Database Users

USSD Codes not Working Anymore

I have my S7 Edge for a month now , everything used to work fine (located in Pakistan)
Two days back I flashed a new Stock Rom from UK to check country restricted apps (there were not much though) and I noticed on that ROM USSD codes were not working and neither do my sensors.
Now I reverted back to stock rom of my region, now the sensors are fine, but USSD codes are still not working. I tried the 2 ROM available for my region thrice, but still the same issue.
Please suggest what should I do?
Note: I didn't root my phone (because don't want to void my warranty since I paid extra $150 for that) nor do there's any network restriction on USSD.

re: USSD codes
Shsabi said:
I have my S7 Edge for a month now , everything used to work fine (located in Pakistan)
Two days back I flashed a new Stock Rom from UK to check country restricted apps (there were not much though) and I noticed on that ROM USSD codes were not working and neither do my sensors.
Now I reverted back to stock rom of my region, now the sensors are fine, but USSD codes are still not working. I tried the 2 ROM available for my region thrice, but still the same issue.
Please suggest what should I do?
Note: I didn't root my phone (because don't want to void my warranty since I paid extra $150 for that) nor do there's any network restriction on USSD. Normally I use the codes to check balance and remaining data, it's so irritating to call the help center to know all the details without USSD.
Click to expand...
Click to collapse
You need to change your CSC to any other region or country.
The UK CSC no longer allows using the USSD codes.
I had the same problem using USSD so I just changed to a different CSC.
Once I changed to a different CSC the USSD codes worked perfectly.
Go to this link to download twrp flashable CSC's for your phone.
You will see a large selection to choose from:
http://forum.xda-developers.com/s7-edge/development/utility-flashable-csc-selection-30-t3392957
Good luck,
Have a great day!

Misterjunky said:
You need to change your CSC to any other region or country.
The UK CSC no longer allows using the USSD codes.
I had the same problem using USSD so I just changed to a different CSC.
Once I changed to a different CSC the USSD codes worked perfectly.
Go to this link to download twrp flashable CSC's for your phone.
You will see a large selection to choose from:
http://forum.xda-developers.com/s7-edge/development/utility-flashable-csc-selection-30-t3392957
Good luck,
Have a great day!
Click to expand...
Click to collapse
just one question, it won't trigger warranty void knox.. right?
Plus, I have my own region's CSC, but when I try to flash it via odin it gets stuck at NAND Write Start!!.. Anyway to fix it?

Misterjunky said:
You need to change your CSC to any other region or country.
The UK CSC no longer allows using the USSD codes.
I had the same problem using USSD so I just changed to a different CSC.
Once I changed to a different CSC the USSD codes worked perfectly.
Go to this link to download twrp flashable CSC's for your phone.
You will see a large selection to choose from:
http://forum.xda-developers.com/s7-edge/development/utility-flashable-csc-selection-30-t3392957
Good luck,
Have a great day!
Click to expand...
Click to collapse
When don't you stop thinking that all people ROOT their phones?
"TWRP flashable CSC's": so you phone has to be rooted! Not everyone wants their phones to root, and there are people who won't want the KNOX-flag triggered!

re: you're right!
henklbr said:
When don't you stop thinking that all people ROOT their phones?
"TWRP flashable CSC's": so you phone has to be rooted! Not everyone wants their phones to root, and there are people who won't want the KNOX-flag triggered!
Click to expand...
Click to collapse
After giving it a lot of thought you're right, perhaps that's the first thing I should ask,
maybe the reason I did not think of asking is because I come from a rooted family...
But sooner or later doesn't everyone root their phones? LOL
Have a great day!

