if you are stuck in boot loop or having difficulty starting your phone, don't worry, there should be a way.
I have experienced this issue today after flashing wrong file causing my phone to stuck in boot loop. after searching in this forum and after spending over 3 hours, I finally managed to restore my phone and it is now working perfectly fine.
therefore, I thought of making a basic guide to try to resolve such issues. please note, this is a very basic guide to resolve problems with starting your phone, I am not professional but will try to share my experience and help anyone in need. this was done on X10i
lets start:
1- if you have a recent back up and have access to xrec, you can simply restore your phone
2- if you have access to xrec but don't have a backup, try to flash a new ROM
I tried the previous two steps but it kept saying can't mount SD, therfore try the following
3- if you don't have xrec access, use the flash tool
download from here http://www.multiupload.com/7H4JT35B6G
then flash generic 2.1 to your x10, I used this one http://www.mediafire.com/?sqv6274anzfzn2x
here is the guide on how to do it http://forum.xda-developers.com/showpost.php?p=10879528&postcount=3
I have had problem saying "install or re-install drivers", you just need to install the file in the drivers folder in the flash tool main folder and restart the flash tool program
4- after flashing this ROM, restart your phone and root it using the flash tool, after the root your phone will restart, then you need to ask for premession and click xrec to install xrec to your phone
5- before installing new ROM, please make sure that your baseband and karnel is compatible with it (because the ROM you flashed earlier has old karnel and you will be stuck again in the boot loop if you flashed 2.3.3 just like me, then you will need to start again and install new karnel before instaling 2.3.3 ROM or even restore 2.3.3 ROM)
(you can simply install the new ROM then restart in flash mode and flash the new karnel .71 or flash the karnel and restore your backup)
I know that my choices of flash tool version or generic 2.1 version might not be the best, but I used them and resolved my issue and hope it will resolve yours. for any question please do not hesitate to ask me.
credits to everyone who helped, I can't remember everyone because I read quite a lot so please forgive me
nice post my friend
In flash tool I'm getting an error:
ERROR - USB\VID_0FCE&PID_ADDE\5&2BFAB030&0&5
any idea what to do?
it sounds to me that u may need to install the semc flash drivers.. inside the flashtool u may find a folder named drivers, go inside of that folder and install ggsetup.. also do u have pc companion installed?
tripico said:
In flash tool I'm getting an error:
ERROR - USB\VID_0FCE&PID_ADDE\5&2BFAB030&0&5
any idea what to do?
Click to expand...
Click to collapse
can you post the log from the flash tool so I can see at which step exactly this massage came up
I am fairly novice when it comes to flashing so here's a pretty dumb question:
I have an X10a, can I use the X10i software that you've linked in your post or is it just going to brick my phone.
Hello fellows. I am in a deep sh&*. Maybe someone can help.
I have a p10+ L09 converted to L29, rooted, bootloader unlocked. It was on rooted stock rom. Yesterday, tried to make the update, and something went wrong. Now, I can't install any rom exept future rom or something found here. I've tried rayglobe knife, Huawei multi tool, eRecovery, dload, and no way to install an official rom. I am barely able to install twrp, format data, and install future rom before rebooting.
Tried to extract boot, cust, system from the original rom, but it says finished and bootloop just after the unlocked message. On latest versions, I cant even find them in the update.app..
Any help, any downloadable file or link is really appreciated. Please help...
dj_varizes said:
Hello fellows. I am in a deep sh&*. Maybe someone can help.
I have a p10+ L09 converted to L29, rooted, bootloader unlocked. It was on rooted stock rom. Yesterday, tried to make the update, and something went wrong. Now, I can't install any rom exept future rom or something found here. I've tried rayglobe knife, Huawei multi tool, eRecovery, dload, and no way to install an official rom. I am barely able to install twrp, format data, and install future rom before rebooting.
Tried to extract boot, cust, system from the original rom, but it says finished and bootloop just after the unlocked message. On latest versions, I cant even find them in the update.app..
Any help, any downloadable file or link is really appreciated. Please help...
Click to expand...
