Database Users

[VIDEO] Oneplus 2 Home Button completely Dead !

My Home button of the OPT is not giving signs of life. I got the OPT yesterday and it worked but after a clean install it stopped working.
It doesn't do Home Button Taks nor it reads fingerprints. It is simply DEAD! Help me please????
https://www.youtube.com/watch?v=o6ro4YtWwrw
I went through a process of rooting, however I'm still not rooted because no point of rooting if I have this problem.
Here's what happened:
After I unlocked the bootloader and flash TWRP, I went to TWRP and by mistake I wiped system as well. I was so nervous that I ended up wiping: System + Data + Dalvik + Cache + SD Card.
So after I had wiped everything off OPT, of course I had to download and flash manually Oxygen OS ! After I flashed it I set up the phone normally through Setup Wizard and when I was going to configure the Fingerprint, that's when it didn't work anymore. So, everything in the phone is working properly except for the Home Button.
So, do you think it could have anything to do with factory reset + System + SD Card and flashing Oxygen OS again? How could that damage the Home Button ALL functionalities? If not, read the final part of this thread:
The buttons on left and right of the Home Button work properly !
I followed these two Sticky Threads:
---> https://forums.oneplus.net/threads/oneplus-2-stock-rom-collection-updated-01-09.347627/
---> https://forums.oneplus.net/threads/...-custom-recovery-root-efs-backup-more.345478/
I have a theory which might help someone who reads this tell me if it could be it:
So, my OPT came with Oxygen OS 2.0.3 and as I wiped the system, I had to flash a ROM again. However it is only available Oxygen 2.0.2 in the Internet to download, which leads me to think that it was a firmware downgrade which led to this problem. Could this be it?
I am trying to solve this for 17 hours ! Please, if you have any idea how to help me, do not hesitate.
Thanks in advance for all of those who are reading this until the end and even more thanks to the ones replying to this thread !

This could really be due to a driver problem.
They may use different fingerprint readers on several devices.
Have you contacted the Oneplus support yet?

Jann F said:
This could really be due to a driver problem.
They may use different fingerprint readers on several devices.
Have you contacted the Oneplus support yet?
Click to expand...
Click to collapse
I have. But it will take many days, I wish I could fix it asap. So, I guess if it is a driver problem, clean flashing, etc will not do anything ever right?
I have flashed everything from zero serveral times, it just keeps not working

You could search for someone to give you the appropriate files or even a backup of /system
Try the OP forums too.

Jann F said:
You could search for someone to give you the appropriate files or even a backup of /system
Try the OP forums too.
Click to expand...
Click to collapse
I did... The exact same thread as this one lies now on the OP Forums. I guess i'm out of luck.

Same issues as above :| I have a couple backup phones but im still pissed off about this.

We have ruled it down to kernel changes in 2.0.3 vs 2.0.2

i am facing the same problem
my home Button completely gone....
wtf

Backup of /system 2.0.3 posted here

just updated to 2.0.3
same... home bottun STILL not working
basscheck12 said:
Backup of /system 2.0.3 posted here
Click to expand...
Click to collapse

madsatan said:
just updated to 2.0.3
same... home bottun STILL not working
Click to expand...
Click to collapse
If the problem is kernel related, guess you would need a back-up of /boot from 2.0.3 also

basscheck12 said:
If the problem is kernel related, guess you would need a back-up of /boot from 2.0.3 also
Click to expand...
Click to collapse
sorry... so what should i do ?? make a back up and boot it again ??
i updated to 2.0.3 and wipe and boot ...
still not working ....

madsatan said:
sorry... so what should i do ?? make a back up and boot it again ??
i updated to 2.0.3 and wipe and boot ...
still not working ....
Click to expand...
Click to collapse
No... The link I posted was for a back-up of /system but if the issue is kernel related you would also need a back-up of /boot where the kernel is located. Maybe @Jeftha could upload it for you.

basscheck12 said:
No... The link I posted was for a back-up of /system but if the issue is kernel related you would also need a back-up of /boot where the kernel is located. Maybe @Jeftha could upload it for you.
Click to expand...
Click to collapse
by the way
it happened after i flash cyanogen , then I returned to the oxygen 2.02,
but unfortunately it does not work now the home button , not the fingerprint reader , the ability to use it as a button . I lost some drivers or normal?
someone can help me please?

basscheck12 said:
No... The link I posted was for a back-up of /system but if the issue is kernel related you would also need a back-up of /boot where the kernel is located. Maybe @Jeftha could upload it for you.
Click to expand...
Click to collapse
Where can I find this file? When I did the TWRP backup I had boot, system and data partitions selected.