Misterjunky said:
The UK CSC no longer allows using the USSD codes.
Click to expand...
Click to collapse
Not quite true, I do have a UK version, and USSD codes work fine on mine.
Sent from my SM-G930F using XDA-Developers mobile app

henklbr said:
When don't you stop thinking that all people ROOT their phones?
"TWRP flashable CSC's": so you phone has to be rooted! Not everyone wants their phones to root, and there are people who won't want the KNOX-flag triggered!
Click to expand...
Click to collapse
The root method does NOT trip knox! Stop spreading your nonsense lol! It is done with the Samsung official engineering bootloader. Again, WARRANTY VOID: 0x0 :good::good:
I have been flashing/testing different carrier's firmware and have rooted the phone pictured below 3 or 4 times now and, as you can see, it's golden. Currently it is G935U but originally it was from Sprint.

hi,
i have the same problem on my galaxy s7 SM-G930 F
NONE of the ussd/mmi codes work!
when i type the code nothing happens
i instaled the PhoneINFO app and in the CSC Code card the Original CSC Code field is empty
but all other fields are filled:
Product code:
sm2g930fzsadhr
original csc code:
firmwares csc code:
DHR
Active csc code:
DHR
Availabile csc codes:
CRO, DHR
CSC Country:
Croatia / HR
Mobile Operator:
HT HR / 21901
how can i fix my s7 so CSC Codes can work again!

How to fix invalid MMI code on samsung galaxy s7
I have the same problem on my galaxy s7 SM-G930F.
When I check Divert if Unavailable (62) using *#62# I get the error
"Connection problem or invalid MMI code."...
It turns out that the G930F (BNIB sealed) I bought was a grey import and even though the hardware G930F is international, the firmware loaded is for the UK and the Phone INFO app shows the CSC to be "BTU" (see CSC codes) . And so even though the phone is unlocked, it does not function 100% in the Australian mobile network.
To fix this I had to flash the AU firmware for the CSC code XSA found at
SM-G930F — Galaxy S7 firmware
using ODIN.
After this the CSC is updated to XSA and all USSD codes work perfectly!
No rooting required!
A bonus for having the correct CSC/firmware for my S7 is that VoLTE now works with the carrier!

Note 3 N9005 LTE 4G Doesn't Work, Do I need CSC change?

I've searched the forums and no one seems to have an exact FIX for my issue. So I have a Galaxy Note 3 N9005 32GB black version, the phone works well in 3G, never had an issue with it but now my network provider recently upgraded their plan and offers 4G internet but my phone doesn't want to connect. The provider offers 4G through BAND 1 2100MHz and Note 3 N9005 does have that band but it doesn't want to connect. It only works on 3G and when I enable Mobile Data it says H+! Not once has it connected to 4G!
I wanna mention that my friend has the exact same N9005 phone and his phone works on 4G all the time. Both of us have the same contract with the same network provider!
The only difference between our phones is the CSC region, we have different CSC. MY SIM card works in 4G on his Note 3 and his sim card doesn't work on 4G on my phone. (we exchanged the SIM cards for testing). So the problem is from my phone not from the SIM card. My phone is also original, its not a Chinese clone! Its confirmed with "Samsung Phone Info" app from Play Store.
Here's a few things I already did that some of you may be inclined to recommend to me:
1 - My APN is correctly set
2 - I am on official stock Android Lollipop 5.0 latest version and the phone is not rooted
3 - I already did a factory reset + wipe cache partition
4 - I saw others suggesting that people may not be in the range of a 4G tower! Not the case! Like I said, I switched the SIM cards with my friend on a public bench, out in the open, not even behind walls. Of course and his phone connects to 4G with his SIM card and also with MY SIM card while my phone doesn't connect to 4G with neither of these SIM cards.
5 - In Mobile Networks > Network Mode, my phone is of course already set on 4G/3G/2G (auto connect) and by the way, my friend's Note 3 says LTE/WCDMA/GSM (auto connect) instead of 4G/3G/2G with the same language set on both phones. Why?? I know its the same thing and I know 4G stands for LTE and 3G for WCDMA but why does it appear differently on these phones?
6 - I already went to Service Mode via *#0011# and manually selected BAND 1 LTE, it says "no service" or "emergency calls only" if I do that so I switched back to "Automatic"
So what the heck is going on? This phone is giving me headaches! I'm close to smashing my phone! After this I sweared to my self this is the last Samsung phone I ever buy. Probably I will be switching to Asus or Lenovo in the future. Or any other phone that does NOT have this CSC BS! This CSC thing is a complete rip-off!
Im thinking that the problem could be my CSC perhaps?? My friend's Note 3 N9005 has a COA CSC (Cosmote Romania) and I have a XEF CSC (Unbranded France). Both phones are factory unlocked and work in all networks. They are not branded by any phone maker! His COA CSC is unbranded. Yes it belongs to a phone retailer but that retailer doesn't brand their phones, no bloatware, no SIM lock. If you buy a phone from Cosmote (with COA CSC) it works in all networks, unlike Vodafone or Orange who lock their phones and brand them.
What should I do? Should I attempt to change my CSC? If so, how? My phone warranty has expired a long time ago, so I shouldn't care that much about triggering Knox though not triggering it would be preferred.
Which path should I pursue? Should I simply use ODIN and flash a STOCK COA CSC (Cosmote Romania) or STOCK ROM CSC (Unbranded Romania) from SamMobile.com with the latest version of Lollipop? Would this trigger Knox? Will it affect my all networks unlocked status? I mean, I won't have to unlock it after that, right???
OR should I ROOT my phone, change CSC, then UNROOT? If so do you know of any method to root Lollipop 5.0 without triggering Knox?
What do you guys think? Whats the problem with my phone? Why doesn't it work on 4G? Because of CSC? Or is it something else?
Thanks!

