Database Users

[MOD] MultiROM

this is beta release. for t900 only.
I'll write full instruction later. For full description see http://forum.xda-developers.com/show....php?t=2011403
I'm not sure that everything is stable, so I dont publish source code. I dont want to distribute buggy sources. thanks for understanding.
for stock firmware only. for now. use stock firmware as primary. you can flash cm as additional.
Installation:
1. https://yadi.sk/d/9t2yfkIPc7yPj - this is modded recovery. flash via odin (updated 19/10. Thanks to @arcadia2uk for fix flashing bug)
2. https://yadi.sk/d/TtXcwe6Hc54cR - patched stock kernel
https://yadi.sk/d/r2lnH3N3c54eF - multirom main program
flash through modded recovery patched kernel and multirom.
uninstallation:
https://yadi.sk/d/r9ZLm0vCc68um - flash this uninstaller through recovery, then flash original twrp
known issues:
- 1920x1200 resolution in twrp
- in List Roms installed roms dont shown
- in multirom boot menu touchscreen downt work. use buttons (vol-,vol+,power)
multirom apk from play store doesnt support this release.

reserved

more reserved

bonuzzz said:
this is beta release. for t900 only.
I'll write full instruction later. For full description see http://forum.xda-developers.com/show....php?t=2011403
I'm not sure that everything is stable, so I dont publish source code. I dont want to distribute buggy sources. thanks for understanding.
for stock firmware only. for now. use stock frimware as primary. you can flash cm as additional.
Click to expand...
Click to collapse
Nice, I have to try this later on. I noticed that after having installed CM11, I can no longer flash touchwiz (I deleted my back-up, as I no longer needed it...), why I probably have to start all over and use Odin to re-install stock and then install multi ROM on top of it. I will look into it once I get some time over.
When you are saying "stock firmware", could this be any customized touchwiz ROM?
PS the link to the MultiROM decription does not work, here is the correct one http://forum.xda-developers.com/showthread.php?t=2011403

arcadia2uk said:
Nice, I have to try this later on. I noticed that after having installed CM11, I can no longer flash touchwiz (I deleted my back-up, as I no longer needed it...), why I probably have to start all over and use Odin to re-install stock and then install multi ROM on top of it. I will look into it once I get some time over.
When you are saying "stock firmware", could this be any customized touchwiz ROM?
Click to expand...
Click to collapse
yes, every touchwiz rom
I have to recompile cm kernel to support multirom. I'll do it later. It depends on Valera's decision whether support t900 or not.

bonuzzz said:
this is beta release. for t900 only.
Installation:
1. https://yadi.sk/d/Sm4V4SMDc54ay - this is modded recovery. flash via odin
uninstallation:
https://yadi.sk/d/Sm4V4SMDc54ay - flash this uninstaller through recovery, then flash original twrp
Click to expand...
Click to collapse
It doesn't seem correct that the modded recovery and the installer has the same d/l link?
---------- Post added at 11:35 PM ---------- Previous post was at 10:52 PM ----------
bonuzzz said:
yes, every touchwiz rom
I have to recompile cm kernel to support multirom. I'll do it later. It depends on Valera's decision whether support t900 or not.
Click to expand...
Click to collapse
When trying to flash the recovery with Odin there's an error message saying that the MD5 Hash value is invalid, recovery_mr_t900.tar.md5 is invalid.

I recompiled recovery and refreshed links. try again to flash.

bonuzzz said:
I recompiled recovery and refreshed links. try again to flash.
Click to expand...
Click to collapse
Odin is still diplaying the message that md5 is invalid.
Maybe a file w/o md5 would work?

