Database Users

Not possible to do a complete backup under Recovery TWRP

Hello everyone.
I am new owner of an S7 Edge and so I root it is ok!
I have installed a recovery version 3.0.2.4 this is ok too but I have a concern to make a full backup.
1 - When starting recovery I have a screen that says "Installing zips or operations via adb may change the system partition".
2 - When I want to do a backup I have these 03 options that are checked.
Booting
System
Data
But when I drag to make this backup I have error messages
Here are the images to better understand.
I think I have forgotten something, could you orient me please?
Thank you for your help.

encrypted data...... so if you want do a backup try out flashfire......

Working fine with flashfire !!
But there is still the solution of real recovery?
How to decrypt the data?
To make a backup?
Thanx !

1. Reboot to TWRP, Wipe > Format Data > Type 'yes'. This will wipe all the data on your phone including internal storage.
2. Don't reboot, and flash either SuperSU or one of the zips from here (latest version would be preferred). Since you have to wipe your internal storage in the previous step, put the zip in your external sdcard beforehand or flash it through adb sideload if you know how to.
Be careful when flashing stock firmware with odin, as it will automatically encrypt your device again. After you flash stock firmware, reboot directly into download mode again, flash TWRP, reboot to TWRP, and then follow step 2.

Hi !
I will download a stock rom in case of problem and I come back to give the results.
Big thanks !!! :good: :good:

kykint said:
1. Reboot to TWRP, Wipe > Format Data > Type 'yes'. This will wipe all the data on your phone including internal storage.
2. Don't reboot, and flash either SuperSU or one of the zips from here (latest version would be preferred). Since you have to wipe your internal storage in the previous step, put the zip in your external sdcard beforehand or flash it through adb sideload if you know how to.
Be careful when flashing stock firmware with odin, as it will automatically encrypt your device again. After you flash stock firmware, reboot directly into download mode again, flash TWRP, reboot to TWRP, and then follow step 2.
Click to expand...
Click to collapse
Work perfectely very very good !
Thanks for answers !!

Backup existing Data after fresh install of TWRP before ROOT

Hello,
I have an S7Edge and looking to flash it. I am currently in Nougat 7.0 and would like to backup my data before proceeding with the root.
I have flashed the phone with TWRP but when following this tutorial: https://forum.xda-developers.com/s7...overy-official-twrp-hero2lte-3-0-0-0-t3334084
People say that you have to format the Data Partition in order to proceed with the installation of SuperSu and NO Dm verity.
Is there a way to backup my phone data [w or w/o TWRP] before ROOTING my phone with TWRP (format data partition to decrypt, install no dm verity and install super su)? This is so after my phone is rooted, I can restore all the apps, pictures, etc.
Thank you for the help! :fingers-crossed:

rods91 said:
Hello,
I have an S7Edge and looking to flash it. I am currently in Nougat 7.0 and would like to backup my data before proceeding with the root.
I have flashed the phone with TWRP but when following this tutorial: https://forum.xda-developers.com/s7...overy-official-twrp-hero2lte-3-0-0-0-t3334084
People say that you have to format the Data Partition in order to proceed with the installation of SuperSu and NO Dm verity.
Is there a way to backup my phone data [w or w/o TWRP] before ROOTING my phone with TWRP (format data partition to decrypt, install no dm verity and install super su)? This is so after my phone is rooted, I can restore all the apps, pictures, etc.
Thank you for the help! :fingers-crossed:
Click to expand...
Click to collapse
Dear All,
I would really appreciate if anyone could help me on the question above. Need to get my phone rooted but want to have it backed up first.
Thank you!

Same thread here https://forum.xda-developers.com/s7-edge/help/please-help-bought-7-edge-t3571403
Still no solution

smaberg said:
Same thread here https://forum.xda-developers.com/s7-edge/help/please-help-bought-7-edge-t3571403
Still no solution
Click to expand...
Click to collapse
Hi,
Thank your forwarding me to your thread. I think I figured out a way to fully back it up with the following steps:
1) If you are in Nougat, downgrade to 6.0.1
2) Root your phone by flashing CF-Auto-Root in Odin (it should not wipe any data)
3) Once phone is rooted, you can backup your phone with TitaniumBackup or Flashfire
4) Save the backup in your sd or other external
5) Update phone with official or custom Nougat FW
6) Root phone via custom recovery (TWRP), will have to format all your data
7) One phone fully booted up and rooted, restore from backup with TitaniumBackup or Flashfire
Let me know how it goes

Recover Stock [unroot] VNS-L31C432B160

I just rooted my P9 lite, installed TWRP from the SRK Guide in here and then saw that Snapchat checks for root.
So now i would like to unroot (doesnt work in SuperSU), install Snapchat, Root und save with TitaniumBackup.
How does the process of returning to stock work? Where do i get my .zip?

