Anyone noticed the new firmware found with FF? The version is NXT-L09C432B580, dated 2017.04.19. None of system update or HiCare early adopters shows it.
How can it used to flash the phone?
Thanks.
I tried to download it for my Huawei Mate 8 L29C185 ...
In firmware finder it's showing L29C185B580 but it didn't work for me ... after the full file download ... 2.2 GB it's say this
You can try here!
Have any one got success installing this and how is your experience with it ? stable ? faster performance ? battery life ?
---------- Post added at 11:33 PM ---------- Previous post was at 11:13 PM ----------
does the hisuite method over proxy install work with this update ?
Also will it work with L29?
franzyroy said:
You can try here!
Click to expand...
Click to collapse
Hi there,
Can you provide me a link for my Huawei Mate 8 L29C185 ... and u sure that update work ...
blackinfinity said:
Also will it work with L29?
Click to expand...
Click to collapse
Have update for the L29C432, but I still don't tried it.
iamSHANTO said:
Hi there,
Can you provide me a link for my Huawei Mate 8 L29C185 ... and u sure that update work ...
Click to expand...
Click to collapse
Here!
---------- Post added at 12:08 ---------- Previous post was at 12:05 ----------
ronnie72 said:
Have update for the L29C432, but I still don't tried it.
Click to expand...
Click to collapse
I checked yesterday but nothing, today it's there! :laugh:
franzyroy said:
Here!
---------- Post added at 12:08 ---------- Previous post was at 12:05 ----------
Click to expand...
Click to collapse
Thanks, I might give this a try. Got a glitch with bluetooth since 321. Every reboot, you have to manually turn on bluetooth, and the
previous 185 version you did not.
p51d007 said:
Thanks, I might give this a try. Got a glitch with bluetooth since 321. Every reboot, you have to manually turn on bluetooth, and the
previous 185 version you did not.
Click to expand...
Click to collapse
Maybe with it, you will fix your issue. I hope for you!
franzyroy said:
Maybe with it, you will fix your issue. I hope for you!
Click to expand...
Click to collapse
Well, no luck there
I downloaded, unzipped, stuck it in the dload folder, rebooted with the up/down volume. It's like it did
with the firmware finder app also, gets to 5% and fails. Sounds like I'll have to wait until the built in
app says it is available...again.
I'll keep the link though, perhaps one day it will work properly.
If it helps, this is the one I downloaded.
2017.03.27 NXT-L29C185 NXT-L29C185B580 changelog update 1408764557 OTA 1582 104 82090 2
franzyroy said:
Here!
---------- Post added at 12:08 ---------- Previous post was at 12:05 ----------
I checked yesterday but nothing, today it's there! :laugh:
Click to expand...
Click to collapse
Cool i hope some can try it before I do to confirm it works. How to install this? What is the difference between the OTA and full version?
p51d007 said:
Well, no luck there
I downloaded, unzipped, stuck it in the dload folder, rebooted with the up/down volume. It's like it did
with the firmware finder app also, gets to 5% and fails. Sounds like I'll have to wait until the built in
app says it is available...again.
I'll keep the link though, perhaps one day it will work properly.
If it helps, this is the one I downloaded.
2017.03.27 NXT-L29C185 NXT-L29C185B580 changelog update 1408764557 OTA 1582 104 82090 2
Click to expand...
Click to collapse
Your bootloader is locked, right? I ask it because I wonder if there is an order to install these differents files, and I wonder if it will be easier to install it via TWRP. I looked the content of the small file and I'm not sure what it is.
---------- Post added at 05:13 PM ---------- Previous post was at 05:06 PM ----------
Maybe we have to install the small file before, it seems to be a patch file. So perhaps we have to install it for the second works.
franzyroy said:
Your bootloader is locked, right? I ask it because I wonder if there is an order to install these differents files, and I wonder if it will be easier to install it via TWRP. I looked the content of the small file and I'm not sure what it is.
---------- Post added at 05:13 PM ---------- Previous post was at 05:06 PM ----------
Maybe we have to install the small file before, it seems to be a patch file. So perhaps we have to install it for the second works.
Click to expand...
Click to collapse
Could be...Yes, I'm pretty sure the bootloader is locked. There is an option in developer options to allow it to be unlocked, but
it pops up a security warning, so I don't know if it will work or if it will hose something else.
