Database Users

[Q] Odin Error

i used the exe og legija to recover my i9505 so i can boot in download mode but
when i install an official firmware with pit thru odin after the flash is pass success the i9505 is dead again ...
any idea?? In the phone when start flashing is appear 3 lines in red saying:
START [240,1440]
BAR [240,1440]
END [240,1440]
any help plz thx

You are in the wrong forum. This one is for the S4 Active and its European counterpart. Sounds like you have a regular S4 as we cannot yet flash ROMs on our S4 Active phones.

No , you're in the wrong forum dude
Sent from my GT-I9505 using XDA Premium HD app

Miami_Son said:
You are in the wrong forum. This one is for the S4 Active and its European counterpart. Sounds like you have a regular S4 as we cannot yet flash ROMs on our S4 Active phones.
Click to expand...
Click to collapse
I'm pretty sure this is the regular S4 section
Sent from my Googley Sammy Jellybean

tatperson said:
I'm pretty sure this is the regular S4 section
Sent from my Googley Sammy Jellybean
Click to expand...
Click to collapse
It is, now that a mod moved the thread.

yes is an european s4 i9505
yes i am from spain this s4 i9505 is european version, from vodafone, in odin when i start download mode it says wrie protection enable and when flashing it sen the messages i say above. i use the pit and the stock fw, in odin it says it pass and all succesfull but when i try to power the phone it dont boot, and goes in qualcom mode. also when i enter in download mode at star says phone coud not do normal bot in red, like that:
could not do normal boot
odin mode
product name : i9505
Current binary sumsung oficial
System status: Custom
CSB-OEM_CONFIG _FILES_SYS: 0x30
write protection : enable

We need to know exactly what you've done to the phone in the order you've done it - firmware which was originally on the phone, any OTA updates, exactly what you flashed/in what order, what happened to the phone that made you need to Odin flash it.
Little details will be important so far as getting your phone up & running as soon as possible goes, I.E the less details you give the longer it's going to take for that to happen

MistahBungle said:
We need to know exactly what you've done to the phone in the order you've done it - firmware which was originally on the phone, any OTA updates, exactly what you flashed/in what order, what happened to the phone that made you need to Odin flash it.
Little details will be important so far as getting your phone up & running as soon as possible goes, I.E the less details you give the longer it's going to take for that to happen
Click to expand...
Click to collapse
hi, is a friend phone, he flashes with odin to install 4.3 custom(i don't know what custom he use) it fails and he brick the phone, can't no enter in recovery and can't enter in download mode, also the phone no power on, when he let me the phone for repair. Know i can enter in download mode.
First of all i try to flash a new rom custom but it says no pit partition. Then i download from sammobile a stock rom of vodafone and the pit file for the S4 i9505, i flash it with pit and the stock official rom of the terminal (re-partition mark,f.reset time mark, and autoreebot mark). Odin end and say pass. but when i try to power on the phone go again into a brick (phone, can't no enter in recovery and can't enter in download mode, also the phone no power on). i use odin 3.07 , 3.09 and 1.85 i got this versions and i try some configurations like unmark re-partition,and unmark autoreboot with the same problem. (He turn un qualcome mode). i also try to install a new recovery and the same syntoms. also when i flash any thing the phone goes to the same status all ok but no power on, no recovery and no download mode.

any ideas???

[Q] Note 3 (N900) wont turn on, recovery not accessible, RP SWREV: A4

Galaxy Note 3 N900 ​
Im not new to Odin nor rooting or even customized Roms, but this time i ran out of solutions.
I have galaxy note 3 SM-N900, it was running on 4.4.2 and i have made some modification through Xposed Installer, it is rooted as well.
it was stable and i used it without any new modification for 2 months. but yesterday its battery ran out and i didn't charge it for 5 hours after it was dead.
after recharging it, it refused to boot, it stuck on the Samsung first screen when it turns on, then it does nothing, take into consideration that the battery is charged (i have tested it on another phone).
i tired entering the recovery mode but with no luck, recovery page is not accessible. And i have noticed a weird thing that when it was turned off and plugged to the charger i usually see the big battery picture show a motion that its charging but now it shows only a picture of an empty batter without any motion.
its now showing on the download mode page "RP SWREV: A4" i have searched all the forms and the websites and i couldn't find what is the meaning of it. (picture attached)
I used odin to flash a new stock rom but it always stops on "<ID:0/011> Initialzation.." and sticks on this stage forever.
also Knox warranty was void!
Your help and support are really appreciated.