I understand that i need to download my full ROM [Firmware Finder APP] but how do i procees further? Do i need to have stock recovery for dload method?

The unroot option in SuperSU does not work? :/
Download the stock firmware from here: https://forum.xda-developers.com/huawei-p9lite/development/stock-firmware-links-t3468245
Extract the dload folder which has the UPDATE.APP inside, put the dload folder in your microSD card, power off the phone, hold power button + volume up + volume down and wait until the installation will start.
This will relock your bootloader and restore the phone to stock firmware.

Does it matter that i have a ****ty twrp installed which doesnt even recognize data partition?
And can i unlock bootloader and root the samw way as before?
Thanks in advance
Wims

You can unlock and root as you already did. Which TWRP are you using?

Potato997 said:
You can unlock and root as you already did. Which TWRP are you using?
Click to expand...
Click to collapse
I had a ****ty one from the Guide with the srktoolkit. Now i updated to TWRP v4 by METICULUS. It works and i can finally see /data/media again.
Does the Phone Off then 3 Button trick go through the Recovery or through what exactly?
I would now do the thing above, then unlock my Bootloader again (i still have the key so it should be easy), install the TWRP by METICULUS, install my apps i need to install without root (Snapchat) , then reboot to twrp and flash newest supersu from chainfire. Finished. Am i right?
Btw i have to say that i was pretty much a flashaholic with tht Galaxy S3, Moto G and OnePlus 2 and it was never this tricky i think :'D

Well TRWP still doesnt get /data. I didn't encrypt anything but Twrp keeps telling me that it cant find it. And when i (select storage) (internal storage) it goes to /emmc...

At first the log says:
Failed to mount '/data' (mounted without encryption)
And the Screenshots were saved to /data/media/Pictures/Scrennshots insted of somwhere in the internal storage...
I fear of having my partitions mixed up somehow because when stock recovery couldn finish wiping cache and data too...

Probably TWRP can't mount encrypted Huawei data partition, the only thing it can probably do is to format it so basically a hard reset

Potato997 said:
Probably TWRP can't mount encrypted Huawei data partition, the only thing it can probably do is to format it so basically a hard reset
Click to expand...
Click to collapse
So -> TWRP -> Format /data?
EDIT: I tried format data -> yes -> and even there it said can't find /data partition.
Any ideas what i can do?? Everything works but i can't do anything in all the TWRPs...

How can I install Oxygen OS 5.0.1 with an unlocked bootloader?

Good day!
Our country just received the Oxygen OS 5.0.1 update.
How can I install it with an unlocked bootloader?
I was going to relock it but I found out that if I did, my data will be gone.
The only difference in the set-up of my phone from a stock OP5 is the unlocked bootloader.

Flash through stock recovery

Hitman478™ said:
Flash through stock recovery
Click to expand...
Click to collapse
I haven't done this kind of thing yet.
If I do this, will my data be wiped out or not?

What about using the OTA notification ?

quick05 said:
What about using the OTA notification ?
Click to expand...
Click to collapse
What do you mean?
I tried to update my phone using the normal way but after downloading and tried to install it, it failed because my bootloader is unlocked.

I just made a backup of data using codeworkx recovery. Copied the backup (Along with the files on userdata I wanted to keep) to my PC.
Wiped all and formatted data. Then installed Oreo and copied back the files and data backup from the pc to the phone and restored data with codeworkx recovery again.
Then flashed magisk 15.2 and rebooted.
Everything working fine now.

shriekyphantom said:
Good day!
Our country just received the Oxygen OS 5.0.1 update.
How can I install it with an unlocked bootloader?
I was going to relock it but I found out that if I did, my data will be gone.
The only difference in the set-up of my phone from a stock OP5 is the unlocked bootloader.
Click to expand...
Click to collapse
I managed to flash Nougat without locking my bootloader. But I also had to Format the Data partition to make it work. I used Titanium Backup to backup the data of the Apps and Myapplist to make a list of the apps. After installing Oreo I only needed to spent 1 hour to restoring the app data.

pleomaxell said:
I managed to flash Nougat without locking my bootloader. But I also had to Format the Data partition to make it work. I used Titanium Backup to backup the data of the Apps and Myapplist to make a list of the apps. After installing Oreo I only needed to spent 1 hour to restoring the app data.
Click to expand...
Click to collapse
Hello, I'm interested in the same thing.. I have oxygen osv4.5.x received notice for is 5.0.1 and want to install. I have an unlocked bootloader and am also rooted w/magisk. I want to keep my unlocked bootloader and root after upgrading. I also want to do a "clean" install.
Can anyone provide detail instructions, including best back up method of data and links to any files needed (twrp, magisk, etc) thanks

jmoricone said:
Hello, I'm interested in the same thing.. I have oxygen osv4.5.x received notice for is 5.0.1 and want to install. I have an unlocked bootloader and am also rooted w/magisk. I want to keep my unlocked bootloader and root after upgrading. I also want to do a "clean" install.
Can anyone provide detail instructions, including best back up method of data and links to any files needed (twrp, magisk, etc) thanks
Click to expand...
Click to collapse
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.

