Hi,
I just got an usb to mini jack cable but when i play audio it plays via the speaker and not the headphones.
is the cable not supported or do i need to change a setting somewhere
If i use the headphones that were with the phone they work.
But not my new usb to mini jack with my own headphones.
I also have a bleutooth unit but this uses mini-mini jack, and i twas supplied with a headphone inc Mic, the normal adapters for mini-mini jack to mini jack will enable the Mic all the time and can't play stereo, is there a solution for this?
I was already thinking about using tape or something
(the plug for headphones + mic is divided in 3 parts and a normal plug is divided in 2 parts)
thanks for any advise
Hi Everyone,
I plugged my A7 through the HDMI port to my projector, it works with no issues whatsoever! But the sound jack doesn't work once the HDMI is plugged. Is there a way to force the sound to work even if HDMI is plugged in? Or even the speakers?
Thank you,
Marc
I have run into this issue with other devices, not the A7 yet though.
Once HDMI was connected the device only wanted to send audio over it and disabled all others.
My projector had RCA L/R out, but no internal speakers.
What I ended up having to do was get a RCA -> headphone jack adapter from Radio Shack and use regular PC speakers from that.
Probably not the solution you were looking for, but I hope it helps.
Possible solution
The option I'm looking at right now is an HDMI switch. It has 2 inputs for HDMI and outputs 4 HDMI and an RCA. I'm not really insterested in dishing out the 70$ for it though.
The Nexus 5X's USB Type-C port can both input and output audio, however mine needed some setting up before it would work.
I plugged in a Blue Yeti microphone into the Nexus 5X using both the USB Mini-B to USB Type A cable (comes with the Yeti), and the USB-A female to USB-C male adapter from Google. The Yeti powered on instantly, it's red light turned on, and I could hear myself through its no latency monitoring via headphones (Blue Yeti has a 3.5mm headphone output), however the 5X would not recognize the Yeti as either an audio input nor as an audio output device.
I went into Developer Options, scrolled down to "Select USB Configuration" and changed the radio button selection to "Audio Source". I scrolled down even farther to the Media section, and there I disabled "Disable USB Audio Routing" (you might say that I enabled USB audio routing). There was no immediate effect, so I unplugged the Yeti, plugged it back in, et voila! The phone recognized the Yeti as both a microphone AND an audio playback device simultaneously.
I don't know for sure which of those two settings truly made a difference, as now that I've got USB audio to work, neither of those settings seems to make a difference anymore -- it seems as though my Yeti is permanently approved for USB audio in my 5X!
The USB audio works for listening to Google Music, and even for regular voice phone calls.
Do you have a USB microhone/headset/headphones/DAC? Get a good USB-A female to USB-C male adapter and you'll be quite pleased! And hopefully you'll be luckier than I was and it'll just work when you plug it in, but if not then toggle those USB audio Developer Options as described above.
Finally someone has posted on audio out and in via USB c! Thanks!
Just plugged the 5X into a Focusrite Scarlett 18i20. The phone recognizes the first two input channels and can record in mono or stereo (input 1 as left track and input 2 as right track).
Also it does seem as though you must keep the "Disable USB audio routing" off for it to work.
Sweet, guess I won't need the SoundAbout app anymore.
This is really nice. Able to route usb audio to a Cambridge Audio DacMagic. Much better than the on-board dac, and no longer tied to a specific app.
decided to add this on my index
[INDEX] LG NEXUS 5X Resources Compilation Roll-Up
Isn't this just a USB sound card over OTG? I plugged in a Logitech sound card with line out and mic in and it worked without any tweaks.
My 6th gen iPod nano plays usb audio perfectly fine on my crappy pioneer deh-3300ub headunit, but no matter what settings or cables I try the stereo says "N/A USB" with my N5X plugged in.
Anyone get the audio-in-via-usb to work with the built-in Google camera/camcorder app?
I am using Nexus 6P
The audio-in DOES work with this video app: https://goo.gl/Dtu14
But with the built-in camcorder, it only records audio from the phone's mic, not the usb mic.
mptpro said:
Anyone get the audio-in-via-usb to work with the built-in Google camera/camcorder app?
I am using Nexus 6P
The audio-in DOES work with this video app: https://goo.gl/Dtu14
But with the built-in camcorder, it only records audio from the phone's mic, not the usb mic.
Click to expand...
Click to collapse
I would think google designed it to only use built in microphone. It would take some mods or tinkering to get it to do otherwise.
