I have problem with flashing LineageOS second time.
I used LineageOS before. And I've decided to flash the updated nightly build. And I do the clean flash, wipe system, and data. Flash ROM, and then flash GApps again. (I knew after that I don't have to clean flash to update my nightly because it will erase your previous google account settings)
After installation I rebooted into the system. In the first setup wizard, At Google account login, it says "checking info..." and then crashed with the message "Google Play services has stopped". I've tried many flashing methods, and also flash ROM without GApps. But it same in the system. I can't add google account and can't open the playstore either. I tried with different build and different GApps packages and it went fail and fail again. Please tell me if you have any ideas so I could run 7.1.1 again. I would appreciated it. Anyway I'm at CloudyG2 3.3 right now and using TWRP blastgator 3.1.0-1.
Thanks.
That's why it's called "nightly".
http://wiki.audacityteam.org/wiki/Nightly_Builds :
Nightly builds are alpha builds from the latest development code. By their nature these builds are likely to contain bugs or might even cause data loss.
Click to expand...
Click to collapse
Sorry to say, but you got to deal with it till the next build shows up.
Related
I'm currently trying to update my phone from CM11 to CM12 using TWRP. In TWRP, I factory reset my phone, then flashed the latest CM12 nightly build. However, when I try to flash gapps, TWRP says that I have a status 7 error and it fails. If I try to run my phone normally, I get errors saying that Google Play Services has stopped, Setup Wizard has stopped, etc. I have no idea where I'm going wrong, how can I fix this?
hruweg said:
I'm currently trying to update my phone from CM11 to CM12 using TWRP. In TWRP, I factory reset my phone, then flashed the latest CM12 nightly build. However, when I try to flash gapps, TWRP says that I have a status 7 error and it fails. If I try to run my phone normally, I get errors saying that Google Play Services has stopped, Setup Wizard has stopped, etc. I have no idea where I'm going wrong, how can I fix this?
Click to expand...
Click to collapse
What gapps package did you download? If it is a larger set of gapps, sometimes there isn't enough space in /system to install everything, so you have to use a more minimal package, and download the additional apps from the Play Store.
Hey guys,
Recently I flashed
ClockWorkMod recovery - v 6.0.1.9
Cyanogenmod 12.1 nightly -cm-12.1-20150706-NIGHTLY-mako.zip
It all worked out (with great difficulty) and the phone works fine.
However, I have no google apps. Coming from stock factory setting to a rom with no google apps is quite difficult.
So, i tried flashing the gapps along with the rom but i keep getting a status 7 error message and the installation gets aborted, the result being when i reboot my phone i get a plethora or error messages of all the google apps which stop working (i.e none of the gapps work).
I have tried flashing the following (file names) gapp zip files with no luck.
gapps-5.1-2015-06-02-15-21
gapps-5.1-2015-07-03-13-41
gapps-L-4-21-15
gapps-lp-20150211-signed
BaNkS-dynamic-gapps-L-6-21-15
pa_gapps-modular-mini-5.1-20150315-signed
Even the gapps link on the cyanogenmod wiki page does not work. ( i think i included that filename in the above list)
On reading other forums, members say that the recovery must be updated.
Quite honestly i am quite apprehensive to do anything to the recovery as i got stuck into a bootloop once and it took me a day to get out of it.
P.S i am a complete amatuer in this process, this is the first custom rom i flashed after staying on stock factory images for 2 years.
I really do need help, as no other rom works well except the cm 12.1 and itwould be absoutely brilliant if i have the google apps too!
Thanks in advance.
solution found
Hey there, I have the s4 (GT-i9505)
I had the same problem until today and I have found the solution to it,
I updated my cm12.1 nightly to 20150706,
Downloaded slim gapps 5.1.x mini latest (20150706), [I searched for it on Google]
Tried flashing the cm and then the gapps but it didn't work, and gave me all the errors of apps that have stopped which was very annoying.
So then I did a little research and figured out that I was using twrp v2.6.0.0 which was quite old , so I never gapps after the root. So then I updated it to the latest version by connecting my phone to the PC in download mode and downloaded the twrp v.2.8.0 (latest) and recovery booted my phone.
Factory reseted my phone, installed both the cm12.1 and gapps by selecting the zip files and then flashing them. Wiped the dalvik cache. Finally rebooted my phone.
And to my surprise it actually worked. Thank god that now I have the play store and all the other apps without any annoying popups.
I'm on my phone so I can't seem to be able to upload any links .
I'm sorry you gotta have to search on Google for the download links.