arcadia2uk said:
Odin is still diplaying the message that md5 is invalid.
Maybe a file w/o md5 would work?
Click to expand...
Click to collapse
unpack archive and try to flash recovery.img with flashify. maybe change version of odin. i use 3.09.3

bonuzzz said:
unpack archive and try to flash recovery.img with flashify. maybe change version of odin. i use 3.09.3
Click to expand...
Click to collapse
I renamed the tar file by taking away the .md5, that worked.
The boot with the stock ROM went fine. However, I tried install my cm11 by restoring a backup and got stuck, or so I thought it actually came to life after having looked a SOD for 5 min. so I guess it went well. Next problem is that when I'm on the MultiROM boot menu it doesn't give me the option to select the alternative ROM, but makes the countdown and then boots internal. There is no possibility for me to select my alternative ROM as the blue strip does not react to touch. Well, I hope you understand what I mean...
---------- Post added at 09:59 AM ---------- Previous post was at 09:29 AM ----------
bonuzzz said:
unpack archive and try to flash recovery.img with flashify. maybe change version of odin. i use 3.09.3
Click to expand...
Click to collapse
It might also be linked to the fact that the recovery is trying to validate the ROM as a v2awifi, while it should be v2wifixx on the T-900.
I assume the recovery.img need to be modified?
---------- Post added at 10:19 AM ---------- Previous post was at 09:59 AM ----------
It's actually as simple as touch mode that is disabled in the bootmenu, and you have to use up/down keys to select and power key to confirm your ROM choice (I bet it says this in the OP already...)
Now when that is cleared out it seem to be running great, but as I need to test drive another T-900 Rom I have to uninstall it as I need original TWRP to flash that ROM, due to the naming convention.
After all this gave me the opportunity to test the uninstaller that also worked well
.
So the only issue is the Recovery naming convention the T-900 should be v2wifixx.
This is how I came to have the v2wifixx:
TWRP 2.8.0.0 downloaded from http://www.techerrata.com/browse/twrp2/v2wifixx where I selected openrecovery-twrp-2.8.0.0-v2wifixx.img.tar and flashed it with Odin 3.07. This is the most common version for T-900 owners, as they followed the posted instructions HERE. It's also the version for which Valeria ported the cm-11.

I dont have t900, so i dont know these details
v2wifixx or v2awifixx?

bonuzzz said:
I dont have t900, so i dont know these details
v2wifixx or v2awifixx?
Click to expand...
Click to collapse
v2wifixx is the one. (no a after the 2)
But as I mentioned, apart from the small glitches you mention in the OP everything runs smoothly, and what a relief it is to quickly transfer between different ROMs. Great work, I just wished we had a decent touchwiz ROM for the T-900... Thank you, Great work (but I'm getting used to it ) With this, the only thing I had wished for is a 64G internal SD, rather than the 32G I have, unfortunately you can't perform miracles Bonuzzz.
I've been looking into MultiROM before, bet never saw the need for it, but after this experience I have also installed it on my HTC One (m8) which allows me to test ROMs quickly and smoothly, what a difference it makes.

Updated 10/18/2014 08:40am EST
Temporary work around:
1. backup you TouchWiz ROM* (TW),
2. install cm11(s) prior to MultiROM and make a backup,
3. recover your TW, and
4. proceed with MultiROM install after Bonuzzz's instructions in post 1
Once a fixed recovery is available, simply flash this new recovery image and you're good to go. As of that point you can update cm11 nightly's on the go.
HOW to Updating/changing ROMs
Primary ROM (Internal)
- Flash ROM's ZIP file as usual, do factory reset if needed (it won't erase secondary ROMs) (note: don't forget fixed kernel)
- Go to Advanced -> MultiROM in recovery and do Inject curr. boot sector.
Secondary Android ROMs
- If you want to change the ROM, delete it and add new one. To update ROM, follow these steps:
- Go to Advanced -> MultiROM -> List ROMs and select the ROM you want to update.
- Select "Flash ZIP" and flash ROM's ZIP file.
* I installed Bonuzz's Custom ROM 1.0.1 (for the P-900) and flashed his MultiROM kernel (see post 1) on top of it. And with no other modifications it seems to work perfectly well. I have only encountered a single minor issue, auto screen-rotation didn't work, but mine is always locked in landscape anyway. I froze the TouchWiz launcher and using Google Now Launcher instead, it couldn't be done w/o freeze, and also fixed an issue with incorrect cropping of my wallpaper. After all everything is good, and as always a great performance by Bonuzzz. Thank you/arc

reuploaded recovery. try again.