Guys please I need your help!
If any has passed through the same situation or has any idea why my phone is stuck to boot logo please let me know,
i have a useless brand new Note 3 now
your support is really appreciated.

Avenech said:
If any has passed through the same situation or has any idea why my phone is stuck to boot logo please let me know,
i have a useless brand new Note 3 now
your support is really appreciated.
Click to expand...
Click to collapse
Find the correct stock ROM for your device and the PIT file to match it, then flash it via ODIN and you should be OK. Since you can get to the Boot loader it's most definitely fixable.

radicalisto said:
Find the correct stock ROM for your device and the PIT file to match it, then flash it via ODIN and you should be OK. Since you can get to the Boot loader it's most definitely fixable.
Click to expand...
Click to collapse
I Tried flashing stock Rom with the PIT file that i found on other XDA Thread, but Odin was stuck on <ID:0/011> Initialzation.." as before!
any suggestions?
can you give me a different PIT file?

Avenech said:
I Tried flashing stock Rom with the PIT file that i found on other XDA Thread, but Odin was stuck on <ID:0/011> Initialzation.." as before!
any suggestions?
can you give me a different PIT file?
Click to expand...
Click to collapse
ODIN won't show the Device Name or Model, and regarding the phone issue, I could have helped you if I have the device, and even I don't know what could be the Solution, I guess you tried almost everything to fix it.
Hope you can fix it.

[Q] Bricked Galaxy S4, pls help (everything tried)

Hi all ! Hope sb help me with this...
I updated my S4 i9500 to android 5.0.1 lollipop (XXUHOAA ) about 8 months ago. No problem untill 2 days ago my phone turned off itself then went to bootloop.
Now it just shows the s4 logo then restarts again all the time. SOMETIMES it turns on but after 4 or 5 seconds again turns off (not able to do anything during 4 seconds)
I CAN NOT access recovery mode. The recovery mode became a black screen and not able to wipe/factory reset.
Before I bring it to serviceman I want to see if u can help me with this(It's warranty is voided now)
WHAT I HAVE TRIED RECENTLY:
I tried to flash 4 different Roms using 3 different odin versions but no success
[flashing roms get the error "complete(write) operation failed" and by using the suitable PIT file I get the error "repartition operation failed"]
Also tried flashing 5-files-firmware (with pit file) but again "repartition operation failed"
I used 3 usb cables including the original one
I did all of those steps using 2 different laptops and also different ports
I'm sure the samsung drivers are installed[odin port comes blue or yellow]
I used SkipSoft ToolKit and one click unsoftbrick softwares but no success
Also used adb to factory reset phone but it doesn't detect my phone[ seems it needs to be turned on]
I removed simcard, format extra sd card, remove battery for a long time and.....
Is there anything I haven't tried yet?? Can somone help ? I appreciate any suggestion,Thanks
[[Sorry my English]]

Try flashing a custom recovery and then factory reset?

