Related
Hi, I have a essential phone running Oreo 8.1, just recently I have rooted the phone with magisk v16 an twrp 3.2.1, I successfully flashed it with twrp but after the flash whenever I want to get into twrp it just freezes up on the mount data screen and I have to force reboot it, does anyone know a solution to this problem
Make sure you're following the exact steps from this post. Every step is crucial (except #3, because you have to disable your screen lock before booting twrp.
You shouldn't have to manually mount anything in TWRP either. The magisk installer might give you an error about mounting system but it doesn't seem to make any difference.
[QRCODE][/QRCODE]
yellk20 said:
Hi, I have a essential phone running Oreo 8.1, just recently I have rooted the phone with magisk v16 an twrp 3.2.1, I successfully flashed it with twrp but after the flash whenever I want to get into twrp it just freezes up on the mount data screen and I have to force reboot it, does anyone know a solution to this problem
Click to expand...
Click to collapse
You cannot have TWRP installed with 8.x.
TWRP is not compatible.
You must flash the original boot image, then install magisk.
TWRP cannot remain.
You will boot loop.
Please read the instructions on rooting carefully.
Ok thank you
Why can't TWRP replace recovery instead of boot?
RawSlugs said:
Why can't TWRP replace recovery instead of boot?
Click to expand...
Click to collapse
No one has created a bit image with TWRP as the recovery.
Sent from my PH-1 using XDA Labs
RawSlugs said:
Why can't TWRP replace recovery instead of boot?
Click to expand...
Click to collapse
Because the partition layout of the Essential does not have a recovery partition.
Recovery is contained in the boot image.
So to have TWRP resident/permanent, the boot image must be patched.
It has been done for 7.x, but sense 8.x is still beta, there is no official TWRP for Oreo.
Once Oreo is final, I expect we will get a TWRP that works.
The current limitation, means you can't flash without a computer handy.
A GUIDE TO FLASH LATEST TREBLE ROMS, OLDER TREBLE ROMS OR NON-TREBLE ROMS ROMS
UPDATE: A guide to rename our /factory partition as /vendor so that you can flash OLDER Android Oreo treble builds! We do not need this guide on Android Pie custom ROMs or for Stock ZUI WE ONLY NEED THIS FOR ANDROID OREO TREBLE BUILDS REQUIRING /factory renamed as /vendor
for Lenovo Zuk Z2 PRO
Latest Treble : /factory renamed i.e switched to /vendor
Older Treble:/factory mounted as /vendor
Non-Treble: Nothing to do with Vendor, Factory stuff lol
INTRO
As you all know that we now have TREBLE, and Zuk-devs are working hard to improve it further so that when the time comes we can move to GSI builds of future Android versions.
Recently, Zuk-devs have renamed the /factory partition into /vendor partition previously we were mounting /factory as /vendor but now it has been converted(renamed) to /vendor partition with this you'll be able to use a Proper Magisk zip, and you don't need a modded/edited Magisk, etc and lotta other kinds of stuff that we will discuss and come to know in the future.
rootdir: fstab: Use the right label for our vendor partition.
TUTORIAL:
What you want to do:
** Flash OLD TREBLE ROMS /factory is renamed to /vendor - NOTE NOT NEEDED FOR NEWER ROMS! **
Instructions:
* Flash "Factory2Vendor_plus.zip",
*Flash belowTWRP,
*Reboot To TWRP,
*Flash ROM,
+ GApps / + Magisk etc
* Reboot.
*Enjoy :fingers-crossed:
Downloads:
Factory2Vendor_pro: https://androidfilehost.com/?fid=746010030569969371
TWRP for /factory renamed as /vendor roms https://github.com/cosmedd/android_...eases/download/20180413/20180413_recovery.img
** REVERTING BACK to NORMAL aka renaming /vendor back to/factory **
Instructions:
*Flash "Vendor 2Factory_plus.zip",
*Flash OFFICIALTWRP,
*Reboot TWRP,
*Flash ROM,
+ GApps / + Magisk etc
*Reboot.