I guess the "official" 580 will hit my phone one of these days soon.
p51d007 said:
Could be...Yes, I'm pretty sure the bootloader is locked. There is an option in developer options to allow it to be unlocked, but
it pops up a security warning, so I don't know if it will work or if it will hose something else.
I guess the "official" 580 will hit my phone one of these days soon.
Click to expand...
Click to collapse
Another user has had the official but same, it didn't work. Is it a true update? I saw on a site there were some false updates..
blackinfinity said:
Cool i hope some can try it before I do to confirm it works. How to install this? What is the difference between the OTA and full version?
Click to expand...
Click to collapse
You can see the difference with Huawei extractor in the screenshots below.
These are the files:
DTS.img
MODEMNVM_UPDATE.img
PRODUCT.img
RECOVERY2.img
SYSTEM.img
VENDOR.img
They are missing in OTA file.
"Huawei made changes in the installation process of the firmware. Now the firmware before installation passes the procedure of online checking. If you receive an "authentication failure" when installing the firmware, then at this time it is not possible to install this firmware on this unit, you need to wait. For the most stubborn:We did not find a way to bypass this test yet.. You need to wait until your imei is listed for this firmware, or make it "available to all"
Click to expand...
Click to collapse
Seems like the only way we'll be updating our phones from b560 before Huawei pushes OTA, is to roll back and upgrade directly to b580, or flash through custom recovery.
https://w3bsit3-dns.com/forum/index.php?showtopic=719987
This is what i found in network for B580:
Status: Official (beta)
Version: NRD90M
EMUI: 5.0
"Disclaimer: This update is in beta stage which means that it may carry bugs that can have an impact on the usability of the device. Moreover, since this is a multifile update, you may encounter errors if you try installing this with the stock recovery."
ronnie72 said:
This is what i found in network for B580:
Status: Official (beta)
Version: NRD90M
EMUI: 5.0
"Disclaimer: This update is in beta stage which means that it may carry bugs that can have an impact on the usability of the device. Moreover, since this is a multifile update, you may encounter errors if you try installing this with the stock recovery."
Click to expand...
Click to collapse
Personally I do not care about that anymore, b560 is still "beta" right and will be forever...
blackinfinity said:
Personally I do not care about that anymore, b560 is still "beta" right and will be forever...
Click to expand...
Click to collapse
But in middle east version typed official and not beta and may b580 is resolved many bugs.
Related
It's official!
Owners of the EU-Version of the Honor 7 will get the update to Android Marshmallow within the next two weeks! :victory:
Beta testers will get it earlier.
Source:
http://www.androidauthority.com/honor-7-android-6-marshmallow-update-release-673350/
Well spotted, we will all be getting sore fingers tapping that update button
Nice.... Looking forward to getting this beauty on my 7!
I have a rooted Honor 7 with twrp. Do I need to get rid of these to do the update and if so could anyone help a fella out on how to do it please?
Iwholden said:
I have a rooted Honor 7 with twrp. Do I need to get rid of these to do the update and if so could anyone help a fella out on how to do it please?
Click to expand...
Click to collapse
You'll probably have to reflash stock recovery back on with Multi Tool and then hopefully it'll update manually via the dload folder method.
mamboboy said:
You'll probably have to reflash stock recovery back on with Multi Tool and then hopefully it'll update manually via the dload folder method.
Click to expand...
Click to collapse
Thank you for your reply. I've downloaded multitool & all drivers etc but haven't a clue what to do. I tried installing stock rom (I think) says complete but my phone it took about 2 seconds and looks the same.. Am I doing something wrong? Which rom should I choose? Sorry...
already got it....it has Google Now on tap
iamrajeev said:
already got it....it has Google Now on tap
Click to expand...
Click to collapse
do you got it via ota? have you got that zip file? in those firmware folders on you phone..
Hyderabad is in India........
Just formatted my phone and when i've turned it on an OTA update popped up: B313. Do I want it? Is it latest version? Anyone else had it?
Iwholden said:
Just formatted my phone and when i've turned it on an OTA update popped up: B313. Do I want it? Is it latest version? Anyone else had it?
Click to expand...
Click to collapse
B313 is reported as beta version as you will find here. It´s odd you got the OTA notice for a beta.
