Hi Masters,
Need your advice here.
My p9 lite cannot boot up and only shows your device is booting now screen.
I cannot power off even force power off, and there is no responding whatever key combinations i pushed.
The step taken to this error is I did unlock my p9 lite and tried to flash twrp by following the guide, then I cannot enter fastboot mode and recovery mode after that.
I tried take out the battery and let the phone disconnect with power supply, after i put back the battery, i push the power key it still shows same screen as your device is booting now.
Any idea how to resolve this? I assume some fatal error with the motherboard, but i can say nothing after i unlock the phone.
Your suggestion and advice are much appreciateļ¼ thank you!
I had the same problem,what I did was force power off by holding power button for ,well idk how long but until device booted down,then I held volume down and connected it to pc,so it enters fastboot,but you have to do it fast,as it will reboot once its turned off.Then I tried various twrps,revolution recovery etc,and the only one that worked was meticulus twrp.I know you said you cant force power off,but try holding power key long
Once you hold the power off button, the phone will never power off, instead, the phone will reboot and bring you to the error page "your device is booting now" and stuck there. I tried to push the power up or power down button before i see huawei logo, but it will show me the same page.
Yes,when you hold power off phone will reboot,and you have to be fast with volume down and cable.Pre-plug the cable it computer ,bring it near phone,power off and before it boots plug it in while holding volume-
thank you for your suggestion. I tried many times, no matter how quickly i am, I only able to see the device booting page. I have mentioned one point above, i did take out the battery, and i see the error screen after i put back the battery, so i assume the problem with motherboard.
How many of you did return the faulty and unlocked phone to service centre then get "free" services?
Related
Hi
need help!!!!!
My phone is completely messed up.
i got an update form LG.
after installing it the phone got suck in boot loop.
I has CWM installed.
i but could and even when try to install new rom it was still in boot loop.
i installed manual via adb commands TWRP.
and then thing became real bad.
no after it powers up i get the LG logo.
1 sec after i get few error codes and then black screen without ADB support.
i trierd to get into download mode after reading in forums that only this can help.
but I can't.
I powered down my phone in all possible methods:
power 10sec, power + V- 10 sec, power + V+ 10 sec.
after the phone is off i tried power it back into download mode with the next combinations:
power + V+ and then USB, power + V- and then USB,power + V+ and V- and then USB.
did not work.
can't get into download mode.
I will be happy to get some help.
Thanks
Ran :good:
sorry was wrong.
try turn phone off, add usb, then press volume up. I think that's it.
Hi
did no work also
I am having the same problem, went to lg service centre, they could not enter download mode as well. I might need to change the circuit board for $321 singapore dollars..
Hi
i think you have to use this fix: http://forum.xda-developers.com/showthread.php?t=2582142
This happened to me,
Try holding the power and volume down hold until lg logo, let go and press and hold the volume down and power again, it should get you in recovery.
It might get you into a screen called "Factory hard reset" Agree using the power button, and it should take you to your recovery, and try flashing a ROM along with the Gapps (if you want, which I did) and then I used a recovery file after booting back into recovery to restore it to my previous state.
Good luck :good:
Shut down phone
From what I got from this, you're having problems shutting down your phone, correct? It keeps booting back up after the screen goes black? If this is the case, hold the power button (and don't let go) until it goes black, reboots itself, then goes black again. Shouldn't take more than 2 seconds after rebooting to shut down. Then, you can do volume up + USB to get into download mode.
Ben_Z98 said:
From what I got from this, you're having problems shutting down your phone, correct? It keeps booting back up after the screen goes black? If this is the case, hold the power button (and don't let go) until it goes black, reboots itself, then goes black again. Shouldn't take more than 2 seconds after rebooting to shut down. Then, you can do volume up + USB to get into download mode.
Click to expand...
Click to collapse
Thanks for your help,it sorted out my problem! :good:
Hi guys,
I can not turn on my huawei y625-u21. When i am trying to switch it on, phone freezes on huawei logo (first screen which is shown on start - probably called boot screen). I am not able run also recovery mode (vol+) or update mode (vol+ and vol-), so i am not able to perform update of firmware from sd card. Is there any other way to to perform update (flash) of firmware on device, which is not turned on? I have read something about twrp flash, but if i am not wrong, device should be switched on before this process. I would like to install new firmwere, to check, if phone has hardware or software defect.
to put it into recovery mode, you need to hold volume up button and power button, once the huawei logo appears, release power button but keep holding volume up, after about 30 - 45 seconds, it will boot into recovery mode. i have had this issue over and over and i've had to discover this method myself after trying all methods i found, you can reach me on [emailĀ protected] in case you need anything else. if it fails to boot into recovery, just remove the battery for a few seconds and insert then try again. i have this very model of phone too.
before brick, it had being prompted for a while to upgrade the system software, I always tab later to postpone it. but yesterday accidentally hit the "upgrade now" then it was bricked after the phone was rebooted.
the screen stayed at the huawei logo and powered by Android at the bottom. I am able to push/hold the power button to power it off, but not able to power it up by any buttons or combination. it will automatically turn on (randomly) and stayed at the huawei logo for ever.
when the phone is on at the Huawei logo, connecting it to PC but either "adb devices -l" or "fastboot devices" shows nothing, no devices.
could anyone please share some light?
