Database Users

[Q] LG G2 AT&T Hotspot

How can we Enable the Hotpot Feature on ATT G2 or is there any other apps that could do the trick?! anyone!!!!!!

there have been a few "claims" nothing as of yet, not build.prop not database editing....

There is a ROM in the ATT area with enabled wifi tether.

HelloWorld11 said:
How can we Enable the Hotpot Feature on ATT G2 or is there any other apps that could do the trick?! anyone!!!!!!
Click to expand...
Click to collapse
This has bee solved already..You must follow the instructions to the T the location is going to be different though...
http://forum.xda-developers.com/showthread.php?t=2478228
---------- Post added at 07:09 PM ---------- Previous post was at 07:05 PM ----------
eldedo said:
there have been a few "claims" nothing as of yet, not build.prop not database editing....
Click to expand...
Click to collapse
Im on ATT LG G2 and my hotspot is enabled,,,,
http://forum.xda-developers.com/showthread.php?t=2478228

Tested and working!
1. Download SQLite Editor
2. Open the file - /data/data/com.android.providers.settings/databases/settings.db
3. There's a field named 'tether_entitlement_check_state'. Original value is set to 5. Changed it to 0 and save
4. Reboot the phone
5. Enjoy tethering.

Dinster said:
1. Download SQLite Editor
2. Open the file - /data/data/com.android.providers.settings/databases/settings.db
3. There's a field named 'tether_entitlement_check_state'. Original value is set to 5. Changed it to 0 and save
4. Reboot the phone
5. Enjoy tethering.
Click to expand...
Click to collapse
I cant find the field name 'tether_entitlement_check_state'. is there a way to create it?

found MSL code for 306sh

first thanks tewilove test it for everyone and maximka18 give file it for us
1. do it with adb file
2. rename file 306sh_RUIM.txt to 306sh_RUIM
3. open terminal
adb push 306sh_RUIM /data/local/tmp
adb shell chmod 755 /data/local/tmp/306sh_RUIM
adb shell /data/local/tmp/306sh_RUIM
Then cmd shows MSL & reboot.
i realy scare when my device show a red square, but it will boot normaly, and we have a code MSL for this device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]

So you just copied existing information from another thread to make a new thread?
http://forum.xda-developers.com/aqu...ock-thread-t3008141/post58319443#post58319443

etirkca said:
So you just copied existing information from another thread to make a new thread?
http://forum.xda-developers.com/aqu...ock-thread-t3008141/post58319443#post58319443
Click to expand...
Click to collapse
i test it in my device from instruction tewilove, and write a new thread for everyone can see it, not coppy, just test it for people, im so sad when you said me just copied

whynot4444 said:
i test it in my device from instruction tewilove, and write a new thread for everyone can see it, not coppy, just test it for people, im so sad when you said me just copied
Click to expand...
Click to collapse
Can any expert to list down the whole process of unlock? I have been searching for solution for few months..

Boonwei said:
Can any expert to list down the whole process of unlock? I have been searching for solution for few months..
Click to expand...
Click to collapse
i wrote instruction at first comment, but it just found MSL, not unlock GSM

whynot4444 said:
i wrote instruction at first comment, but it just found MSL, not unlock GSM
Click to expand...
Click to collapse
But it unlocks for use with other CDMA right?
---------- Post added at 09:35 PM ---------- Previous post was at 09:19 PM ----------
whynot4444 said:
i wrote instruction at first comment, but it just found MSL, not unlock GSM
Click to expand...
Click to collapse
whynot4444 said:
first thanks tewilove test it for everyone and maximka18 give file it for us
1. do it with adb file
2. rename file 306sh_RUIM.txt to 306sh_RUIM
3. open terminal
Click to expand...
Click to collapse
1. where is adb file?
2. I can't rename the file as it shows as a txt file but renaming doesn't even show the extension.
3. what terminal?
I have never had Android before so I don't know all this