bonuzzz said:
reuploaded recovery. try again.
Click to expand...
Click to collapse
It looks like you accidentaly re-uploaded the same file, I have the same error message saying:
This package is for device: v2wifixx; this device is v2awifi.
E:Error executing updater binary in zip '/tmp/mr_update.zip'
Click to expand...
Click to collapse

arcadia2uk said:
It looks like you accidentaly re-uploaded the same file, I have the same error message saying:
Click to expand...
Click to collapse
you talked about multirom file but wrote recovery. i tried to find problem in wrong place.. redownload again

bonuzzz said:
you talked about multirom file but wrote recovery. i tried to find problem in wrong place.. redownload again
Click to expand...
Click to collapse
I sent you an e-mail about the problem a few minutes ago

Am I correct to assume that the only way to install cm-11 with gapps is by flashing a backup under MultiROM?
Or, at least until you can get the Advanced/MultiROM/List ROMs option corrected, since that seems to be to only place where you can flash a .zip on top of an existing ROM, and this install option only allow you to make a simple flash, or have I missed something?

bonuzzz said:
reuploaded recovery. try again.
Click to expand...
Click to collapse
Do I feel that you're abandoning this project, when you're this close....

[TUTORIAL] Easy way for UNLOCK Bootloader and flash TWRP 2.8.6.0 for MX4

All your actions with the phone is at your own risk. The authors are not liable. This is just your choice.
PLEASE read full instructions before you start.
RECOMMENDED ONLY FOR EXPERIENCED USERS.
This was tested ONLY on MEIZU MX4 and ONLY FIRMWARE 4.2.8.2A, ANY OTHER FIRMWARE/PHONE - YOU WILL RECEIVE BRICK PHONE.
(с)
ONLY FOR MEIZU MX4 AND ONLY FIRMWARE 4.2.8.2A. Don't use the that apk on Lollipop or your device will brick​
Hello everyone, i changed chinese apk for unlock bootloader, and replaced chinese recovery, on TWRP 2 8.6.0 recovery.
1. Download Flyme OS 4.2.8.2A stock firmware an official webpage Meizu
2. Flash it in stock recovery and select WIPE DATA
3. Get root permission
4. Download and install that APK - drive.google.com/open?id=0B_Gd_o_kBWgLNHFuZW5kMlFzV2s
5. Open that app, and provide root permission.
6. Press "Press to UNLOCK BootLoader" - and wait, you will see "Unlock Finished"
7. After, will be available recovery mode, and you press to "Enter Recovery Mode"
8. Your phone reboot and enters for normal recovery - TWRP 2.8.6.0.

Thanks for the great work!
At last we're getting closer to opening up our meizu phones.
Can the phone with this, unlocked bootloader flash "I" international roms from OTA?

How to relock?

ideosx5 said:
How to relock?
Click to expand...
Click to collapse
Reflash FLyme rom (with Flyme recovery, be carefull!)
Or flash stock uboot

Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
1. Installed apk method unlock (this thread).
2. Downloaded 4.5.7 "I" firmware, extracted and created system.img using (linux):
$ sdat2img system.transfer.list system.new.dat system.img
for windows, see this guide from Meizufans.
3. Boot into fastboot mode (now unlocked) using "VOL -" + "POWER"
4. fastboot flash boot boot.img
WAIT
fastboot flash system system.img
WAIT
5.Reboot into recovery
6. Full wipe
7. Install super su
8. Reboot
VOILA - 4.5.7 "I"
Remember to block/deactivate system updates once system has booted for first time.

