Hello,
After having tried to flash a custorm recovery mode, I don't have access to any recovery mode and I have RECOVERY IS NOT SEANDROID ENFORCING.
Then I tried to root it in Download mode, selection my Root file in AP with Odin and now when I tried to normally boot on Android I have a black screen asking me to enter my password to startup my device. I tried "default_password" as suggested on other websites, it didn't work, I tried my Google account password which didn't work either ..
Can someone help me to fix this. I cannot use my phone anymore.
My phone is a Galaxy J2 Prime SM-G532M (I bought in Vanuatu), with Android 6.0.1
Thanks.
I could fix the problem by reflashing the Samsung Rom, I'd like to find the Nude Rom with only Google without Samsung layer for 6.0.1, where can I find it ?
Related
Hi, I've just recently switched over from iphone to android so I'm still new to the whole system. Anyway I've been trying to root my phone for the past 2 days to no avail so I'm at my wits end here. Before I start my phone is from korea which I don't know if whether or not impacts its ability to be rooted, I've done all the basics like enable USB debugging from dev mode, install samsung usb drivers, open ODIN in admin mode and allow MTP to computer. My Device details are below:
>Baseband version : G906SKSU1CPF1
>KERNEL : 3.10.40-8533426
>BUILD NUMBER : MMB29M.G906SKSU1CPF3
So anyway I first tried flashing using CF autoroot for sm-G906S with odin which while it said it was passed and was successful on pc it would be stuck on the samsung logo with a message at the top left that said :
>Recovery booting
>Recovery is not seandroid enforcing
>set warranty bit recovery
So then I tried flashing TWRP custom recovery and putting Super user zip in the internal storage which although got my phone back to working order still wouldnt let me root as the process required me to go to recovery mode from the fastboot mode after it was done flashing (I tried both with and without autoreboot), however once the flashing was done on fastboot I couldn't get to recovery mode no matter how long I held the Vol up/power/home button combination and when i tried it after rebooting it would show normal recovery mode hence there was no way to install the Super User. (Also attempted this with phils recovery)
I then tried to do the TWRP method using adb with command prompt however it would get stuck saying waiting for device when i tried to flash and needless to say kingroot also failed.
At this point as far I've gone through all the methods I could find for my particular device. Would greatly appreciate any insight or advice regarding this problem.
Thanks
start reading from here http://forum.xda-developers.com/gal...ner-thread-t2807639/post68725608#post68725608
I had CWM installed on my S5 and i enabled reactivation lock after that i booted into recovery mode and boom i got stuck there it wont boot. It is giving me an error CUSTOM BINARY BLOCKED BY REACTIVATION LOCK.
Now i cant boot to my homescreen :/ + i dont remember my build version what i remember is that it had android 5.0 and in build number there was something G900P. So which firmware should i download now? (I AM NOOB PARDON MY ENGLISH). Also is there any fix for this error message? Without flashing the whole device? I tried going into download mode and selecting restart from there but it didnt work for me. Thanks in advance.
Hello all! I need some help with my Note 3 Sm n900p
I am in root (used win10 and kingo root for this) with absolute success.
Next, I followed this guide on Youtube: watch?v=4LyG5KW5jpQ
Upon flashing the TWRP .img file and rebooting I am stuck on the Galaxy Note 3 startup screen with the message "Set Warranty Bit: Kernel" above it. It wouldn't allow me to shut the phone down, but I was able to reboot into recovery mode and factory reset/wipe the data partition.
It still will not boot or do anything beyond that same splash screen. I removed the battery as the phone will not shut down.
I don't know much about flashing custom ROMs, I was attempting to install TWRP so that I could flash Lineage OS 15.1 without using ODIN, without using a computer. Please help. I can't get it to boot at all as it stands and I'm worried I've bricked it permanently
Usual is wrong TWRP flashed.
What did you use to flash this youtube TWRP ??
As you are posting in a forum not for your phone its 99% a file for a different model .
Suggest you post in the forum for your model .
https://forum.xda-developers.com/note-3-sprint
Did you unlock the phone's bootloader? I believe Sprint phones come with locked bootloaders.