Click to collapse
What error/behaviour are you getting from erecovery?
Plop
Hello mate. Thanks for your time.
ERecovery crash everytime at 5%. If I try to download via erecovery, it doesn't download.
I've tried to extract the files from update. App, and inject them via fastboot. It goes to the end of the operation, but once rebooted, it bootloop before the Huawei logo..
I don't understand what happens.. It's like if the phone don't want the original firmware anymore..
If you have any files to propose me, I really want to try tonight...
Can you somehow recover your original oeminfo with TWRP and retry erecovery? That's how I got out of a similar situation, although I can't say for sure whether I really had the same root cause.
Hmm not sure that the oem info is ok or corrupted...
That's what I am affraid of..
I will try in a moment to see..
If it's corrupted, that means the phone is dead?
In that case you could try funkyhuawei, they provide their own oeminfo and erecovery connection. They do cost money though.
May I ask what makes you want to go away from the fromfuture ROM?
This... Android 5.1, emui 3.1
I don't know if iam becoming stupid with age, but can't find any more recent... And with the kids yelling on my back.... Lol
Well, I found a recent rom from future. Had some troubles with Android locking magisk, but now it's working ( update magisk before putting your Gmail account and restore). For now it's working fine. Just had a few freezes here and there but since this morning it's going fine. I think I'll stay with it for now.
Thanks for the people who tried to help me.
XDa rules!
Hello eveybody.
I have a question. Actually I have more .. a lot, but for now:
Up to what buildnumber is it possible to root the P8 Lite?
(Because I had B605 and tried to root it but failed. Got stuck in logo, and now I have stock rom B609.
Still trying to root but get all kind of errors and weird things I dont understand ... I am a newbie at this though.)
Oh, also what else do i need to do before trying to root for the tenth time ? (Log out of Huawei account? reset facory settings? ... or anything?)
Kind regards,
TommyWhite
TommyWhite said:
Hello eveybody.
I have a question. Actually I have more .. a lot, but for now:
Up to what buildnumber is it possible to root the P8 Lite?
(Because I had B605 and tried to root it but failed. Got stuck in logo, and now I have stock rom B609.
Still trying to root but get all kind of errors and weird things I dont understand ... I am a newbie at this though.)
Oh, also what else do i need to do before trying to root for the tenth time ? (Log out of Huawei account? reset facory settings? ... or anything?)
Kind regards,
TommyWhite
Click to expand...
Click to collapse
Your can error every versions... I'm on B610 and have rooted it with Magisk... I guess you already have rooted it before so you're not new to this... Well anyway, to root you must have TWRP recovery, and the root file... Boot into recovery mode and simply flash the root file...
What error did you get while rooting on B605?
You probably got stuck in boot animation because you flashed superSU in system mode. It should be installed in system-less mode. Magisk will install only in system-less mode and I think it's better at passing the safetynet.
amageek said:
Your can error every versions... I'm on B610 and have rooted it with Magisk... I guess you already have rooted it before so you're not new to this... Well anyway, to root you must have TWRP recovery, and the root file... Boot into recovery mode and simply flash the root file...
What error did you get while rooting on B605?
Click to expand...
Click to collapse
Thanks for replying :good:
What do you mean with "Your can error every versions..."? .. Do you mean you can root every version?
I am very new to this. Half of the time I dont know what the H im doing, and all of the time I only have a slight idea of what is going on in the Phone. For example I dont even know what a root file is, could you tell me?
How did you root with Magisk if I may ask? And whats the difference with SuperSu?
I had all kinda errors and issues along the way from B605 to B170 and B123 Android 5 back to 6 and B609. (I could make a thread of it ... maybe it helps others???)
Because today I finaly rooted my Phone.
Weirdly enough root checker basic sais it isnt but other root checkers say it is (and my device itself said after reboot that it was) ... so what to make of that?
Can I update the Phone now its rooted without unrooting it?
@keikari
Thanks for responding.
But im afraid I cannot quite follow you.
Could you explain a bit more please?
(Can you also maybe read the last bit of my other reply?)
TommyWhite said:
@keikari
Thanks for responding.