*Enjoy :fingers-crossed:
Downloads:
Vendor2Factory_pro: https://androidfilehost.com/?fid=673956719939835215
https://twrp.me/zuk/zukz2row.html
** REVERTING BACK to NORMAL aka renaming /vendor back to/factory **
Instructions:
*Flash ROM,
+ GApps / + Magisk etc
*Reboot.
*Enjoy :fingers-crossed:
Notes:
This 'New TWRP' will work for both Latest Treble and Non-Treble RoMs
For ZUI also no need to flash any patch, New TWRP shall work (Needs to be tested)
You can flash Non Treble RoMs and Nougat Builds or other builds with the new TWRP and no patches need to be flashed
Once you flash "factory2vendor" or "vendor2factory" you do not need to flash again unless mentioned in the build
or if you want to revert back to Old Treble RoMs where /factory was mounted as /vendor
CREDITS
Zuk-devs - Davidevinavil, DD3Boh and Cosmedd (https://github.com/zuk-devs)
@Fedor917 for giving the idea
And all others who have contributed in any manner! :highfive:
Reserved
You'll be able to use above method for Latest AEX coming soon by Davidevinavil and all the ROMs compiled using the latest sources as per by Zuk-devs
Links added, enjoy
thx
Can we make this procedure opposite? i.e. flash first twrp and than that zip? I normally flash twrp with official twrp app
1 or 2 should I do if I want to flash from the latest zui to AEX5.4 ,thx
thanks
Thanks zuk developer
I just tryed to flash Vendor 2Factory_pro..zip but I get following error "failed to mount '/vendor' (invalid argument)". I was in previous version 5.4 (1104). After restart, it does not load the rom but the bootloader. problem is the devices is not recognized under "adb devices" when in bootloader. Any ideas will be very welcome
darquesp said:
I just tryed to flash Vendor 2Factory_pro..zip but I get following error "failed to mount '/vendor' (invalid argument)". I was in previous version 5.4 (1104). After restart, it does not load the rom but the bootloader. problem is the devices is not recognized under "adb devices" when in bootloader. Any ideas will be very welcome
Click to expand...
Click to collapse
In bootloader (fastboot) you must use
fastboot -i 0x2b4c
ADB works in twrp or with system . Just follow this guide .
mar.ur said:
In bootloader (fastboot) you must use
fastboot -i 0x2b4c
ADB works in twrp or with system . Just follow this guide .
Click to expand...
Click to collapse
I installed the vendor, but the twrp is only black.
Any solution?
JustBr said:
I installed the vendor, but the twrp is only black.
Any solution?
Click to expand...
Click to collapse
Did you install latest twrp after flashing f2v
mar.ur said:
In bootloader (fastboot) you must use
fastboot -i 0x2b4c
ADB works in twrp or with system . Just follow this guide .
Click to expand...
Click to collapse
Thanks. I flashed last rom and after that updated twrp with twrp app and now I get no error about partitions.
I thought that to flash a twrp image with adb, I should do into fastboot mode. Can I also do it into recovery or system just with command : fastboot -i 0x2b4c flash recovery twrp.img?
Which guide do you mean? I checked on this thread and could not find a guide about adb.
Many thanks!
You can install twrp.img in any twrp .Just go to install/ install image and choose new twrp.img , then mark recovery and flash it .
mar.ur said:
Did you install latest twrp after flashing f2v
Click to expand...
Click to collapse
my twrp and 3.1, downloaded a recovered image(new twrp ), select image, recover and flash .. and the screen continues black, do not start twrp ... !!!!
JustBr said:
my twrp and 3.1, downloaded a recovered image(new twrp ), select image, recover and flash .. and the screen continues black, do not start twrp ... !!!!
Click to expand...
Click to collapse
I test a lot of systems . Last I was on mokee 7.1.2 with redwolf twrp with vendor partition ( not the latest ) . I install f2v.zip then twrp https://github.com/cosmedd/android_...eases/download/20180413/20180413_recovery.img . After that restart to recovery . Finally install to the latest Aex . No problems at all . First of all start with 2018.03.11 twrp , then install f2v.zip , 2018.04.13 twrp , restart to recovery and install aex or rr . That's all
Hy bro,
Can you send me the twrp version 2018.03.11 link?
failed to mount 'vendor'
After following the previous steps. TRWP start to show "failed to mount 'vendor' (invalid argument)'" message. I'm able to install the AEX 5.4, but the google apps do not crashes.