Is it possible for someone to upload recovery.img of TWRP please ? I'd like to try
---------- Post added at 10:16 AM ---------- Previous post was at 09:22 AM ----------
I got it, I'm fixing the splash screen dimensions ahah^^
---------- Post added at 11:03 AM ---------- Previous post was at 10:16 AM ----------
It was a little harder than I expected but it's here : http://www.mediafire.com/download/26b963db1k489db/new-recovery.img

Learnincurve said:
Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
Click to expand...
Click to collapse
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261

And this method works even on newest firmware, let's say 4.5.6i downgraded to 4.2.8i via 4.0.4i? Or is a easy variant of previous method, patched uboot by meizu remains after 4.5.6i upgrade if i understand, no matter if you downgrate to Kitkat?

update for TWRP : http://www.mediafire.com/download/f6a65ccpgrfaopw/TWRPr5.img
Changelog :
I corrected "Select storage" position, corrected some shifts on the main screen

zaurikk said:
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261
Click to expand...
Click to collapse
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.

Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk

itresw said:
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.
Click to expand...
Click to collapse
i think, mx4 ubuntu touch version, and standard china version, - internal partitions(storage) name - different, so you gives write an error.

isko01 said:
Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Now it is impossible.

zaurikk said:
Now it is impossible.
Click to expand...
Click to collapse
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk

isko01 said:
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.

i tried on M2 note, i suppose it bricked.is it possible earlier condition working?i look up some unbrick videos, can repairs make my phone working?thanks.

No way to unbrick it, this is for MX4 not M2 Note !!! You'll need to change the motherboard, sorry

zaurikk said:
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.
Click to expand...
Click to collapse
Thanks to all user's who making this for MX4. They are really engineers! I hope they will try for MX5.
Yes, the problem it is not official, and we cant get new update.
Why we don't write a email to Canynogen and tell them that we open the bootloader and put CM. But we want they make CM for MX4 and MX5, with new CM and updates?
Sent from my MX5 using Tapatalk

my meizu is bricked, ne response please help me

hi someone had tested this app already? is it surely gonna work??
and after i will unlock the bootloader i can instal any rom? like Mokee and CM12.1??

Moto X pure Boot only recovery

Good Morning everybody,
so yesterday was a rough day and when it eventually end i recive the october security update on the phone, without thinking i installed it and the phone does not boot up , instead i face my recovery (TWRP 3.1.1-0).
Of course i've made a mess because i was on stock rooted 7.0 on my retEU XT1572 phone with unlocked bootloader and status 3
i've tryed to restore a previous nandroid backup wihtout success, so today i downloaded the new RESURRECTION REMIX v5.8.4 (4 december wich is based on stock android 7) but i have no luck even with that...
Do i miss something?is there any rom to try with now? or i have to make a downgrade of my firmware to make it work again?
thanks in advice!
UPDATE:
phone boot now but always in recovery and after rebooting in bootloader i can reboot system from there.. it seems that if you download an update and the install process doesen't go in place every time you restart the device it always try to re-flash it, that's why i'm always in recovery.. i foun a similar post with this solution but i think it need some changes before it will work on our device (but i don't have the knowledge to set it right :S )
LAST UPDATE:
boot fixed by using this command in twrp recovery
dd if=/dev/zero of=/dev/block/platform/f9824900.sdhci/by-name/misc
misc file running at the startup redirecting the boot in the recovery, put blank in the file let the system boot up normally

You missed very much.
Here is stock RetEu, before october update:
https://forum.xda-developers.com/moto-x-style/general/stock-xt-1572-reteu-7-0-ddumped-files-t3712521
Wipe all with twrp and flash all. After it you can get OTA's.
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
Here is RR 5.8.5 working on N modem:
https://forum.xda-developers.com/mo...ial-resurrection-remix-v5-8-3-t3637204/page40 post #397
Wipe all with twrp, update twrp to 3.2 and you can flash it right now.
@
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
@Husky34

