Database Users

[Q] Brick B80kas device

I would like to know if there is some news about the unbrick of B80kas devices.
Because I juste bricked mine today, black screen tried cold boot it doesnt start, i can conect it in apx mode, but what we can do ? ... I am so disapointed from what i did -_-

Do you have a custom recovery that works? And does ADB work? Since you can't use NvFlash if both of those are no I think you may be out of luck.

My custom recovery was working, but I can't boot on it, my tab don't want to start, and adb say me there is "no device found ".

merjeu said:
My custom recovery was working, but I can't boot on it, my tab don't want to start, and adb say me there is "no device found ".
Click to expand...
Click to collapse
A few threads here show people managed to unbrick using adb by pushing method.. Just search them in the Q&A section..

[Q] ZTE Blade not starting, maybe bricked...

I think my phone is bricked
When I start up my phone it just stops when it says "ZTE"
Tried to reboot but wont work, its fully charged...
Please help

Are you rooted? Do you have ClockworkMod installed? What rom were you running?

NO
matt4321 said:
Are you rooted? Do you have ClockworkMod installed? What rom were you running?
Click to expand...
Click to collapse
No. No. and none.
I weren't running any roms or anything, but i have tried to root it with z4root and gingerbreak (etc..) a million times...

Your best bet mate is to get into fastboot (should be doable since you're getting to the splash screen), flash a custom recovery and then a custom rom, although this does void your warranty, I think its worth it though. What android version was your phone on before the problems started?
Sent from my Xoom using Tapatalk 2

if he installs stock rom and unroots then it should be fine and he will keep his warranty
Sent from my Blade using xda premium

Ehhh..
matt4321 said:
Your best bet mate is to get into fastboot (should be doable since you're getting to the splash screen), flash a custom recovery and then a custom rom, although this does void your warranty, I think its worth it though. What android version was your phone on before the problems started?
Sent from my Xoom using Tapatalk 2
Click to expand...
Click to collapse
I dont quiet know how to do that
I was on 2.3.5 have 2gen stock rom
how do i get into fastboot then?

To get clockworkmod on, so you can flash your stock rom, which can be found here http://forum.xda-developers.com/showthread.php?t=1353526
Download fastboot and adb files, grab them either from the android website but through the sdk, or just Google adb and fastboot files and you'll be fine.
Then boot into fastboot by turning your phone on with the volume up button held down. It'll stay at the splash screen, connect to the PC and it should install drivers automatically.
Download the recovery image by googling clockworkmod zte blade. You want 5.0.2.0, it's the latest.
In the command prompt change directory to where your adb and fastboot files are. Then type 'fastboot flash recovery *nameofrecovery*.img'. Then 'fastboot reboot'. Power off the device after and boot into recovery by powering on with the volume down button held. Then flash your stock rom.
Hope this helps, i know it could be better but I'm at a BBQ so on my phone and can't link stuff easily, if you need more help, i can do it tonight. Others I'm sure will help too
Sent from my ZTE-BLADE using Tapatalk 2

matt4321 said:
To get clockworkmod on, so you can flash your stock rom, which can be found here http://forum.xda-developers.com/showthread.php?t=1353526
Download fastboot and adb files, grab them either from the android website but through the sdk, or just Google adb and fastboot files and you'll be fine.
Then boot into fastboot by turning your phone on with the volume up button held down. It'll stay at the splash screen, connect to the PC and it should install drivers automatically.
Download the recovery image by googling clockworkmod zte blade. You want 5.0.2.0, it's the latest.
In the command prompt change directory to where your adb and fastboot files are. Then type 'fastboot flash recovery *nameofrecovery*.img'. Then 'fastboot reboot'. Power off the device after and boot into recovery by powering on with the volume down button held. Then flash your stock rom.
Hope this helps, i know it could be better but I'm at a BBQ so on my phone and can't link stuff easily, if you need more help, i can do it tonight. Others I'm sure will help too
Sent from my ZTE-BLADE using Tapatalk 2
Click to expand...
Click to collapse
Still looks way to complicated for me :/
Do u know any videos that can show me how to do it?

hi is it bricked or what?
hi all xda members, im new on this forum and i really don know were to post or something like that, sorry, and i have searched on every singel page in google and on a lots of forums, and i dont find anything that can help me with my problem..:crying:
So now to my poroblem, i have a zte blade II 2.3.6 gen3 un-rooted, i tryed but no luck... and now i think its really bricked...because i cant boot it at all, not in FTM, not in bootloader mode, not in recovery, the only thing i can boot it in is DFU but i cant flash from there, it is bricked or can this be fixed easily? Thanx in advanced guys!

