Database Users

Help me please

So I've been messing around with android phones for a while now and I'm stuck. I was on the oxygen 2.1.6 Rom then decided to make a back up. However instead of going into CWR it just went into fast boot. When I go into recovery it just says fast boot mode no reboot or recovery img. I tried to odin back to stock like I usually do but adb wont recognize my device like it usually does. Please don't tell me I'm bricked and that I messed up bad. Any help would be appreciated. Thanks in advance.
I tried reinstalling drivers etc etc. Somebody help me lol

futuralabs87 said:
So I've been messing around with android phones for a while now and I'm stuck. I was on the oxygen 2.1.6 Rom then decided to make a back up. However instead of going into CWR it just went into fast boot. When I go into recovery it just says fast boot mode no reboot or recovery img. I tried to odin back to stock like I usually do but adb wont recognize my device like it usually does. Please don't tell me I'm bricked and that I messed up bad. Any help would be appreciated. Thanks in advance.
I tried reinstalling drivers etc etc. Somebody help me lol
Click to expand...
Click to collapse
It sounds like you flashed a bad recovery. Download a new recovery , boot into fastboot, and
Code:
fastboot flash recovery yourrecoveryfile.img

adb wont recognize my device so how do I flash a new recovery

futuralabs87 said:
adb wont recognize my device so how do I flash a new recovery
Click to expand...
Click to collapse
Adb only works when the phone is booted normally, provided usb debugging is on.
Use fastboot. If you want to make sure it's working, boot into fastboot mode and
Code:
fastboot devices
If it's working, you will see your serial number.

If the other options can't help you get your problem solved try Odin.
www.samfirmware.com
get the right files for your device and Odin program itself. There are tutorials on here how to use it.

sorry I was being an idiot. I tried fastboot and it showed nothing connected. When I flashed a recovery it just hung waiting for device. I have all the drivers loaded on the computer but my device is still unknown and wont be recognized. I have all the odin files and I have used odin before. This sucks

btw appreciate the help guys

futuralabs87 said:
btw appreciate the help guys
Click to expand...
Click to collapse
Try installing pdanet, that will install all the drivers you need for fastboot and Odin.
Sent from my Nexus S using XDA Premium App

Have you tried to run shabbys 1 click root to get the recovery in place? Assuming your on sprint that is
Sent from my Nexus S 4G using Tapatalk

dreamsforgotten said:
Have you tried to run shabbys 1 click root to get the recovery in place? Assuming your on sprint that is
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
my one click works on both versions, as all it does it just gets you root. if you want cwm then use rom manager afterwards.
but for his problem no it relies on adb and fastboot

shabbypenguin said:
my one click works on both versions, as all it does it just gets you root. if you want cwm then use rom manager afterwards.
but for his problem no it relies on adb and fastboot
Click to expand...
Click to collapse
Sorry I didn't say anything, it was a burp
Sent from my Nexus S 4G using Tapatalk

shabbypenguin said:
my one click works on both versions, as all it does it just gets you root. if you want cwm then use rom manager afterwards.
but for his problem no it relies on adb and fastboot
Click to expand...
Click to collapse
Maybe not, but it does include some handy files. ;-)
Download and unzip Shabby's OneClickRoot
Install pdanet. (See the readme for which one.)
Reboot your computer.
Then try using his version of fastboot.
I'm assuming you are in fastboot mode (it will say so) and that you're using the usb cable that came with the phone.

I will give it a go now I do have PDA installed too

No luck boys just bought a sensation but still wanna fix my nexus s
Sent from my HTC Sensation 4G using XDA Premium App

Nexus 7 stuck on GOOGLE booting screen

Hey so yesterday I mucked around with the mounting/unmounting/formatting stuff in fastboot. Now it's not booting up, it's stuck at the GOOGLE logo. I left it on overnight, and it's still stuck there. I can still turn off the device and enter fastboot mode. Anyone know what's wrong?
Thanks

How do you want to know what's happening to your device if don't tell us which commands you have done exactly with fastboot and why ?

Nico_60 said:
How do you want to know what's happening to your device if don't tell us which commands you have done exactly with fastboot and why ?
Click to expand...
Click to collapse
Sorry
I went to the fastboot menu and unmounted everything, and formatted everything. Then I deleted all user data and the cache partition. I'm running xenon HD rom.
Thanks

You were running xenon rom before you formatted everything! Now if you want to stay with xenon you have to push the rom in your device using adb and install it with recovery.