Jeftha said:
Where can I find this file? When I did the TWRP backup I had boot, system and data partitions selected.
Click to expand...
Click to collapse
Oh, I didn't realize you uploaded the entire back-up. Then you have already uploaded the file I was referring to.

having this same issue. home button just stopped working. nandroid back to 2.02 from 2.1 and still doesnt work. if anyone knows a fix please pass along the info

Quizo said:
having this same issue. home button just stopped working. nandroid back to 2.02 from 2.1 and still doesnt work. if anyone knows a fix please pass along the info
Click to expand...
Click to collapse
somehow i deleted all my os and blah blah blah
so i sideload my opt with OxygenOS 2.0 ( OnePlus2Oxygen_14_OTA_002_all_1507251956_wipe.zip)
and i got my home button back ...yay
then flashed the OxygenOS 2.0.2
still have a home button

Facing the same problem. Wasnt flashing one rom over other. Was on hydrogen OS for about 10 days now. Any true solutions to this problem? Does the above solution work?

I've got the same issue starting today. I'm on OxygenOS 2.1.1 with root.
Going back to stock without root to see if it fixes it but I think it's gotta be a hardware issue. Has anyone gone through the RMA process with OnePlus?

Data encryption issue after cm13

Hi folks, first off English is not my main modus operandi so bear with me thx.
I tried out every room there is for the VNS-L31, CM13 from here, Revolution RC3 from a Spanish forum, Beanstalk and a few others what where more glorified reskins ... anyway before installing CM13 I made a full dump on TWRP but wile forgetting I wasn't on stock but on Revolution RC3, so I ended up with the wrong encryption key for the DATA folder, pardon me internal memory SD ... RRC3 is based on the European Stock B150 with a lot of tweaks, also a not perfect encryption of the internal SD similarly to CM13 problem with the SD.
Here is the main beef I am having, after getting of CM I tried to restore my dump and ended up ****ing up the encryption of the internal memory card. Now I can't got back to say the 161 internalional version and I am kinda bound to the European L31900B versions of the stock rom if I install anything else the accounts like Google or Facebook are not working and anything not installed already on the phone is FC.
I can't format data because of the encryption. Not under fastboot or any of the trwps, tried 3 different ones, I checkted the phone is not frp. I did lock frp and bootloader again and unlocked them so to double make sure I was right on that one. I tried going back to stock with the dload method but no dice data still locked. Delete accounts with root explorer and went back to vnsl31900b130 what seams to be the firmware that I am stuck on now with the ****ed up encryption ....
I am used to flashing stuff left and right but this is new land for me any help would be greatly appreciate ... And my warning DONT SCREW WITH TGE ENCRYPTION ON YOUR PHONE ... ITS A *****!!!!

Cant you just delete the system in TWRP?

Thijs van Hal said:
Cant you just delete the system in TWRP?
Click to expand...
Click to collapse
Nope I deleted everything in TWRP, System, Cust, that is not a problem, the data partition on the other hand I can't format not I twrp, or by fastboot erase/format/-w commands ... Really annoying, never had an issue like this ... Funny that I can delete things with an root explorer under Android and that saving data works fine but the moment I leave the os it just closes up. Even the dump I made can't replace the data partition outside of the os

markus2811 said:
Nope I deleted everything in TWRP, System, Cust, that is not a problem, the data partition on the other hand I can't format not I twrp, or by fastboot erase/format/-w commands ... Really annoying, never had an issue like this ... Funny that I can delete things with an root explorer under Android and that saving data works fine but the moment I leave the os it just closes up. Even the dump I made can't replace the data partition outside of the os
Click to expand...
Click to collapse
Ive never seen that before to, weird man...

I have the same issue. Any fix?

Nemeroz said:
I have the same issue. Any fix?
Click to expand...
Click to collapse
No, but I am starting from scratch, also I am trying to manually corrupt the data partition so to be able to format it ... Just a pain, at the moment I am stuck, maybe if I can get someone else's firmware dump for my phone might do the trick its big so I am not sure anyone would upload something that big ... We see

markus2811 said:
No, but I am starting from scratch, also I am trying to manually corrupt the data partition so to be able to format it ... Just a pain, at the moment I am stuck, maybe if I can get someone else's firmware dump for my phone might do the trick its big so I am not sure anyone would upload something that big ... We see
Click to expand...
Click to collapse
Did you try to Flash stock recovery and do a factory reset?
Or via fastboot do this command :
fastboot format userdata
Sent from my HUAWEI VNS-L31 using XDA Labs

simo255 said:
Did you try to Flash stock recovery and do a factory reset?
Or via fastboot do this command :
fastboot format userdata
Sent from my HUAWEI VNS-L31 using XDA Labs
Click to expand...
Click to collapse
I tried all of them. Nothing worked :crying:

Nemeroz said:
I tried all of them. Nothing worked :crying:
Click to expand...
Click to collapse
So I fixed my problems with BadWolfs help he got me back to stock by flashing a special zip that allowed me to install the firmware from dload on the external sdcard
Thx again for your help

markus2811 said:
So I fixed my problems with BadWolfs help he got me back to stock by flashing a special zip that allowed me to install the firmware from dload on the external sdcard
Thx again for your help
Click to expand...
Click to collapse
Forgot here us the link http://www.htcmania.com/showthread.php?t=1261335
Everything you need to go back to stock from cm13 (if you screw up like me) or nougat beta is in here. Is in spanish but google translate is doing a pretty good job all bloody credit is going to badwolf and his friends
Thx and good night

markus2811 said:
Forgot here us the link http://www.htcmania.com/showthread.php?t=1261335
Everything you need to go back to stock from cm13 (if you screw up like me) or nougat beta is in here. Is in spanish but google translate is doing a pretty good job all bloody credit is going to badwolf and his friends
Thx and good night
Click to expand...
Click to collapse
when you flash the oem info didnt it say unable to mount data? like before?

RevolutionOS on Mi Max 3

Seems like they now support Mi Max 3, they say they removed antirollback from their roms. Is it any good? Can we trust this rom and this guys? I would like it better than .eu which also has antirollback. I'm on 9.6.7.0 China stable, so i believe i still don't have antirollback, so i'm searching for a custom rom.
https://miui.revtechs.me/en/mimax3/

https://forum.xda-developers.com/mi-max-3/how-to/treble-mi-max-3-t3827559/page10. See @SUPERUSER's review of it on page 10.

Seems like it has some problems with battery. A problem i had with mi note 2 and custom roms(i don't remember which one).
What is the last xiaomi.eu without antirollback?

Masacci0 said:
Seems like it has some problems with battery. A problem i had with mi note 2 and custom roms(i don't remember which one).
What is the last xiaomi.eu without antirollback?
Click to expand...
Click to collapse
Yes I will change back to xiaomi eu in a few minutes.
Came home right now.
I had to offline charge the phone because the amps in would not go over 7 or 800mA and definitely not 9V.
I watched youtube a few hours ago and I noticed that the battery level was still at 48% when I had it plugged in for like 20minutes so I decided to turn off the phone in order to fully charge it. And it had no issues charging while being turned off.
That is a huge setback. You can't use a rom that won't charge the phone.

If same as 8.9.14 on Redmi Note 5, ROS is MiuiPro renamed

Zanr Zij said:
If same as 8.9.14 on Redmi Note 5, ROS is MiuiPro renamed
Click to expand...
Click to collapse
You say they stole the work from the devs of MiuiPro?
---------- Post added at 16:19 ---------- Previous post was at 15:26 ----------
I am back on Xiaomi eu and fast charging works fine..so there's something broken in this rom.

SUPERUSER said:
You say they stole the work from the devs of MiuiPro?
---------- Post added at 16:19 ---------- Previous post was at 15:26 ----------
I am back on Xiaomi eu and fast charging works fine..so there's something broken in this rom.
Click to expand...
Click to collapse
check the way you flashed. I'm on RevOS as well and QC is working fine.

dinhvtai said:
check the way you flashed. I'm on RevOS as well and QC is working fine.
Click to expand...
Click to collapse
Might been something in the debloat script being removed, I dunno
I don't have more time to play with the phone and I'm happy on xiaomi eu

SUPERUSER said:
Might been something in the debloat script being removed, I dunno
I don't have more time to play with the phone and I'm happy on xiaomi eu
Click to expand...
Click to collapse
What's the last safe .eu without antirollback?

Masacci0 said:
What's the last safe .eu without antirollback?
Click to expand...
Click to collapse
Last safe and most stable is 8.8.9 eu.