Any help?
Solved: wrong TWRP.
Nice boot animation
JustBr said:
Hy bro,
Can you send me the twrp version 2018.03.11 link?
Click to expand...
Click to collapse
https://github.com/cosmedd/android_...eases/download/20180311/20180311_recovery.img
mar.ur said:
https://github.com/cosmedd/android_...eases/download/20180311/20180311_recovery.img
Click to expand...
Click to collapse
Last help, I do everything by the pc, in fasboot mode ? or last twrp by his flash (twrp).
Hi,
I was updating my OP6T to the new version (Magisk + Xxx NoLimits), but after the reboot post-update the device started to reboot to recovery after it booted. So I've tried to delete Magisk but the problem was still present, so I've decided to download the latest Oxygen ROM from the OnePlus and flash it from TWRP, but after flashing, the device started to always boot to recovery (before the OnePlus boot animation).
At least i tried to restore a nandroid backup of 1 month ago (System, Boot and Data), but still the device after the restore still boot to recovery before the boot animation.
I've only tried the system reboot (I've not tried to force boot another slot).
Do you have a solution to try before formatting the internal storage?
Thanks
Edit: After unistalling magisk and reflashing it again, now the device boots again, but immediately after (when the lock screen appear) the device reboot automatically to recovery again
Try this:
- in twrp , dirty flash the rom you are using (Oxygen os)
- factory reset
- flash twrp (the latest the better)
- flash Magisk 19.1
Reboot to system.
If this not working, Format data will work.
null0seven said:
Try this:
- in twrp , dirty flash the rom you are using (Oxygen os)
- factory reset
- flash twrp (the latest the better)
- flash Magisk 19.1
Reboot to system.
If this not working, Format data will work.
Click to expand...
Click to collapse
Factory reset from TWRP?
yes
null0seven said:
yes
Click to expand...
Click to collapse
So, do you mean the classic Wipe data, cache and dalvik?
https://forum.xda-developers.com/oneplus-6t/how-to/official-oxygenos-9-0-4-ota-oneplus-6t-t3860953
TWRP Users
1. Boot into TWRP and Flash the Latest Magisk Uninstaller
2. Flash the latest Full Oxygen OS Zip
3. Flash the TWRP installer Zip
4. Reboot to RECOVERY to make sure TWRP stays and continue to root.
5. Flash the Latest Magisk to maintain root
6. Reboot System and Enjoy the latest firmware without any data loss
Click to expand...
Click to collapse
I am guessing you skipped the first step...
Try this:
Flash the OTA zip
Reboot (you will be unrooted and with stock recovery)
Boot to TWRP through ADB
Flash magisk unistaller
Reboot
Boot to TWRP through ADB
Flash OTA zip
Flash TWRP
Reboot to TWRP
Flash magisk
Galeanatur said:
https://forum.xda-developers.com/oneplus-6t/how-to/official-oxygenos-9-0-4-ota-oneplus-6t-t3860953
I am guessing you skipped the first step...
Try this:
Flash the OTA zip
Reboot (you will be unrooted and with stock recovery)
Boot to TWRP through ADB
Flash magisk unistaller
Reboot
Boot to TWRP through ADB
Flash OTA zip
Flash TWRP
Reboot to TWRP
Flash magisk
Click to expand...
Click to collapse
I don't have the OTA but the full rom, isn't simplier to update with the full ROM?
I think I'm going to try the null0seven's solution
null0seven said:
Try this:
- in twrp , dirty flash the rom you are using (Oxygen os)
- factory reset
- flash twrp (the latest the better)
- flash Magisk 19.1
Reboot to system.
If this not working, Format data will work.
Click to expand...