ZTE Blade does not respond at all
My ZTE Blade does not respond at all.
I have tried to install the official update from android 2.1 - 2.2 using this official application from ZTE
( ztedevices official site -> downloads -> Greece -> smartphone ->Blade)
It stopped in the middle of the process and after that I cannot use neither Power&volume(+) nor Power+volume(-) nor Power.
It looks completely dead.
Battery is fully charged,
When connected to charger, back button does not get red.
When connected to computer does not show android logo.
I have copied gen1 to gen 2 image folder to sd... nothing
gen2 to gen 1 the same.
I have also tried the AIO-BLADE application no respond to any action.
I have been searching this forum and the internet for 2 days now. No one answers cases whith hardbricked phones.
I think the phone is out of warranty.
PLZ it is my only smartphone and there is no money for a replacement, I am unemployed.
:crying:

SM-G900F Fastboot no device showing. ADB works though. Driving me mad

Hi all. Noob when it comes to adb and fastboot. installed 15 min adb-setup-1.4.3 and can see the device when using 'adb devices' command. Other adb commands work fine too. NOTHING happens when trying to use fastboot commands, no devices show up and if I use 'fastboot devices' command nothing comes up. Looked at loads of different webpage troubleshooting stuff (and yes, I have put phone into download / odin mode). What am I missing? Running cyanogenmod 12.1 with twrp 3.0.0. if that helps.
Only frustrated as I wanted to practice fastboot before I receive my new Xiaomi Redmi Note 3 Pro in a few weeks. At the moment i'll be flying blind whenI come to flash twrp and root the Note 3.
Again, ANY help or advice would be good. Talk to me like you would a child as i'm lost and confused.
Cheers guys

I'm pretty sure fastboot does not work for our devices, Odin is the 'fastboot' for us.
Sent from my SAMSUNG-SM-G900A using Tapatalk

Fastboot does not work with samsung devices lol

Bah! Had a feeling that was the case but couldn't find any definite yes / no answers. Cheers guys, i'll stol swearing at my computer now

Bricked A2017G

Hey Folks, i just bricked My Axon 7 some Days ago. It started randomly a reboot which i can't abort anymore. Everytime the Device get's a Charge does it start again. I can't enter TWRP or Fastboot (Reboots after a few Seconds). Same for the Flash Mode. It is now completely discharged and i don't know how to recover it. Any Ideas?
Think i can't fix this, but asking here don't hurts... :angel:

4th grade unbrick guide here in the Forums. That helped me after i cannot access any Mode. No Flash Mode, No EDL, No USB, No Qualcomm Loader. Axon 7 too.
https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898

HighSierra1014 said:
4th grade unbrick guide here in the Forums. That helped me after i cannot access any Mode. No Flash Mode, No EDL, No USB, No Qualcomm Loader. Axon 7 too.
https://forum.xda-developers.com/axon-7/how-to/a2017-4th-category-brick-repair-manual-t3585898
Click to expand...
Click to collapse
Lol. I made a guide based on that one but updated, called DFU unbrick, because everybody had to read my comments there anyways to be able to do it. Not sure why everyone still uses the old one ?
@Miustone: If you want, you can try an EDL cable first. A lot of people say that they could get out of DFU that way. (assuming that you can get into EDL/DFU that is). Google my guide, it's called "DFU unbrick", if the EDL cable doesn't work

Thanks Guys! I will take a look on the DFU unbrick and the EDL Cable. At least a blink of Hope for this great Device... Still good as new, would be sad to use it just as a golden Sculpture lol

Miustone said:
Hey Folks, i just bricked My Axon 7 some Days ago. It started randomly a reboot which i can't abort anymore. Everytime the Device get's a Charge does it start again. I can't enter TWRP or Fastboot (Reboots after a few Seconds). Same for the Flash Mode. It is now completely discharged and i don't know how to recover it. Any Ideas?
Think i can't fix this, but asking here don't hurts... :angel:
Click to expand...
Click to collapse
Hey, sorry for asking but how did you brick it? I am thinking about installing a custom ROM, rooting etc and I would just like to know if it was something in specific so I can stay away from it. Cheers.

Help! MotoG5 Plus short bootloops after wrong wipe :(

Hi there!
Unfortunately my Moto g5 Plus, after reinstalling Arrow Os had a problem, then while trying to make a clean install, I accidentally have wiped system and probably too many boxes. (model: Xt1685)
At this point the phone bootloops but even when in fastboot turns off after 5 seconds, so I have no chance to transfer files or fix the problem via USB or with a repair software by Lenovo.
What can I do at this point?
I have a bricked phone and I can't get to Recovery and I do not have access at fastboot more than 5 seconds. I have the microsd installed but the phone won't stay put for long enough so that I can install anything...
What do you recommend?
Best,
Andrea

Tungsteno said:
Hi there!
Unfortunately my Moto g5 Plus, after reinstalling Arrow Os had a problem, then while trying to make a clean install, I accidentally have wiped system and probably too many boxes. (model: Xt1685)
At this point the phone bootloops but even when in fastboot turns off after 5 seconds, so I have no chance to transfer files or fix the problem via USB or with a repair software by Lenovo.
What can I do at this point?
I have a bricked phone and I can't get to Recovery and I do not have access at fastboot more than 5 seconds. I have the microsd installed but the phone won't stay put for long enough so that I can install anything...
What do you recommend?
Best,
Andrea
Click to expand...
Click to collapse
Reflash stock firmware with fastboot.exe
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my Moto E (4) using Tapatalk

sd_shadow said:
Reflash stock firmware with fastboot.exe
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
I will try that, thanks.
But do you think this works if the phone reboots after 5 seconds of fastboot mode?