KennethHau said:
Try flashing a custom recovery and then factory reset?
Click to expand...
Click to collapse
Hi and Thanks for replying, Well I downloaded some CWM/TWRP recoveries but the problem is that I can't flash anything with Odin. I always get the error:
<ID:0/007>NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed
And this error is the same while flashing anything like Rom,Recovery,philz_touch and even auto root files.
I'm so confused

Have you tried downloading stock firmware from sammobile for your model and carrier and installing? If that doesn't work you may have a serious issue.
Sent from my unknown using Tapatalk
---------- Post added at 01:12 AM ---------- Previous post was at 01:10 AM ----------
alimtale said:
Hi and Thanks for replying, Well I downloaded some CWM/TWRP recoveries but the problem is that I can't flash anything with Odin. I always get the error:
<ID:0/007>NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed
And this error is the same while flashing anything like Rom,Recovery,philz_touch and even auto root files.
I'm so confused
Click to expand...
Click to collapse
Is the Odin version the proper one for your phone?
Sent from my unknown using Tapatalk

Jchef said:
Have you tried downloading stock firmware from sammobile for your model and carrier and installing? If that doesn't work you may have a serious issue.
Is the Odin version the proper one for your phone?
Click to expand...
Click to collapse
Of course I did. I even downloaded different android versions (5.0.1,4.4.2,4.2.2) But non of them flashed
I remember I used Odin 3.0.9 to upgrade my S4 to 5.0.1 months ago but I tried different Odin versions (1.85,3.0.7,3.0.9) for in case.
Unfortunately,I face an error all the time that is related to Nand write corruption .

If you have flashed 4.2.2 it's a brick ,for sure.

ludoke said:
If you have flashed 4.2.2 it's a brick ,for sure.
Click to expand...
Click to collapse
No it didn't flashed. After I got error while flashing 5.0.1 firmware I tried other versions to see if it works. But the error is the same.

alimtale said:
No it didn't flashed. After I got error while flashing 5.0.1 firmware I tried other versions to see if it works. But the error is the same.
Click to expand...
Click to collapse
Even trying to flash 4.2.2 will result in a brick,so it's normal that it didn't work

ludoke said:
Even trying to flash 4.2.2 will result in a brick,so it's normal that it didn't work
Click to expand...
Click to collapse
My phone turned off itself. I tried flashing firmware after the problem occurred. I don't think the problem is because of flashing 4.2.2

Deleted

Maybe it's the battery

ludoke said:
Even trying to flash 4.2.2 will result in a brick,so it's normal that it didn't work
Click to expand...
Click to collapse
This is incorrect. You don't brick your phone when you try to flash 4.2.2. That's simply not possible.

dorian2kx said:
Maybe it's the battery
Click to expand...
Click to collapse
I have 2 batteries...both of them same result (bootloop)

alimtale said:
I have 2 batteries...both of them same result (bootloop)
Click to expand...
Click to collapse
Does it reboot when you are in download mode? If so, then it's your power button that is faulty. Either try to wiggle it loose or replace it.
If it doesn't reboot while in download mode then you have some other hardware damage. Probably your motherboard is damaged.

Lennyz1988 said:
Does it reboot when you are in download mode? If so, then it's your power button that is faulty. Either try to wiggle it loose or replace it.
If it doesn't reboot while in download mode then you have some other hardware damage. Probably your motherboard is damaged.
Click to expand...
Click to collapse
No it doesn't reboot while download mode.Maybe hardware damage but it sometimes turns on and I can access applications and settings for a short time (about 5 seconds)
I have rooted my device when upgraded to 5.0.1. And recently I unchecked "enable superuser" in the superuser app.( I have done this before many times without problem)
I guess there is a problem related to that because when my phone turned on I tried to check the enable option in the superuser but as soon as I touch the check box my phone turns off instantly

If your phone goes into download mode. I don't think it is bricked.
Sent from my unknown using Tapatalk

You cannot fix your phone by Odin because of the Secure Download enabled bootloader.
You will have to pay a JTAG repair service.
Android 5.0.1 is a crap, which replaces your bootloader with a secure-download featured one,
so you won't ever be able to have the control of your phone again!

@Killnolife: A little melodramatic? It's not a locked bootloader so he still has total control over the device. Come back with an AT&T or Verizon S4 and then complain about having no control.
OP, Lennyz1988's advice is sound. Follow it.

Well I got tired of trying to flash my device with Odin. Always error... The Only choice I have is to take the phone to the service center and see what they can do...I'll share the result...