Have fun buddy. Hope it works on your nexus 4. Enjoy !!
Got it working!!
So, followed some forums ( including mehsan23) and updated my custom recovery. The most surprising thing is that you can do this by downloading zip files of the latest cmw recovery and flash them on to your existing recovery and the recovery automatically updates.
Then flashed the gapps on cm12.1 wiki page and it worked! So relieved! However the Google app crashes but its alright I can do without it.
Thanks guys!!
P.s thanks again mehsan23
Hi,
Yesterday I "blindly" installed the latest CM nightly without noticing that I was installing CM13... After the install, no Google App was working (as expected). When I noticed I had installed CM13, I tried downloading OpenGapps (all from nano to stock for ARM, -not ARM64-), and none of these can be installed, I always get an error (Status Code 1). After a lot of trying, I coundn't even make a wipe (I got an error while formatting data).
After flashing a stock ROM via Odin, the phone worked again, so I tried reinstalling. Now the issue I have is that I can't install any custom ROM to the phone, I have tried flashing CyanogenmodRecovery (for CM12 and CM13) and CWM 6.0.4.7, all of them let me install the latest CM12.2 nightly (26.12), but the phone always hangs on the Cyanogenmod Bootscreen. Wiping is not showing any errors anymore.
Any thoughts? Am I missing something? I am relatively new to the S4, and I got mine already with CM11 on it, and until yesterday I was always able to update without any issues... Am I missing some step?
Small update: I get some errors in the recovery logs: unable to mount /efs. I don't understand why I get this error when a OEM Kitkat works, but well, will keep trying, maybe I find a way to get it working...
1. Use TWRP, CWM is outdated.
2. "Nightly" realeases are testing firmwares. CM13 for GT-i9505 is in early releases too. They have lot of bugs still.
3. - Download the latest stable CM firmware: HERE and copy it to your SDCARD external + Gapps (ARM+ android 5.1 + nano).
- Go to DOWNLOAD MODE and flash TWRP. Boot in TWRP - Select Wipe - Advanced Wipe and wipe all (less usb-otg and external memory).
- Flash CM12.1 firmware and GApps then. Reboot and enjoy.
Use TWRP. Google for s4 twrp. On that page you will also have various install instructions. Afterwards you can flash pretty much any custom rom.
Well, tried exactly these steps, I only skipped gapps for now. I installed following version: cm-12.1-20151117-SNAPSHOT-YOG7DAO1JN-jfltexx. However the phone still hangs while booting... I will let it for a while and see if it boots, but I think it's still stuck... The stock Samsung Kitkat flashes properly from Odin and can be booted... Really strange. Is there anything I can do to see what's going on? I only get the Cyanogenmod Bootscreen, but no adb access...
Well, I am getting some errors: unable to mount /efs... This seems to be the problem, no idea why this is happening... I will keep looking around for a fix... I still don't quite understand why a stock KitKat works...
mschmiedel said:
Hi,
Yesterday I "blindly" installed the latest CM nightly without noticing that I was installing CM13... After the install, no Google App was working (as expected). When I noticed I had installed CM13, I tried downloading OpenGapps (all from nano to stock for ARM, -not ARM64-), and none of these can be installed, I always get an error (Status Code 1). After a lot of trying, I coundn't even make a wipe (I got an error while formatting data).
After flashing a stock ROM via Odin, the phone worked again, so I tried reinstalling. Now the issue I have is that I can't install any custom ROM to the phone, I have tried flashing CyanogenmodRecovery (for CM12 and CM13) and CWM 6.0.4.7, all of them let me install the latest CM12.2 nightly (26.12), but the phone always hangs on the Cyanogenmod Bootscreen. Wiping is not showing any errors anymore.
Any thoughts? Am I missing something? I am relatively new to the S4, and I got mine already with CM11 on it, and until yesterday I was always able to update without any issues... Am I missing some step?
Small update: I get some errors in the recovery logs: unable to mount /efs. I don't understand why I get this error when a OEM Kitkat works, but well, will keep trying, maybe I find a way to get it working...
Click to expand...
Click to collapse
Try dowloading the rom from a thread here on the forum.
You didn't mention what phone model you got so I assume it is a GT-I9505. You can find the official thread in the I9505 original android development section. The maintainer is AntaresOne.
It is the GT-I9505, I now was able to install a stock Kitkat, and it now is allowing me to update via OTA, (first time I got a message that I had a "changed" phone and OTA was disabled). I will let it install this way and see what happens.