oh thanx man! i've already seen that post but i wasn't sure that it can work for me. i have some question befor starting:
1) i need the new twrp 3.2 to flash resurrection-remix? because as i mention before i've already tried to flash it with twrp 3.1 and it doesen't work (the rom is the same that you linked page40 post #397 )
2) do i have to flash stock-xt-1572-reteu-7-0-ddumped-files before point 1)?
dzidexx said:
You missed very much.
Here is stock RetEu, before october update:
https://forum.xda-developers.com/moto-x-style/general/stock-xt-1572-reteu-7-0-ddumped-files-t3712521
Wipe all with twrp and flash all. After it you can get OTA's.
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
Here is RR 5.8.5 working on N modem:
https://forum.xda-developers.com/mo...ial-resurrection-remix-v5-8-3-t3637204/page40 post #397
Wipe all with twrp, update twrp to 3.2 and you can flash it right now.
@
---------- Post added at 11:03 AM ---------- Previous post was at 10:59 AM ----------
@Husky34
Click to expand...
Click to collapse

Husky34 said:
oh thanx man! i've already seen that post but i wasn't sure that it can work for me. i have some question befor starting:
1) i need the new twrp 3.2 to flash resurrection-remix? because as i mention before i've already tried to flash it with twrp 3.1 and it doesen't work
2) do i have to flash stock-xt-1572-reteu-7-0-ddumped-files before point 1)?
Click to expand...
Click to collapse
1. I think so. 3.2.x will be needed for future builds.
1a. You flashed RR for MM modem.
2. No, but this is only way to get ota update.

"swearing in italian" it was a twrp bug.. after a backup restore if you hit restart the phone restart in recovery, you need to boot into bootloader and reboot system from there -.-
thanks to all of you guys!!

strange fact, now if i turn off the phone and again on i'm still on recovery, i have to reboot bootloader and system from there.
i think something is pointing at the recovery instead system..
edit: it seems that if you download an update and the install process doesen't go in place every time you restart the device it always try to re-flash it, that's why i'm always in recovery.. i foun a similar post with this solution but i think it need some changes before it will work on our device (but i don't have the knowledge to set it right :S )

Ota update didn't end.
I think you can try clear data & cache otaupdate app and disable it. Link2sd can help with it. @Husky34

dzidexx said:
Ota update didn't end.
I think you can try clear data & cache otaupdate app and disable it. Link2sd can help with it. @Husky34
Click to expand...
Click to collapse
just tried but wihout luck.. maybe i can wait someone make the flashable update but i don't think this fix the issue

Flash uploaded stock.

dzidexx said:
Flash uploaded stock.
Click to expand...
Click to collapse
actually i fixed the issue using this command
dd if=/dev/zero of=/dev/block/platform/f9824900.sdhci/by-name/misc
misc file running at the startup redirecting the boot in the recovery, put blank in the file let the system boot up normally

Husky34 said:
actually i fixed the issue using this command
dd if=/dev/zero of=/dev/block/platform/f9824900.sdhci/by-name/misc
misc file running at the startup redirecting the boot in the recovery, put blank in the file let the system boot up normally
Click to expand...
Click to collapse
thanks, this command just saved me. but misc file in my XT1575 is under
/dev/block/platform/0/f9824900.sdhci/by-name/misc
but now I can't check system update in the OS anymore, I think flash back factory recovery mine help. Do you know where to download stock 7.0 recovery for 1575?
Edit: found it for 1575 here.

pshadoww said:
thanks, this command just saved me. but misc file in my XT1575 is under
/dev/block/platform/0/f9824900.sdhci/by-name/misc
but now I can't check system update in the OS anymore, I think flash back factory recovery mine help. Do you know where to download stock 7.0 recovery for 1575?
Edit: found it for 1575 here.
Click to expand...
Click to collapse
you can also use link2sd to disable the update app so it doesn't bother you,
or wait untill someone create a zip of the update and flash it into recovery.