Nico_60 said:
You were running xenon rom before you formatted everything! Now if you want to stay with xenon you have to push the rom in your device using adb and install it with recovery.
Click to expand...
Click to collapse
I could care less about the rom. I just want to turn on the device...
It could be stock, I'll just root it again.
I'm kind of a beginner with this, how exactly do I push the rom
Anyways, thanks

nicetaco said:
I could care less about the rom. I just want to turn on the device...
It could be stock, I'll just root it again.
I'm kind of a beginner with this, how exactly do I push the rom
Anyways, thanks
Click to expand...
Click to collapse
I can't push it because it's not being recognized on my computer
Anyone help please?

92 views an only 1 person helping..

I would say to get Wug's tool kit and use that to unbrick/flash back to stock. To get your computer to recognize the tablet you likely need to install the proper drivers, which are included with the toolkit and instructions on installing them.
Edit: link http://forum.xda-developers.com/showthread.php?t=1766475
Sent from my LG-P999 using xda premium

Волк said:
I would say to get Wug's tool kit and use that to unbrick/flash back to stock. To get your computer to recognize the tablet you likely need to install the proper drivers, which are included with the toolkit and instructions on installing them.
Edit: link http://forum.xda-developers.com/showthread.php?t=1766475
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
The problem is, I don't have USB debugging on, so it's impossible to install the drivers.

Go in bootloader/fastboot mode and then type "fastboot devices" to see if your device is recognized

Nico_60 said:
Go in bootloader/fastboot mode and then type "fastboot devices" to see if your device is recognized
Click to expand...
Click to collapse
Sorry if I sound stupid, but I don't think I can type in bootloader mode...

Nico_60 said:
Go in bootloader/fastboot mode and then type "fastboot devices" to see if your device is recognized
Click to expand...
Click to collapse
This may sound stupid, but I cant type in bootloader mode

You did already use fastboot commands no?

Nico_60 said:
You did already use fastboot commands no?
Click to expand...
Click to collapse
No, I didn't...

nicetaco said:
No, I didn't...
Click to expand...
Click to collapse
Please help I think I'm going crazy o.0

nicetaco said:
Please help I think I'm going crazy o.0
Click to expand...
Click to collapse
OK never mind I fixed it. I just installed the ROM through a USB from a OTG cable. Thanks a lot for your help though!
-Kevin
Enjoy my thanks

same case with me...
my nexus 7 3g now stuck on google screen

buncit8 said:
same case with me...
my nexus 7 3g now stuck on google screen
Click to expand...
Click to collapse
what did you do before it was stuck at the Google logo?

Nico_60 said:
what did you do before it was stuck at the Google logo?
Click to expand...
Click to collapse
i want to install xenonHD rom but failed with error bla bla bla... (status 7).
so i try to wipe data, wipe cache, wipe dalvik cache, and format system
when i do reboot, it stuck on google logo
really need help,

Did you reflash the ROM and gapps after doing the wipes? Otherwise, try: factory reset, format system, flash ROM, flash gapps, reboot.

Bricked after OTA..

My sprint LG G2 was boot looping into TWRT after I accepted an OTA.
I've read several posts, http://forum.xda-developers.com/showthread.php?t=2477595 and this one http://forum.xda-developers.com/showthread.php?t=2448960,
the problem I get is I can not get into download mode, well, I did enter it, but it stuck at 0%, and my computer don't recognize it. Can not find the phone in "devices", installed the driver and still no avail. BTW, when I boot into TWRT, my computer can recognize the android device and ADB works then.
Since I cannot get past the download mode, I can not use the LG flash tool.. it says "LG USB/Parallel lock key is not detected".
Any suggestion is deeply appreciated.

Try this http://forum.xda-developers.com/showthread.php?t=2451696
[FIX] Installed TWRP and now you're stuck after OTA?
Sent from my LG-G2 using XDA Premium 4 mobile app

prking07 said:
Try this http://forum.xda-developers.com/showthread.php?t=2451696
[FIX] Installed TWRP and now you're stuck after OTA?
Sent from my LG-G2 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried, use ADB while the phone is in TWRT, went through and restarted, still boot into TWRT.
The command line in TWRT will pop up an error message saying "not enough space", although I do have enough space. So it didn't work either.