Click to collapse
Ok, I've done this and actually is even worse, the device started to boot in recovery again and TWRP doesn't recognize that the internal storage is crypted, so i can't even access the internal storage (it shows only strange folders), so, now I can't flash the nandroid backup anymore.
I also mean FULL rom .zip.
Format data in twrp or in Fastboot. Or use MSM tool .
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
all of them will wipe ALL in youre phone, but it will work.
null0seven said:
I also mean FULL rom .zip.
Format data in twrp or in Fastboot. Or use MSM tool .
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
all of them will wipe ALL in youre phone, but it will work.
Click to expand...
Click to collapse
So I've to Full wipe and then adb sideload the ROM? Because at the current state I can't even boot the device, it always starts in TWRP
Edit: I've also tried the blue_spark's version but nothing changed, TWRP can't recognize the encrypted storage
you can try this first.
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
fuji97 said:
Hi,
I was updating my OP6T to the new version (Magisk + Xxx NoLimits), but after the reboot post-update the device started to reboot to recovery after it booted. So I've tried to delete Magisk but the problem was still present, so I've decided to download the latest Oxygen ROM from the OnePlus and flash it from TWRP, but after flashing, the device started to always boot to recovery (before the OnePlus boot animation).
At least i tried to restore a nandroid backup of 1 month ago (System, Boot and Data), but still the device after the restore still boot to recovery before the boot animation.
I've only tried the system reboot (I've not tried to force boot another slot).
Do you have a solution to try before formatting the internal storage?
Thanks
Edit: After unistalling magisk and reflashing it again, now the device boots again, but immediately after (when the lock screen appear) the device reboot automatically to recovery again
Click to expand...
Click to collapse
When you're saying you're flashing the full ROM after wiping, are you meaning the xxx no limit? If so this isn't an os rom it's just a magisk module rom that's an add on to oxygen os. You need to wipe and flash the latest oxygen os rom, stable or beta which ever you're using, then flash TWRP, flash your os again on the other slot, flash TWRP, flash magisk, if your system boots fine then flash the xxx no limits rom in twrp.
ebproject said:
When you're saying you're flashing the full ROM after wiping, are you meaning the xxx no limit? If so this isn't an os rom it's just a magisk module rom that's an add on to oxygen os. You need to wipe and flash the latest oxygen os rom, stable or beta which ever you're using, then flash TWRP, flash your os again on the other slot, flash TWRP, flash magisk, if your system boots fine then flash the xxx no limits rom in twrp.
Click to expand...
Click to collapse
No, I flashed the full ROM downloaded from the OnePlus server
Have you tried formatting data?
Cablespider said:
Format data.
Click to expand...
Click to collapse
So, full format data and flash rom + TWRP + Magisk?
fuji97 said:
No, I flashed the full ROM downloaded from the OnePlus server
Click to expand...
Click to collapse
You're best bet is to use the MSM tool
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Ok, I've decided to use MSM to recover the device, I've lost the internal storage, but at least the device is working again.
Thank you to everyone who helped me in this thread
fuji97 said:
Ok, I've decided to use MSM to recover the device, I've lost the internal storage, but at least the device is working again.
Thank you to everyone who helped me in this thread
Click to expand...
Click to collapse
Maybe it was a Magisk module that caused it. I removed pixel module from Magisk and it done the same to me.
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Same thing happening to me, no matter what I do, stock recovery keeps overwriting TWRP
Oh dear, that doesn't sound good.
I hope there will be a solution to the problem soon.
I don't want to do without TWRP and root.
I wanted to try it according to these instructions "https://miui.blog/redmi-k20/twrp-mi-9t-redmi-k20-vbmeta-mauronofrio/". But don't trust me, I'm afraid that it won't work and I can start all over again.
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
The fact that twrp is lost when flashing official rom (even thought twrp itself) is normal. You just have to reboot into bootloader and flash twrp again and it will be back.
Your problem here is that you are using an old and unofficial twrp build, that has problems on newer roms. Flash official twrp and you'll be fine
houbaba said:
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
Click to expand...
Click to collapse
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
hounter17 said:
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
Click to expand...