I would wait some more days for the final MM6.0 release.
iamrajeev said:
already got it....it has Google Now on tap
Click to expand...
Click to collapse
Hi what is the change log like. Does voice wake up to find phone and handsfree calls work?
He propably just got the 320, the second version of the beta.
cars10k said:
He propably just got the 320, the second version of the beta.
Click to expand...
Click to collapse
Indeed, or a OTA bug, like in many other occasions.
I got B330, I am not sure if that is a beta or the full version
AmitJordy said:
I got B330, I am not sure if that is a beta or the full version
Click to expand...
Click to collapse
Can be. Can you share it
---------- Post added at 03:19 PM ---------- Previous post was at 02:59 PM ----------
What build do you uppdate from
magnea said:
Can be. Can you share it
---------- Post added at 03:19 PM ---------- Previous post was at 02:59 PM ----------
What build do you uppdate from
Click to expand...
Click to collapse
Its most likely for the Indian honor model and not the EU model PLK-L01 , see here:
http://forum.xda-developers.com/honor-7/general/plk-ul675b330-marshmallow-update-honor-t3316697
Did anyone get a notification for an update today? The version is "PB1" (LRX21T.G900VVRU2BPB1). It appears to just be a security patch. https://www.verizonwireless.com/support/galaxy-s5-update/ Assuming someone will dump it out, root it, and we'll be able to flash with FlashFire? I've pre-ordered a S7 so I don't know if I'll even try before I ditch this phone.
I'll give it a shot, assuming I can trigger the update.
---------- Post added at 06:53 PM ---------- Previous post was at 06:01 PM ----------
Update has been downloaded. Now lets see if I can pull it.
I'm currently pulling/uploading the update.zip for @muniz_ri or @jrkruse to look at for us.
Hopefully it can be rooted using the new root method and they can make a ROM or 2 for us.
Dudash said:
I'm currently pulling/uploading the update.zip for @muniz_ri or @jrkruse to look at for us.
Hopefully it can be rooted using the new root method and they can make a ROM or 2 for us.
Click to expand...
Click to collapse
Thanks, but if it's 5.1 root won't be possible...I will check it out once you post the file.
muniz_ri said:
Thanks, but if it's 5.1 root won't be possible...I will check it out once you post the file.
Click to expand...
Click to collapse
I doubt it's 5.1.1.
The description for the update said it "Provides the latest security updates" or something like that.
---------- Post added at 08:28 PM ---------- Previous post was at 08:22 PM ----------
PB1 update.zip
Dudash said:
I doubt it's 5.1.1.
The description for the update said it "Provides the latest security updates" or something like that.
---------- Post added at 08:28 PM ---------- Previous post was at 08:22 PM ----------
PB1 update.zip
Click to expand...
Click to collapse
Thanks. Will have the ROMs available for testing pretty quickly, stand by...
EDIT: Trying to upload ROM's but AFH is down. Will try later but may have to wait until tomorrow...
I just started pulling it apart, and it looks like there is a bootloader update included.
Dudash said:
I doubt it's 5.1.1.
The description for the update said it "Provides the latest security updates" or something like that.
---------- Post added at 08:28 PM ---------- Previous post was at 08:22 PM ----------
PB1 update.zip
Click to expand...
Click to collapse
muniz_ri said:
Thanks. Will have the ROMs available for testing pretty quickly, stand by...
EDIT: Trying to upload ROM's but AFH is down. Will try later but may have to wait until tomorrow...
Click to expand...
Click to collapse
See here: http://forum.xda-developers.com/showpost.php?p=65593555&postcount=724
If anyone just wants to update firmware to latest PB1 here is a flashable zip that will update modem firmware and boot image
G900VVRU2BPB1_Firmware_Update.zip
jrkruse said:
If anyone just wants to update firmware to latest PB1 here is a flashable zip that will update modem firmware and boot image
G900VVRU2BPB1_Firmware_Update.zip
Click to expand...
Click to collapse
I'm just waiting on the Odin tar so you can make us a lovely version with the OD5 bootloader in it
Does anyone know if it is 5.1? I was just chatting with Samsung they said it was but I updated and it showed it was still 5.0... So did my phone not fully install it or what?
