I need help as installed some file and so my screen just shows up sayin serial and v1.00 what should I do? Please.....I need help......ASAP
Need more info as you were obviously trying to reflash the device if it's in bootloader mode.
1: How far into the reflash did it get. (Progress Bars in the software)
2: Did it start at all? Did itcome up with an error eg: Error 120
3: Did you get ANY error at all?
Please be totally honest. You're not the 1st to do this.
Oh and as a footnote please lose the !!!!!!!!'s they're simply very annoying.
Psi
i clicked on the file in my phone and from then it just went straight to that information and displayed it nothing else honestly
Ok try this:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Psi
yh it works thank you very much. If i try and update the phone to Windows mobile 6.0 will this happen again?
Yay! Glad it works.
It shouldn't happen during normal reflashing, however if you look round you can see it has happened in the past. But never mind you know how to get out of that situation.
Psi
i have a u8800 from att i rooted with the one click method.. my friend wanted to buy it for his girl so i am trying to install a stock rom i place the dload file on my sd i got it to the point where it said it was unpacking and everything i stepped away for something to drink and all i have is a black screen and if i do a battery pull i get a quick vibration... i am stuck n need guidance
g4ess said:
i have a u8800 from att i rooted with the one click method.. my friend wanted to buy it for his girl so i am trying to install a stock rom i place the dload file on my sd i got it to the point where it said it was unpacking and everything i stepped away for something to drink and all i have is a black screen and if i do a battery pull i get a quick vibration... i am stuck n need guidance
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=1629398
i followed those steps but same thing just getting that vibrate and phone stays completely blank
g4ess said:
i followed those steps but same thing just getting that vibrate and phone stays completely blank
Click to expand...
Click to collapse
can you recognize your phone with adb or pink screen mode? if you can't, sorry g4ess I can't help you. I don't have idea
nope no pink screen its all black when i do a battery pull it just vibrates..
3. Post only using a clear subject and message.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem and a message that explains in detail what your problem is and what you've tried to solve it.
Click to expand...
Click to collapse
Please use search function and post in a existing thread with similar topic. So its much easier for you to get help, and for others to find the answers to similar questions. Dispersed information helps to nobody.
Hi, I hope someone can help me.
I have a Nexus 4 that I bought with fault.
It was stuck at the boot logo.
I have reinstalled everything back to stock using Nexus root toolkit. I also have done it manually using cmd. And various other ways I have found after googling it.
The only way I can get it to boot is if I install 4.2.0. It then starts up fine. It then finds an update to JB which it installs and then I`m back to the stuck boot logo again!
Now you are probably thinking why don't I just leave it at 4.2.0. I want Kitkat..
I have tried just about every link I can find and I appreciate some of you will try give me links which I may or may not have tried.
BUT I am desperate now.
I have rung up Google who said they would change the phone for me under warranty. The only issue is that they told me it was bought from America so it has to go back to the country of origin.
Any help would be gratefully received cheers John.
To add to this I have no imei number, no baseband, no Bluetooth address and no ip address does this help?
Download the Factory Image in https://developers.google.com/android/nexus/images?hl=pt-br#occamkot49h and use the "flash-all.sh" script contained therein. I had similar problem because I forgot a piece of the command, this script solved.
cnfs said:
Download the Factory Image in https://developers.google.com/android/nexus/images?hl=pt-br#occamkot49h and use the "flash-all.sh" script contained therein. I had similar problem because I forgot a piece of the command, this script solved.
Click to expand...
Click to collapse
I've tried one already but thanks. 2 days I've been trying stuff!
johnboywilson said:
I've tried one already but thanks. 2 days I've been trying stuff!
Click to expand...
Click to collapse
Probably a board failure, I doubt it's fixable.
My LG G2 D802 16GB 4.2.2 had a camera problem, if i tried to picture at night all the picture went blurry and smudgie..
i installed root and cwm so i can later install some camera mod, too.
after i installed the camera mod, nothing changed.. so i tried to flash 4.4.2 stock with "Flash Tool 2014", so i put the right KDZ file, and click Normal Flash.. it started loading but after a few seconds its stopped with error msg: Unable to connect to server, Try again in a moment" something like that..
someone on some forum told me to try to flash Hong Kong's 4.2.2 stock, so i tried it [with Flash tool too] but now i clicked CSE Flash, but after a few seconds the same **** happend to me again.. i tried it couple of time with some other KDZ's but nothing helped me..
Now the phone stuck on "Firmware Update" screen.. what can i do?
please answer me fast if you can..
i tried to ask every forum i know and no one answered it.. you all the smart proffesional guys you must know how to fix it..
if it will help you answer me, i did a EFS backup before all of that.
have a good day
p.s. sorry for my bad english..