NemesisMB said:
But it unlocks for use with other CDMA right?
---------- Post added at 09:35 PM ---------- Previous post was at 09:19 PM ----------
1. where is adb file?
2. I can't rename the file as it shows as a txt file but renaming doesn't even show the extension.
3. what terminal?
I have never had Android before so I don't know all this
Click to expand...
Click to collapse
adb file you can download it on internet
when you rename, just erase .txt, then follow instruction
just cmd on PC

whynot4444 said:
adb file you can download it on internet
when you rename, just erase .txt, then follow instruction
just cmd on PC
Click to expand...
Click to collapse
adb file you can download it on internet
when you rename, just erase .txt, then follow instruction
just cmd on PC
Click to expand...
Click to collapse
There is no ".txt" in the file name of 306sh_RUIM.txt. I mean it is showing as file type text but the name is Just "306sh_RUIM".
EDIT: OKAY I RENAMED USING CMD

NemesisMB said:
There is no ".txt" in the file name of 306sh_RUIM.txt. I mean it is showing as file type text but the name is Just "306sh_RUIM".
EDIT: OKAY I RENAMED USING CMD
Click to expand...
Click to collapse
Hi , am new to this,
I have moved the .apk file to mobile and renamed the file 306sh_RUIM.txt,
Can you please tell me the next step to proceed further.

NemesisMB said:
There is no ".txt" in the file name of 306sh_RUIM.txt. I mean it is showing as file type text but the name is Just "306sh_RUIM".
EDIT: OKAY I RENAMED USING CMD
Click to expand...
Click to collapse
go to control panel, choose folder option, choose show hiden file, then 306sh_RUIM will show 306sh_RUIM

Kumar281 said:
Hi , am new to this,
I have moved the .apk file to mobile and renamed the file 306sh_RUIM.txt,
Can you please tell me the next step to proceed further.
Click to expand...
Click to collapse
OK I did it.
First download the adb tools. You also need to download the Sharp Crystal USB adb driver and install on your PC. Activate USB Debugging on your phone settings. If you cannot find it then go to Settings and About Phone and activate developer options. Connect to PC via USB and Allow USB Debugging when asked on your phone.
I moved the 306sh_RUIM file to the adb folder. Then press SHIFT+RIGHT CLICK and click 'Open Command Prompt Here".
Thereafter you have to follow all the commands as mentioned above. Just type in command prompt one by one. I'm sharing my Screenshot as well.
I did it via teamviewer because my dad is using the phone in India. He is getting the Reliance Network but not able to make a call probably because the SIM is not not activated by Reliance yet.

NemesisMB said:
OK I did it.
First download the adb tools. You also need to download the Sharp Crystal USB adb driver and install on your PC. Activate USB Debugging on your phone settings. If you cannot find it then go to Settings and About Phone and activate developer options. Connect to PC via USB and Allow USB Debugging when asked on your phone.
I moved the 306sh_RUIM file to the adb folder. Then press SHIFT+RIGHT CLICK and click 'Open Command Prompt Here".
Thereafter you have to follow all the commands as mentioned above. Just type in command prompt one by one. I'm sharing my Screenshot as well.
I did it via teamviewer because my dad is using the phone in India. He is getting the Reliance Network but not able to make a call probably because the SIM is not not activated by Reliance yet.
Click to expand...
Click to collapse
Thanks for your reply will check today and share my feedback.

Thanks. All
I successfully unlocked the SIM card and able to use a cdma SIM in India.
Checked data network. It works fine.
Checked tethering also. It works fine.
Sent from my 306SH using XDA Free mobile app

Sharp aquos
NemesisMB said:
But it unlocks for use with other CDMA right?
---------- Post added at 09:35 PM ---------- Previous post was at 09:19 PM ----------
1. where is adb file?
2. I can't rename the file as it shows as a txt file but renaming doesn't even show the extension.
3. what terminal?
I have never had Android before so I don't know all this
Click to expand...
Click to collapse
Dear
Can u help me program my sharp aquos for reliance.
if anything chargeable i will pay.
---------- Post added at 07:23 PM ---------- Previous post was at 07:15 PM ----------
Kumar281 said:
Thanks. All
I successfully unlocked the SIM card and able to use a cdma SIM in India.
Checked data network. It works fine.
Checked tethering also. It works fine.
Sent from my 306SH using XDA Free mobile app
Click to expand...
Click to collapse
Hi Dear
Can U help to do it for me i will pay the charges.
thanks
girish
9372299999
9404001234
[email protected]