But im afraid I cannot quite follow you.
Could you explain a bit more please?
(Can you also maybe read the last bit of my other reply?)
Click to expand...
Click to collapse
You can't update phone which is rooted(as far as I know).
Do you have TWRP recovery installed?
If you had TWRP installed and you rooted by flashing SuperSu(this is what other guy meant with "root file"). By default SuperSu installs in system mode(meaning it does it thing into system partition). You need to install other zip file first to make it install system-less mode(meaning it does it thing into boot partition).
Magisk is also flashable zip and similiar to SuperSU. If you use apps that need to pass safetynet(like netflix) you want to root with magisk.
Don't know did that helped at all. It's hard to explain when I only know how to use it but don't know why/how it works : D
And if you don't mind doing factory reset before updating, you can also install official updates in TWRP.
Uhhhmmm ok. Well I had to copy eu.chainfire.supersu-1 folder from boot folder to system folder so I dont know what to call that than.
I have TWRP now yes thank you.
But I dont understand about safetynet, coz I just tried Netflix and it works just fine ... and I got SuperSu not Magisk.
By the way when I press on SuperSu nothing happens ... how come?
Also your telling me that I can install official update with TWPR without unrooting it?
And, if you dont mind telling me, whats better to make backup with TWPR or Titanium backup?
While im at it ... if I make a backup of rooted Phone and accidently unroot it by update or something cant i just restore the backup to unroot it again?
Thanks in advance, sorry for the many questions. (Ill learn a lot; )
1. I don't think you can just copy superSu stuff(though not 100% sure, I rarely do things manually if I don't have to. Mostly because lack of knowledge : D )
2. Maybe stock rom passes safety net and it's nothing to really think about as an user. Because if everything works like you want -> no reason to care. If doesn't work -> now you care and you can find answer since you have something to look for
3. Root isn't actually thing you can loose. It's thing that you just install in the rom. As user you can think it like an app.(which just has to be installed a bit differently).
4. When you press SuperSu, Supersu app should open (maybe your copying broke it)
5. TWRP is to back up whole rom(or some partitions). Like if you "soft brick" your device or format system/boot/data partition you can restore it back exactly like it was with TWRP backup. You should do this every time you install new rom or some stuff that modifies system like xposed. It saves time and nerves if things don't work.
5.1 Titanium back up is to back up app and/or app data(like progress in games). This is good if you are changing rom or wanting to re-install your current rom.
6. You'll soon understand the actual concept of the root. Like with p8lite only thing you need to worry is that you have unlocked bootloader. Which you should have since you were able to install TWRP.
7. About installing firmware in TWRP is kind of easier, because stock method will need non-rooted firmware and only few exactly correct firmwares can be installed on top of your current firmware. With TWRP you can even install roms from other kirin 620 devices. (My phone is honor 4x, but I used to use p8lites firmwares because it had more updates) TWRP updating will wipe data.
Happy to help. I think I answered most of your questions in that, ask if you need better details. It would be hard to write guide that has all basics explained the way it would be easy to understand, you'll learn faster when you keep trying and ask question as they come(like you have) at some point you will do something wrong and be like **** this **** and start over again. Then it will became easier and you will also learn that it's difficult to actually brick this phone(some people are too scared about it and few have succeeded in it, but no idea how : D) )
Thanks for using actual english in your questions. :good:
TommyWhite said:
Uhhhmmm ok. Well I had to copy eu.chainfire.supersu-1 folder from boot folder to system folder so I dont know what to call that than.
I have TWRP now yes thank you.
But I dont understand about safetynet, coz I just tried Netflix and it works just fine ... and I got SuperSu not Magisk.
By the way when I press on SuperSu nothing happens ... how come?
Also your telling me that I can install official update with TWPR without unrooting it?
And, if you dont mind telling me, whats better to make backup with TWPR or Titanium backup?
While im at it ... if I make a backup of rooted Phone and accidently unroot it by update or something cant i just restore the backup to unroot it again?
Thanks in advance, sorry for the many questions. (Ill learn a lot; )
Click to expand...