Thanks
saltedfish said:
before brick, it had being prompted for a while to upgrade the system software, I always tab later to postpone it. but yesterday accidentally hit the "upgrade now" then it was bricked after the phone was rebooted.
the screen stayed at the huawei logo and powered by Android at the bottom. I am able to push/hold the power button to power it off, but not able to power it up by any buttons or combination. it will automatically turn on (randomly) and stayed at the huawei logo for ever.
when the phone is on at the Huawei logo, connecting it to PC but either "adb devices -l" or "fastboot devices" shows nothing, no devices.
could anyone please share some light?
Thanks
Click to expand...
Click to collapse
Did you ever unlock bootloader? Could you enter fastboot mode? (hold volume - and power button). Or eRecovery (plug usb cable, hold volume + and power, until Huawei logo appear, release power button)?
gazavn said:
Did you ever unlock bootloader? Could you enter fastboot mode? (hold volume - and power button). Or eRecovery (plug usb cable, hold volume + and power, until Huawei logo appear, release power button)?
Click to expand...
Click to collapse
unfortunately, I didn't unlock bootloader, so I can't enter fastboot mode actually. as I mention in the original post, I can only power it off when it's at the Huawei logo, but not able to power it on with any combination, it will randomly power itself on.
You have a corrupted /data partition, happened to me one day, on another huawei device (p9lite). You should, I said should, be able to reboot to huawei e-recovery, using power+volume up, release power after huawei logo shows up. Unfortunately you have to arm yourself with lot of patience and try to use an "unbrick guide" from another device. I'll try to find any info I can for you, but in the mean time you should look as well.
PS:/ I didn't even tried to install anything custom on this mate9, since it;s an expensive phone for me and I cannot afford to brick it up.
Hi all,
The device I have is currently stuck on the Huawei boot screen, and it is unable to turn off as long as the battery has enough charge. Long pressing the power button just reboots the device back to the Huawei screen.
I was able to boot to the erecovery screen, or the HiSuite screen using both Vol+ & power or Vol- & power before. But since last night, I cannot do this anymore. No matter which combination I use, the phone simply reboots to the Huawei screen.
Connecting it to a pc also does not make it listed with either fastboot or adb, so I'm kind of worried that my device is bricked beyond repair.
Do any of you have ideas or advice regarding this situation?
Cheers,
Evert
Connect the cable from your phone to pc , hold the power button and volume down until it show fastboot mode
Hi!
I have a problem with a galaxy a40 device, I flashed a stock ROM with Odin, everything went fine, green lights, PASS and all, but now the device just won't go pass the SM logo anymore. When I turn on, logo appears 2-3 secs I get a warning of the unlocked BL then logo comes back and after a second the phone restarts itself and the same goes on forever ( well about several hours, and after that it just shuts off somehow ). I cannot enter recovery mode or download mode at all. I keep pressing the combinations Power + Vol Down, Power + Vol Up, All three and every combinations I have just found on the internet so far. Odin doesnt recognize the phone, which is not a surprise since it won't start up. I have tried with adb but waiting for device is all I get.
How is it even possible that I cannot enter download mode at all? There was no problem with the physical keys, and the power still works, I cannot test the Vol buttons tho.
Has anyone ever had a problem like this? How can I come back from this? Is there a way to flash a ROM without download mode or turned off phone?
Thanks for any help!!
The download mode for this model is different from previous Samsung's :
IIRC, with the phone off, you need to hold VolumeUp and VolumeDown, then plug in the USB cable connected to a computer (you may need to press Power to power up the phone, I can't recall properly).
From there, you should be able to restore a stock ROM with Odin.
Let us know if it helped !
gmarko247 said:
Hi!
I have a problem with a galaxy a40 device, I flashed a stock ROM with Odin, everything went fine, green lights, PASS and all, but now the device just won't go pass the SM logo anymore. When I turn on, logo appears 2-3 secs I get a warning of the unlocked BL then logo comes back and after a second the phone restarts itself and the same goes on forever ( well about several hours, and after that it just shuts off somehow ). I cannot enter recovery mode or download mode at all. I keep pressing the combinations Power + Vol Down, Power + Vol Up, All three and every combinations I have just found on the internet so far. Odin doesnt recognize the phone, which is not a surprise since it won't start up. I have tried with adb but waiting for device is all I get.
How is it even possible that I cannot enter download mode at all? There was no problem with the physical keys, and the power still works, I cannot test the Vol buttons tho.
Has anyone ever had a problem like this? How can I come back from this? Is there a way to flash a ROM without download mode or turned off phone?
Thanks for any help!!
Click to expand...
Click to collapse
Here the same problem, have a40 in loop and never get rocgnized for computer, tryed many different cables, and installed a booring large amount of drivers software and nothing...
you need to power off device completely. let battery drain if you can't shut down. press and keep holding volume down + plug in usb cable for Odin3 (I doubt both?)
aIecxs said:
you need to power off device completely. let battery drain if you can't shut down. press and keep holding volume down + plug in usb cable for Odin3 (I doubt both?)
Click to expand...
Click to collapse
Generic answers, repeated 800 times why really need to waste a post with that? and that not was the problem:
1- For no usb recognition, is this phone bad design, in the back tap where is the battery in the samsung logo more or less if you push with fingers and charge is because the design of baterry is so crap and your usb port goes off when the under tap cable moves or just get little out of conection. If you can get working after push, usb on phone will do too.