Sounds like you just need to keep messing with it until you can get it to recognize it in download mode and go back to stock. What Windows version do you have? i had some issues with 8 but 7 worked fine.

thenewak said:
Sounds like you just need to keep messing with it until you can get it to recognize it in download mode and go back to stock. What Windows version do you have? i had some issues with 8 but 7 worked fine.
Click to expand...
Click to collapse
I have Windows 7 64bit with all the latest patches.

Utahnewbie said:
I tried, use ADB while the phone is in TWRT, went through and restarted, still boot into TWRT.
The command line in TWRT will pop up an error message saying "not enough space", although I do have enough space. So it didn't work either.
Click to expand...
Click to collapse
Well, that Fix clear FOTA with zeros and it should end with "not enough space", this is normal.
I guess when your phone restarted into download mode and got stuck on 0%, it already overwrite maybe part of system partition, this is why only download or recovery works.
Did you made any nandroid backup before? If yes, restore at least boot & system from it. It should help, so you can boot normally. If you do not have any backup, well, maybe some other fellow Spring user can give u his boot & system backup files so you can restore them.

p.valenta said:
Well, that Fix clear FOTA with zeros and it should end with "not enough space", this is normal.
I guess when your phone restarted into download mode and got stuck on 0%, it already overwrite maybe part of system partition, this is why only download or recovery works.
Did you made any nandroid backup before? If yes, restore at least boot & system from it. It should help, so you can boot normally. If you do not have any backup, well, maybe some other fellow Spring user can give u his boot & system backup files so you can restore them.
Click to expand...
Click to collapse
Yes, I have a full nandroid backup before. I did a full restore from it after the boot-looping, but it didn't work, I still boot into TWRP and unable to boot into system.

Utahnewbie said:
Yes, I have a full nandroid backup before. I did a full restore from it after the boot-looping, but it didn't work, I still boot into TWRP and unable to boot into system.
Click to expand...
Click to collapse
so you followed that fix to clear FOTA, restored from backup, but when do "REBOOT SYTEM" from TWRP it ends again in recovery?
hmmm, how about these steps:
http://forum.xda-developers.com/showthread.php?t=2432476
using Flash Tool to restore stock ROM.

p.valenta said:
so you followed that fix to clear FOTA, restored from backup, but when do "REBOOT SYTEM" from TWRP it ends again in recovery?
hmmm, how about these steps:
http://forum.xda-developers.com/showthread.php?t=2432476
using Flash Tool to restore stock ROM.
Click to expand...
Click to collapse
No, it doesn't work, because my phone stuck at 0% in download mode and it doesn't show up in my device manager on PC.

I had the same problem
Utahnewbie said:
No, it doesn't work, because my phone stuck at 0% in download mode and it doesn't show up in my device manager on PC.
Click to expand...
Click to collapse
I used the fix from http://forum.xda-developers.com/showthread.php?t=2448960
except that I used the sprint .tot file. (http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Sprint+LS980/)
Did you try to reinstall the drivers or use a different cable?

I encountered the same issue last night. I reinstalled the Verizon united drivers and rebooted my machine. The next time that I connected the device in download mode, device manager picked up the device. I had to re-run the LG tool, but it eventually progressed past 0% and my issue was fixed. You can reinstall the verizon drivers using the following link.
http://wacomalt.com/dropbox/LGG2/StockRevert/LG VZW_United_WHQL_v2.11.1.exe

I'm having the same issues with D802b after doing the 60mb OTA update. My phone didn't get a chance to actually do the download as on first restart it just went straight into TWRP and I haven't been able to get back since.
It's just looping back into TWRP each time. I've now completely wiped all parts of the phone including the internal SD card, I've even re-installed a new kernel and rom (The custom one I was using before this happened, from http://forum.xda-developers.com/showthread.php?t=2505682) from an attached USB (sd card reader) with successful installs through TWRP (including wiping cache etc), still reboots into TWRP on restart. I've also done a hard reset that was supposedly successful, still boots into TWRP.
Same as the OP, it won't 'install itself' properly in windows while in TWRP mode or in 'Software Download' mode (turn on with up and down buttons pressed down and plug data cable in). I've tried in vain to hunt down a specific D802 inf as pointing it at the universal driver didn't detect either.
I have installed the Android SDK, LG Suite, LG Universal drivers. I've then tried the B2CAppSetup (which works, but won't detect the device). I've then tried the FlashTool 1.0.54 and it gets all the way through but can't communicate with the device.
The only thing I haven't managed to do yet is to decompress the official kdz into a zip so I can flash it through TWRP. Haven't had much luck with LGExtract as of yet.
Rather baffled actually, as I'm sure the OP is.
Any thoughts?
---------- Post added at 08:55 PM ---------- Previous post was at 08:11 PM ----------
Having just posted all that above, I look further down the forum and someone linked to this thread below.
Fixed my issue, so I imagine it will sort yours out too.
http://forum.xda-developers.com/showthread.php?t=2451696