Click to collapse
By default, SuperSu installs root in system mode. It will fail the SafetyNet test (which checks if the android system is modified or not if it fails, you can't run SnapChat and Android Pay will not work too). If you root by Magisk, the SafetyNet test will pass..
To make it clear, since you have TWRP, download the Root file (SuperSu or Magisk) and then flash the root file from TWRP... Copying and pasting won't work.
These are the files: SuperSu v 2.78 and Magisk v 13.3.. Download either of these files and flash through TWRP..
And yes, I meant you can root...
---------- Post added at 01:08 ---------- Previous post was at 01:04 ----------
To answer your other question, when you update your phone it will unroot it... You can root it again by simply flashing those files...
Do Refer the MEGA Thread for more information... Banakafallata has explained everything neatly...
amageek said:
By default, SuperSu installs root in system mode. It will fail the SafetyNet test (which checks if the android system is modified or not if it fails, you can't run SnapChat and Android Pay will not work too). If you root by Magisk, the SafetyNet test will pass..
To make it clear, since you have TWRP, download the Root file (SuperSu or Magisk) and then flash the root file from TWRP... Copying and pasting won't work.
These are the files: SuperSu v 2.78 and Magisk v 13.3.. Download either of these files and flash through TWRP..
And yes, I meant you can root...
Click to expand...
Click to collapse
Isn't magisk 14 https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 better than 13.3 or does it have some bugs?
keikari said:
Isn't magisk 14 https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 better than 13.3 or does it have some bugs?
Click to expand...
Click to collapse
Yes but I haven't uploaded the file in my Mega Cloud... He can update it ..
keikari said:
1. I don't think you can just copy superSu stuff(though not 100% sure, I rarely do things manually if I don't have to. Mostly because lack of knowledge : D )
2. Maybe stock rom passes safety net and it's nothing to really think about as an user. Because if everything works like you want -> no reason to care. If doesn't work -> now you care and you can find answer since you have something to look for
3. Root isn't actually thing you can loose. It's thing that you just install in the rom. As user you can think it like an app.(which just has to be installed a bit differently).
4. When you press SuperSu, Supersu app should open (maybe your copying broke it)
5. TWRP is to back up whole rom(or some partitions). Like if you "soft brick" your device or format system/boot/data partition you can restore it back exactly like it was with TWRP backup. You should do this every time you install new rom or some stuff that modifies system like xposed. It saves time and nerves if things don't work.
5.1 Titanium back up is to back up app and/or app data(like progress in games). This is good if you are changing rom or wanting to re-install your current rom.
6. You'll soon understand the actual concept of the root. Like with p8lite only thing you need to worry is that you have unlocked bootloader. Which you should have since you were able to install TWRP.
7. About installing firmware in TWRP is kind of easier, because stock method will need non-rooted firmware and only few exactly correct firmwares can be installed on top of your current firmware. With TWRP you can even install roms from other kirin 620 devices. (My phone is honor 4x, but I used to use p8lites firmwares because it had more updates) TWRP updating will wipe data.
Happy to help. I think I answered most of your questions in that, ask if you need better details. It would be hard to write guide that has all basics explained the way it would be easy to understand, you'll learn faster when you keep trying and ask question as they come(like you have) at some point you will do something wrong and be like **** this **** and start over again. Then it will became easier and you will also learn that it's difficult to actually brick this phone(some people are too scared about it and few have succeeded in it, but no idea how : D) )
Thanks for using actual english in your questions. :good:
Click to expand...
Click to collapse
Thank you very much for helping and letting me feel at ease with that last bit! Buttuhm if I used Dutch I dont think I would get very much help here, but thanks for thanking me (My English is not so good though)
Sorry for the late responce. Ive been busy ... also with reading and searching ... but seems like the more I read the more questions I get.
Anyways:
1. In the tutorial I finally tried it said in the end "7. Now open /device/data/app and locate folder eu.chainfire.supersu-1 cut and paste in folder /device/system/app with following rights rwx r-x r-x" and it worked. (Im not sure weither I may post the link of that tutorial here. Its some blogspot.)