The best way to confirm the model # would be to boot into Odin mode and look there.

audit13 said:
The best way to confirm the model # would be to boot into Odin mode and look there.
Click to expand...
Click to collapse
What do you mean? Can you be more specific? I already told you my model number, its N9005!! Do you want a screenshot?

Dear OP, have you tried the other Samsung secret code? *#2263# then program it to accept LTE only.
That's the only foolproof way to get the Note to connect to LTE. In my country I only get 2-3 of the 5 LTE bars, so the Note wouldn't automatically connect to LTE or immediately stoop down to 3G through the settings. That specific secret code and setting is LITERALLY THE ONLY WAY TO GET MY NOTE 3 TO CONNECT TO LTE IN MY EXPERIENCE.
If that still doesn't get your phone to run LTE, either your carrier is whack or your phone is, and no amount of Cyanogenmod can fix it because your hardware modem inside the phone might be whack and you can't really do anything if that's the case...
Sent from my Galaxy Note 3 using XDA Labs

Odeira.Oloap said:
Dear OP, have you tried the other Samsung secret code? *#2263# then program it to accept LTE only.
That's the only foolproof way to get the Note to connect to LTE. In my country I only get 2-3 of the 5 LTE bars, so the Note wouldn't automatically connect to LTE or immediately stoop down to 3G through the settings. That specific secret code and setting is LITERALLY THE ONLY WAY TO GET MY NOTE 3 TO CONNECT TO LTE IN MY EXPERIENCE.
If that still doesn't get your phone to run LTE, either your carrier is whack or your phone is, and no amount of Cyanogenmod can fix it because your hardware modem inside the phone might be whack and you can't really do anything if that's the case...
Sent from my Galaxy Note 3 using XDA Labs
Click to expand...
Click to collapse
I have already explained that there is nothing wrong with my carrier because I switched my SIM card with my friend's phone who has exactly the same N9005 model and it perfectly works on 4G on his phone. The only difference I could find in our phones is the CSC.
As for the other suggestion you sent me, I already said that I've been to SERVICE MODE. The code you've given me does nothing on my phone but as I can see from your screenshots, it gets you to SERVICE MODE. I've already been there through *#0011# switched to LTE/GSM only or LTE/WCMA only and I've explained that it still doesn't do anything.
Can someone please answer me this? Would it help if I change the CSC? Could this be the problem I'm having???

It may help if your CSC is changed it can do no harm .