EladOzery said:
My LG G2 D802 16GB 4.2.2 had a camera problem, if i tried to picture at night all the picture went blurry and smudgie..
i installed root and cwm so i can later install some camera mod, too.
after i installed the camera mod, nothing changed.. so i tried to flash 4.4.2 stock with "Flash Tool 2014", so i put the right KDZ file, and click Normal Flash.. it started loading but after a few seconds its stopped with error msg: Unable to connect to server, Try again in a moment" something like that..
someone on some forum told me to try to flash Hong Kong's 4.2.2 stock, so i tried it [with Flash tool too] but now i clicked CSE Flash, but after a few seconds the same **** happend to me again.. i tried it couple of time with some other KDZ's but nothing helped me..
Now the phone stuck on "Firmware Update" screen.. what can i do?
please answer me fast if you can..
i tried to ask every forum i know and no one answered it.. you all the smart proffesional guys you must know how to fix it..
if it will help you answer me, i did a EFS backup before all of that.
have a good day
p.s. sorry for my bad english..
Click to expand...
Click to collapse
Turn your pc into airplane mode, or anyway turn off any connection you have activated (Wifi ecc...)
Then try again.
I had the same problem, it was trying to reach the server, without internet connection it can't and everything will work
Even there is this pop-up, just wait. It is upgrading your phone in the background, have patience
Nicolo234 said:
Turn your pc into airplane mode, or anyway turn off any connection you have activated (Wifi ecc...)
Then try again.
I had the same problem, it was trying to reach the server, without internet connection it can't and everything will work
Click to expand...
Click to collapse
roobs said:
Even there is this pop-up, just wait. It is upgrading your phone in the background, have patience
Click to expand...
Click to collapse
thanks for the reply, but i tried to do what you guys said [wait\turn off the internet] and it didn't worked..
anyway, you replied me too late and in the mean time i sent the phone to repair.. can't wait to see if they will fix it because of the warranty.. but thanks again
EladOzery said:
thanks for the reply, but i tried to do what you guys said [wait\turn off the internet] and it didn't worked..
anyway, you replied me too late and in the mean time i sent the phone to repair.. can't wait to see if they will fix it because of the warranty.. but thanks again
Click to expand...
Click to collapse
have u set the network to 3qgct ? and then press normal flash?
this is the way our d802 models have to be flashed via kdz .
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
In both scenarios you cant access recovery or download mode. Phone just reboots and screen gone black with LED blinking red and blue to the eternity. I am here to help u restore your phone to former condition.
I take no credits for this , cause i just reuploaded files, and rewriten text and everything , cause old post on has been deleted and i cant find it anywhere, but i still got the files in my PC.
Just download all the files in folder at Drive, and folow instrucions given as they are. BTW there are pictures, so u can do it wrong only if u are ...u know.
Dont hold me responsible for any damage on your device. I tryed this metod about 10 times in a row, so i am confirming that it works.
This metod dont require you to short anything, its just click-click-click, connect...you get it .
Sorry cause my grammar, but my English is little rusty since i wasnt using it in a really long time.
Good luck people!
https://drive.google.com/folderview?id=0BxSHUEybMlBTWW8wY1VJeVEzdDA&usp=sharing
KDZ file which you put in flashtool folder : http://oceanhost.eu/dsqnjfke3ueq/D85520H_00.kdz.htm
Important. What about refurbished g3, flashing wrong kdz will cause a super brick, first off all check the variant from the motherboard or just on the back of phone.
boot verification Fail !!! - Cause: MISMATC SIG LEN
I had a problem s LG g3 d850: after trying to flash rikaveri phone is not charged and does not go into the kind of rekaveri oshybki boot verification Fail !!! - Cause: MISMATC SIG LEN, after etoj inscriptions tolto indicator flashes blue krasnіm i . Help how to get back in aparata robochem state.
Tried your method does not poluchaetsa can be detailed instructions ? On the phone firmware 6.0
Guys one thing to be kept in mind.most of refurbished d855 doesn't come d855 board.so such errors arise because of wrong model of recovery flashing.so confirm your model by opening your phone and looking at the board.
milance92 said:
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
In both scenarios you cant access recovery or download mode. Phone just reboots and screen gone black with LED blinking red and blue to the eternity. I am here to help u restore your phone to former condition.
I take no credits for this , cause i just reuploaded files, and rewriten text and everything , cause old post on has been deleted and i cant find it anywhere, but i still got the files in my PC.
Just download all the files in folder at Drive, and folow instrucions given as they are. BTW there are pictures, so u can do it wrong only if u are ...u know.
