Related
Hey guys, having some issues with my P8 lite which is recently purchased and is a great phone. I rooted it, and played around (as you do) installed busybox and played with apt-get and, well messed it up haha. Basicly I just want to unroot, stock reset the phone and start from scratch.
So, my question is.
Do I need to reinstall the firmware (ROM) in order to unroot?
And where can I get a stock fw for the P8 Lite ALE-L02, the original firmware to reflash? Can I flash the L21 on the L02?
Thanks
Quick question, found this guide.
http://forum.xda-developers.com/p8lite/help/stock-rom-huawei-p8-lite-t3125331
Can flashing this ROM carrier lock me?
For those of you after a ROM in NEW ZEALAND
http://consumer.huawei.com/nz/mobile-phones/support/downloads/huawei-p8lite-nz.htm
Hi
I also have a new phone but have one minor issue with it.
the edge of the phone is blinking red - a red square is blinking when the cpu is working a bit more i guess.
it is really anoying and i would like to disable this. do not know if it was from the start but i reckon it wasnt.
please help
Hello guys; when I use WhatsApp Camera, despite the volume to minimum and the silent/vibrate mode on when I take a picture you will hear the shutter sound; This is annoying for me, how could I solve this problem? Am I the only one with this problem? (lol)
Hii..guys help me.
My HUAWEI p8lite
Wifi and hotpost speed is too slow some guys please help me
Can i install Vodafone firmware and use any carrier
HaiderHady said:
Can i install Vodafone firmware and use any carrier
Click to expand...
Click to collapse
Yes. Because a brand/carrier firmware is maked by stock rom + carrier's apps
Antox97 said:
Yes. Because a brand/carrier firmware is maked by stock rom + carrier's apps
Click to expand...
Click to collapse
Thanks brother ?
Hello boss how you rooted p8lite
I am unlocked my boot loader and install twrp but cannot rooted please tell my mail:[email protected]
Hi all,
Recently, I go through this forum and found there are many custom roms ready for this Le Pro3 phone. After consider the hardware specification and cost, finally I procured Le Pro3 (x720) phone.
However, when I received this phone, I found the latest EUI already installed (EUI 5.9.026s). When I go through the instructions provided by XDA forum, I found there almost no way to unlock the bootloader of this phone if this came with EUI 5.9.026s.
Can someone tell me if there is a way to unlock this bootloader if this phone is came with EUI 5.9.026s? If not, can I still can refresh my phone with some custom roms (like Omni rom on lineage OS?)
Thanks
I have no trouble with my x720, first time flashed customs on 20s, but few days ago returned from stock 26s to custom. Can't you unlock your phone?
No luck on unlock.
I believe you already installed TWRP before upgrade to 26s, so you can falsh back to previous version.
Have you official ROM and followed the unlock guide?
I follow the unlock Guide but no luck. I go through few discussion in XDA forum, seems some major changes in OS permission settings on 26s rom
Maybe flash 23s, wipe then try?
I cannot try it, but maybe it's possible to fool the update system. By modifying the update script of a 23s OTA file you can bypass the check for rom and modem version, then the system will execute a "downgrade" from 26s to 23s. This theorically, I can't try if it really works but the right path can be this! Cheers!
Sent from my LEX720 using XDA Labs
I did downgrades from 20s to 18s and from 23s to 20s... Seems buggy, but after wipes worked perfectly.
@marik1
How did you do the downgrade? Is the way you downgraded possible with a locked bootloader? Thank you.
(I am considering buying a Le Pro 3, but I will probably wait until I know that unlocking the bootloader is possible with the new EUI installed.)
For me it's simply flashing file with ROM called "update.zip" and placed into main folder trough LeEco's recovery. Like making update, but with different file.
I tested qfil by following the thread here to flash the previous rom but no luck, when I use qfil, I am quite sure the phone is connected ( I can see the com port), the process started(rom are unzipping), but when the system try to write on the disk, the process failed. I wonder if there are any permission/encryption settings applied on the partition of 26s rom, and not sure if I can downgrade due to partition permission.