Someone confirm, this appears to update the bootloader and break our root method
EDIT: All is good
I tried multiple times to update to this ROM today, and I failed multiple times lol. I've tried enough for today. I might try again tomorrow.
jakeh9777 said:
Does anyone know if it is 5.1? I was just chatting with Samsung they said it was but I updated and it showed it was still 5.0... So did my phone not fully install it or what?
Click to expand...
Click to collapse
Still good ol' 5.0. Change list is the same as well. Just a security update from what I gather.
just update with flashfire via http://forum.xda-developers.com/showpost.php?p=65593555&postcount=724 using the same keeproot method? Also, I've never been able to use xposed. Do I have to have deodexed for that?
jakeh9777 said:
Does anyone know if it is 5.1? I was just chatting with Samsung they said it was but I updated and it showed it was still 5.0... So did my phone not fully install it or what?
Click to expand...
Click to collapse
Actually, I doubt you are going to see 5.1 as Samsung is releasing 6.0 for the S5 in May.
Lrx21t.g900vvru2bpb1
I have been getting a notice to install this update and I have been ignoring it because I am afraid it will stop me from being able to activate a Wi-Fi hotspot through PdaNet/foxfi. Has anyone installed this update who uses PdaNet/Foxfi as a hotspot? If so does it still work?
tjkemball said:
I have been getting a notice to install this update and I have been ignoring it because I am afraid it will stop me from being able to activate a Wi-Fi hotspot through PdaNet/foxfi. Has anyone installed this update who uses PdaNet/Foxfi as a hotspot? If so does it still work?
Click to expand...
Click to collapse
Go to this link below and see if it answers your question(s). It's also located in the Q&A section of this S5 forum
http://forum.xda-developers.com/verizon-galaxy-s5/help/build-foxfi-t3311686
Chopstix9 said:
Actually, I doubt you are going to see 5.1 as Samsung is releasing 6.0 for the S5 in May.
Click to expand...
Click to collapse
What?! the Verizon S5 is getting 6.0? Is this confirmed anywhere I've been away for a while buy assumed we weren't getting 6.0
aholeinthewor1d said:
What?! the Verizon S5 is getting 6.0? Is this confirmed anywhere I've been away for a while buy assumed we weren't getting 6.0
Click to expand...
Click to collapse
Several weeks, maybe a month ago one of the android news sites listed the Samsung timetable for the phones that would get it. It wasn't carrier specific but rather device specific and the S5 is slated for a May release from Sammy according the article I read.
As per HTC USA twitter,
Android Nougat will begin rolling out to the unlocked #HTCOneM9 starting late this evening. Carrier variants to follow early next year.
Click to expand...
Click to collapse
Source: Twitter
Ready to flash ZIP file:
http://forum.xda-developers.com/showpost.php?p=70004129&postcount=123
Thanks to @Kartoffelrudi
Get the OTA Zip from here:
http://forum.xda-developers.com/showpost.php?p=69953879&postcount=23
Thanks to @andrewia
Easiest way to install is:
Restore TWRP Backup. Seems to work even on unlocked sprint.
Get the backup from HERE
Instructions on how to restore:
1. Download the rar, extract it to your PC.
2. Boot to recovery mode, take a backup of just the boot.
3. Mount USB Storage in TWRP, and connect to PC.
4. Navigate to TWRP - Backups - HT5xxx - 2016xxx
5. Delete the stuff
6. Copy the extracted stuff (ensure that the file format of your sd card is exfat)
7. Restore using TWRP
Its recommended to factory reset.
ROOT:
Easiest way to root is by using Magisk.
Instructions:
1. Install Magisk v9 by flashing the zip in TWRP. Reboot.
2. Install Magisk Manager.
3. Open Magisk Manager - Downloads - phh's SuperUser
4. Reboot to Recovery, flash phh's SuperUser zip
5. Reboot, and install phh's SuperUser from PlayStore.
You may use Magisk Manager to disable root for Pokemon, or Google Pay.
It's downloading on my M9 as I type this! The update version is 4.14.617.6, and the size of the OTA is 1.21 GB.
Hai Karate said:
It's downloading on my M9 as I type this! The update version is 4.14.617.6, and the size of the OTA is 1.21 GB.
Click to expand...