Update: I don't want to deal with this issue anymore.. just replaced it and got a new one

Utahnewbie said:
Update: I don't want to deal with this issue anymore.. just replaced it and got a new one
Click to expand...
Click to collapse
That is excellent, did they give you a hard time replacing it?

thenewak said:
That is excellent, did they give you a hard time replacing it?
Click to expand...
Click to collapse
No, because I microwaved it.

prking07 said:
Try this http://forum.xda-developers.com/showthread.php?t=2451696
[FIX] Installed TWRP and now you're stuck after OTA?
Sent from my LG-G2 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried that method many times and it does not work on the Sprint version. If you read through the thread you'll noticed that others with Sprint devices can not get that method to work.
The only method that worked for me was to use the LG Flash tool and flash the Sprint tot file and follow the instructions for the Verizion method for going back to stock.
---------- Post added at 01:41 AM ---------- Previous post was at 01:22 AM ----------
Utahnewbie said:
My sprint LG G2 was boot looping into TWRT after I accepted an OTA.
I've read several posts, http://forum.xda-developers.com/showthread.php?t=2477595 and this one http://forum.xda-developers.com/showthread.php?t=2448960,
the problem I get is I can not get into download mode, well, I did enter it, but it stuck at 0%, and my computer don't recognize it. Can not find the phone in "devices", installed the driver and still no avail. BTW, when I boot into TWRT, my computer can recognize the android device and ADB works then.
Since I cannot get past the download mode, I can not use the LG flash tool.. it says "LG USB/Parallel lock key is not detected".
Any suggestion is deeply appreciated.
Click to expand...
Click to collapse
Not really sure if this would've solve your problem but here's my possible theory to why you couldn't get it to work:
I was in the same situation. Took the OTA update and was boot looping into TWRP. Just like you, nothing in TWRP would fix it. I think you probably panicked and rush through the instructions and forgot some important steps. Make sure you did not install the Verizon driver by accident because that will cause problems with your Sprint phone not being properly detected by your computer. I did panicked and started to try to many things and somehow got a copy of the Verizon driver and installed it. ADB was able to see my phone but when I tried to sideload something through TWRP it would generate an error. I found out that I had both drivers(LG USB driver and the Verizon USB driver) installed and after removing the Verizon USB driver my computer was able to detect my phone properly. It's really important that after making any changes or installations of drivers you will need to reboot your PC to get the new changes to take effect.
You got the "LG USB/Parallel lock key is not detected" error is because you forgot to copy and overwrite the "MegaLock.dll" that's located at "C:\LG\LGFlashTool" directory.
To get into download mode you just need to press the +volume button only(do not hold or press the power button) and plug in the USB cable that's attached to your computer and Download Mode should come on. It will stay on 0% until the LG Flash tool flashes the Sprint stock rom onto the phone.
Once I got the phone to come up in Download Mode I had to go into Device Manager and find the device and then change the COM port to COM 41 then everything went smoothly as the instruction indicated. If you were not able to change the COM to COM 41 then it will never work.
If you're not sure that you have all the files then this is where I got mine from:
http://forum.xda-developers.com/showthread.php?t=2486738&page=7
or
http://forum.xda-developers.com/showpost.php?p=47849315&postcount=9
After I got the file above I followed the directions for the Verizon method below:
http://forum.xda-developers.com/showthread.php?t=2448960

Utahnewbie said:
No, because I microwaved it.
Click to expand...
Click to collapse
How long for? Thanks,
Sent from my Nexus 7 using Tapatalk

RedMist said:
How long for? Thanks,
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
four seconds