BTW, where can I download 23s rom? and how to modify the script to prevent version check? thanks
marik1 said:
For me it's simply flashing file with ROM called "update.zip" and placed into main folder trough LeEco's recovery. Like making update, but with different file.
Click to expand...
Click to collapse
Where to download this file? and the file should place on main folder but not root folder, right?
Just flash it, without changing version checking. You can take it from LeEco website;
https://bbs.le.com/zt/eui/le_pro3.html
You can also have trouble with connect, so you have to remove :110 from link and you gain;
http://107.155.49.13/222/8/95/scmau...e=0&vrtmcd=109&buss=60001&cips=159.205.89.106
Developer options，unlock OEM
Can someone confirm that unlock works for new devices which are shipped with the new software version? @andylcm please let us know if you get it working. thanks
nomailing said:
Can someone confirm that unlock works for new devices which are shipped with the new software version? @andylcm please let us know if you get it working. thanks
Click to expand...
Click to collapse
the problems have been fixed.
Actually, I follow the unlock guide here, the problems was on this bootloader unlock guide but not on the phone itself.
@andylcm
Could you please explain what you did differently from the guide?
Is this the guide you are referring to? https://forum.xda-developers.com/le-pro3/how-to/leeco-le-pro-3-root-t3476560
I know that device info command shold be device-info
Hi everyone
I bought ZTE Axon 7 (A2017G) from Italy Amazon
it is running MM 6.0.1 (Mifavor 4.0 version B11)
there is no OTA updating
so I want to manual update to Nougat last version for my region
then getting TWRP, Magisk, Xposed
but there's alot of guides here with a lot of roms with deference regions confuse me!
so what guide should I use, and what rom should I use
is there need to unlock bootloader , is that will losing me any feature like dolby ?
am2006 said:
Hi everyone
I bought ZTE Axon 7 (A2017G) from Italy Amazon
it is running MM 6.0.1 (Mifavor 4.0 version B11)
there is no OTA updating
so I want to manual update to Nougat last version for my region
then getting TWRP, Magisk, Xposed
but there's alot of guides here with a lot of roms with deference regions confuse me!
so what guide should I use, and what rom should I use
is there need to unlock bootloader , is that will losing me any feature like dolby ?
Click to expand...
Click to collapse
The guide from Controllerboy works perfect ( advice read it more than once ) , the axontoolkit works too.
If you decide to go with custom rom you will loose ZTE Dolby,
but viper works good, but there are debloated stock roms which you can use with Dolby and root.
Unlocking the bootloader is always helpful, if you decide to use custom recovery and root, because if you mess up anything you're mostly lost with a locked bootloader.
Unlocking the bootloader will completely wipe your phone, better you copy your important stuff to PC.
If you just want to update your phone copy the latest official
firmware to the external SD card and use the update function.
coremania said:
The guide from Controllerboy works perfect ( advice read it more than once ) , the axontoolkit works too.
If you decide to go with custom rom you will loose ZTE Dolby,
but viper works good, but there are debloated stock roms which you can use with Dolby and root.
Unlocking the bootloader is always helpful, if you decide to use custom recovery and root, because if you mess up anything you're mostly lost with a locked bootloader.
Unlocking the bootloader will completely wipe your phone, better you copy your important stuff to PC.
If you just want to update your phone copy the latest official
firmware to the external SD card and use the update function.
Click to expand...
Click to collapse
thanx, I red it, but it's said i must be on MM B10 at most, and I am on MM B11, also there is no guide for downgrade, also there is no guide for upgrade , in present, I just want to try stock rom on last Nougat version with twrp, magisk & xposed, so Am I need to unlock bootloader on MM 1st?, or I can upgrade to N then doing all of it?
am2006 said:
thanx, I red it, but it's said i must be on MM B10 at most, and I am on MM B11, also there is no guide for downgrade, also there is no guide for upgrade , in present, I just want to try stock rom on last Nougat version with twrp, magisk & xposed, so Am I need to unlock bootloader on MM 1st?, or I can upgrade to N then doing all of it?