pleomaxell said:
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Click to expand...
Click to collapse
Thank you... I like everything about my current build..should I wait to upgrade... Any other issues with Oreo?

jmoricone said:
Thank you... I like everything about my current build..should I wait to upgrade... Any other issues with Oreo?
Click to expand...
Click to collapse
I honestly dont see a big difference yet, but only had it for two days. Feels a bit snappier, my signal a bit stronger, and probably an improvement with battery life. I had issues upgrading but then again I flashed the wrong version of magisk. I think the most important thing is the latest android security update.

SysAdmNj said:
I honestly dont see a big difference yet, but only had it for two days. Feels a bit snappier, my signal a bit stronger, and probably an improvement with battery life. I had issues upgrading but then again I flashed the wrong version of magisk. I think the most important thing is the latest android security update.
Click to expand...
Click to collapse
Hey, thanks.. I will update later today. I see you provided which version of twrp (twrp-3.2.1-0-universal-codeworkx-cheeseburger.img). But what is the difference between the version you noted and the one I found (twrp-3.2.1-0-oreo-8.0-codeworkx-cheeseburger.img)
I want to make sure I have the correct version.
Thanks again

jmoricone said:
Hey, thanks.. I will update later today. I see you provided which version of twrp (twrp-3.2.1-0-universal-codeworkx-cheeseburger.img). But what is the difference between the version you noted and the one I found (twrp-3.2.1-0-oreo-8.0-codeworkx-cheeseburger.img)
I want to make sure I have the correct version.
Thanks again
Click to expand...
Click to collapse
You can ask that question on the TWRP thread. May be they can answer it correctly. I guessed that twrp-3.2.1-0-universal-codeworkx-cheeseburger.img was for both Nougat and Oreo and that is why I used it. So, if you want to be sure you should ask that on a TWRP thread.

pleomaxell said:
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Click to expand...
Click to collapse
Hello, I was reviewing the process and just downloaded everything onto my computer and transferred onto my phone but have a few questions regarding some of the steps.
* Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP
** Can I update TWRP via the official app and is that version of TWRP okay to use over the "twrp-3.2.1-0-universal-codeworkx-cheeseburger.img"
* Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes' / This deleted my Internal Storage so I had to backup everything beforehand.
** How, what and where did you back up your data? Because later you mentioned "deleted my Internal Storage". I am guessing that because the OP5 does not have an external SD card everything is wiped and the new OS 5.0.1 needs to be saved onto a computer and then re-transferred back onto the phone. I am also guessing that the backup will need to be saved onto a computer as after wiping the phone it would also delete that file too, correct?
* Mounted the internal storage by using the Mount option from TWRP main menu.
** I am assuming that this option after the data wipe is self explanatory?
* I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
** This is what makes be believe all the files should be on a computer. How did you reboot and when you did, does it go directly / back to TWRP?
* Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots. / Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
** I am guessing here that once OS v8 is installed the TWRP img is no longer on the phone. I would need to transfer the TWRP back onto the phone then re-flash? Could I just install the TWRP official app and flash that way?
Thanks

jmoricone said:
Hello, I was reviewing the process and just downloaded everything onto my computer and transferred onto my phone but have a few questions regarding some of the steps.
* Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP
** Can I update TWRP via the official app and is that version of TWRP okay to use over the "twrp-3.2.1-0-universal-codeworkx-cheeseburger.img"
* Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes' / This deleted my Internal Storage so I had to backup everything beforehand.
** How, what and where did you back up your data? Because later you mentioned "deleted my Internal Storage". I am guessing that because the OP5 does not have an external SD card everything is wiped and the new OS 5.0.1 needs to be saved onto a computer and then re-transferred back onto the phone. I am also guessing that the backup will need to be saved onto a computer as after wiping the phone it would also delete that file too, correct?
* Mounted the internal storage by using the Mount option from TWRP main menu.
** I am assuming that this option after the data wipe is self explanatory?
* I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
** This is what makes be believe all the files should be on a computer. How did you reboot and when you did, does it go directly / back to TWRP?
* Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots. / Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
** I am guessing here that once OS v8 is installed the TWRP img is no longer on the phone. I would need to transfer the TWRP back onto the phone then re-flash? Could I just install the TWRP official app and flash that way?
Thanks
Click to expand...
Click to collapse
You have to flash TWRP by going to fastboot mode .
If you are rooted only then the TWRP app works