I took my phone to service centers for repair, they said the hard is damaged and it takes about 100$ to replace that:crying: if I pay that much I'm not sure it wont damage again
So my phone is dead now on my table and I gonna buy a new phone (maybe s5 or z3). Hope no one experience this situation

What firmware files do I need to complete reflash my Note 4 SM-N910F?

I got a bricked Samsung Galaxy Note 4 (910F) vodafone branded.
it's totally broken I can't start it, can't go into recovery (the hardware buttons are OK).
I can only go into download mode.
tried flashing everything with odin back to stock. followed many different instructions and now I'm lost.
can someone tell me what exact files I need?
I think I have the right firmware downloaded BUT what about the bootloader? on sammobile under germany-vodafone there are so many different versions which one shall I choose?
AND: Do I need CSC? if so which one and where to find? Couldn't find it on sammobile.
And am I right with putting the bootloader under BL, the firmware under AP, the CP (whatever this is) under CP, the csc under csc?
repartition unchecked as I read somewhere.
I still don't understand what this "pit" file is for and I'm not sure if I have the right one.. never had a phone with sooo many different firmware files..
I'm used to flash via fastboot "recovery.img, boot.img, system.img" odin is a new thing for me
HELP PLEASEEE :'(
the reactivation lock is on.

nekrosmsk said:
I got a bricked Samsung Galaxy Note 4 (910F) vodafone branded.
it's totally broken I can't start it, can't go into recovery (the hardware buttons are OK).
I can only go into download mode.
tried flashing everything with odin back to stock. followed many different instructions and now I'm lost.
can someone tell me what exact files I need?
I think I have the right firmware downloaded BUT what about the bootloader? on sammobile under germany-vodafone there are so many different versions which one shall I choose?
AND: Do I need CSC? if so which one and where to find? Couldn't find it on sammobile.
And am I right with putting the bootloader under BL, the firmware under AP, the CP (whatever this is) under CP, the csc under csc?
repartition unchecked as I read somewhere.
I still don't understand what this "pit" file is for and I'm not sure if I have the right one.. never had a phone with sooo many different firmware files..
I'm used to flash via fastboot "recovery.img, boot.img, system.img" odin is a new thing for me
HELP PLEASEEE :'(
the reactivation lock is on.
Click to expand...
Click to collapse
The note 4 firmware is usually only 1 file that contains all you need. It contains the bootloader and CSC that you pick during download. Just pick the CSC for your country.
This is unless you get a 4 file repair firmware, which contains separate bootloader, system, and CSC files.
The pit file is only needed to repartition your device.
But with all off that aside, you state that your activation lock is activated. These means the phone was password protected.
If you tell me your country, I can at least point you to the correct firmware. So at least you'll know you got the correct one.
But as far as the activation lock, I can't help with that. "Google"
Edit. I now see you mentioned Germany Voda.
So here's the most current firmware for your device.
https://fws03.updato.com/GALAXYNOTE4/SM-N910F/TCL/SM-N910F_1_20171228192640_l5rw6mqv67.zip
Download and unzip.
Then if it's just 1 file that's .md5 then you put it in AP slot.
If it's 4 files put them in appropriate slots.

aaron74 said:
The note 4 firmware is usually only 1 file that contains all you need. It contains the bootloader and CSC that you pick during download. Just pick the CSC for your country.
This is unless you get a 4 file repair firmware, which contains separate bootloader, system, and CSC files.
The pit file is only needed to repartition your device.
But with all off that aside, you state that your activation lock is activated. These means the phone was password protected.
If you tell me your country, I can at least point you to the correct firmware. So at least you'll know you got the correct one.
But as far as the activation lock, I can't help with that. "Google"
Edit. I now see you mentioned Germany Voda.
So here's the most current firmware for your device.
https://fws03.updato.com/GALAXYNOTE4/SM-N910F/TCL/SM-N910F_1_20171228192640_l5rw6mqv67.zip
Download and unzip.
Then if it's just 1 file that's .md5 then you put it in AP slot.
If it's 4 files put them in appropriate slots.
Click to expand...
Click to collapse
This reactivation lock doesn't matter I found a solution how to bypass it when the phone is set up running android.
my question is, is it possible to flash firmware to the note4 at all with reactivation lock on? Or is that just an android thingy?
And yes please that would be nice if you show me the right firmware.
My model:
N910F GSMH
I believe it is vodafone branded because when it once worked it showed a vodafone logo while starting up.
my country is Germany.
I hope thats enough info :/