NemesisMB said:
OK I did it.
First download the adb tools. You also need to download the Sharp Crystal USB adb driver and install on your PC. Activate USB Debugging on your phone settings. If you cannot find it then go to Settings and About Phone and activate developer options. Connect to PC via USB and Allow USB Debugging when asked on your phone.
I moved the 306sh_RUIM file to the adb folder. Then press SHIFT+RIGHT CLICK and click 'Open Command Prompt Here".
Thereafter you have to follow all the commands as mentioned above. Just type in command prompt one by one. I'm sharing my Screenshot as well.
I did it via teamviewer because my dad is using the phone in India. He is getting the Reliance Network but not able to make a call probably because the SIM is not not activated by Reliance yet.
Click to expand...
Click to collapse
Hello..
So, I follow your instructions and I got my MSL code, but how do I enter it on the phone? I'm not in USA. A friend bought for me a Sprint prepaid version.
Thanks in advance for the help.

whynot4444 said:
first thanks tewilove test it for everyone and maximka18 give file it for us
1. do it with adb file
2. rename file 306sh_RUIM.txt to 306sh_RUIM
3. open terminal
adb push 306sh_RUIM /data/local/tmp
adb shell chmod 755 /data/local/tmp/306sh_RUIM
adb shell /data/local/tmp/306sh_RUIM
Then cmd shows MSL & reboot.
i realy scare when my device show a red square, but it will boot normaly, and we have a code MSL for this device
[/URL][/IMG]
Click to expand...
Click to collapse
hey why after unlock there is no option GSM/UMTS in network
what i seen from ting after UICC Unlock there in Network Mode will have option for GSM/UMTS and if we select it the phone will restart..

loonbg said:
hey why after unlock there is no option GSM/UMTS in network
what i seen from ting after UICC Unlock there in Network Mode will have option for GSM/UMTS and if we select it the phone will restart..
Click to expand...
Click to collapse
no, it just unlock CDMA, not GSM, i ask sprint and it said the repaid phone can use any where except USA

lccnsk said:
Dear
Can u help me program my sharp aquos for reliance.
if anything chargeable i will pay.
---------- Post added at 07:23 PM ---------- Previous post was at 07:15 PM ----------
Hi Dear
Can U help to do it for me i will pay the charges.
thanks
girish
9372299999
9404001234
[email protected]
Click to expand...
Click to collapse
there are no charges. Just download the files from the first post of this thread, google and download adb file and follow above instructions.
---------- Post added at 12:24 PM ---------- Previous post was at 12:20 PM ----------
wllaw said:
Hello..
So, I follow your instructions and I got my MSL code, but how do I enter it on the phone? I'm not in USA. A friend bought for me a Sprint prepaid version.
Thanks in advance for the help.
Click to expand...
Click to collapse
No need to enter it anywhere. Your phone should reboot automatically and you should be able to use any cdma SIM provided it is on the same band that this phone uses.

Sharp Aqous PROGRAMMING
NemesisMB said:
there are no charges. Just download the files from the first post of this thread, google and download adb file and follow above instructions.
---------- Post added at 12:24 PM ---------- Previous post was at 12:20 PM ----------
No need to enter it anywhere. Your phone should reboot automatically and you should be able to use any cdma SIM provided it is on the same band that this phone uses.
Click to expand...
Click to collapse
Dear Sir,
i am not so technical can u help me to do it thru team viewer.
i have sprint sharp aqous prepaid, no range lines are there in phone.
kindly help.
thanks in advance
GIRISH
9372299999
---------- Post added at 10:16 AM ---------- Previous post was at 09:53 AM ----------
Dear sir
pls help to program i am new to this
thanks
girish
9372299999

NemesisMB said:
No need to enter it anywhere. Your phone should reboot automatically and you should be able to use any cdma SIM provided it is on the same band that this phone uses.
Click to expand...
Click to collapse
After it reboot, it will try to "Configuring your device for voice and data", but it always failed. So, now I'm stuck with voice and text only. Can't use data. Did you put the SIM card during the unlocking process?