Click to expand...
Click to collapse
This is a bit outdated, you can follow the guide on mm or n, doesn't matter. No need to down or upgrade before.
---------- Post added at 18:55 ---------- Previous post was at 18:49 ----------
After you did the unlock, the twrp update and flashed the Los thread bootloader + modem you can use this rom, guess this is what you want:
https://forum.xda-developers.com/axon-7/development/rom-slim-version-t3669355
coremania said:
This is a bit outdated, you can follow the guide on mm or n, doesn't matter. No need to down or upgrade before.
Click to expand...
Click to collapse
OK, but which last Nougat version for my region?, which rom can I use
am2006 said:
OK, but which last Nougat version for my region?, which rom can I use
Click to expand...
Click to collapse
Linked in last post
@am2006 it seem strange that you don't receive OTA update. It is seem that the seller had done something with the phone (properly install A2017G on A2017 chinese model). Before doing anything, you must know you model, cause A2017G brick is pretty hard to fix
tamahouse02 said:
@am2006 it seem strange that you don't receive OTA update. It is seem that the seller had done something with the phone (properly install A2017G on A2017 chinese model). Before doing anything, you must know you model, cause A2017G brick is pretty hard to fix
Click to expand...
Click to collapse
No I think the last update in Italy is MM, but I'm not sure, the device is new and I check the model and SN on the mobile and its cartoon, it is matching
am2006 said:
No I think the last update in Italy is MM, but I'm not sure, the device is new and I check the model and SN on the mobile and its cartoon, it is matching
Click to expand...
Click to collapse
I recommend using stock Nougat. Stock ROM has pretty good camera, Dolby, DAC which you will missing when using custom ROM. (Stock MM is bit crappy, ZTE has fix a lot after several update).
Beside, RR is very good custom ROM.
Official Xposed does not support Nougat yet, there is an unofficial one but not work with stock Nougat, I haven't try on RR
tamahouse said:
I recommend using stock Nougat. Stock ROM has pretty good camera, Dolby, DAC which you will missing when using custom ROM. (Stock MM is bit crappy, ZTE has fix a lot after several update).
Beside, RR is very good custom ROM.
Official Xposed does not support Nougat yet, there is an unofficial one but not work with stock Nougat, I haven't try on RR
Click to expand...
Click to collapse
thanx, what about LineageOS, is it support Dolby, magisk?
am2006 said:
thanx, what about LineageOS, is it support Dolby, magisk?
Click to expand...
Click to collapse
There are multiple iterations of Dolby made as a Magisk module. Magisk works perfectly on both LineageOS and Stock rom.
Moto M nougat 7.0 stock ROM with Google apps, playstore and multilanguage
https://drive.google.com/open?id=0B2qnxzTijG5YeFoyZEdPeEFKa3c
orbirixx said:
Moto M nougat 7.0 stock ROM with Google apps, playstore and multilanguage
https://drive.google.com/open?id=0B2qnxzTijG5YeFoyZEdPeEFKa3c
Click to expand...
Click to collapse
The file is XT1663_USR_S356_1706211351_mp7V1_ROW_target_bin.7z
So it is for XT1663. Are you sure we can use in XT1662?
Is it a custom rom??
TYIA
kolomalo said:
The file is XT1663_USR_S356_1706211351_mp7V1_ROW_target_bin.7z
So it is for XT1663. Are you sure we can use in XT1662?
Is it a custom rom??
TYIA
Click to expand...
Click to collapse
Yes, it works in XT1662
orbirixx said:
Yes, it works in XT1662
Click to expand...
Click to collapse
I have read in russian forum that flashing eu version with xt1662 rom would lose imei. How can i known flashing xt1662 with xt1663 rom will not be wrong?