thanks, that worked for me as well.
File was located at /dev/block/platform/soc.0/f9824900.sdhci/by-name/misc

rr 7.1.2 without gapps/ recovery mode not possible

Hello xda developers this is my second thread sorry for the first one that i made yesterday, I am having a problem with my lenovo k4 note a7010a48
after rooting successfully I proceed to flash rr 7.1.2 but did not flash the gapps now my problem is how to go back on recovery mode to start over again
I already used the power button followed by the volume up down buttons but it is not working like before it is nougat. I only need to get to recovery mode. Please help and thankyou in advance. More power

Does u have root access now and which version of rr u flashed

yes the phone is rooted already and flashed with rr 7.1.2 only need to open recovery mode which is I have no idea

Contact in telegram app 9032015333 I will tell u

i dont know that or how to do that can you teach me please thank you

I have the same issue. Can't enter into recovery and the phone is unable to start.

Same Issue || Don't Know How To Fix
Hi,
I am searching for a possible solution from a day. But could not find a working solution.
After successfully flashing RR-N-5.8.5 (Android N)
Unable to go into recovery.
PROBLEM DESCRIPTION:
1. When Press Vol Up + Vol Down + Power Up
2. Recovery is not loading up
3. Instead it goes in boot loop
4. Normal boot mode and fast boot mode are working perfectly fine
SOLUTIONS TRIED:
1. Flashing recovery again using fastboot mode
2. Flashing different recovery, i.e updated version of recovery
As all recoveries which were available were for marshmallow version. I am not sure but have doubt as android version is updated so the kernel so do recovery also become obsolete in this case ?
Any help is welcome and appreciated
Thanks
---------- Post added at 05:18 PM ---------- Previous post was at 05:12 PM ----------
jaineshjain said:
Contact in telegram app 9032015333 I will tell u
Click to expand...
Click to collapse
Whole concept of this platform is sharing your knowledge
Don't you think it would be better if you discuss here itself ?

jaineshjain said:
Contact in telegram app 9032015333 I will tell u
Click to expand...
Click to collapse
Whole concept of this platform is sharing your knowledge
Don't you think it would be better if you discuss here itself ?

for fastboot mode and for recovery mode yes i tried it also but thats the problem no recovery mode. I will wait for the solution when it comes i will just store my phone for a while.

Hi Developers,
Is it possible to reset the phone at hardware level? I can't even connect the phone to PC as it keeps on rebooting.
Please note: upgraded to Nougat and wanted to do the second recovery as suggested by mohancm in the post. When the phone rebooted (before flashing the second recovery), the problem started.
Please let me know if any one has a fix/workaround for the issue.
Thanks,
Srihari

1.Download TWRP recovery unzip files.
https://drive.google.com/file/d/0B1CKVcdcbHFPUzFCODVMN0ZfTW8/view
2.Now in folder TWRP\img\ there is the file recovery.img.
3.Download the second recovery for nougat recovery-Nougat.img and put in the TWRP\img folder.
https://androidfilehost.com/?fid=673368273298981920
4.Rename it as the original, recovery.img and replace it.
5.Then connect your phone to usb and select the 3th option from usb debugging message
"Transfer photos(ptp)"
6.run TWRP_Install.bat from TWRP folder
And you are done, had the same problem and I figure this solution, hope it will help.

I cannot locate the transfer photos(ptp)

ok I already done the part I am now on the recovery mode thanks. new problem of mine is after flashing the rom gapps and recovery after reboot it goes back to recovery mode did I miss something on flashing?

ok so i already passed this problem thanks for the help xda community thank you very much but I have this bootloop problem maybe I did a mistake flashing before rebooting sorry i am a noob in this kind of upgrade specially in mobile phones. I will be careful next time after I passed this problem I hope you will help me once again, my phone in bootloop is killing me.

I have same issue... I flashed gapps and my phone is working smoothly... The issue is i can't go into recovery mode... I tried some one tap reboot to recovery apps but all whats happening is phone restarting normally.

For those who can't access recovery mode. You were supposed to flash updated recovery image after flashing rrn rom.
Enter into fastboot mode by using adb shell.
Flash the updated recovery image
Now try rebooting into recovery.
Should work.
Worst case, restore by flashing stock rom using SP flash tools. And then start all over again.
If you face any issues ping me. Even I had faced this issue and fixed it after a lot of struggle. I can try to help you.