Hi there,
I have a Samsung Galaxy Tab A6 (SM-T285) which I bought today. I followed this tutorial to install twrp, ultimately to root the device:
I can't even post links so sad. But the link was of **********.
Everything worked fine and I was able to boot and reboot fine. Until I signed in with my Google Account. After trying to reboot, I get a black screen with the Samsung logo and a text in red saying: Custom binary blocked by FRP Lock. I went back to the store and they advised me to install Samsung Smart Switch to try and restore. In the Smart Switch program I get an error saying that the device is not supported by Smart Switch.
I can get into download mode, not into any other mode. I can't get into recovery mode. The tablet doesn't start up at all. On the download mode it also says FRP Lock ON.
When I go back into ODIN and retry to install the from above TWRP image, it says operation failed.
Can anybody please advice? I am at a complete loss. Am I supposed to flash the original boot file? Where can I find that for my device? Will my tablet accept that, since ODIN didn't even want to flash my current TWRP image a second time?
P.S. I only read later that you are supposed to change the OEM setting. I didn't. Is that the cause of this issue, and if so, can I do something about it?
Thanks
Pro_Gamer368 said:
Hi there,
I have a Samsung Galaxy Tab A6 (SM-T285) which I bought today. I followed this tutorial to install twrp, ultimately to root the device:
I can't even post links so sad. But the link was of **********.
Everything worked fine and I was able to boot and reboot fine. Until I signed in with my Google Account. After trying to reboot, I get a black screen with the Samsung logo and a text in red saying: Custom binary blocked by FRP Lock. I went back to the store and they advised me to install Samsung Smart Switch to try and restore. In the Smart Switch program I get an error saying that the device is not supported by Smart Switch.
I can get into download mode, not into any other mode. I can't get into recovery mode. The tablet doesn't start up at all. On the download mode it also says FRP Lock ON.
When I go back into ODIN and retry to install the from above TWRP image, it says operation failed.
Can anybody please advice? I am at a complete loss. Am I supposed to flash the original boot file? Where can I find that for my device? Will my tablet accept that, since ODIN didn't even want to flash my current TWRP image a second time?
P.S. I only read later that you are supposed to change the OEM setting. I didn't. Is that the cause of this issue, and if so, can I do something about it?
Thanks
Click to expand...
Click to collapse
Reinstall stock rom
Change OEM setting in Developer Options
Then you install TWRP - Turn off auto reboot in TWRP
After ODIN install, manually reboot to recovery.
gcrutchr said:
Reinstall stock rom
Change OEM setting in Developer Options
Then you install TWRP - Turn off auto reboot in TWRP
After ODIN install, manually reboot to recovery.
Click to expand...
Click to collapse
wait......... do i off oem unlock or on it
Pro_Gamer368 said:
wait......... do i off oem unlock or on it
Click to expand...
Click to collapse
slide the button to the right
gcrutchr said:
slide the button to the right
Click to expand...
Click to collapse
thanks, you're a legend :good::good::good:
Hi there,
I got an old man's S7 Edge (SM-G935F) and I'd like to help him rescuing his photos (he doesn't have a periodic backup but he learned from this now).
The phone did stuck at the boot screen. He didn't try to modify anything.
FRP Lock on unfortunately. Should be the latest Android.
I can enter the download mode (not the recovery) but no chance for TWRP b/c of FRP. Same error for an engineering recovery I found online.
AP SUREV: B:8 K:B S:7
So I got me two OEM firmware packages with Frija and try to reflash but it always stuck at flashing "boot.img" endlessly.
Also it got me to the "An error has occurred while updating the device software, Use the Emergency recovery function in the Smart Switch PC software." screen now.
(I have no code for Smart Switch recovery but I still can get into download mode using FRP Hijacker.)
Is the NAND most likely roasted and the only hope may be chipoff? Tried on different PCs with different cables.
Thanks,
Nico
Edit: I don't need a working device, decrypted dump would be enough.
Edit 2: When I skip the AP package (containing the "boot.img.lz4"), it stucks at flashing "RADIO" after a few percent.