Last time I tried with TWRP I was getting the error "unable to mount /efs", but after flashing an ODIN ROM the phone works, I have LTE Data and can place and receive calls, IMEI is there, so I am now confused about what can be wrong.
When this OTA update works, I will try to reflash TWRP via Odin (and not mess around with heimdall anymore), and see if then I can install CM12...
I downloaded the version from the Cyanogenmod site, the latest stable CM12.1 release, so I guess it should be as good as downloading it from an xda thread...
I don't know. It's worth a try.
If you get errors about efs,be careful.The EFS partition contains the most important stuff like your IMEI.There are some backup/restore tools of EFS, you should check them out.Wipe everything,flash cm,then restore EFS backup.
Hey guys! So I just flashed cm13 on my zen5. And I'm having a problem with gapps. I have downloaded the x86, 6.0 pico version of it. The rom flashed fine i suppose. The issue is with gapps. As soon as I started to flash gapps, 3 lines of error came and went immediately. After that once again I tried and it showed it was done. I booted the rom after clearing dalvik and cache.(I'm dumb and I forgot to clear system data and all). So now, as soon as the OS boots, it gives me force close. For every single app. What to do? Please help.
UPDATE: UPDATE: The error was with TWRP it seems. None of the files are flashing through TWRP. Can you give me the latest/stable TWRP link for it? For the time being, I have no google play services whatsoever in my device. The rom is from dgadelha I think. CM13.1 20161205
TWRP 3.0 links
https://www.androidfilehost.com/?w=files&flid=52033
TWRP 2.8.x links
https://drive.google.com/file/d/0BzMGgN-tWY2zQnVucDdIUFlQdHM/view
https://drive.google.com/uc?export=download&id=0B05UM2q8MdJFb0VrV2oxTG5rTzQ
While I was on XOSP I faced the same problem so I had to go to 2.8.x version.
Hi,
I have old Galaxy Note 4, that I tried to update.
I searched and browsed the forums for days and finally I followed this thread, and it got stuck on first reboot after lineageos install.
https://forum.xda-developers.com/t/rom-unofficial-11-lineageos-18-1-tblte-trlte-trlteduos.4067663/
Repeatedly, I wipe everything and tried again, and now stuck in Downloading or Recovery.
ie. I can only power on, get into TWRP (twrp-3.6.1_9) or power on, and get into Downloading.
Not sure if I have 'brick' it. Atm, just would like to have OS on the phone to use.
I have downloaded various version of lineageos and gapps and tried them, but probably not knowing the right file to use and inexperience in this sort of thing gave me no progress.
Hoping for guidance to start again from 'scratch' if still possible.
Any OS / Android version will do. What's latest possible to use on this device?
I can access the internal storage from Windows 10 PC. And I can also 'access' it with Odin v3.14.
Any version OS/gapps, I tried it complains that wrong file to use or invalid format. Maybe, I was using incorrect files? Somehow now, when I tried any gapps, it said it has v7.1 OS?
Extract from DROID INFO REPORT before I stuff it up.
Model: SM-N910G (trltedt)
Baseband Version: N910GDTU1DPF4
RIL Version: Samsung RIL v3.0
Build Number: MMB29M.N910GDTS1DPK2
Build Fingerprint: samsung/trltedt/trlte:6.0.1/MMB29M/N910GDTS1DPK2:user/release-keys
Bootloader: N910GDTS1DPK2
Java VM: ART 2.1.0
OS Version: Marshmallow (6.0.1)
SDK: 23
Thanks.
Resolved - OS part.
I re-downloaded everything and tried again today.
I have successfully installed LineAgeOS 18 now. No Apps yet.
I can't believe everything I downloaded before today were corrupted!
I installed gapps.
Only gapps pico 11 installed 'successfully'. Gapps Nano, mini, etc just won't finish on first reboot. All went back to TWRP recovery after sometime.
"Get google play services" notifications kept popping up.
I can not signin to Google Play. When I click update, error retrieving from server DF-DFERH-01.
I have tried repeating this TWRP - Wipe all, format data, re-install few times and ended up same place. What to do to resolve this pls?
TIA.
@dcungoz nowhere read anything about "Format Data" which often helps when having problems with Gapps.
Btw. I prefer BitGapps to Opengapps.
Did you try these as well.
bmwdroid said:
@dcungoz nowhere read anything about "Format Data" which often helps when having problems with Gapps.
Btw. I prefer BitGapps to Opengapps.
Did you try these as well.
Click to expand...
Click to collapse
I did try "Format Data", no success.
Your info about BitGapps helps a lot! I downloaded it.
It works! Thank you