SUPERUSER said:
Might been something in the debloat script being removed, I dunno
I don't have more time to play with the phone and I'm happy on xiaomi eu
Click to expand...
Click to collapse
anyway, I just want to say RevOS is a great rom, I'm using it without any problem. that's all

dinhvtai said:
anyway, I just want to say RevOS is a great rom, I'm using it without any problem. that's all
Click to expand...
Click to collapse
I found some time to flash the rom again.
I didn't bother with the debloat scripts and now the quick charge icon appears in the notification bar when plugging it in

SUPERUSER said:
I found some time to flash the rom again.
I didn't bother with the debloat scripts and now the quick charge icon appears in the notification bar when plugging it in
Click to expand...
Click to collapse
Clean install this time? Do anything different?

opasha said:
Clean install this time? Do anything different?
Click to expand...
Click to collapse
I did change the recovery from Orange Fox back to RedWolf because Orange Fox showed an error with no-verity-opt-encrypt every time after I flashed a rom that the script did not work.
And I did not flash the debloat zip file V1 and V2.
How I did step by step
Reboot to recovery
Format data
Reboot to recovery
Wipe everything except micro sd card
Reboot to recovery
Mount all partitions
Flashed no-verity-opt-encrypt-6.0.zip
Flashed the rom
Wipe dalvik and cache
Rebooted to the rom and let it settle down,
Rebooted to recovery again and flashed magisk
Rebooted to rom
Rebooted one more time to get rid of the rom being laggy.
Configured every app and uninstalled and froze the apps I did not wan't to use with Titanium backup
Rebooted after installing all modules in Magisk
Rebooted to recovery
Wipe dalvik and cache
Reboot to rom

SUPERUSER said:
I did change the recovery from Orange Fox back to RedWolf because Orange Fox showed an error with no-verity-opt-encrypt every time after I flashed a rom that the script did not work.
And I did not flash the debloat zip file V1 and V2.
How I did step by step
Reboot to recovery
Format data
Reboot to recovery
Wipe everything except micro sd card
Reboot to recovery
Mount all partitions
Flashed no-verity-opt-encrypt-6.0.zip
Flashed the rom
Wipe dalvik and cache
Rebooted to the rom and let it settle down,
Rebooted to recovery again and flashed magisk
Rebooted to rom
Rebooted one more time to get rid of the rom being laggy.
Configured every app and uninstalled and froze the apps I did not wan't to use with Titanium backup
Rebooted after installing all modules in Magisk
Rebooted to recovery
Wipe dalvik and cache
Reboot to rom
Click to expand...
Click to collapse
That's really strange about OrangeFox. Maybe report it to the dev in OrangeFox thread? They're quite good about fixing things.
Thanks for the details. What's the purpose of the no verity script? To enable encryption?
If you run into any further lag, I highly recommend you check out @mario_R's ressurected kernel. It's very good. (Edit: :laugh:, nevermind, looks like you're already using it)

SUPERUSER said:
You say they stole the work from the devs of MiuiPro?
---------- Post added at 16:19 ---------- Previous post was at 15:26 ----------
I am back on Xiaomi eu and fast charging works fine..so there's something broken in this rom.
Click to expand...
Click to collapse
Yes! MiuiPro is a paid Rom. Last time I tried ROS on Redmi Note 5, I did nandroid backup and it named as MiuiPro
You also can find easily that added mods same as MiuiPro Rom

To install revOS do i need also their latest firmware on the site?
Also, does it have Italian language?

Masacci0 said:
To install revOS do i need also their latest firmware on the site?
Also, does it have Italian language?
Click to expand...
Click to collapse
I installed the firmware because it was doing strange things to me. Come from a xiaomi.eu
Italian? Yes
The battery now I'm doing well. :good:

fendetestasxx said:
I installed the firmware because it was doing strange things to me. Come from a xiaomi.eu
Italian? Yes
The battery now I'm doing well. :good:
Click to expand...
Click to collapse
Everything done, but now if i go in sound and vibration on settings it gives error. Battery is not great(almost 10% in a night without using it). Very raw version as of now.
And can't also do or receive calls, maybe i have to install firmware, but if i do it will work even with other roms? Or every rom has its firmware?

Masacci0 said:
Everything done, but now if i go in sound and vibration on settings it gives error. Battery is not great(almost 10% in a night without using it). Very raw version as of now.
And can't also do or receive calls, maybe i have to install firmware, but if i do it will work even with other roms? Or every rom has its firmware?
Click to expand...
Click to collapse
I do not have any of those problems. I did clean installation and rom + firmware.
A full night consumes me 1%, when the xiaomi.eu consumes me much more.

GSI ROMs Lenovo Z6 Pro?