I buyed my phone on ebay. Model is xt1662 but some system apps version is 6.0_xt1663_s096..... seller told me is a Chinese version but prepare to overseas... what do you think? Do you have the same and tried it?
Some Motorola forums reports some bugs in Nougat, so i found xt1663_usr_s356_1706211351_mp7V1-ROW and i want to flash it but I'm afraid of brick my phone.
Thank you so much.
Please Custom ROMs Moto M xt1662 or 1663. Android 8.0 Oreo
IMEI issue
I live in Canada, I got this xt1662 from China. No luck with installing google play at all. The xt1663 rom works for the xt1662 phone, however, the IMEI is not working at all. I cannot make phone call at all.
I have the same problem, could you solve it?
Apparently it's a matter of luck ... My moto M that came from China does not have any problems with the iMEI. I'm sorry if you had problems, I'm going to remove this software from here :/
orbirixx said:
Apparently it's a matter of luck ... My moto M that came from China does not have any problems with the iMEI. I'm sorry if you had problems, I'm going to remove this software from here :/
Click to expand...
Click to collapse
Don't remove it if it works for the XT1663, just remove the XT1662 par from the title and the posts.
CJ2311 said:
Don't remove it if it works for the XT1663, just remove the XT1662 par from the title and the posts.
Click to expand...
Click to collapse
Please don´t do it! - The Nougat 7.0 firmware for XT1663 (xt1663_usr_s356_1706211351_mp7V1-ROW) works very well on the XT1662! Including mobile phone network connection.
After flashing firmware the only thing is, your have to write back your IMEI´s to the NVRAM. Use the tool maui meta & the right modemdb file to find the right address pointers (= nvram database). A generic MTK 6750 modem database file are perfect, because the xt1662 & xt1663 uses a higher clock variant of thr cpu (MTK6755). Please take time and search for the right quides. It is very easy to do it
If you do not know your two IMEI´s please have a look on the shipping package. There is a label with your IMEI´s.
Just my 2 cents
Best regards.
Moto M brick
Hello, try to flash this rom with the flashtool and now it does not turn on, either in fastboot mode but the pc does recognize it although it does not install the rom correctly.
Please help me to relive it.
Thank you
Is there any custom ROM for Moto M, thanks in advance.
cimfcmw said:
I live in Canada, I got this xt1662 from China. No luck with installing google play at all. The xt1663 rom works for the xt1662 phone, however, the IMEI is not working at all. I cannot make phone call at all.
Click to expand...
Click to collapse
Same Issue, got the phone from GB in China, now after flashing it won't connect to Fido or Bell, how you got it fixed, cause I haven't
I flashed xt1663 fw in xt1662, but erased imei and maui meta dont recognize the cell. Baseband is unknown.
Very good, yerstaday I flashed my xt1662 this firmware. Yes, IMEI erased. I did backup nvram.img and nvdata.img
and flashed it back after install Android 7. Work done. Previous Android 6 is suxx.
I can write link for restoring IMEI.
Eu instalando essa Rom meu XT1662 perde 1GB de RAM?
S371?
kolomalo said:
The file is XT1663_USR_S356_1706211351_mp7V1_ROW_target_bin.7z
So it is for XT1663. Are you sure we can use in XT1662?
Is it a custom rom??
TYIA
Click to expand...
Click to collapse
does it work onS371?
please let me know
rdaga22 said:
does it work onS371?
please let me know
Click to expand...
Click to collapse
my device is XT1662, after flash
XT1663_S371_171109_ROM
after flash with SP flashtool v5.1616.00.000 and latest mtk drivers, flash done all partitions.
This rom xt1663 working perfect in xt1662
Thanks for share!
BR
That's a really good ROM, and it's been working just fine. But where did you get it?
Hello there,
I have just received an old P9 lite - VNS-L21C432B160. I has Android 6.0 an EMUI 4. I wanted to flash a custom ROM but I am not able to. I have bootloader unlocked. I am able to instal TWRP 3.0.2-0. But all custom ROMs I tried, gave me ERROR7 or Signal 11. (It is not possible to correct Error7 according to manuals here...)