Click to collapse
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Oh sorry it works? I read somewhere that the original causes also bootloops :good:
Found something on a Russian website.
Обновление TWRP Recovery от LR.Team для устройств на Android 10
Does anyone dare to test this?
Here is the link to the TWRP for our Mi9t
> TWRP-3.3.1-1109-DX (полный комплект для установки) <
Check it out...
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
frank808 said:
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
Click to expand...
Click to collapse
Where did you get the twrp file from?
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Ok, I am on global 11.0.4.0 (QFJMIXM) and I used this latest twrp-3.3.1-0-davinci.img and I can confirm its working without bootloop.
ShiningScias said:
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
Click to expand...
Click to collapse
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
zgfg said:
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
Click to expand...
Click to collapse
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
A custom Recovery doesn't change Widevine level.
And TWRP is useful in case of bootloop (because of an installed Magisk module, by example) or if you want to easily reinstall Magisk after ROM update.
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Micdu70 said:
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
Click to expand...
Click to collapse
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
zgfg said:
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Yes, it should work.
But I prefer OrangeFox Recovery.
zgfg said:
so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Micdu70 said:
Yes, it should work.
But I prefer OrangeFox Recovery.
Click to expand...
Click to collapse
Something is fishy. IMO, if that official TWRP is really ok for 11.0.4.0, then it should correctly boot by:
fastboot boot twrp-3.3.1-0-davinci.img
But phone rebooted into the dark.
TG, I didn't really flash with, so by long pressing Pow it rebooted to system.
Tried again, no avail
Edit:
Tried the same fastboot boot with
twrp-3.3.1-12-davinci-mauronofrio.img and also OrangeFox-R10.1_1-Stable-davinci.img (obtained by unzipping OrangeFox), but it also reboots to dark and I have to long press Pow to reboot to system
frank808 said:
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Click to expand...
Click to collapse
You can install twrp by All In One tool
You can find its thread here itself
I took the official TWRP. " Link "
Flashed in fastboat and then booted the phone with a key combination in TWRP.
With the Fastboot command it didn't work for me either, the cell phone remained black ...
This thread is not pirated, mirrored or copy of official twrp
I'm just sharing the official TWRP 3.6.0_9-0 patched boot img for Stock Android 10, 11 & Custom ROMs
Whats Working?
Everything
Whats Not Working?
Encryption/Decryption of Data
Download
Unofficial TWRP 3.6.0_9-0 IMG for Stock Android 10, 11 & Custom ROMs
https://androidfilehost.com/?fid=17825722713688272934
Official TWRP 3.6.0_9-0 IMG for Stock Android 9 only
https://dl.twrp.me/laurel_sprout/twrp-3.6.0_9-0-laurel_sprout.img.html
Official TWRP Installer 3.6.0_9-0 ZIP for Stock Android 9, 10 & Custom ROMs
https://dl.twrp.me/laurel_sprout/twrp-installer-3.6.0_9-0-laurel_sprout.zip.html
Note: enable "use rm -rf instead of formatting" in TWRP settings, before you wipe data, else userdata partition will be ****ed
Hit thanks button if you liked my work
Reserved
Deleted
Will this be able to format data on Android 10 encryption like SHRP?
Flashed it from fastboot but doesn't come ,only comes fastboot mode ?
Only Sharp works in 10 properly.
Sami Devo said:
Flashed it from fastboot but doesn't come ,only comes fastboot mode ?
Only Sharp works in 10 properly.
Click to expand...
Click to collapse
Your not doing it right because everyone else is able to install all recoveries it's only you who is having these issues. Without a proper bug report nobody can help you though
Rajendran Rasa said:
This thread is not pirated, mirrored and copy the official twrp
I'm just sharing the official TWRP 3.4.0-0 patched img of Android 10
Unofficial TWRP 3.4.0-0 for Android 10
https://androidfilehost.com/?fid=8889791610682878366
Official twrp-3.4.0-0 for Android 9
https://dl.twrp.me/laurel_sprout/twrp-3.4.0-0-laurel_sprout.img.html
Official twrp-installer-3.4.0-0 for Android 9&10
https://dl.twrp.me/laurel_sprout/twrp-installer-3.4.0-0-laurel_sprout.zip.html
Note: enable "use rm -rf instead of formatting" in TWRP settings, before you wipe data, else userdata partition will be damaged
Hit thanks button if you liked my work?