[ROOT/Guide] Native Hotspot Working

Hi after a few days of tinkering with the native hotspot to work, i finally got it working. Im going to try to make it as easy as possible to follow the guide in aiding to get it to work for you.
I'm also going to try to create a automatic script to do it when I get some time.
My device:
Unlocked Pixel XL
Network: Sprint (Should theoretically work for all.)
Requirments:
Hackers Keyboard (From play store)
https://play.google.com/store/apps/details?id=org.pocketworkstation.pckeyboard&hl=en
Termux (From play store)
https://play.google.com/store/apps/details?id=com.termux
Unlocked Bootloader
ElementX Kernel
Forum: [url]http://forum.xda-developers.com/pixel-xl/development/kernel-elementalx-pxl-0-02-t3487072[/URL]
Chainfire's Root method
Forum: [url]http://forum.xda-developers.com/pixel-xl/development/root-supersu-t3490156[/URL]
Steps:
Make sure you are rooted and have the ElementX kernel installed
Install Termux [From Playstore]
Install Hackers keyboard [From Playstore]
Open up termux
Type in su
Press Enter
Grant SuperSU access
Type mount -o rw,remount /system_root
Press Enter
Type in
cd /system_root/system/
Press Enter
apt-get install nano
Press Enter
This is a symlink binding to the directory that will allow us to modify build.prop
Nano is an editing application that's intuitive and easy to use.
Type in
settings put global tether_dun_required 0
Press Enter
Then type in
nano build.prop
Scroll all the way down to the end of the line, and add the following
net.tethering.noprovisioning=true
Using the hackers keyboard layout in landscape view press ctrl + x then press Y then Enter
Reboot your device and start the tethering, it should be able to turn on a hotspot with no errors. I may or may not work for all, but it did work for me so hopefully those out there that needed this will be able to benefit as well.
All screenshots
https://drive.google.com/open?id=0B94c0AYYx44RTENkcm0wLU5MbEE

RESERVED

Why use nano? You can just do "echo net.tethering.noprovisioning=true >> /system/build.prop" and not have to worry about special keyboards or apt-get installing anything.

josephcsible said:
Why use nano? You can just do "echo net.tethering.noprovisioning=true >> /system/build.prop" and not have to worry about special keyboards or apt-get installing anything.
Click to expand...
Click to collapse
That work's too I forgot about that
But it needs to be
echo net.tethering.noprovisioning=true >> /system_root/system/build.prop
Since current root is systemless and the partition layout won't let you just touch the system directory without the symlink

This does not work on Verizon's network running Elemental X and build NDE63P

Not looking to thread crap, but just wanted to share my experience and get opinions:
I rooted previously using Chainfire's method. Granted root access to ROOT EXPLORER app----purchased several years ago.
Went into the system folder and opened the build.prop file.
Added the last line: net.tethering.noprovisioning=true and saved and rebooted.
This took a total of 2-3 minutes. I know not everyone wants to spend money, but for those that already purchaed ROOT EXPLORER, was my method OK?

Let me see if this is right so basically open root explorer then open system_root directory then system directory then open and edit build prop and put that line into the build prop net.tethering.noprovisioning=true >> ? So just that including the arrows?

psychatog64 said:
Let me see if this is right so basically open root explorer then open system_root directory then system directory then open and edit build prop and put that line into the build prop net.tethering.noprovisioning=true >> ? So just that including the arrows?
Click to expand...
Click to collapse
Almost.....
I went in to the system directory and opened and edited the build.prop file
I only added the following line, with no extra arrows.
net.tethering.noprovisioning=true
I saved and rebooted and native tethering works.
Root Explorer will save your original build.prop file as a backup.
Just for kicks....I switched back to my original build.prop file to check results.
As expected, tethering failed. When I re-edited the file and added net.tethering.noprovisioning=true
it was working again. Good Luck.

diesteldorf said:
Almost.....
I went in to the system directory and opened and edited the build.prop file
I only added the following line, with no extra arrows.
net.tethering.noprovisioning=true
I saved and rebooted and native tethering works.
Root Explorer will save your original build.prop file as a backup.
Just for kicks....I switched back to my original build.prop file to check results.
As expected, tethering failed. When I re-edited the file and added net.tethering.noprovisioning=true
it was working again. Good Luck.
Click to expand...
Click to collapse
Now this makes what work exactly the wifi hotspot under setting cause I didn't do this yet and I just clicked it and it turned on so idk what this does exactly
---------- Post added at 02:14 AM ---------- Previous post was at 02:13 AM ----------
psychatog64 said:
Now this makes what work exactly the wifi hotspot under setting cause I didn't do this yet and I just clicked it and it turned on so idk what this does exactly
Click to expand...
Click to collapse
Or is this meant for like Bluetooth tethering and USB tethering