---------- Post added at 11:25 PM ---------- Previous post was at 11:23 PM ----------
makogaleos said:
The Nexus 5X's USB Type-C port can both input and output audio, however mine needed some setting up before it would work.
I plugged in a Blue Yeti microphone into the Nexus 5X using both the USB Mini-B to USB Type A cable (comes with the Yeti), and the USB-A female to USB-C male adapter from Google. The Yeti powered on instantly, it's red light turned on, and I could hear myself through its no latency monitoring via headphones (Blue Yeti has a 3.5mm headphone output), however the 5X would not recognize the Yeti as either an audio input nor as an audio output device.
I went into Developer Options, scrolled down to "Select USB Configuration" and changed the radio button selection to "Audio Source". I scrolled down even farther to the Media section, and there I disabled "Disable USB Audio Routing" (you might say that I enabled USB audio routing). There was no immediate effect, so I unplugged the Yeti, plugged it back in, et voila! The phone recognized the Yeti as both a microphone AND an audio playback device simultaneously.
I don't know for sure which of those two settings truly made a difference, as now that I've got USB audio to work, neither of those settings seems to make a difference anymore -- it seems as though my Yeti is permanently approved for USB audio in my 5X!
The USB audio works for listening to Google Music, and even for regular voice phone calls.
Do you have a USB microhone/headset/headphones/DAC? Get a good USB-A female to USB-C male adapter and you'll be quite pleased! And hopefully you'll be luckier than I was and it'll just work when you plug it in, but if not then toggle those USB audio Developer Options as described above.
Click to expand...
Click to collapse
Can you test and report which apps can record audio with the blue yeti? free and/or paid, if you have the time to test of course.
hi! I buy one of this adapter usb-c to 3.5 jack, beacuse my 3.5 jack has broken. I dont find how enable the output audio to work with my headphones. someone can help me? thanks!
chavook said:
hi! I buy one of this adapter usb-c to 3.5 jack, beacuse my 3.5 jack has broken. I dont find how enable the output audio to work with my headphones. someone can help me? thanks!
Click to expand...
Click to collapse
That's because you most likely did just get a basic 3.5mm to USB-C adapter with no active circuit. I'm fairly certain that Nexus 5X do not support analog passthrough over USB-C, which means you will need something with active circuitry.
Sent from my Le X829 using Tapatalk
chavook said:
hi! I buy one of this adapter usb-c to 3.5 jack, beacuse my 3.5 jack has broken. I dont find how enable the output audio to work with my headphones. someone can help me? thanks!
Click to expand...
Click to collapse
GethPrime said:
That's because you most likely did just get a basic 3.5mm to USB-C adapter with no active circuit. I'm fairly certain that Nexus 5X do not support analog passthrough over USB-C, which means you will need something with active circuitry.
Sent from my Le X829 using Tapatalk
Click to expand...
Click to collapse
You need a portable DAC (get a cheap one like Fiio A1 for 25usd). Nexus 5X USB-C is not USB3/3.1 interface, so it won't work.
Because this phone will be using the usb c connection to transfer audio with, will it be able to use external dac's such as the audioquest dragonfly or the chord mojo with out the need for an app like usb audio player pro?
The whole idea with usb audio is to remove DAC from the phone, enabling best audio earphones can produce. Which DACs are supported, I don't know.
With my Pro3 i just needed one of these: goo.gl/uGYUH4
My Oppo HA2 works perfectly with it.
Does the ordinary headsets with controls on wire like answer button or volume keys work with usb 3 adapter?
Hey just acquired an essential phone but it didn't come with the audio jack anyone know an alert antivenin that works I tried two active adapters from eBay but they both don't work.. Any suggestions TIA
Check this thread:
https://forum.xda-developers.com/es...ial-ph-1-list-compatible-usb-c-t3726018/page8
There are quite a few suggestions there for adapters that are confirmed working with PH-1.
It has to be an adapter with a built in DAC. (the more expensive kind)
there are other phones that basically use just a converter cable and output analog audio through the USB C port, since those are just changing USB C to a headphone jack they are pretty common and cheap.
The essential phone outputs digitally to a USB digital audio converter chipset built into the converter rather than just straight analog audio.
So just make sure the adaptor you are looking at says it has a built in DAC and it should work.
sometimes they dont list it though so if you are going for a cheap one then you may have to rely on someone in the reviews having an essential phone.
most razer phone and google pixel adaptors work but I'd still verify they have a DAC, sometimes amazon listings will just list a whole slew of compatible phones.