Utahnewbie said:
four seconds
Click to expand...
Click to collapse
That was enough to stop it booting? Cheers,
Sent from my Nexus 7 using Tapatalk

LG smartcover has stopped

Hello,
So, my vs98039a is having a pop up saying "Unfortunately, LG smartcover has stopped". When i close it, it automatically keeps popping up, over and over and over. I am rooted with stock rom. I have twrp recovery.
I tried to install xposed through twrp. That is when it started with the pop ups. I read that xposed is making the pop ups happen.
I tried to do a recovery, but the recovery wasnt found on memory stick via usb.
So, i was able to do a factory reset, but still have these stupif pop ups. The factory reset took it back to 5.0.2.
I really need some help bad. How do I get rid of these pop ups??? I am sick over this.
Thank you very much

jimecv88 said:
Hello,
So, my vs98039a is having a pop up saying "Unfortunately, LG smartcover has stopped". When i close it, it automatically keeps popping up, over and over and over. I am rooted with stock rom. I have twrp recovery.
I tried to install xposed through twrp. That is when it started with the pop ups. I read that xposed is making the pop ups happen.
I tried to do a recovery, but the recovery wasnt found on memory stick via usb.
So, i was able to do a factory reset, but still have these stupif pop ups. The factory reset took it back to 5.0.2.
I really need some help bad. How do I get rid of these pop ups??? I am sick over this.
Thank you very much
Click to expand...
Click to collapse
Hopefully this will teach you to read before messing around. In the Q&A, there's a link how to get it working thru adb. http://forum.xda-developers.com/showthread.php?p=58829021
If you can't get it working that way then you'll need to return to stock. (post# 2) http://forum.xda-developers.com/showthread.php?p=51318377
It's been a known issue since Xposed in alpha (not for everyone) has been out.
http://forum.xda-developers.com/showthread.php?p=59382546
Sent from my VS98039a using XDA Free mobile app

z3pp3lin said:
Hopefully this will teach you to read before messing around. In the Q&A, there's a link how to get it working thru adb. http://forum.xda-developers.com/showthread.php?p=58829021
If you can't get it working that way then you'll need to return to stock. (post# 2) http://forum.xda-developers.com/showthread.php?p=51318377
It's been a known issue since Xposed in alpha (not for everyone) has been out.
http://forum.xda-developers.com/showthread.php?p=59382546
Sent from my VS98039a using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your help, nothing is working. I cant seem to get the sdk tools to work so that I can open adb cmd. I downloaded the sdk suite and manager. I'm afraid its a lost cause . I try to go back to stock, and the phone will not stay connected when flashing vs98039a firmware. I even went to Lg site and downloaded the newest driver. It works, phone tries to reboot and shuts off and flashtool says there was error when it tries to install firmware. I try to get phone in dowload mode, and it says download mode but there is an error message top left. Then it shut off completely.
How the heck can I get adb to open up so I can enter commands to stop smartcover, weather,and weather platform??? I have done all of this on my razr m without a hitch. Im not a noob. I do not understand this G2!!!

jimecv88 said:
Thanks for your help, nothing is working. I cant seem to get the sdk tools to work so that I can open adb cmd. I downloaded the sdk suite and manager. I'm afraid its a lost cause . I try to go back to stock, and the phone will not stay connected when flashing vs98039a firmware. I even went to Lg site and downloaded the newest driver. It works, phone tries to reboot and shuts off and flashtool says there was error when it tries to install firmware. I try to get phone in dowload mode, and it says download mode but there is an error message top left. Then it shut off completely.
How the heck can I get adb to open up so I can enter commands to stop smartcover, weather,and weather platform??? I have done all of this on my razr m without a hitch. Im not a noob. I do not understand this G2!!!
Click to expand...
Click to collapse
You need to remove these 3 apps for xposed to work:
LGCover, LGWeather, LGWeatherService
Just flash the attached file through recovery and xposed will work.

Sent from my XT907 using XDA Free mobile app
I was wondering how that is even possible since I did a factory reset, the popups will not let me past them, and I have no recovery as far as I know.? The usb debugging is on, and the phone shows it is connected, but pc does not see it. Unknown sources is enabled as well.
I can't flash anything from pc using the lg flash tool. It gets to 50 percent and says device isn't connected. Can't even try the freedom tool anymore if it went connect. I have the latest usb driver.
I don't evenknow if I have root anymore. Popups won't let me do anything.

