A2017U Capacitive button question - ZTE Axon 7 Questions & Answers

I was a victim of not reading fully a post and I flashed (attached) what I was thinking would change the order of the capacitive buttons to App Switch App, Home, Back
But when I rebooted my capacitive buttons were App Switch, Home and the right button was disabled.
I was wondering if something in the synaptics_dsx.kl got screwed up and disabled the right capacitive button.
Any help would be greatly appreciated
Also, could someone compare the synaptics_dsx.kl in my attachment with theirs and let me know if there is any difference

Related

Home button not responsive

Has anyone noticed that the black home button (located at the bottom edge of the screen, 2nd from the left) isn't as responsive as the other 3? I have Haptic feedback enabled and when I spam the button at the home screen, it doesn't vibrate as much as the other 3.
this has been posted previous times already did you even search? you need to take your phone back and get a new one its defective lots of people are having that problem
Nope, didn't think that it was a prevailing problem. Thanks for the info tho. Will be at the store tomorrow.

Menu and back button.

I just bought a used hd2 yesterday, and it came with magldr with ultimate droid rom 3.3. I found out that none of the physical button acts as a Menu and Back button which makes navigation and menu access very hard. I even changed roms but still same thingn
My question is, is hd2 don't map physical keys as menu and back? Or is my unit actually defective? All the buttons work though, only that the Window and Home button does the same thing while Back and End button turns off the screen.
Thanks in advance!
Update: I have manage to get the menu (window) button working, but the back button is more trickier.. it seems thatt the physical button is actually pressing other keys.. in this case when I pressed the Window button for menu.. it will actually press the Home button which will bring me back to home screen. And for the back button, its actually pressing the End button, although I did manage to get it to press its back button, but its quite difficult. Does anyone knows how to fix this?
reply back button
I think that u may have a faulty back button or that dirt got under it thefe are guides on here xda that show u how to fix back button etc but it requires you taking phone apart and you need to read guides totally and follow steps there are also guides on youtube as well. It also sounds that the buttons might have been remapped there is an app called button remapper that allows you to change what the physical buttons do like the phone button back button etc do in other words you can change what every physical button on your hd2 does like for example the volume keys you would be able to change to back button etc. Read about button remapper on google before attempting to use app hope this helps you.
That's a common issue in the HD2, probably your device is defective.
Don't bother with the warranty, replacement and all that stuff since the back and menu aren't required for flashing or entering bootloader mode.
Just download "zMooth" app from market. (Pro version will give you End & Search)
I would prefer fixing the physical keys as they are important functions that is required in order to navigate around. Any links to how to fix the buttons? I think they are just misaligned because of prolong usage. Because multiple tries proves that it can still work.
Update: I have seen the official tutorial video for disassmbling the HD2, to just replace the keypad flex ribbon requires one to go very deep inside the phone before you can actually access the flex ribbon for the keypad. Now i am thinking twice to repair the physical button, let alone give an unofficial service guy to replace it.
@Marvlesz
I have installed zMooth, nice app.. but take some time getting used to. thanks!
or you can try a cm7 rom and use the tablet tweak soft keys in the options.
u can use button savior to replace all buttons .. it's a must have for me ..
Does anyone know if physical button problem such as mine are caused by the wear and tear of the flex cable or is it because of the plastic buttons itself?