I was wondering if anyone tried installing a GSI Rom on this phone since the phone can have an unlocked bootloader and meets the minimum requirements. There is an android 10 GSI available.
https://www.xda-developers.com/android-10-custom-gsi-project-treble/

I tried a few ROMs, all of them went into "Qualcomm Crashdump Mode"
Maybe I'm not flashing it right, but the post says to just flash it into system...
I've tried:
Flashing GSI system alone
Flashing GSI then flash boot and vendor
Replacing a system img from a fastboot ROM with GSI
All of the flashes ended up with "Qualcomm Crashdump Mode"
maybe I'm doing it wrong...

yeah you missed to format data at 1st through twrp... it's a MUST before GSI flash ! but i can tell you that it's just time wasting... i tried almost all of them.... too many thing don't work really satisfying and/or messed up everything

kanschelskes said:
yeah you missed to format data at 1st through twrp... it's a MUST before GSI flash ! but i can tell you that it's just time wasting... i tried almost all of them.... too many thing don't work really satisfying and/or messed up everything
Click to expand...
Click to collapse
I did wipe data, in fact, I wiped data, cache, system, delvik, boot and storage, everything except my sd card...

threeeye said:
I did wipe data, in fact, I wiped data, cache, system, delvik, boot and storage, everything except my sd card...
Click to expand...
Click to collapse
you wipe or format data? It's not equal!

i told him already in pm

alexeei said:
you wipe or format data? It's not equal!
Click to expand...
Click to collapse
I honestly don't remember, I tried a few times, with a few different ways
So I can't tell for sure if I just wiped, formatted or factory reset... (I had a few beers in me...)
After failing with the GSI, I wanted to go back to the ROM that I was before (a fastboot_11.0.350)
But for some reason it didn't work, so I tried a few more options
After everything failed, I started to think that my phone it bricked, and I'll need to get a new phone...
But I managed to flash a 11.0.350_ST with QPST (first time that I managed to do it successfully)
So now I'm with this ROM, I don't like it so much, but it works...
I hope now you know why I can't remember if I did a wipe or a format...
kanschelskes said:
i told him already in pm
Click to expand...
Click to collapse
I checked my PM, I didn't see any messages...

I'm looking to consider buying this phone, I was surprised about it's price, can someone of you inform about how is GSI working in Z6 Pro? From my point of view no one stated that they're using GSI, after Qualcomm Bootscreen error. Thank you
Enviado desde mi Redmi Note 4 mediante Tapatalk

Marioh2451 said:
I'm looking to consider buying this phone, I was surprised about it's price, can someone of you inform about how is GSI working in Z6 Pro? From my point of view no one stated that they're using GSI, after Qualcomm Bootscreen error. Thank you
Enviado desde mi Redmi Note 4 mediante Tapatalk
Click to expand...
Click to collapse
You can use GSIs as long as your data is unencrypted. I've used many of them. The main issues are fingerprint, media over Bluetooth and DT2W not working so far.

descarao81 said:
You can use GSIs as long as your data is unencrypted. I've used many of them. The main issues are fingerprint, media over Bluetooth and DT2W not working so far.
Click to expand...
Click to collapse
Have these issues been resolved for GSI roms at this time? I'm asking because I'd love to replace the ROM on my K10 note/Z6 youth!

Pixel Experience Gsi stuck in bootloop , anyone any ideas ?

So i did a clean install , delete data+ caches+ system and stuck in a bootloop
Tried formating data , still stuck ..
Tried formating data then delete data + caches+ sytem and reinstalling image still stuck in the google logo ..
I have no idea what to do anymore ..

Imyou said:
So i did a clean install , delete data+ caches+ system and stuck in a bootloop
Tried formating data , still stuck ..
Tried formating data then delete data + caches+ sytem and reinstalling image still stuck in the google logo ..
I have no idea what to do anymore ..
Click to expand...
Click to collapse
I have not had much luck with that GSI but others have installed it easily.
Instructions are in the GSI thread.
https://forum.xda-developers.com/galaxy-a20/how-to/gsi-galaxy-a20-t3964546

physwizz said:
I have not had much luck with that GSI but others have installed it easily.
Instructions are in the GSI thread.
https://forum.xda-developers.com/galaxy-a20/how-to/gsi-galaxy-a20-t3964546
Click to expand...
Click to collapse
Yeah i dont know , i will try with a older version of the gsi

Imyou said:
Yeah i dont know , i will try with a older version of the gsi
Click to expand...
Click to collapse
I'm on MSM-Xtended 9

physwizz said:
I'm on MSM-Xtended 9
Click to expand...
Click to collapse
Is it any good ?
I got stuck on a bootloop on that too..
The only one that pleases me so far it's Havoc ..
And BTW do you know any Google camera we can install ?