nekrosmsk said:
This reactivation lock doesn't matter I found a solution how to bypass it when the phone is set up running android.
my question is, is it possible to flash firmware to the note4 at all with reactivation lock on? Or is that just an android thingy?
And yes please that would be nice if you show me the right firmware.
My model:
N910F GSMH
I believe it is vodafone branded because when it once worked it showed a vodafone logo while starting up.
my country is Germany.
I hope thats enough info :/
Click to expand...
Click to collapse
I believe it should still flash with lock. If it isn't flashing something is wrong.
If you can't get Odin to flash that firmware try this and see what happens.
Download TWRP and flash it. Can you boot into recovery then? If so download a custom rom and flash it and see what happens.
TWRP: https://eu.dl.twrp.me/trlte/twrp-3.2.1-0-trlte.img.tar
Do you have Samsung drivers installed on PC? http://developer.samsung.com/common/download/check.do?actId=698
Do you have a good Odin? https://dl.sammobile.com/Odin3-v3.13.1.zip

aaron74 said:
I believe it should still flash with lock. If it isn't flashing something is wrong.
If you can't get Odin to flash that firmware try this and see what happens.
Download TWRP and flash it. Can you boot into recovery then? If so download a custom rom and flash it and see what happens.
TWRP: https://eu.dl.twrp.me/trlte/twrp-3.2.1-0-trlte.img.tar
Do you have Samsung drivers installed on PC? http://developer.samsung.com/common/download/check.do?actId=698
Do you have a good Odin? https://dl.sammobile.com/Odin3-v3.13.1.zip
Click to expand...
Click to collapse
I have the right latest samsung drivers installed yes.
I have the Odin version you just sent a link of. ( I also tried different older versions but no success).
I can't boot into recovery doesn't work. the hardware buttons are 100% working as I have to press vol+ to confirm to go into download mode.
I tried flashing TWRP and CWM both didn't work "custom recovery blocked by A/L error".
I can successfully flash firmware with Odin. It says "PASS" and then the phone reboots and is stuck on Samsung Logo. and sometimes it just shows blue text "recovery booting" but is stuck. nothing happens.

nekrosmsk said:
This reactivation lock doesn't matter I found a solution how to bypass it when the phone is set up running android.
my question is, is it possible to flash firmware to the note4 at all with reactivation lock on? Or is that just an android thingy?
And yes please that would be nice if you show me the right firmware.
My model:
N910F GSMH
I believe it is vodafone branded because when it once worked it showed a vodafone logo while starting up.
my country is Germany.
I hope thats enough info :/
Click to expand...
Click to collapse
Hey sorry the link you've sent doesn't work :/

aaron74 said:
The note 4 firmware is usually only 1 file that contains all you need. It contains the bootloader and CSC that you pick during download. Just pick the CSC for your country.
This is unless you get a 4 file repair firmware, which contains separate bootloader, system, and CSC files.
The pit file is only needed to repartition your device.
But with all off that aside, you state that your activation lock is activated. These means the phone was password protected.
If you tell me your country, I can at least point you to the correct firmware. So at least you'll know you got the correct one.
But as far as the activation lock, I can't help with that. "Google"
Edit. I now see you mentioned Germany Voda.
So here's the most current firmware for your device.
https://fws03.updato.com/GALAXYNOTE4/SM-N910F/TCL/SM-N910F_1_20171228192640_l5rw6mqv67.zip
Download and unzip.
Then if it's just 1 file that's .md5 then you put it in AP slot.
If it's 4 files put them in appropriate slots.
Click to expand...
Click to collapse
hey thanks in advance, but this link doesnt work it says "hotlinking is not cool". anyways I searched the firmware for my model number on this site and applied the "germany vodafone" filter. but there are still soo many different entries which one shall I choose? The latest date?