psychatog64 said:
Now this makes what work exactly the wifi hotspot under setting cause I didn't do this yet and I just clicked it and it turned on so idk what this does exactly
---------- Post added at 02:14 AM ---------- Previous post was at 02:13 AM ----------
Or is this meant for like Bluetooth tethering and USB tethering
Click to expand...
Click to collapse
editing the build.prop and adding net.tethering.noprovisioning=true allows you to turn on the PORTABLE Wi-Fi hotspot from within the settings menu.
Certain carriers disable tethering my default, depending on your plan.
If you are already able to turn it on without making any changes, it's possible your carrier and/or plan already allows tethering by default.

diesteldorf said:
editing the build.prop and adding net.tethering.noprovisioning=true allows you to turn on the PORTABLE Wi-Fi hotspot from within the settings menu.
Certain carriers disable tethering my default, depending on your plan.
If you are already able to turn it on without making any changes, it's possible your carrier and/or plan already allows tethering by default.
Click to expand...
Click to collapse
Interesting I have the Verizon old xl plan the 12 GB with 12 GB bonus data for life

psychatog64 said:
Interesting I have the Verizon old xl plan the 12 GB with 12 GB bonus data for life
Click to expand...
Click to collapse
You don't have an unlimited data plan and Verizon allows tethering by default. That's why you don't have to make any build.prop changes to enable hotspot.
If you were on a legacy Unlimited plan, Verizon and others will have hotspot blocked, unless you pay extra or bypass the block by editing the build.prop

harritaco said:
This does not work on Verizon's network running Elemental X and build NDE63P
Click to expand...
Click to collapse
The bootloader is unlocked and you have the latest chainfire root correct?

diesteldorf said:
You don't have an unlimited data plan and Verizon allows tethering by default. That's why you don't have to make any build.prop changes to enable hotspot.
If you were on a legacy Unlimited plan, Verizon and others will have hotspot blocked, unless you pay extra or bypass the block by editing the build.prop
Click to expand...
Click to collapse
It shouldn't matter about the plan, the additional lines should bypass it. Can you send me a logcat and your build.prop

stuntnmore said:
It shouldn't matter about the plan, the additional lines should bypass it. Can you send me a logcat and your build.prop
Click to expand...
Click to collapse
His point is that with Verizon hotspot works out of the box on all plans except unlimited data plans
If you have a Verizon Unlimited data plan just add
Code:
net.tethering.noprovisioning=true
to the build.prop and reboot
---------- Post added at 07:40 AM ---------- Previous post was at 07:37 AM ----------
The custom kernel, terminal, and custom keyboard are not needed with Verizon

sd_shadow said:
His point is that with Verizon hotspot works out of the box on all plans except unlimited data plans
If you have a Verizon Unlimited data plan just add
to the build.prop and reboot
---------- Post added at 07:40 AM ---------- Previous post was at 07:37 AM ----------
The custom kernel, terminal, and custom keyboard are not needed with Verizon
Click to expand...
Click to collapse
Also this
settings put global tether_dun_required 0
That'll need to be put into termux that's how it worked for me. I tried both the unlocked and Verizon version. And yeah your right about the Verizon part of it.

stuntnmore said:
Also this
settings put global tether_dun_required 0
That'll need to be put into termux that's how it worked for me. I tried both the unlocked and Verizon version. And yeah your right about the Verizon part of it.
Click to expand...
Click to collapse
I'm on Verizon unlimited all I did was edit the build.prop
Sent from my XT1254 using XDA Labs

sd_shadow said:
I'm on Verizon unlimited all I did was edit the build.prop
Click to expand...
Click to collapse
Oh that's great to hear glad it works for you

No need for all of this. I just verified that the following works:
1. Install Network Signal Refresher Lite from the Playstore
2. Open both Network Signal Refresher and the Mobile Hotspot in split screen.
3. Hit the Refresh button in Network Signal Refresher and the quickly turn on Mobile Hotspot.
4. Profit!
Hope this helps.