Dont hold me responsible for any damage on your device. I tryed this metod about 10 times in a row, so i am confirming that it works.
This metod dont require you to short anything, its just click-click-click, connect...you get it .
Sorry cause my grammar, but my English is little rusty since i wasnt using it in a really long time.
Good luck people!
https://drive.google.com/folderview?id=0BxSHUEybMlBTWW8wY1VJeVEzdDA&usp=sharing
KDZ file which you put in flashtool folder : http://oceanhost.eu/dsqnjfke3ueq/D85520H_00.kdz.htm
Click to expand...
Click to collapse
PLease i have thism problem cant fix it.......i dont have com port any more on my device manager only a QHSUSB_BULK please help me
duig said:
PLease i have thism problem cant fix it.......i dont have com port any more on my device manager only a QHSUSB_BULK please help me
Click to expand...
Click to collapse
What OS do you use ? Try to disable driver signing at starting your pc . Then reinstall drivers, restart PC, then pull battery out, conect device, and then insert batery . Should work .
milance92 said:
What OS do you use ? Try to disable driver signing at starting your pc . Then reinstall drivers, restart PC, then pull battery out, conect device, and then insert batery . Should work .
Click to expand...
Click to collapse
windows 10 how do i disable driver signing ??please
duig said:
windows 10 how do i disable driver signing ??please
Click to expand...
Click to collapse
Follow this guide.your question is answered there.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Jahanzaibawan said:
Follow this guide.your question is answered there.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Click to expand...
Click to collapse
this method u linked require to short mobo, my method dont, its way more simple.
milance92 said:
So many of us was at this point sometimes, maybe due to knowledge is poor, maybe its just glitches, but we all make mistakes, cause we are humans. So humans wanna show you how to fix your LG G3 D855 model when you get errors like : -Secure boot error (mostly due to wrong recovery flash,as far i know, you will correct me if am wrong anyway)
- Boot verification failed.
Good luck people!
Click to expand...
Click to collapse
Thank you so much! What would I do without you
Got "Boot verification failed" when I got into the secret menu and tried to do "device test".
I got Fulmics 6 ROM installed and the device failed for some reason to load the MiniOS (used by the "device test").
Wasted about 5 hours until I got to this post.
This post was so useful I almost cried out of joy.
THANKS!!!
EDIT:
mirrored the files in dropbox:
https://www.dropbox.com/sh/vn71zlrooyxe73d/AAABVAXEfYSQPlHhOLFql51Ra
For some reason the BoardDiag available here didn't work for me. It would always says "Serial port open FAILED".
I tried with willcracker version and it worked. You can download from here: http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
Just a few questions before I begin, I'm obviously... u know :
1. First, I install the drivers. In what state should the phone be in when I connect it to the PC? Probably in the only possible state, that means with the screen blank and the red and blue leds blinking, correct?
2. Do I have to remove the battery before connecting the phone?
3. Flashing the last partition, sbl1, causes the phone to reboot, right? So, in the last step when flashing the kdz, does the phone have to be in download mode?
Thanks!
FaserF said:
Thank you so much! What would I do without you
Click to expand...
Click to collapse
No problem man. I dont own G3 anymore, switched back to my beloved G Pro 2 d838 since its updated to CM 13 and CM 14.1 I gifted G3 to my GF. But i still can try something usefull and post here if i find some.
FaserF said:
Thank you so much! What would I do without you
Click to expand...
Click to collapse
Np bro.
Please help me. I have installed all drivers but my G3 D855 is not getting detected by my pc. My pc is running on Windows 7 64bit. Please help me..!
in case anyone is bothering with this in 2020+ on windows10, i did run into a few hiccups and managed to boot a 'bricked' phone I bought for 50 eur
1. Only install the approproate driver for your windows architecture of QDLoader
2. If LGFlashTool2014 is demanding mfc100.dll, you need to install a Microsoft Visual C++ 2010 Redistributable Package, yes, the x86 one: https://www.microsoft.com/en-us/download/details.aspx?id=5555
3. If after launching LGFlashTool2014 once, then closing, then launching again it doesn't turn on, you need to follow these steps: go to C:\Users\<YourWindowsUsername>\AppData\Local\Temp and delete everything you can, these are temporary files that programs on your pc store, they're not important, but LGFlashTool2014 for some reason makes some files that prevent it from launching
Since then the phone crashed a few times so I understand now how it got bricked, a faulty motherboard most likely, going to try baking it as described here: https://redd.it/5e0nx7 but this is irrelevant to the thread and just here for anyone stumbling upon in the distant dystopian future
Very informative post.
---------- Post added at 05:12 AM ---------- Previous post was at 04:53 AM ----------
very good post.