nekrosmsk said:
hey thanks in advance, but this link doesnt work it says "hotlinking is not cool". anyways I searched the firmware for my model number on this site and applied the "germany vodafone" filter. but there are still soo many different entries which one shall I choose? The latest date?
Click to expand...
Click to collapse
Here's webpage
https://updato.com/firmware-archive-select-model?record=58770125168D11E89F15FA163EE8F90B
After you flash, how long are you waiting for it to boot?
Sometimes it takes awhile.

aaron74 said:
Here's webpage
https://updato.com/firmware-archive-select-model?record=58770125168D11E89F15FA163EE8F90B
After you flash, how long are you waiting for it to boot?
Sometimes it takes awhile.
Click to expand...
Click to collapse
Thanks for the link I'm downloading.
After flashing odin says PASS and my note 4 reboots. then there are 2 cases which in my view appear randomly. Either it shows the samsung logo and is stuck.
OR it shows the samsung logo and a blue little text in the upper left corner saying "recovery booting" and is stuck. I waited like 5 minutes. shall I wait longer? :/ hm..I'll try
OH and sometimes the screen just goes black idk if it really turns off after getting stuck on samsung logo.

Pull the battery, leave it out for 10+ minutes
Put battery back in
Boot to download mode (Power + Vol Down + Home)
Then try (re)flashing stock ROM via odin, i would try the earliest you can find to have the best chance, you can always flash a later one if you get it running
Better range of ROMS from sammobile, i never use updato for that reason: https://www.sammobile.com/firmwares/galaxy-note4/SM-N910F/VD2/
If none of that works, then its likely you have a hardware fault ...emmc or other

stylemessiah said:
Pull the battery, leave it out for 10+ minutes
Put battery back in
Boot to download mode (Power + Vol Down + Home)
Then try (re)flashing stock ROM via odin, i would try the earliest you can find to have the best chance, you can always flash a later one if you get it running
Better range of ROMS from sammobile, i never use updato for that reason: https://www.sammobile.com/firmwares/galaxy-note4/SM-N910F/VD2/
If none of that works, then its likely you have a hardware fault ...emmc or other
Click to expand...
Click to collapse
So I tried flashing. after flashing OH WONDER it said recovery booting and then it showed this green android logo thing with a rotating icon in it "you know what I mean" but then it stopped and just turned off.. I could freak out really.. I tried flashing again. same issue. I could then press the recovery mode key combo to get into this rotating android logo screen but everytime it just freezes and turns off. yes the battery is fully charged before I started flashing this firmware now. I flashed the one u said the earliest. So Now I tried the one the other guy here showed me. didn't work either. it just gets stuck at samsung logo. I found a repair firmware for my model containing (pit, bl, ap, cp, csc and odin) I flashed all but odin fails "write error". I then tried odin v3.0.7 but then it got stuck while flashing the system image. I waited like 1 hour. nothing. tried it again. nothing it freezes on the same position. I then tried the same on the latest versions of odin v3.12.3, 3.12.7 and on 3.13.1 but it also freezes on system.img.ext4 image flashing..