Click to expand...
Click to collapse
Which one should I download? unofficial?
hello, i have this noob question:
i have 4 year flashing twrp and roms... but i'm new with this device and its slotA slotB issue (fastboot boot loop)...
please OP, can you tell us the tutorial of how install correctly the official twrp? i saw videos on youtube but none has this 3.4.0 version.
thank you very much for your hard work, i really apreciatte it.
and thanks in advance for your comments.
garylawwd said:
Your not doing it right because everyone else is able to install all recoveries it's only you who is having these issues. Without a proper bug report nobody can help you though
Click to expand...
Click to collapse
Oops sorry it was orange fox.!! It has problem!
"........else userdata partition will be damaged"
what does it mean??....I will lost my data???...or phone can be bricked??.....what can happen exctly??
ovi2901 said:
"........else userdata partition will be damaged"
what does it mean??....I will lost my data???...or phone can be bricked??.....what can happen exctly??
Click to expand...
Click to collapse
It just won't boot. You can still recover from this by enabling the setting in twrp and reformatting data.
You will lose data regardless of this being enabled because this is only used for formatting data. That's what formatting data does
garylawwd said:
It just won't boot. You can still recover from this by enabling the setting in twrp and reformatting data.
You will lose data regardless of this being enabled because this is only used for formatting data. That's what formatting data does
Click to expand...
Click to collapse
can I install shrp recovery zip and then miui12...
what I will do is -->
1. install this recovery in b slot through minimal adb
2. boot in twrp
3. install shrp recovery zip file (phone is still in b-slot)
4. change slot to a
5. reboot recovery
6. format data
7. install miui12
8. reboot
will this steps safely boot my device???
hello. first thank you very much for your hard work. i really apreciate.
so, i was on stock rom, freshly unlock the bootloader and flash twrp unofficial for android 10.
then in twrp i flash the zip installer and reboot to recovery.
once again in twrp i, like i'm use to, wipe successfully dalvik/system/data to erased all of stock rom.
then i format data (the one typing "yes" for confirmation) but it broke internal storage.
twrp does not show any file or folders. i rebooti in recovery but it won't show anything
i reflash twrp and the same... nothing.
so i went to fastboot mode and flash shrp, boot up in recovery but it was still not showing files or folders of internal storage. i wipe dalvik/system/data and reboot to recovey.
and this time it show folder but with codes like "QRGHQ9R4HGVUQE4RNG98TH9324HTG923" OR "66EFQ3KFK4TK34KT3K4K34K2KK2" and so...
what do i 'm doing wrong?
can i format data with out breaking internal storage?
the only thing i can do to get internal storage was flash stock rom again, i have not encrypted anything, i don't use microsd card, even i don't use password to unlock screen.
thanks in advance for your comments.
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
ovi2901 said:
can I install shrp recovery zip and then miui12...
Click to expand...
Click to collapse
this it twrp thread bro
d_g_m_2000 said:
hello. first thank you very much for your hard work. i really apreciate.
so, i was on stock rom, freshly unlock the bootloader and flash twrp unofficial for android 10.
then in twrp i flash the zip installer and reboot to recovery.
once again in twrp i, like i'm use to, wipe successfully dalvik/system/data to erased all of stock rom.
then i format data (the one typing "yes" for confirmation) but it broke internal storage.
twrp does not show any file or folders. i rebooti in recovery but it won't show anything
i reflash twrp and the same... nothing.
so i went to fastboot mode and flash shrp, boot up in recovery but it was still not showing files or folders of internal storage. i wipe dalvik/system/data and reboot to recovey.
and this time it show folder but with codes like "QRGHQ9R4HGVUQE4RNG98TH9324HTG923" OR "66EFQ3KFK4TK34KT3K4K34K2KK2" and so...
what do i 'm doing wrong?
can i format data with out breaking internal storage?
the only thing i can do to get internal storage was flash stock rom again, i have not encrypted anything, i don't use microsd card, even i don't use password to unlock screen.
thanks in advance for your comments.