Aarju said:
You have to flash TWRP by going to fastboot mode .
If you are rooted only then the TWRP app works
Click to expand...
Click to collapse
Yes I am currently rooted. Once I flash the new OS will I still have root access to use the TWRP official app? Is that why after flashing new OS you need to flash TWRP via fastboot?
What about the backing up? I also have full titanium, thanks.

jmoricone said:
Yes I am currently rooted. Once I flash the new OS will I still have root access to use the TWRP official app? Is that why after flashing new OS you need to flash TWRP via fastboot?
What about the backing up? I also have full titanium, thanks.
Click to expand...
Click to collapse
After flashing the new rom you will be flashed stock recovery and you have to flash it through fastboot and flash magisk again.

Aarju said:
After flashing the new rom you will be flashed stock recovery and you have to flash it through fastboot and flash magisk again.
Click to expand...
Click to collapse
Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...

jmoricone said:
Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...
Click to expand...
Click to collapse
Wipe data and then copy the rom full zip flash it boot it to the starting screen then boot to recovery and then flash magisk ,you will see no errors.

Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...
I received the following tip
"Wipe data and then copy the rom full zip flash it boot it to the starting screen then boot to recovery and then flash magisk ,you will see no errors."
But this makes no sense to me.
I have formatted my phone / wiped data / have the full rom & magisk on my "/sdcard" / went to install zip via TWRP, selected the rom and received the error message.
I decided to just go and upgrade via OTA and that failed. My phone has rebooted back to stock
what am i doing wrong?

Wifi Wi-Fi is broken after restore backup data and system with TRWP, solutions?

hi guys
after restoring twrp backup (data and system)
WIFI is broken, no way to make it work again, even restoring persist backup from twrp or flashing the original persist
not either deleting file contect of wifi_mac.bin in root/persist
does anyone know how to make wifi working again after TWRP restore of data and system?
differently TWRP is totally useless for backup in Mi A2 at the current state.

Espmic86 said:
hi guys
after restoring twrp backup (data and system)
WIFI is broken, no way to make it work again, even restoring persist backup from twrp or flashing the original persist
not either deleting file contect of wifi_mac.bin in root/persist
does anyone know how to make wifi working again after TWRP restore of data and system?
differently TWRP is totally useless for backup in Mi A2 at the current state.
Click to expand...
Click to collapse
flash the original boot.img from the same system version installed in your device.
If V9.6.15.0.ODIMIFE, download the same OTA image version package, unzip it, get only boot.img and use fastboot to flash it into your device.
fastboot flash boot_b boot.img
fastboot flash boot_a boot.img
I hope this works

Espmic86 said:
hi guys
after restoring twrp backup (data and system)
WIFI is broken, no way to make it work again, even restoring persist backup from twrp or flashing the original persist
not either deleting file contect of wifi_mac.bin in root/persist
does anyone know how to make wifi working again after TWRP restore of data and system?
differently TWRP is totally useless for backup in Mi A2 at the current state.
Click to expand...
Click to collapse
Flash this kernel from temp twrp. https://forum.xda-developers.com/mi-a2/development/kernel-hex-t3855773
It worked for me.

Tnx man. After flash kernel magisk doesn work.
How do i reinstall magisk now? You Need the "patch boot Image" method in order to support OTA. But boot Image now is not stock, cause It s updated with the new kernel so i cant use the official boot.img , should extract the new One from My device? How?
Or should i flash magisk 17.1 from TWRP? But still cant, because TWRP install s It in Active slot offline TWRP (at the moment) and not in the needed boot partition.
****, help It s getting too annoying ahahah

Espmic86 said:
Tnx man. After flash kernel magisk doesn work.
How do i reinstall magisk now? You Need the "patch boot Image" method in order to support OTA. But boot Image now is not stock, cause It s updated with the new kernel so i cant use the official boot.img , should extract the new One from My device? How?
Or should i flash magisk 17.1 from TWRP? But still cant, because TWRP install s It in Active slot offline TWRP (at the moment) and not in the needed boot partition.
****, help It s getting too annoying ahahah
Click to expand...
Click to collapse
Download the magisk zip and boot into twrp and just flash it. You can switch the partitions in twrp and flash magisk. Just don't reboot twrp after switching the partitions.The latest twrp from Tingyichen can be downloaded from this thread.
https://forum.xda-developers.com/mi-a2/development/recovery-unofficial-twrp-recovery-mi-a2-t3825146
the command is fastboot boot twrp-3.2.3-jasmine-20181020.img and it goes straight into twrp with no flashing required.

booting directly in twrp with command and without flashing it in any partion caused me bootloop and data wipe, also have read this in another thread (twrp one)

Did you use the latest one from 20/10?