nekrosmsk said:
So I tried flashing. after flashing OH WONDER it said recovery booting and then it showed this green android logo thing with a rotating icon in it "you know what I mean" but then it stopped and just turned off.. I could freak out really.. I tried flashing again. same issue. I could then press the recovery mode key combo to get into this rotating android logo screen but everytime it just freezes and turns off. yes the battery is fully charged before I started flashing this firmware now. I flashed the one u said the earliest. So Now I tried the one the other guy here showed me. didn't work either. it just gets stuck at samsung logo. I found a repair firmware for my model containing (pit, bl, ap, cp, csc and odin) I flashed all but odin fails "write error". I then tried odin v3.0.7 but then it got stuck while flashing the system image. I waited like 1 hour. nothing. tried it again. nothing it freezes on the same position. I then tried the same on the latest versions of odin v3.12.3, 3.12.7 and on 3.13.1 but it also freezes on system.img.ext4 image flashing..
Click to expand...
Click to collapse
Try the Samsung Smart Switch for PC - like this : https://www.youtube.com/watch?v=9QhJngOuLQ4&t=337s
Good luck, maybe it will work - for me it did work for the 910C.

w41ru5 said:
Try the Samsung Smart Switch for PC - like this : https://www.youtube.com/watch?v=9QhJngOuLQ4&t=337s
Good luck, maybe it will work - for me it did work for the 910C.
Click to expand...
Click to collapse
doesnt work. I tried several versions of smartswitch AND samsung kies. nothing works it always says my model is not supported. I reinstalled drivers. tried on another pc. tried another usb port. yes I'm using the original stock usb cable. model not supported. But I've also read that in other threads that the 910F model seems to be unknown by kies or smartswitch. I'm rly starting to hate samsung now. I have never ever had so many problems with flashing and so on.

nekrosmsk said:
So I tried flashing. after flashing OH WONDER it said recovery booting and then it showed this green android logo thing with a rotating icon in it "you know what I mean" but then it stopped and just turned off.. I could freak out really.. I tried flashing again. same issue. I could then press the recovery mode key combo to get into this rotating android logo screen but everytime it just freezes and turns off. yes the battery is fully charged before I started flashing this firmware now. I flashed the one u said the earliest. So Now I tried the one the other guy here showed me. didn't work either. it just gets stuck at samsung logo. I found a repair firmware for my model containing (pit, bl, ap, cp, csc and odin) I flashed all but odin fails "write error". I then tried odin v3.0.7 but then it got stuck while flashing the system image. I waited like 1 hour. nothing. tried it again. nothing it freezes on the same position. I then tried the same on the latest versions of odin v3.12.3, 3.12.7 and on 3.13.1 but it also freezes on system.img.ext4 image flashing..
Click to expand...
Click to collapse
afaik the "repair" fimeware is no better than flashing a stock ROM in one file...
its startng to sound like a hardware error, if it cant even write to the dvice theres really not many (probably any) options left.
ive purposely bricked a phone and recovered it (not recommended of course), ive never had or never saw as much effort youve put in to try and recover a phone...

stylemessiah said:
afaik the "repair" fimeware is no better than flashing a stock ROM in one file...
its startng to sound like a hardware error, if it cant even write to the dvice theres really not many (probably any) options left.
ive purposely bricked a phone and recovered it (not recommended of course), ive never had or never saw as much effort youve put in to try and recover a phone...
Click to expand...
Click to collapse
me neither.. can't believe this.. how can a phone be physically damaged by flashing? paid 70 bugs for a note 4 with a software issue.. as I often do. recovered dead phones from sony, xiaomi, wiko, asus, lg, huawei etc... adb, fastboot and u good to go. odin is killin me.. gonna sell it as bricked.

Cleared caches?

R0B3RTF1SH3R said:
Cleared caches?
Click to expand...
Click to collapse
HOW? If I can't boot into recovery mode?

S7 Edge FRP Erase on G935F G935FXXU3ERL3 Android 8.0.0 Oreo

Hello,
I'm a Newbie
How can i erase the FRP on my s7 edge ? nothing works on my s7 edge.
Is there possibility with odein or else ?
my simcard is broken so only with odin or other software
Can someone help me, thx a lot :good::good::good:

CrankyBoy^^ said:
Hello,
I'm a Newbie
How can i erase the FRP on my s7 edge ? nothing works on my s7 edge.
Is there possibility with odein or else ?
my simcard is broken so only with odin or other software
Can someone help me, thx a lot :good::good::good:
Click to expand...
Click to collapse
hello "A Newbie", how goes it? LOLOL
welcome to the fray, we are all only here to learn, help, and/or both at the same time, so youre in a good place.
Anyways, did you do a factory reset and are now stuck with the FRP screen?

exactly, i do a factory reset and now I'm here
I'm searching for Help

CrankyBoy^^ said:
exactly, i do a factory reset and now I'm here
I'm searching for Help
Click to expand...
Click to collapse
ok, get the firmware for your phone from sammobile.com but use samfirm or frija to download it, flash the firmware in Odin 9 time. yes, 9 times. try booting between flashes and itll go away by the 9th time. Not even kidding

9 time flashing. No chance. FRP lock is almost there.
Installed is G935FXXS6ESI4
What can i do ? Any Idea = Combination Firmware ?

Youdoofus said:
ok, get the firmware for your phone from sammobile.com but use samfirm or frija to download it, flash the firmware in Odin 9 time. yes, 9 times. try booting between flashes and itll go away by the 9th time. Not even kidding
Click to expand...
Click to collapse
is this really working ?
bcs my sim tray is broken and have flickering screen on my phone and want other way to bypass FRP
p.p "try booting between flashes and itll go away by the 9th time" on each flash to boot and re-flash it ?

loonbg said:
is this really working ?
bcs my sim tray is broken and have flickering screen on my phone and want other way to bypass FRP
p.p "try booting between flashes and itll go away by the 9th time" on each flash to boot and re-flash it ?
Click to expand...
Click to collapse
not anymore. there was a patch that fixed the bug that allowed this to occur. Sammy is always right on our tails. now you need the combination firmware, which you flash in Odin as well then follow it up with the stock firmware from sammobile since the combination FW isnt really bootable (it is, but its weird lol)

Youdoofus said:
not anymore. there was a patch that fixed the bug that allowed this to occur. Sammy is always right on our tails. now you need the combination firmware, which you flash in Odin as well then follow it up with the stock firmware from sammobile since the combination FW isnt really bootable (it is, but its weird lol)
Click to expand...
Click to collapse
I flashed the combination firmware. After that I flashed my stock firmware but now I get stuck on recovery screen. First it says "Erasing" and then the dead Android mascot shows up. Can't boot into system. Any suggestions? FRP Lock is still on and I can't flash TWRP, custom binary is locked by frp.

possible solution
Hi, how are you? I'm sorry for my english, I'm from Brazil and I'm using the ksks translator so with my j5 i used the frp hijacker (just put it on google) there you choose the phone model, put it in download mode, install the program on the computer, choose the model, check remove frp and a hijack it! and ready frp unlocked

M.Ned said:
I flashed the combination firmware. After that I flashed my stock firmware but now I get stuck on recovery screen. First it says "Erasing" and then the dead Android mascot shows up. Can't boot into system. Any suggestions? FRP Lock is still on and I can't flash TWRP, custom binary is locked by frp.
Click to expand...
Click to collapse
Does Odin say it flashed the firmware successfully

Youdoofus said:
Does Odin say it flashed the firmware successfully
Click to expand...
Click to collapse
Yes it does. I tried 3 different firmwares from different regions on SamMobile. Still no luck...

M.Ned said:
Yes it does. I tried 3 different firmwares from different regions on SamMobile. Still no luck...
Click to expand...
Click to collapse
tried it on another computer? Ive had that issue with my desktop/laptop(s). I never dug into what caused it to fail on the desktop vs working on a few laptops. Literally everything else works exactly as it should on the desktop so i just let it be an unresolved oddity. Likely not worth the time it would take to resolve. Anywho, try a different computer and/or diff cable. I just ordered an Anker cable from amazon and its thicker and more sturdy than the micro usb cable ive been hanging on to from my old blackberry tour. Cables are stupid cheap online these days, even for the very very good ones. Perhaps worth a shot, but i cant suggest that you spend money on anything. I can say that its what I would do.