Or you could download Official Twrp App directly from play store, then find A3000 (Air Row) in 'select device' and flash that to recovery, (if your phone is rooted) then you are good to go, go to recovery mode and thats all, your twrp is now has been flashed.
Thank me later??

MisledMew said:
Enter into fastboot mode by using adb shell.
Flash the updated recovery image
Now try rebooting into recovery.
Click to expand...
Click to collapse
This really worked for me. Many thanks man.
Well it got me some time to find the right recovery image for my ROM so I decided to give you link for anyone going through the same.
My configuration at that time was: DotOS 1.2 and TWRP 3.1.1 (or so).
On the DotOS thread was enclosed link to wrong recovery image file (or its version was changed as of 28.12.2018) but after small investigation I found this file recovery-mohan-N.img.
Note: This recovery worked for TWRP and Android Nougat and I'm not an expert to suggest this will work for your case either.
Thank you again and have a nice time

firelmnt said:
This really worked for me. Many thanks man.
Well it got me some time to find the right recovery image for my ROM so I decided to give you link for anyone going through the same.
My configuration at that time was: DotOS 1.2 and TWRP 3.1.1 (or so).
On the DotOS thread was enclosed link to wrong recovery image file (or its version was changed as of 28.12.2018) but after small investigation I found this file recovery-mohan-N.img.
Note: This recovery worked for TWRP and Android Nougat and I'm not an expert to suggest this will work for your case either.
Thank you again and have a nice time
Click to expand...
Click to collapse
Glad it helped

[Recovery][MI 8 SE] TWRP Recovery Installer

Hi guys,
Easy way to flash TWRP from computer for Mi 8 SE.
Download suitable file from below.
Twrp 3.2.3-1227 Compatible with Android 9 (Beta v8.12.27 and upper versions)
https://www.mediafire.com/file/qtdm3qlivcn4gmw/MI8_SE_TWRP_Yukleme_Araci_81227.zip/file
Twrp 3.2.3-1102 Compatible with Android 8.1 (Lower versions than Beta v8.12.27)
https://www.mediafire.com/file/bsvuaxcg1vghayz/MI8SE_TWRP_Yukleme_Araci.zip/file
1. Your phone bootloader should be unlocked.
2. Make sure USB drivers are installed to PC.
3. Turn on USB Debugging. Settings - More - Developer Options - Usb debugging
4. Press Volume down + power button and reboot to fastboot mode.
5. Connect your USB cable to PC
6. Unzip downloaded package and run twrp-yukleme.bat file.
7. Press enter to continue. When it's done enter to exit program.
8-For steady TWRP install Magisk16.4 when you boot into TWRP.
Thanks to by.Trabzonlu from miuiturkiye

downloaded multiple times
unpacking gives a bug
I tried both links

olinen said:
downloaded multiple times
unpacking gives a bug
I tried both links
Click to expand...
Click to collapse
Thanks for your report.
Links and zips are updated. It should unzip fine now :good:

it's ok, just that I had to run the program first and only after that I joined the mobile in the fastboot. Otherwise, he made a mistake
Thx :good:

9
which TWRP u guys use to flash android 9 ? i always get bootloop
and most of the TWRP images here wont even boot for me

Alimataei said:
which TWRP u guys use to flash android 9 ? i always get bootloop
and most of the TWRP images here wont even boot for me
Click to expand...
Click to collapse
TWRP 3.2.3 12-17 works for android 9 ?

TacoNikky said:
TWRP 3.2.3 12-17 works for android 9 ?
Click to expand...
Click to collapse
1102 also works for Pie.

I try to install this recovery but nothing happens at all I have installed the rom miui.eu 10.2.2.0 apparently this rom mr deleted the recovery that had already installed before installing this rom:crying:

Have someone trying treble gsi rom? How to proper install? Thanks in advance.