[Q] Touchscreen not working on lock and reset screens

In the last couple of weeks, when the pattern lock screen is displayed, it intermittently doesn't accept touch input. If I power off and on the screen quickly, it then accepts touch input fine.
Similarly, if I press and hold the power button (with the phone on), it brings up a "Phone Options" screen, with options for Silent, Airplane, Profile, Reboot and Power Off. Touch input does not work at all on this screen. I'm working around this by using the Quick Boot app.
Otherwise, touch input works fine, so I don't think it's a hardware problem.
I've seen something similar when Google Nav gets in front of the lock screen. Touch doesn't work until I power off and on the screen, and enter the lock pattern. Could something invisible be getting in front of the lock and power screens?
Using Pongster's HyperDroid-GBX-v12 (2.3.3).
Hey there,
Maybe the ROM h doesnt function properly on your device. Try shifting to another rom. All are equally amazing. If you do not want to shift, try running task29 and start the process all over again
SheenaIsAPunkRocker said:
In the last couple of weeks, when the pattern lock screen is displayed, it intermittently doesn't accept touch input. If I power off and on the screen quickly, it then accepts touch input fine.
Similarly, if I press and hold the power button (with the phone on), it brings up a "Phone Options" screen, with options for Silent, Airplane, Profile, Reboot and Power Off. Touch input does not work at all on this screen. I'm working around this by using the Quick Boot app.
Otherwise, touch input works fine, so I don't think it's a hardware problem.
I've seen something similar when Google Nav gets in front of the lock screen. Touch doesn't work until I power off and on the screen, and enter the lock pattern. Could something invisible be getting in front of the lock and power screens?
Using Pongster's HyperDroid-GBX-v12 (2.3.3).
Click to expand...
Click to collapse
Have you read the thread about the unresponsive touchscreen, where pressing hard on the end call button fixes the screen touch? I assume your problem is in essence the same; once you press it hard enough to actually unlock the screen the touch works fine.
Nigeldg said:
Have you read the thread about the unresponsive touchscreen, where pressing hard on the end call button fixes the screen touch? I assume your problem is in essence the same; once you press it hard enough to actually unlock the screen the touch works fine.
Click to expand...
Click to collapse
That probably is what the problem is. Btw to everyone, I haven't noticed a difference in pressing it really hard, I noticed that pressing it a lot of times does the trick
Sent from my HTC HD2 using Tapatalk
Thanks for the feedback. I don't think it's the ROM, been using GBX-v12 since it was released, and previous versions before that.
The symptoms do seem similar to the other thread, but others report it on many screens. I only get it on the lock and reset/power screen. Otherwise, it works fine. However, those screen are brought up after pressing the power key ...
I suppose if it is hardware, then it's likely that cable issue. If it's software, then a reset should clear it, so I might try an ICS ROM from scratch first.
SheenaIsAPunkRocker said:
Thanks for the feedback. I don't think it's the ROM, been using GBX-v12 since it was released, and previous versions before that.
The symptoms do seem similar to the other thread, but others report it on many screens. I only get it on the lock and reset/power screen. Otherwise, it works fine. However, those screen are brought up after pressing the power key ...
I suppose if it is hardware, then it's likely that cable issue. If it's software, then a reset should clear it, so I might try an ICS ROM from scratch first.
Click to expand...
Click to collapse
I guess i shoulda commented that how my digitizer began acting, it only did it while in the power menu but after a couple days it started doing it while just hitting the power button to put it to sleep, so i remapped my green phone key to be the power button
elesbb said:
I guess i shoulda commented that how my digitizer began acting, it only did it while in the power menu but after a couple days it started doing it while just hitting the power button to put it to sleep, so i remapped my green phone key to be the power button
Click to expand...
Click to collapse
Thanks for the tip. You're right about the symptoms getting worse, it now occasionally stops working on other screen
I'm using any button but power to turn on the phone. To turn it off I've added "Go to sleep" to the notification widget bar, which I assume is the same as pressing power??
Not quite as user friendly and sometimes I forget not to use power off, but it'll do for now!
SheenaIsAPunkRocker said:
Thanks for the tip. You're right about the symptoms getting worse, it now occasionally stops working on other screen
I'm using any button but power to turn on the phone. To turn it off I've added "Go to sleep" to the notification widget bar, which I assume is the same as pressing power??
Not quite as user friendly and sometimes I forget not to use power off, but it'll do for now!
Click to expand...
Click to collapse
Yes that will work! I used it cause I got lazy and didn't feel like changing the key file but it's much easier to use the green call key instead of the notification power widget
Sent from my GT-I9100 using Tapatalk
Try this:
Lock the screen normally, screen turns off.
To turn it on again by pressing any other screen buttons other than the power button.
I found that if I do it this way, the screen runs normal.

Capacitive Buttons Acting Weird

Alright so right after I restored my SM-N900W8 to the stock lollipop ROM it comes with I noticed something was wrong, When ever i use my fingers on the capacitive buttons the back button doesn't work at all and the menu button acts like i just long press it, but as soon as i use my stylus to press them they work perfectly fine, also in any other custom ROM they work fines with both my fingers and the stylus, could anyone tell me whats happening?

Enable onscreen navbar + disable capacitive buttons

Hello everyone,
I just bought a new HTC 10 Evo from eBay, and unfortunately the app switch button sometimes does not work properly.
Given that I don't have warranty, I rooted the phone, installed MAGISK and then I tried activating the on screen navigation bar.
Unfortunately, I have issues with completely deactivating the capacitive buttons. I tried editing the Generic.kl and other files from the Keylayout folder in SYSTEM, and while the lights of the capacitive buttons don't turn on anymore, the buttons still work when pressed (and vibrate). Does anyone know how to completely deactivate them?
Thanks in advance!

Categories

Resources