2. Mobile banking doesnt work anymore. It sais it doesnt recognize my device ... so If its not to hard to switch to Magisk, I would like that.
3. But I cannot just uninstall SuperSu and install Magisk now can I? (Im trying to figure that out, among all the other stuff new to me.)
4. Lol ye I have been a bit of an idiot there or drunk or something, cause it works just fine.
5. Ok so it makes an images of your whole device so to speak, right? But I guess TWRP will be gone after a official update or a stock ROM is installed? When I make a back up with TWPR it names it date Balong500311 or something. I had the Balong bug several days ago but its gone now ... I hope. In aida64 it sais Board: Balongv8r1sft and in project menu it sais CP version: some number (balong) ... its very strange.
5.1 So TWRP is better it backs up everything.
6. Ok, but I wanna know .. Everything!!!! :victory:
7. I dont understand your first sentence here at all. (Remember im realy realy new to this. For to new to be going installing ROMs from other devices )
amageek said:
By default, SuperSu installs root in system mode. It will fail the SafetyNet test (which checks if the android system is modified or not if it fails, you can't run SnapChat and Android Pay will not work too). If you root by Magisk, the SafetyNet test will pass..
To make it clear, since you have TWRP, download the Root file (SuperSu or Magisk) and then flash the root file from TWRP... Copying and pasting won't work.
These are the files: SuperSu v 2.78 and Magisk v 13.3.. Download either of these files and flash through TWRP..
And yes, I meant you can root...
---------- Post added at 01:08 ---------- Previous post was at 01:04 ----------
To answer your other question, when you update your phone it will unroot it... You can root it again by simply flashing those files...
Do Refer the MEGA Thread for more information... Banakafallata has explained everything neatly...
Click to expand...
Click to collapse
Yes thank you. But I finally rooted it after a bunch of trouble. Softbricks, balong bug, all kinds of errors and issues. And I was finally able to root it in a very strange way ... and almost accidentally. And not with the newest TWRP (does that matter?) nor the newest SuperSu. When I flashed the newest SuperSu in not the newest TWRP it got softbricked.
So Im a bit ... uhm more cautious now hoping it will all go more smoothly from now on.
I will search Banakafallata's thread.
Oh by the way. You have B610 right? Do you still have the local update function in the menu of updater?
TommyWhite said:
Yes thank you. But I finally rooted it after a bunch of trouble. Softbricks, balong bug, all kinds of errors and issues. And I was finally able to root it in a very strange way ... and almost accidentally. And not with the newest TWRP (does that matter?) nor the newest SuperSu. When I flashed the newest SuperSu in not the newest TWRP it got softbricked.
So Im a bit ... uhm more cautious now hoping it will all go more smoothly from now on.
I will search Banakafallata's thread.
Oh by the way. You have B610 right? Do you still have the local update function in the menu of updater?
Click to expand...
Click to collapse
Great to know that you've rooted, though by some weird way... It doesn't matter much, the difference between older and newer SuperSU is very less... But for TWRP, newer lets you flash stock update.zip whereas older doesn't...
https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
Do read this
amageek said:
Great to know that you've rooted, though by some weird way... It doesn't matter much, the difference between older and newer SuperSU is very less... But for TWRP, newer lets you flash stock update.zip whereas older doesn't...
https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994
Do read this
Click to expand...
Click to collapse
Ok that will not unroot my device right? Ill do that tommorow, its very late here in Holland ... 3:40 am???
Do you still have the local update function in the menu of updater in B10 (your device)? Id like to know ver much pls.
Thanks in advance!
TommyWhite said:
Ok that will not unroot my device right? Ill do that tommorow, its very late here in Holland ... 3:40 am???
Do you still have the local update function in the menu of updater in B10 (your device)? Id like to know ver much pls.
Thanks in advance!
Click to expand...
Click to collapse
No, the local update option is not there from Marshmallow onwards. But you can flash a zip for it too... Yes, updating your device to newer build (updates) will unroot your device... But you can root it again
TommyWhite said:
Thank you very much for helping and letting me feel at ease with that last bit! Buttuhm if I used Dutch I dont think I would get very much help here, but thanks for thanking me (My English is not so good though)
Sorry for the late responce. Ive been busy ... also with reading and searching ... but seems like the more I read the more questions I get.
