentation/cpu-freq/governors.txt
I hope this thread can be useful for all and may become a way of improving our experiences with the x10!!
Best regards
Kekko

my phone wroks fine @ 1152 with doom's kernel v3 x series (UNDERVOLTED)
@1152 interactive governer is the fastest and doesn't drain the battery. smartass though i think it's less battery consuming but is laggy.performance governer: wlod after a pretty time
@1190 smartass:so laggy and can't use it. interactive &performance :reboot
what's strange for me here is that with WB cust. kernerl 4.0.3 phone reboots always @1113 and didn't be stable till i reduced the MAX frequency to 1036
now with doom's kernel it's stable @1152 is that because of undervoltage?!! and if so..can i reach @1228 with more UV ?!!
for me i didn't use the s series (same kernel with stock voltage) so can't decide

I got error: "failure at line 1: copy_dir package: system system: installation aborted" when flash Doomkernel v4b for lockbootloader. Can u help me to fix it?

Yeah sometimes you get errors but still the kernel gets installed
Go to Settings-> about phone and check the kernel version

How about others added in v6 of doom's kernel
such as: smartassV2,interactiveX and etc..

eh_hk said:
How about others added in v6 of doom's kernel
such as: smartassV2,interactiveX and etc..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=20797923
Sent from my X10i S

Khaon's Kernel and GPU overclock.

Hi and welcome on forum.
I in this forum quite while but only just for read and collecting information.
I have Nexus 10 with AICP 6.0.1. To unlock potential of this tablet i install custom kernel from @Khaon.
In first post its stated:
- UV and OC both for the GPU AND CPU supported
Unfortunately i can only increase CPU speed as well as CPU voltage.
I don't have option to change GPU frequency.
To do this im using "Kernel Adiutor".
Can you help me with my question??
Regards

HipHopAst said:
Hi and welcome on forum.
I in this forum quite while but only just for read and collecting information.
I have Nexus 10 with AICP 6.0.1. To unlock potential of this tablet i install custom kernel from @Khaon.
In first post its stated:
- UV and OC both for the GPU AND CPU supported
Unfortunately i can only increase CPU speed as well as CPU voltage.
I don't have option to change GPU frequency.
To do this im using "Kernel Adiutor".
Can you help me with my question??
Regards
Click to expand...
Click to collapse
Sorry for the late reply.
it is normal you don't see anything in kernel audiutor because :
1) latest kernel of mine( marshmallow) was started from scratch and I didn't add gpu support
2) kernel audiutor 's design doesn't allow to easily include gpu control for our device. The easiest solution i could find was to edit some init.d script.
Now that I got more time I will include again my gpu patches so gpu full control is back

[EOL] [KERNEL] [OnePlus3] [Lineage15/Lineage14/CM13] Boeffla-Kernel (01-03-2019)

Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus One, OnePlus Two, OnePlus X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Now I own a OnePlus 3 device and decided to port my kernels also to this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
Make sure you flash the correct kernel version, depending on whether you really use CM or a different OS !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Compatibility
Important: This kernel is only meant to be compatible with official Cyanogenmod and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
Click here to learn about using the config app (quite outdated, as it is focused on S3 still).
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for LineageOS 14.1 kernel - Click here
Change log for CM13 kernel - Click here
Features
Note: This kernel only runs on LineageOS for the OnePlus 3 - nothing else !!!
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.02 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand, blu_active
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, zen, maple
CPU overclocking - one additional overclocking step for both clusters (1,72 GHz for little CPU / 2,26 GHz for big CPU)
No GPU overclocking, no CPU and GPU voltage interface
USB charge rate bumped up to 900 mA
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
CPU core profiles to restrict number of CPU cores being used (the OP3 does not hotplug based on load)
Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2wake gestures
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys are locked as long as screen is in use (touched) for better usability
Swap supported
Various minor kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.24.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest LineageOS kernel sources (http://github.com/LineageOS/android_kernel_oneplus_msm8996)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are using Lineage/CM or another rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.4.02 or higher for the OnePlus 3 Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi

Latest change log:
LineageOS 14.1:
http://kernel.boeffla.de/oneplus3/boeffla-kernel-cm/cm14.0/changelog.htm
CM13:
http://kernel.boeffla.de/oneplus3/boeffla-kernel-cm/cm13.0/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-3/how-to/profiles-boeffla-kernel-profiles-t3455503

*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi

OH MY GOD!
Grüße aus Potsdam

Allright folks, thread is open. Kernel is available for download.
Before you start, please make sure you read the following information at least:
http://boeffla.de/index.php/support/installation-how-to
http://boeffla.de/index.php/support/support
If you have trouble, I ask you to also scan for your issue in the OnePlus 2 thread, as major parts are the same on both devices (http://forum.xda-developers.com/one...rnel-boeffla-kernel-5-0-alpha8-11-04-t3357167)
Enjoy
Andi

Thank you Lord for bringing Christmas to us!

yay downloading, gonna flash direct and test thank u sir

@Lord Boeffla Confirmation number: 8EE21419AG5941220
Thank you Lord Boefla for this awesomeness!!!

Oh yes. The old master is here.
Waiting for CM snapshot bugfixes and then it's gonna roll.

can't wait to get my op3

AWESEOME THANKS FLASHED IT ON Ressurection Remix rom and its working awesome

Awesome!!! I'm really happy to see Boeffla Kernel on OP3. I used his kernel on my S5, but recently I got my OP3. I tried to install this kernel on CM13 by arter97 but it failed in recovery (Error 1......). Any ideas?

xantic21 said:
Awesome!!! I'm really happy to see Boeffla Kernel on OP3. I used his kernel on my S5, but recently I got my OP3. I tried to install this kernel on CM13 by arter97 but it failed in recovery (Error 1......). Any ideas?
Click to expand...
Click to collapse
Use official CM13.
Also, read that we need at least some more information:
http://boeffla.de/index.php/support/support
How should we help without knowing where what went wrong...
Andi

Flashed on blackjubel RR and booted
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A3003 using Tapatalk

Lord Boeffla said:
Use official CM13.
Also, read that we need at least some more information:
http://boeffla.de/index.php/support/support
How should we help without knowing where what went wrong...
Andi
Click to expand...
Click to collapse
Thanks Andi for your answer. I thought CM13 by arter97 is really close to official CM13

is it possible to revert the cm13 stock kernel back if something goes wrong or i want to change my mind ?
btw. i got cm13 snapshot installed

Playa82 said:
is it possible to revert the cm13 stock kernel back if something goes wrong or i want to change my mind ?
btw. i got cm13 snapshot installed
Click to expand...
Click to collapse
Yes, dirty flash CM13 again and you are back to stock kernel.
Andi

Playa82 said:
is it possible to revert the cm13 stock kernel back if something goes wrong or i want to change my mind ?
btw. i got cm13 snapshot installed
Click to expand...
Click to collapse
Take a back up ot the boot image in recovery and you're ready.

Lord Boeffla said:
Yes, dirty flash CM13 again and you are back to stock kernel.
Andi
Click to expand...
Click to collapse
ok cool. thx for your info

Working fine on latest oos.

[KERNEL] [EOL] [OnePlus3] [OOS 5, 4, 3] Boeffla-Kernel (15-01-2019)

*** This kernel is now end-of-life, not supported and developed anymore !!! ***
Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus One, OnePlus Two, OnePlus X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other, good existing kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Compatibility
Important: This kernel is only meant to be compatible with official OnePlus OOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
To add: An open beta (aka community build) is NOT an official build supported here. If you use a community build and have issues, don't complain or even report. I am not merging any kernel changes from open betas into my kernels !!
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
This kernel is ONLY compatible to OxygenOs stock, nothing else !!!
If you are using a custom rom that bases on OxygenOs, it might work. However, if it does not work, do not expect me to do tweak to make the kernel running with your favorite rom. I would not do it - my one and only reference is OxygenOs stock.
It is not supposed to be compatible to CM, HydrogenOS etc.
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (outdated at the moment).
Click here to learn about using the config app (outdated at the moment).
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for OxygenOS 4.x.x kernel - Click here
Change log for OxygenOS 3.x.x kernel - Click here
Features
Note: This kernel only runs on OOS 3.x.x for the OnePlus 3 - nothing else !!!
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.02 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand, blu_active
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, zen, maple
CPU overclocking - one additional overclocking step for both clusters (1,72 GHz for little CPU / 2,26 GHz for big CPU)
No GPU overclocking, no CPU and GPU voltage interface
USB charge rate bumped up to 900 mA
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
Boeffla touchkey LED control (LEDs fully off, LED on screen touch, configurable duration)
CPU core profiles to restrict number of CPU cores being used (the OP3 does not hotplug based on load)
Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2wake gestures
Control haptic feedback of gestures (except fingerprint)
Haptic feedback intensity control
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys are locked as long as screen is in use (touched) for better usability
Swap supported
Various minor kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.27.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest OOS kernel sources (https://github.com/OnePlusOSS/android_kernel_oneplus_msm8996)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
f2fs - it is known to cause various issues and compatibility problems
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the kernel only if you are running a compatible rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.4.02 or higher for the OnePlus 3 Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi

Latest change log:
OOS4
http://kernel.boeffla.de/oneplus3/boeffla-kernel-oos/oos4xx/changelog.htm
OOS3
http://kernel.boeffla.de/oneplus3/boeffla-kernel-oos/oos3xx/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-3/how-to/profiles-boeffla-kernel-profiles-t3455503

*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi

Allright folks, thread is open. Kernel is available for download.
Before you start, please make sure you read the following information at least:
http://boeffla.de/index.php/support/installation-how-to
http://boeffla.de/index.php/support/support
If you have trouble, I ask you to also scan for your issue in the OnePlus 2 thread, as major parts are the same on both devices (http://forum.xda-developers.com/oneplus-2/orig-development/kernel-boeffla-kernel-05-10-2015-t3218164)
Enjoy
Andi

It's going to be legen. Wait for it. Dary
Thanks Dev for supporting OP3
Downloading rn

Awesome ... Thanks for this ....

Great work..
To restore old kernel stock..is it possible to have it too??
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

isoladisegnata said:
Great work..
To restore old kernel stock..is it possible to have it too??
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Let me create a stock kernel section for it on www.boeffla.de, then yes. But this can take till tomorrow, I am out very soon today.
Apart from that, you can always flash OOS dirty over, this brings you stock kernel back.
Andi

Lord Boeffla said:
Let me create a stock kernel section for it quickly on www.boeffla.de, then yes.
Apart from that, you can always flash OOS dirty over, this brings you stock kernel back.
Andi
Click to expand...
Click to collapse
Yes..
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

isoladisegnata said:
Yes..
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Just corrected my statement, will not be before tomorrow as I have to leave very early today for an appointment.
Andi

hail to the lord of kernels

isoladisegnata said:
Great work..
To restore old kernel stock..is it possible to have it too??
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
With Flashify you can backup and restore the stock kernel.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

Der-Knuffi said:
With Flashify you can backup and restore the stock kernel.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
Yeees, but... not 100%.
IMHO it backups the kernel image, but not the kernel modules too.
And OnePlus is using kernel modules on OOS.
Just to be very precise.
Andi

its not yet available to download?

tatuboy said:
its not yet available to download?
Click to expand...
Click to collapse
What?
And why should it be not?
Be more specific pls.
Andi

Download of OOS kernel working here.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

It finally happened
OMG.
Now I have no excuses anymore to not buy a Oneplus 3.
So it was a short interruption without Boeffla on LG G4 (5 months)
Many, many thanks for this.
Hail to Lord Boeffla. I can not live without your kernels
Greetings and keep calm.

Some got the app working on 3.5.1?

C.H.T.J. said:
Some got the app working on 3.5.1?
Click to expand...
Click to collapse
Same here, not working boeffla config in OSS 3.5.1... The kernel is very good, smooth, but the apk isn't working yet...
Good job bro, your kernel is awesome..
Sent from my ONEPLUS A3003 using Tapatalk

What is your webpages
Code:
http://kernel.boeffla.de/oneplus3/boeffla-kernel-oos/oos3xx_download/Stable
wrong with the ESET antivirus selectively alert immediately and does not reach the website.
Indicates that the page is harmful.