JJEgan said:
It may help if your CSC is changed it can do no harm .
Click to expand...
Click to collapse
Ok, thanks! So how do I do this?
My phone warranty has expired a long time ago, so I shouldn't care that much about triggering Knox though NOT triggering it would be preferred.
As far as I know there are 2 methods to change the CSC. So how should I do it?
Should I simply use ODIN and flash a STOCK COA CSC (Cosmote Romania) or STOCK ROM CSC (Unbranded Romania) from SamMobile.com with the latest version of Lollipop? Would this trigger Knox? Will it affect my all networks unlocked status? I mean, I won't have to unlock it after that, right???
OR should I ROOT my phone, change CSC, then UNROOT? If so do you know of any method to root Lollipop 5.0 without triggering Knox?
Thanks

Booting into download mode will confirm the model #. Looking under the ROM's settings is not guaranteed to display the proper model #.
Both phones are running the same ROM, bootloader, and modem?

audit13 said:
Booting into download mode will confirm the model #. Looking under the ROM's settings is not guaranteed to display the proper model #.
Both phones are running the same ROM, bootloader, and modem?
Click to expand...
Click to collapse
Yes confirmed, same model, same baseband, same everything. The only thing different is the CSC. So whats next?

Did you try changing the csc by dialling *#272*enter IMEI#? Not sure if this method will work for your model of note 3.

audit13 said:
Did you try changing the csc by dialling *#272*enter IMEI#? Not sure if this method will work for your model of note 3.
Click to expand...
Click to collapse
No I haven't I'm trying now. Wow if this works Im gonna buy you a beer!

It doesn't work! just my luck! I entered this code: *#272*IMEI-number# and pressed call button, it says "Connection problem or invalid MMI code."

I just tried it on my Note 2 and S4 and it works. Maybe the phone is not running a multi-csc stock ROM?
I don't have a note 3 to try.

audit13 said:
I just tried it on my Note 2 and S4 and it works. Maybe the phone is not running a multi-csc stock ROM?
I don't have a note 3 to try.
Click to expand...
Click to collapse
Perhaps the code you gave me only works on older version of Android such as KitKat or whatever you have on Note 2... anyway Im using Samsung Phone Info app from Play Store and my CSC is XEF and under Available CSC Codes there is a bunch of CSC codes. Here I've made a sccreenshot:
From as far as I know there are only 2 ways to change the CSC: root or flash a different stock ROM

Yes, the note 2 has kit kat but the s4 is running stock lollipop.

audit13 said:
Yes, the note 2 has kit kat but the s4 is running stock lollipop.
Click to expand...
Click to collapse
Well unfortunately the code doesn't work on my phone. Anyway if you know for a fact, could you tell me this? Is it safe to reflash another STOCK rom from sammobile? Will it affect my phone in any way?
Thanks

Yes, it is safe to flash stock ROMs from sammobile.com.

I just flashed a local stock ROM and guess what, when I go to Phone Info app it still shows the same CSC! I still have XEF CSC, how can this be? Why hasn't the CSC change?

After flashing the stock rom, did you try the csc code I mentioned? Same thing happens when I flash a Rogers carrier rom over a Telus carrier rom. Once I select telus as the carrier from the csc menu, the Rogers app will disappear and the Telus app appears.

Ok after further researching I found a lot of interesting stuff so I'm gonna write it all down for other people who may need it in the future.
1 - If you have a multi-CSC phone and you flash a different CSC but which is in your "Available CSC" list but which you cannot choose or change without root, your CSC will NOT change. For example: I have flashed ROM CSC (Open Romania) on my XEF CSC (Open France) and guess what after the flash was successful and all, the CSC didn't change! It was still on XEF because ROM was in my "available list".
2 - If you try to flash a different CSC which is NOT in your list, then Odin will FAIL and softly brick your phone. For example: I got my phone bricked, trying to flash 2 CSCs which are not in my "available list": COA (Cosmote Romania) and DBT (Open Germany). In order to fix this issue all you have to do is to reflash YOUR OWN CSC, in my case it was XEF. Or you can even flash one of those CSC which are "available" or compatible so to say, such as "ROM" for example.
This is the firmware I currently have on my phone:
http://www.sammobile.com/firmwares/download/61565/N9005XXUGBOK6_N9005OXXGBOJ2_XEF/
These are the two firmwares I tried to flash on my phone, hoping to replace XEF with:
http://www.sammobile.com/firmwares/download/63441/N9005XXUGBOK6_N9005COAGBOK1_COA/
http://www.sammobile.com/firmwares/download/61464/N9005XXUGBOK6_N9005DBTGBOI1_DBT/
BOTH FAILED in Odin!
There are ONLY 2 ways to change the CSC on newer Samsung phones. Most guides online are based on KitKat 4.4 or older guides but for 5.0 Lollipop or even NEWER there are ONLY 2 ways to change your CSC:
1 - Root your phone and change the CSC. There are plenty of guides on how to do that online.
2 - You can avoid rooting your phone and use Odin instead, BUT accompanied by your stock firmware, you will also have to find and use a PIT file because Samsung as of 5.0 Lollipop uses different partitions for all the different regions. HOWEVER messing with PIT files is super risky and it can permanently brick your phone so its just better to root your phone instead! Dont waste your time trying to flash different regions/csc which is not in your available csc list, it won't work!
What can I say? Samsung is trying hard to block their users from changing their CSC... Why? They prefer their users buy new phones. Its pure greed yes but its what it is... For me, this was the last Samsung phone I ever buy. Im truly disappointed.