Anyways:
1. In the tutorial I finally tried it said in the end "7. Now open /device/data/app and locate folder eu.chainfire.supersu-1 cut and paste in folder /device/system/app with following rights rwx r-x r-x" and it worked. (Im not sure weither I may post the link of that tutorial here. Its some blogspot.)
2. Mobile banking doesnt work anymore. It sais it doesnt recognize my device ... so If its not to hard to switch to Magisk, I would like that.
3. But I cannot just uninstall SuperSu and install Magisk now can I? (Im trying to figure that out, among all the other stuff new to me.)
4. Lol ye I have been a bit of an idiot there or drunk or something, cause it works just fine.
5. Ok so it makes an images of your whole device so to speak, right? But I guess TWRP will be gone after a official update or a stock ROM is installed? When I make a back up with TWPR it names it date Balong500311 or something. I had the Balong bug several days ago but its gone now ... I hope. In aida64 it sais Board: Balongv8r1sft and in project menu it sais CP version: some number (balong) ... its very strange.
5.1 So TWRP is better it backs up everything.
6. Ok, but I wanna know .. Everything!!!! :victory:
7. I dont understand your first sentence here at all. (Remember im realy realy new to this. For to new to be going installing ROMs from other devices )
Click to expand...
Click to collapse
1. Oh, I just realized that that copy was to make superSU a system app instead of user app. (This only affects superSU app, not other stuff it installs) If you install SuperSU in system mode it will cause bootloop.
2. I guess you can try use superSu uninstaller or try to uninstall from superSU app. Then just go magisk thread and download latest stable magisk and install it in TWRP. You can take backup of boot partition if you want so it will be easy to fix if you get bootloop.
5(I guess). Yes, you're right.
You can always get to bootloader mode and just flash TWRP again. I'm not sure is there any reason to care about balong "bug". I guess it might prevent updating with stock method and maybe some cust partition related stuff but I know almost nothing about that.
5.1 If you want to change rom and it's sometimes good to do facotry reset before installing new rom. In this case you need titanium backup to have app progress saved.
6. All I know about rooting is that you install magisk or superSU and then use it(so can't help with anything deeper) : D
7.I'll try again, but shorter
Normal update method only allows you to update on an unmodified firmware(Non-rooted) and it does kind of strict version checking.
If you are ok with doing factory reset before installing you can download update with/from "firmware finder"(can be found somewhere from this devices forum and probably also from honor 4x and 4c forums) to install update in TWRP(zip files from firmware finder have update-script in them. Official site updates doesn't have it.) This way there is no version checking. If you are doing this remember to reboot recovery when installation is done(it will go to stock recovery) and to factory reset. Then you can flash TWRP and do rooting stuff.
I wrote this a bit tired, so I hope the words are in order which they might make some sense.
amageek said:
No, the local update option is not there from Marshmallow onwards. But you can flash a zip for it too... Yes, updating your device to newer build (updates) will unroot your device... But you can root it again
Click to expand...
Click to collapse
Ok. But I tried local update by pressing vol up + vol down and powerbutton and it tried to update but failed.
Now I'm glad it failed coz it would have unrooted my phone as I understand.
Did it fail coz the phone is rooted? Or is that pherhaps because of what keikari said: "only few exactly correct firmwares can be installed on top of your current firmware"? That I cant update from B09 to B10.
keikari said:
1. Oh, I just realized that that copy was to make superSU a system app instead of user app. (This only affects superSU app, not other stuff it installs) If you install SuperSU in system mode it will cause bootloop.
2. I guess you can try use superSu uninstaller or try to uninstall from superSU app. Then just go magisk thread and download latest stable magisk and install it in TWRP. You can take backup of boot partition if you want so it will be easy to fix if you get bootloop.
5(I guess). Yes, you're right.
You can always get to bootloader mode and just flash TWRP again. I'm not sure is there any reason to care about balong "bug". I guess it might prevent updating with stock method and maybe some cust partition related stuff but I know almost nothing about that.