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
this it twrp thread bro
Click to expand...
Click to collapse
Ok you performed Format > And type "Yes" , actually this will Format your internal storage as well, RIP for your Data now else you took a backup earlier.
Now connect your phone to your PC with data cable , in mount section check if MTP is enabled if not then enable it , now your phone's internal storage shows in PC transfer Rom flash Zip files to internal storage, disconnect from PC and flash that rom.
Recovery choice is yours SHRP or TWRP
Note - Do not perform format > yes before flashing that zip.
Sent from my Mi A3 using Tapatalk
Not able to flash recovery
I am on the latest stock android patch, probably that's why not able to flash recovery.
First I tried TWRP 3.3.1-2 Unofficial by Nikesh Kataria from the other post. As it said it supported android 10 with decryption and everything. But it didn't work.
Now with version 3.4.0-0, I am able to boot into recovery using platform-tools. But the files in /sdcard seems to be encrypted (judging by the codes shown instead of readable folder names).
Could someone please help me suggest any recovery which supports latest stock android 10 with decryption?
Is there a way around this?
https://drive.google.com/file/d/1TcRxuBUde9chk3MWbvFWhUuojS-iZ8x2/view?usp=sharing
Thanks in advance!
Themane said:
I am on the latest stock android patch, probably that's why not able to flash recovery.
First I tried TWRP 3.3.1-2 Unofficial by Nikesh Kataria from the other post. As it said it supported android 10 with decryption and everything. But it didn't work.
Now with version 3.4.0-0, I am able to boot into recovery using platform-tools. But the files in /sdcard seems to be encrypted (judging by the codes shown instead of readable folder names).
Could someone please help me suggest any recovery which supports latest stock android 10 with decryption?
Is there a way around this?
https://drive.google.com/file/d/1TcRxuBUde9chk3MWbvFWhUuojS-iZ8x2/view?usp=sharing
Thanks in advance!
Click to expand...
Click to collapse
Decryption will only work if you format data first. This is with every recovery. Has to be a factory reset of stock ROM or fresh install of custom ROM and from then twrp will be able to decrypt if it is installed, you're not installing it either by the way just temporarily installing it to inactive slot which will get wiped on reboot. For twrp to decrypt you must install it using the installer.zip by flashing it in you're temporarily installed twrp.img
garylawwd said:
Decryption will only work if you format data first. This is with every recovery. Has to be a factory reset of stock ROM or fresh install of custom ROM and from then twrp will be able to decrypt if it is installed, you're not installing it either by the way just temporarily installing it to inactive slot which will get wiped on reboot. For twrp to decrypt you must install it using the installer.zip by flashing it in you're temporarily installed twrp.img
Click to expand...
Click to collapse
Thanks for the help.
But after booting into twrp, how do I install twrp.zip. I even tried sideload that also errors out "Unable to find partition for path /cache".
May be I am missing some step. But here is what I have done.
Unlocked bootloader.
Booted into TWRP on inactive_slot(i.e. slot_b , in my case) with command fastboot flash boot twrp.img
Trying to install twrp.zip (failing at this step itself).
Themane said:
Thanks for the help.
But after booting into twrp, how do I install twrp.zip. I even tried sideload that also errors out "Unable to find partition for path /cache".
May be I am missing some step. But here is what I have done.
Unlocked bootloader.
Booted into TWRP on inactive_slot(i.e. slot_b , in my case) with command fastboot flash boot twrp.img
Trying to install twrp.zip (failing at this step itself).
Click to expand...
Click to collapse
Put the zip on an SD card
Some ROM has some recovery integrated within the OS. If i install that and then the ROM, will the ROM's recovery overwrite this?
mihovkris said:
Some ROM has some recovery integrated within the OS. If i install that and then the ROM, will the ROM's recovery overwrite this?
Click to expand...
Click to collapse
Yes
Flash twrp installer zip after flashing rom zip