Changing CSC whilist updating to Nougat

Hey Guys !
So, my phones CSC code is DDE which means Deutsche Telekom. Currently Im using Slovak O2 SIM card so i don't think its carrier locked.
Now, I would like to change my CSC to BTU because theres 0 chance Telekom will update their firmware in this century.
So the question is, can this brick my phone if something goes wrong ? I heard stories about deleting IMEI by changing CSC etc.

Floppysvk said:
Hey Guys !
So, my phones CSC code is DDE which means Deutsche Telekom. Currently Im using Slovak O2 SIM card so i don't think its carrier locked.
Now, I would like to change my CSC to BTU because theres 0 chance Telekom will update their firmware in this century.
So the question is, can this brick my phone if something goes wrong ? I heard stories about deleting IMEI by changing CSC etc.
Click to expand...
Click to collapse
Download and install Phone INFO from Playstore. Check under the CSC CODE tab which country service codes are available for your specific model. Reference that with Sammobile and download the latest firmware.
(Continue ONLY if you've confirmed you have multi CSC on your device in other words more than one CSC to change to)
You'll notice there are 2 CSC files in the zip downloaded from Sammobile. Flash the one that starts with CSC and NOT the one starting with HOME. Your phone will then factory reset so make sure you've backed it up.
Ps!!! Warning!!!
Changing the CSC / product code on your Samsung device may invalidate the warranty. It may also invalidate the Samsung Knox warranty for Samsung devices
that support Samsung Knox. Furthermore, there is no guarantee that flashing the new firmware will work, even when you flash valid firmware.
In many cases, flashing the same firmware a second, or third, time may work.

Floppysvk said:
Hey Guys !
So, my phones CSC code is DDE which means Deutsche Telekom. Currently Im using Slovak O2 SIM card so i don't think its carrier locked.
Now, I would like to change my CSC to BTU because theres 0 chance Telekom will update their firmware in this century.
So the question is, can this brick my phone if something goes wrong ? I heard stories about deleting IMEI by changing CSC etc.
Click to expand...
Click to collapse
Nevermind try it. You'll see the magic. But be careful unless your phone is sm-g930f you may brick it.

I hace a similar problem, phone info says my csc its from BTU (UK) but I'm in Peru, I cannot make calls, How can I flash the correct csc for Peru?