335Deezl said:
No need for all of this. I just verified that the following works:
1. Install Network Signal Refresher Lite from the Playstore
2. Open both Network Signal Refresher and the Mobile Hotspot in split screen.
3. Hit the Refresh button in Network Signal Refresher and the quickly turn on Mobile Hotspot.
4. Profit!
Hope this helps.
Click to expand...
Click to collapse
It's a need for those who wish for it to work all the time via toggle not to use an app every time, it's a lot more efficient.

Mobile Hotspot/Tethering Unlock

Hello
I am coming to the g4 plus after having used the samesung s5 for years on MOAR rom and i am looking for how i can get my mobile hotspot back on sprint
I get Unable to connect to data network you may not be subscribed to .....
now i do not have a wifi plan per se but i do have a really old phone as a modem plan i am still paying for (back then it was 10$ a month for unlimited 2008)
so first thing i did was look for where to modify the apn settings for tethering like i had to do before but when the phone activates on sprint the apn menu disapears.
so i look for a custom rom like MOAR but for the g4 plus and i am not seeing any that say they have wifi hacks included

I did this successfully on the nougat soak, but requires root access. Add this line at the end of your build.prop (I used Root Explorer to edit the file):
net.tethering.noprovisioning=true
Save build.prop and reboot phone. Then, in the terminal emulator app, issue the following commands one at a time:
su
settings put global tether_dun_required 0
exit
Reboot phone again.
---------- Post added at 04:39 PM ---------- Previous post was at 04:30 PM ----------
You might want to try it after the build.prop edit to see if it works, the terminal emulator commands may not be necessary.

i just use airdroid for hotspot

I will take a look at airdroid tomorow if it works great if not ill have to dig into the build.prop was trying to avoid that with a ready made rom
this brings back memories of reg'editing my htc titan lol

shkrmkr said:
I did this successfully on the nougat soak, but requires root access. Add this line at the end of your build.prop (I used Root Explorer to edit the file):
net.tethering.noprovisioning=true
Save build.prop and reboot phone. Then, in the terminal emulator app, issue the following commands one at a time:
su
settings put global tether_dun_required 0
exit
Reboot phone again.
---------- Post added at 04:39 PM ---------- Previous post was at 04:30 PM ----------
You might want to try it after the build.prop edit to see if it works, the terminal emulator commands may not be necessary.
Click to expand...
Click to collapse
This totally worked on my 1625, tethering was ghosted out. After this it works. Thank you
Sent from my Moto G4 using Tapatalk

robot_head said:
This totally worked on my 1625, tethering was ghosted out. After this it works. Thank you
Sent from my Moto G4 using Tapatalk
Click to expand...
Click to collapse
You used both or only the build.prop edit. I can add it to source in that case. And is this issue only with 1625 variant?

The compliance with the provider setting is well known for Moto phones (at least the ones sold in US). I am using an app from here on XDA called Entitlement Bypass:
https://forum.xda-developers.com/moto-x/themes-apps/app-hotspot-entitlement-bypass-v1-1-5-9-t2705152

This works perfect. I used the build.prop edit and su command. Completely opened tethering.

shkrmkr said:
I did this successfully on the nougat soak, but requires root access. Add this line at the end of your build.prop (I used Root Explorer to edit the file):
net.tethering.noprovisioning=true
Save build.prop and reboot phone. Then, in the terminal emulator app, issue the following commands one at a time:
su
settings put global tether_dun_required 0
exit
Reboot phone again.
---------- Post added at 04:39 PM ---------- Previous post was at 04:30 PM ----------
You might want to try it after the build.prop edit to see if it works, the terminal emulator commands may not be necessary.
Click to expand...
Click to collapse
This worked for my XT1644. Tethering and hospot option was grayed out in settings on custom ROMs, until doing this build prop edit. I did not have to run the commands, build prop edit solved my issue. Thank you so much.

When I rooted first time,I faced this problem of hotspot. I then installed elementalx in my device which solved the problem.

shkrmkr said:
I did this successfully on the nougat soak, but requires root access. Add this line at the end of your build.prop (I used Root Explorer to edit the file):
net.tethering.noprovisioning=true
Save build.prop and reboot phone. Then, in the terminal emulator app, issue the following commands one at a time:
su
settings put global tether_dun_required 0
exit
Reboot phone again.
---------- Post added at 04:39 PM ---------- Previous post was at 04:30 PM ----------
You might want to try it after the build.prop edit to see if it works, the terminal emulator commands may not be necessary.
Click to expand...
Click to collapse
This does work on Motorola G5 plus unlocked from best bye bye using ATnT.