5.1 If you want to change rom and it's sometimes good to do facotry reset before installing new rom. In this case you need titanium backup to have app progress saved.
6. All I know about rooting is that you install magisk or superSU and then use it(so can't help with anything deeper) : D
7.I'll try again, but shorter
Normal update method only allows you to update on an unmodified firmware(Non-rooted) and it does kind of strict version checking.
If you are ok with doing factory reset before installing you can download update with/from "firmware finder"(can be found somewhere from this devices forum and probably also from honor 4x and 4c forums) to install update in TWRP(zip files from firmware finder have update-script in them. Official site updates doesn't have it.) This way there is no version checking. If you are doing this remember to reboot recovery when installation is done(it will go to stock recovery) and to factory reset. Then you can flash TWRP and do rooting stuff.
I wrote this a bit tired, so I hope the words are in order which they might make some sense.
Click to expand...
Click to collapse
Thanks again, I copied some bits to remember. I hope you were not tired of me not understanding things. You said I should just ask so here I go again
I understand most of what you wrote but:
TWPR can make a back up/an image of the device, right? But that image doesnt include apps and app data (or data at all?)? And Titanium doesnt back up firmware I guess.
So how do I make a backup of everything (except of the hardware) then?
Also Im in a dilemma about updating TWPR, because you said it will whipe data (what data actually?) and amageek said I need new TWPR for stock updates. So I need the "backup of everything first" I guess ... what to do? I have TWPR 3.0.2 now by the way.
Also cant I just download Magisk from Google Play now that my phone is rooted ... or is that being stupid?
7: Its strange, coz I remember I had my phone rooted (with the help of some old tutorial they should remove imo) but accidentally downgraded my phone with it to lollipop (one of the many failures I encountered ). But just with local updates B052 to B132 to B170 back to some 2KB B132 to marshmallow B609 ... something like that ... it was unrooted again.
Anyway, by update script you mean a script only TWPR can read?
And therefor TWPR does not check the version allready installed?
Is that correct?
But after this you say: "If you are doing this remember to reboot recovery when installation is done (it will go to stock recovery) and to factory reset.
Then you can flash TWRP and do rooting stuff."
I dont get that, coz that means you have to start all over again ... or do I miss something?
Im sorry, im doing the best I can.
TommyWhite said:
Ok. But I tried local update by pressing vol up + vol down and powerbutton and it tried to update but failed.
Now I'm glad it failed coz it would have unrooted my phone as I understand.
Did it fail coz the phone is rooted? Or is that pherhaps because of what keikari said: "only few exactly correct firmwares can be installed on top of your current firmware"? That I cant update from B09 to B10.
Click to expand...
Click to collapse
Do you have have stock recovery or TWRP recovery? If you have TWRP recovery then fish stock recovery and then try updating again...
I wanted to flash my huawei p10 plus, and by mistake I put the rom of p10, when turning on the phone has no network and the installed version is ONYX d188, it turns on normal, but when I put the program does not install anything, but from the fastboot bat if you can install the twpr, but I can not install the rom vky that is the p10 plus. it loads all the files to me but when installing the recovery for reboot and installation does not do it, it says that it does not find them. Through the bat file, I do not install recovery or oeminfo or anything, but through fastboot, I can install the twpr, and the recovery, as I see the problem is in the oeminfo, is there any way to reinstall by fastboot?
Will there be any way to install the oeminfo?
Can somebody help me?
i had the same problem. flashed my p10+vky to vtr. and im not able to come back. tell me if you find a solution please
keoxtia said:
i had the same problem. flashed my p10+vky to vtr. and im not able to come back. tell me if you find a solution please
Click to expand...
Click to collapse
I solve it!
the problem was that the .bat did not recognize the cell phone. but if the file is renamed, it will recognize it without problem. the answer is in this forum: https://forum.xda-developers.com/p10/help/error-message-hwota-t3676935 . and the procedure is normal for this forum: https://www.htcmania.com/showthread.php?t=1308963 just rename the hwota.sh.