G950FD from Iran (THR) with pre-installed Persian/Iranian Calendar

I bought an unlocked G950FD which turns out to be CSC THR (part of OXM) so should mean it's from Iran. I have found it generic enough in almost every way to be used internationally (in English) with two noticeable exceptions that i'm trying to solve.
1) there is pre-installed Persian Calendar in the OS which appears after the Gregorian date on the AOS and lock screen. I also noticed this extra date appearing on the Samsung Calendar app under the western date, but i don't use this app at all so can easily ignore. The AOS and lock screen is seen all the time and would displays: "MON, JUNE 5 (KHOR 15)". I looked through every settings on the phone and many forums online, and there is no software way to turn this off.
I thought a potential solution would be to replace this stock ROM with another region since any of the multi-CSC OXM firmwares should be compatible with the phone. So I tried to flash another region using Odin. I tried Singapore (SIN and STH) and completely reset/wiped the phone two separate times. However, despite flashing a large (almost 6GB) file onto the phone it still remains in THR when i looked in settings. I guess I misunderstood the purpose of different firmware regions, I thought i would be changing my phone's existing firmware to another region and get a different set of default apps and localization behavior. But the Persian date is still there on all the same screens.
Am I flashing the rom incorrectly? Is there some setting that i omitted that would give me the desired result of a Singapore OS? Any other ways to change CSC and get rid of unwanted parts of a regional firmware?
2) Another problem is when i receive calls on my local sim card, the phone number shows up without the country code, but if i store my numbers (on Google contacts) in "+<country code> <phone number>" format then the contact is not linked to the incoming call.
Apparently this is fairly common with international phones being used in another market. There is a workaround where i can edit my numbers on google to not have any numerical country codes but instead use the flag drop-down menu on google to indicate country associated with the number. I'm ok with that solution but is there another way? Would flashing a regional firmware that is my location solve this? The region that i intend to use the phone is not part of the OXM multi-CSC list of countries since they only sell the snapdragon variant here.
I would like to find solutions that would avoid root and custom roms, but if that is the only option here, i am not against going down that route.
Thanks a lot in advance.

My eventual solution and what i've learned.
So as i described above, i tried to flash many different versions of G950FD or G950F firware with multi-CSC OXM, but never saw my CSC change from THR. Nothing changed on my phone despite installing large files through odin which was always confusing to me. For the record, i tried BTU (UK), STH (Singapore), and SIN (Singapore) which are all part of the OXM.
I learned from another forum that the sim-card installed matters, so i was just trying different non-middle-east regions by picking UK or Singapore but my actual home region does not support this model/cpu variant. I don't have a sim-card from any OXM regions, only Hong Kong and US ones.
Then i found an old Australian (Optus) sim card from a trip and found a G950F firmware version with CSC OPS on Updato. Not part of CSC OXM but same PDA/Phone version and was told it's safe to flash. When i flashed that firmware with the AU sim card installed, i got the AU OS and all the old regional apps were gone. I got some Australian ones but nothing i can't uninstall. My caller ID problem also seem to be fixed. So i consider the problem fixed.
In all of this, the PDA version numbers were always the same (AQDG), so i'm still a bit unclear as to what the CSC file is specifying and doing.
Am i correct to assume that multi-CSC OXM firmware contained regional apps/settings for all the various regions but without a sim card installed to tell it which one to pick, it kept selecting the factory region of THR? And when i flashed the Optus firmware, did i really need the sim-card installed? Would it have changed the firmware to OPS because it's outside the multi-CSC OXM group?

You live in Hong Kong, right ?
I do too, and have a UAE S8, and Samsung Pay doesn't work.
Does your working around things allow you to use Pay, or you get stuck on the splash screen as well ?

tarkil said:
You live in Hong Kong, right ?
I do too, and have a UAE S8, and Samsung Pay doesn't work.
Does your working around things allow you to use Pay, or you get stuck on the splash screen as well ?
Click to expand...
Click to collapse
Yes i live in HK, so with the AU Optus Firmware I got a AU version of Samsung Pay with all AU ads and suggested businesses. I can get past the splash and login using my normal Samsung Account, which shouldn't have a region. BUT so far i haven't had any success adding any of my HK credit cards, i assume it's a version compatibility issue. There is no way to pick which regional version of Samsung Pay on the Play Store, so i guess it looks at your phone's origin to determine that part of the app.
I am not that keen to use Samsung Pay, but of course interested to know if it is possible. It says to call the banks to get my credit cards added, so maybe there is still a chance and i will post if i do succeed.
Do you think Samsung Pay is particularly good for HK? Would using Android Pay be comparable here? I'm not that experienced with mobile payment apps in the past. Seems like the membership card storage function will still work on my Samsung Pay so at least i have that and can slim down the wallet a bit.