There is TWRP 3.2.1 for this phone but it doesn't work at all. I found out, it wants EMUI5.x which I do not have. Is it correct that I need to update to Nougat7 and EMUI5 first? I am trying to do it maybe 4 days already. I have tried everything which is available on the internet but I failed. I have original Stock ROM file with Android 6 - it works.. I also have update file for Android 7 (B336), but the phone doesn't want it. According to official manual, I need some kind of transfer package, which is not available.
Can anybody help me with flashing a custom ROM to this phone? I would love to have LineageOS 14.1
Thank you very much
Karel
xykarelxy said:
Hello there,
I have just received an old P9 lite - VNS-L21C432B160. I has Android 6.0 an EMUI 4. I wanted to flash a custom ROM but I am not able to. I have bootloader unlocked. I am able to instal TWRP 3.0.2-0. But all custom ROMs I tried, gave me ERROR7 or Signal 11. (It is not possible to correct Error7 according to manuals here...)
There is TWRP 3.2.1 for this phone but it doesn't work at all. I found out, it wants EMUI5.x which I do not have. Is it correct that I need to update to Nougat7 and EMUI5 first? I am trying to do it maybe 4 days already. I have tried everything which is available on the internet but I failed. I have original Stock ROM file with Android 6 - it works.. I also have update file for Android 7 (B336), but the phone doesn't want it. According to official manual, I need some kind of transfer package, which is not available.
Can anybody help me with flashing a custom ROM to this phone? I would love to have LineageOS 14.1
Thank you very much
Karel
Click to expand...
Click to collapse
Hi Karel,
use Firmware Finder app to update to android 7.
I recommend vpn/dns method.
You should point to B370 FULLOTA-MF-PV one...
All info are inside the app and some videos are on You_tu_be...
You can update the same way to latest firmware.
Good luck... :fingers-crossed:
Dude if you will succeed do not use 3.2.1 twrp, use instead 3.1.1-1 one..
Cheers
Hello Hello, thank you very much !! I was successful. The phone runs with the latest firmware now. I tried to install lineageOS 14 but I am not able to do that. I am stucked at the boot logo .. I found info: "If you stuck on boot screen, change your file system"... filesystem of what? SD card? Phone?
Thanks in advance!
Karel
xykarelxy said:
Hello Hello, thank you very much !! I was successful. The phone runs with the latest firmware now. I tried to install lineageOS 14 but I am not able to do that. I am stucked at the boot logo .. I found info: "If you stuck on boot screen, change your file system"... filesystem of what? SD card? Phone?
Thanks in advance!
Karel
Click to expand...
Click to collapse
Dude, the instructions are so old,
also i never installed LineageOS 14 on my p9 lite. (I do not have it anymore)
I can tell you to use twrp version 3.1.1-1 and I recommend posting it
in the appropriate thread, maybe other users can answer in more detail ..
Regards
Hello, I have the same problem, I want to update my android to android 9 but I didn't really find any tutorials for it, no Roms or anything else,
did you get anything bro please help me?
thanks
MaKhaleD said:
Hello, I have the same problem, I want to update my android to android 9 but I didn't really find any tutorials for it, no Roms or anything else,
did you get anything bro please help me?
thanks
Click to expand...
Click to collapse
Hello dude,
i wish to help but i think it's not possible....
anyway the best you can wish for is having android 7 stock
or some custom version of android 8.
As you wrote you have the cinese variant (G9 Youth). It should have
a different processor and need a personalized rom, can you check it ?
Go in settings, phone info...
Please report your complete firmware version
(example: VNS-L21C432B160/VNS-AL00C00B230)
and chipset version (example: Kirin 650/Snapdragon SD 617)
P.S.: You don't need to post in multiple sections.
It is also considered to be a duplicate and it is
against the rules ...