So anyway, I ended up just wiping everything thru the twrp recovery and took the firmware zip I downloaded (vs98039a) and installed it. Everything is back to normal with fresh stock rom. I think I will just be happy with that, until xposed has a clean apk. Thank you for your help
Sent from my VS980 4G using XDA Free mobile app

ar31an said:
You need to remove these 3 apps for xposed to work:
LGCover, LGWeather, LGWeatherService
Just flash the attached file through recovery and xposed will work.
Click to expand...
Click to collapse
Exactly, that´s the problem.
If you can´t solve it with that, flash new rom, and do that before install xposed again,

One more thing, can I use titanium to freeze these apps or should I just delete them?
Sent from my VS980 4G using XDA Free mobile app

jimecv88 said:
One more thing, can I use titanium to freeze these apps or should I just delete them?
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
yes you can freeze them too, it will most likely work too.

Loss of Vendor

Hi
Hope someone can help. I was running MIUI 9 (Android 7) and unlocked the phone and then installed TWRP 3.2.1.0 when I rebooted the phone stuck on the MI screen with the unlocked indicator at the bottom. I went back into TWRP and found that the OS had disappeared. I then downloaded MIUI 9 GLOBAL zip and I could not transfer it to the phone (kept saying it was not connected) although I was able to access the internal SD on my Laptop. I then downloaded MiNote2 Global V8.2.3.0 MADMIDL and was able to send it to the phone and install it but during the install I got (Vendor not mounted, invalid argument). Can anyone advise how I can get my MI Note 2 up and running again?
TIA
Sent from my Nokia 7 plus using Tapatalk

Bump
Sent from my VS995 using Tapatalk

Sorry to respond to you this late , i'm not using XDA that often nowadays...
You may want to try restoring all back to normal with Mi Flash Tool...
Download the fastboot ROM and flash it. Be careful to not be selected the clean all+ lock option on the bottom left.

alexmanu1 said:
Sorry to respond to you this late , i'm not using XDA that often nowadays...
You may want to try restoring all back to normal with Mi Flash Tool...
Download the fastboot ROM and flash it. Be careful to not be selected the clean all+ lock option on the bottom left.
Click to expand...
Click to collapse
Thanks for the reply but I am having trouble trying to install using Mi Flash Tool. It keeps erroring telling me it cannot find flash-all.bat. Is there any way to overcome this?

Stransky said:
Thanks for the reply but I am having trouble trying to install using Mi Flash Tool. It keeps erroring telling me it cannot find flash-all.bat. Is there any way to overcome this?
Click to expand...
Click to collapse
The simple steps are:
To make sure the drivers are ok, install "Minimal fast oot and adb drivers"
Unpack the fastboot rom, open MiFlash and select the folder that has been unpacked (it normally has the same name as the zip)
Press Refresh in MiFlash if your device does not appear in the list (you need to have it plugged in and in fastboot mode at this point)
When your device is seen, and it will be if you have the drivers fine, click on Flash.
Hope this helps
The phone will reboot when the flash is done

Hi
Thanks for your reply. Did all as you have indicated but still get error (not found flash_all.bat) when I start the flash process in.MiFlash tool.
Sent from my Nokia 7 plus using Tapatalk

Stransky said:
Hi
Thanks for your reply. Did all as you have indicated but still get error (not found flash_all.bat) when I start the flash process in.MiFlash tool.
Sent from my Nokia 7 plus using Tapatalk
Click to expand...
Click to collapse
Seems like you are having a bad fastboot ROM...
Here is the link for 9.5.4.0 Global Stable.

alexmanu1 said:
Seems like you are having a bad fastboot ROM...
Here is the link for 9.5.4.0 Global Stable.
Click to expand...
Click to collapse
Thank you very much for taking the time to assist me. My MiNote 2 is now back up and running.
As you said the Roms that I had downloaded previously must have been corrupted or incomplete.
Again many thanks.

Stransky said:
Thank you very much for taking the time to assist me. My MiNote 2 is now back up and running.
As you said the Roms that I had downloaded previously must have been corrupted or incomplete.
Again many thanks.
Click to expand...
Click to collapse
No problem bro!
If you are not in the Mi Note 2 Telegram Group, here it is.
Everytime you need to restore your phone, you can do it like this, there is no problem.
Glad you restored your phone into a working state!