Hey there buddy,
Finally found a thread that represents my problem also, in my case i have a s8 G950FD that shows the same thing on my lockscreen, by me it shows (KHOR18)!
Is there any way around it, i mean a fix?? I would greatly appreciate any help

Yes that's the Iranian calendar date so the day will increment everyday. Khor is abbrev for the current month.
Yes I have a solution (read my second post in thread) but involves flashing with a sim card and 950f or 950fd firmware of the same region as the sim card. You will need to reset and erase phone data.
If you need help flashing stock firmware there is a long thread on this forum and where I found the answer about how the sim card installed might make difference.
What region/sim are you currently trying to use your s8?

derf574 said:
Yes that's the Iranian calendar date so the day will increment everyday. Khor is abbrev for the current month.
Yes I have a solution (read my second post in thread) but involves flashing with a sim card and 950f or 950fd firmware of the same region as the sim card. You will need to reset and erase phone data.
If you need help flashing stock firmware there is a long thread on this forum and where I found the answer about how the sim card installed might make difference.
What region/sim are you currently trying to use your s8?
Click to expand...
Click to collapse
Hey there again,
Thank you very much for the time. I am in SE Europe, to be more precise Republic of Kosovo. My SIM is from Kosovo ( we are considered i believe to be in Europe carrier wise)
I do need help flashing the phone as i have no experience whatsoever i just recently switched from Iphone to Samsung, this being said i must also mention the fact that i would definitely need help. I dont want to mess up the phone i just got it like 2 days ago

Things to consider:
- You can flash both 950F and 950FD firmware on your 950FD.
- You need to find your desired firmware. And that region needs to match your sim card, use Updato or SamMobile but the firmware package is a >3GB file and takes a while to download. Make sure you only look for versions for model 950F or FD.
- You will need to download Odin and Samsung usb drivers to flash the firmware onto your phone. Follow the thread "OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S8 SM-G950F" for the guide.

Colonel_Kosova said:
Hey there again,
Thank you very much for the time. I am in SE Europe, to be more precise Republic of Kosovo. My SIM is from Kosovo ( we are considered i believe to be in Europe carrier wise)
I do need help flashing the phone as i have no experience whatsoever i just recently switched from Iphone to Samsung, this being said i must also mention the fact that i would definitely need help. I dont want to mess up the phone i just got it like 2 days ago
Click to expand...
Click to collapse
If you decided to go the "SIM card CSC" method then follow this step by step:
https://www.sammobile.com/forum/showthread.php?t=37711
But I personally think you should do it through flashing a firmware with odin but properly and pay attention to step 6:
https://www.sammobile.com/forum/showthread.php?t=37508
Hope they help you resolve your issues.
Good luck.

samteeee said:
If you decided to go the "SIM card CSC" method then follow this step by step:
https://www.sammobile.com/forum/showthread.php?t=37711
But I personally think you should do it through flashing a firmware with odin but properly and pay attention to step 6:
https://www.sammobile.com/forum/showthread.php?t=37508
Hope they help you resolve your issues.
Good luck.
Click to expand...
Click to collapse
Again thank you very much for everything i do have one last question please. Regarding the step 6 should i do it or not i am not sure

Colonel_Kosova said:
Again thank you very much for everything i do have one last question please. Regarding the step 6 should i do it or not i am not sure
Click to expand...
Click to collapse
Yes, if you are changing country/code of CSC, then the system needs to recalculate the partitions.
And don't forget no short cuts! Every step should be done.
Good luck.

ooo man this things is killing me now the problem i have after i have rooted the phone is that the computer wont recognize my phone in download mode ??????????

Hey Peeps,
Small update on how things are for the time being. I have been following all steps as described with odin. Last night i had issues with my laptop not recognizing my phone in download mode, got rid of this issue by changing laptops. Once the procedure was finished i ended up with the same thing on my phone???
I have flashed a european software ( from france) but still no go on removing or changing the region!!!
To be honest dont really know what to do again help is appreciated since that date thing is really annoying

Any other way to get rid of khor on aod/aos
Went through the whole thread. Def not keen to flash or run csc. Any other way to turn off khor date from aod? Help !!!