TWRP-3.3.0-0423 whit magisk 19.0 root For Xiaomi mi8 SE
Download Link:
https://mega.nz/#!CrhTmKgY!PE7lXdLtCzPqYO55ulCx2faFLVqPi6mpXXaYOnbbB8s

Could it be possible that this TWRP will work on mi 9 se, too?
Sent from my [device_name] using XDA-Developers Legacy app

putti71 said:
Could it be possible that this TWRP will work on mi 9 se, too?
Click to expand...
Click to collapse
This is mi8se forum!! TWRP is specific for each phone (different kernel, processor...) so there's no way you could install this TWRP img on another phone than Sirius

Getting this error: FAILED (remote: Failed to load/authenticate boot image: Load Error)
Seems to install correctly but doesn't boot into it. Holding power on and volume up boots it back into fast boot. Any ideas?

Hi! Is there an updated twrp for miui 11 android 10. First time to install this.

greendra8 said:
Getting this error: FAILED (remote: Failed to load/authenticate boot image: Load Error)
Seems to install correctly but doesn't boot into it. Holding power on and volume up boots it back into fast boot. Any ideas?
Click to expand...
Click to collapse
Same as mine. How's your device now?
---------- Post added at 08:16 AM ---------- Previous post was at 08:13 AM ----------
Hi guys. Im getting the error after flashing twrp. At first it works. I will flash rom so i reset it and wipe al data. But it didn't boot into recovery mode. It stays at fastboot. I just dl this installer from somewhere here in xda so i didint know thatmagisk should be flashed afterward. Pls help. I . getting error authentication failed

Trojan00 said:
Same as mine. How's your device now?
Click to expand...
Click to collapse
This was a long time ago now and I've since changed device. However, I seem to remember having to switch back to the original Chinese ROM and starting again. It allowed me to install the correct version of TWRP I think. But if you do go back, make sure you don't lock your device again like I did. I think there's a checkbox on the program that you have to use to put the Chinese ROM back on and you need to make sure it's ticked. Sorry if I'm not of much help but it was so long ago now that it's hard for me to remember.

greendra8 said:
This was a long time ago now and I've since changed device. However, I seem to remember having to switch back to the original Chinese ROM and starting again. It allowed me to install the correct version of TWRP I think. But if you do go back, make sure you don't lock your device again like I did. I think there's a checkbox on the program that you have to use to put the Chinese ROM back on and you need to make sure it's ticked. Sorry if I'm not of much help but it was so long ago now that it's hard for me to remember.
Click to expand...
Click to collapse
My fault is I didn't flash the magisk. I saw this link somewhere here in xda so I didn't know that magisk should be flashed. What twrp did you install?

Trojan00 said:
My fault is I didn't flash the magisk. I saw this link somewhere here in xda so I didn't know that magisk should be flashed. What twrp did you install?
Click to expand...
Click to collapse
These were the notes that I left myself:
After boot, go into Fastboot and flash recovery 3.2.3-1217 twrp
Using this, wipe everything apart from bottom box on advanced wipe. Do twice, reboot once in the middle.
Flash EU rom. Do the wipe it promts after install and boot up.
Then use fastboot to flash recovery TWRP-EU, and flash magisk (canary build) to keep twrp installed.
I'm not sure what version this TWRP-EU is, so I've just uploaded it to Google Drive for you here.
Hope this helps.

greendra8 said:
These were the notes that I left myself:
After boot, go into Fastboot and flash recovery 3.2.3-1217 twrp
Using this, wipe everything apart from bottom box on advanced wipe. Do twice, reboot once in the middle.
Flash EU rom. Do the wipe it promts after install and boot up.
Then use fastboot to flash recovery TWRP-EU, and flash magisk (canary build) to keep twrp installed.
I'm not sure what version this TWRP-EU is, so I've just uploaded it to Google Drive for you here.
Hope this helps.
Click to expand...
Click to collapse
Bro i downloaded the stock fastboot firmware. But in mi flash it says can not found file flash_all.bat