Unrooted XT1644. AT&T provider. Tethering & portable hotspot option is accessible, but when I click on it I encounter "account not set up for tethering...." Could I access the build prop edit via an ADB command or script?
EDIT: Nevermind. My phone's bootloader is locked so no ADB access possible anyway. Looks like I'll need to look into 3rd-party WiFi tethering apps (such as PdaNet+ or NetShare) non-root solutions.

Can we change the BOOT LOGO of OnePlus 5?

I want to change the bootlogo (NOT BOOT ANIMATION).
I couldn't find the logo.bin anywhere. But there are few pngs in /system/media/images about charging.
If anybody come up with a solution for this, please let me know.
Thanks

Yes you can use this tool：http://www.daxiaamu.com/3605，use menu 8,then menu i，and drag png 1080p into it

Error:404 said:
I want to change the bootlogo (NOT BOOT ANIMATION).
I couldn't find the logo.bin anywhere. But there are few pngs in /system/media/images about charging.
If anybody come up with a solution for this, please let me know.
Thanks
Click to expand...
Click to collapse
This is the method I've been using, pretty straight forward.
https://forum.xda-developers.com/oneplus-5/themes/mod-splashinjector-t3650374
---------- Post added at 12:34 AM ---------- Previous post was at 12:33 AM ----------
https://forum.xda-developers.com/oneplus-5/themes/mod-splashinjector-t3650374

Piplup702 said:
This is the method I've been using, pretty straight forward.
https://forum.xda-developers.com/oneplus-5/themes/mod-splashinjector-t3650374
---------- Post added at 12:34 AM ---------- Previous post was at 12:33 AM ----------
https://forum.xda-developers.com/oneplus-5/themes/mod-splashinjector-t3650374
Click to expand...
Click to collapse
Hi!
Thanks mate. Can you assist me through the entire process?
I'm using Windows. Tell me what do I need to download and can't I do this in Android terminal?

Error:404 said:
Hi!
Thanks mate. Can you assist me through the entire process?
I'm using Windows. Tell me what do I need to download and can't I do this in Android terminal?
Click to expand...
Click to collapse
Since you're using Windows (like me) it's a little different than what it says in the link. You have to download and install Git bash. https://github.com/ethanbanker2428/SplashInjector/blob/1.5/README.md
Go to above link and read instructions (that page has a link for Git) Go to install directory, which should be C:/ProgramFiles/Git and run Git bash. That link will tell you how to install the Splash Injector tool once you install Git. Pretty straight forward after that but feel free to ask questions if you get stuck anywhere

Piplup702 said:
Since you're using Windows (like me) it's a little different than what it says in the link. You have to download and install Git bash. https://github.com/ethanbanker2428/SplashInjector/blob/1.5/README.md
Go to above link and read instructions (that page has a link for Git) Go to install directory, which should be C:/ProgramFiles/Git and run Git bash. That link will tell you how to install the Splash Injector tool once you install Git. Pretty straight forward after that but feel free to ask questions if you get stuck anywhere
Click to expand...
Click to collapse
I'm wondering if I can do this all in the Android shell itself?
Because my Windows has permission issues, I f***d it up real bad lol. I can't run git shell.
It is analogous to say I don't have a PC...

Error:404 said:
I'm wondering if I can do this all in the Android shell itself?
Because my Windows has permission issues, I f***d it up real bad lol. I can't run git shell.
It is analogous to say I don't have a PC...
Click to expand...
Click to collapse
Not really sure if that's possible.
Use a root browser and go to Dev/block/platform/soc/1da4000.ufshc/by-name and you will see a file named LOGO that is your logo.bin file. Copy and paste somewhere else. From there I have no idea lol Though I will do some research in the AM to see if it is at all possible

Piplup702 said:
Not really sure if that's possible.
Use a root browser and go to Dev/block/platform/soc/1da4000.ufshc/by-name and you will see a file named LOGO that is your logo.bin file. Copy and paste somewhere else. From there I have no idea lol Though I will do some research in the AM to see if it is at all possible
Click to expand...
Click to collapse
Lol okay!