Hey there all, again just a quick thank you for the tips and tricks. To be honest i dont really know what i did exactely but it worked for me.
What did the change by me was the first step, namely: https://www.sammobile.com/forum/showthread.php?t=37711
i really cant tell how but it worked ( used a sim card i have from Slovenia)
till the next one thank you again

Questions about official firmware flashing

Hi all, not had a Samsung phone since the first Note so cant remember a thing about flashing/de-branding on these aside from Odin and I know things might be different now with Knox.
So I've just ordered a Vodafone S8 in the UK and I'm considering switching firmware when it comes to an unbranded one but was hoping someone could point me to a good guide of where to get the firmwares (and which one to use) for the latest updates etc.
Is this still a fairly easy job and doable without unlocking and rooting/tripping knox? Do you lose access to wifi calling on unbranded phones on Vodafone?
Thanks

Go to updato.com and search firmwares for the G950U1 (If those are the snapdragon variant). I always use the XAA as it's not specific to any carrier.
It's still the same method but I'd use the modded Odin which has been posted around here, rename each file and remove .md5 from the end of them. From there it all matches up. BL, AP, Etc. When flashing the csc file, HOME CSC will NOT wipe your device after flash, CSC WILL wipe it. You'll want to wipe initially anyway.
It doesn't trip Knox and you'll lose wifi calling and volte

joe3681 said:
Go to updato.com and search firmwares for the G950U1 (If those are the snapdragon variant). I always use the XAA as it's not specific to any carrier.
It's still the same method but I'd use the modded Odin which has been posted around here, rename each file and remove .md5 from the end of them. From there it all matches up. BL, AP, Etc. When flashing the csc file, HOME CSC will NOT wipe your device after flash, CSC WILL wipe it. You'll want to wipe initially anyway.
It doesn't trip Knox and you'll lose wifi calling and volte
Click to expand...
Click to collapse
He's got a g950f which is the European model(exynos)

Thanks for the info, i did a little more research myself and looking at my software version it says SAOMC_SM-G950F_OXM_BTU_0062
My CSC's are listed as BTU/BTU/BTU which as far as im aware means its already the unlocked version correct? There was no vodafone junk preinstalled but wifi calling shows up as working. So im a little lost now, I dont think i need to do anything and I have wifi calling so all seems ok.

Oblox said:
Thanks for the info, i did a little more research myself and looking at my software version it says SAOMC_SM-G950F_OXM_BTU_0062
My CSC's are listed as BTU/BTU/BTU which as far as im aware means its already the unlocked version correct? There was no vodafone junk preinstalled but wifi calling shows up as working. So im a little lost now, I dont think i need to do anything and I have wifi calling so all seems ok.
Click to expand...
Click to collapse
Where did you get your S8 from, direct from Vodafone? I've had mine for about 6 weeks now and got mine from Vodafone direct and my CSC is VOD, my current firmware is:
G950FXXU1AQH3
I was just looking into flashing mine with the BTU firmware so I can get the Oreo beta.
Sent from my SM-G950F using Tapatalk

I got mine from www.mobilephonesdirect.co.uk they told me it wasn't unlocked so I assumed that meant it came from Vodafone. Not tried any other SIM in it yet to test that side.
Wifi calling definitely works, there's no vodafone crap installed no branding anywhere.
According to
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/VOD/
there is G950FXXU1AQI7 for the Vodafone branded CSC im on G950FXXU1AQH3 for BTU.

Oblox said:
I got mine from www.mobilephonesdirect.co.uk they told me it wasn't unlocked so I assumed that meant it came from Vodafone. Not tried any other SIM in it yet to test that side.
Wifi calling definitely works, there's no vodafone crap installed no branding anywhere.
According to
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/VOD/
there is G950FXXU1AQI7 for the Vodafone branded CSC im on G950FXXU1AQH3 for BTU.
Click to expand...
Click to collapse
Ah, I see so yours is definitely unlocked then as I've purchased from them before, same as CPW.
Yes I've checked samfirmware too, I will need to flash the older BTU firmware then by looks of it, however I need to look into it a bit more as I've read somewhere that flashing the S8 is a bit different.