Click to collapse
Gah! I'm in the northeast US still haven't got it yet. I wonder if I should clear cache or something I keep checking every 5 min!
edit: And I get the update 3 seconds after I post this lol
---------- Post added at 12:45 AM ---------- Previous post was at 12:42 AM ----------
I hope this brings battery improvements. Getting an average of 2hrs 45min SOT no matter what I do. Worse than lollipop.
Is this the last official update? Or maybe we get 7.1.1?
i see from internet
con_sau_may_tinh said:
i see from internet
Click to expand...
Click to collapse
It's not mentioned but I guess it includes Sense 8 ?
fhartane said:
It's not mentioned but I guess it includes Sense 8 ?
Click to expand...
Click to collapse
Not mentioned. But hopefully.
Let's see what the users who have updated has to say.
Nothing on the ROM downloads page yet, should be at this link once it's up if the URL scheme is the same: http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_4.14.617.6.exe
---------- Post added at 11:26 PM ---------- Previous post was at 11:26 PM ----------
If anyone can use ADB to capture the OTA URL, we would really appreciate it! It should look something like this old link: http://fotadl.htc.com/OTA_HIMA_UL_L....32.617.30_release_439080bgi83v6gaebkl3on.zip
andrewia said:
Nothing on the ROM downloads page yet, should be at this link once it's up if the URL scheme is the same: http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_4.14.617.6.exe
---------- Post added at 11:26 PM ---------- Previous post was at 11:26 PM ----------
If anyone can use ADB to capture the OTA URL, we would really appreciate it! It should look something like this old link: http://fotadl.htc.com/OTA_HIMA_UL_L....32.617.30_release_439080bgi83v6gaebkl3on.zip
Click to expand...
Click to collapse
I don't have the correct SKU and don't have the time for flashing the needed firmware. However, if you need an alternative to ADB: Method 1 from this post can be used with the M9, too.
yeah after RUU dev editon, i'm check update and got it
babu.rajiv2007 said:
As per HTC USA twitter,
Source: Twitter
Click to expand...
Click to collapse
M9 Developer Edition have Nougat http://i.imgur.com/cQMeI1t.jpg
babu.rajiv2007 said:
Not mentioned. But hopefully.
Let's see what the users who have updated has to say.
Click to expand...
Click to collapse
I just completed updating. It is 99% sense 8. The only difference I'm seeing is that the quick setting shade retains the same shade of grey.
Good news: navbar icons are aosp-like now, double tap to quick switch between apps work, multiwindow works and you can change the dpi in settings like in aosp nougat. Also, the default theme closely resembles the htc10's (same wallpaper?).
So I've got a ViperOneM9 5.3.0 rom and I can't get the OTA...can I flash it manually?
How?
finish
---------- Post added at 03:40 PM ---------- Previous post was at 03:36 PM ----------
Crackfreak said:
So I've got a ViperOneM9 5.3.0 rom and I can't get the OTA...can I flash it manually?
How?
Click to expand...
Click to collapse
go back to stock (stock RUU of developer edition) and check update
link ruu of dev
http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_3.35.617.31.exe
con_sau_may_tinh said:
finish
---------- Post added at 03:40 PM ---------- Previous post was at 03:36 PM ----------
go back to stock (stock RUU of developer edition) and check update
link ruu of dev
http://dl3.htc.com/application/RUU_HIMA_UL_M60_SENSE70_ATT_MR_NA_Gen_Unlock_3.35.617.31.exe
Click to expand...
Click to collapse
Thanks a lot man...U rock?
---
Kartoffelrudi said:
I just received the OTA for the developer edition in Germany, will try to flash with FlashFire since i use systemless root.
If it works, i will keep you updated.
Click to expand...
Click to collapse
So in that case ,you don't have to go back to stock?
I'm rooted but S-On... does that affect the process?
Should I turn S-Off first?
( too many questions I know?... not noob tho...just new to HTC dev)
How do u change the DPI for muktiwindoe? I see no option in settings
---
Can anyone post some screenshots?
I reset my M9 to the latest RUU and there is a minor update before Nougat, here's the captured OTA URL: http://fotadl.htc.com/OTA_HIMA_UL_M....35.617.21_release_486262q8itc31r2y2o2ht9.zip
Does anybody now if an update is available for Chinese Mate 9? something showed up today in my HiCare app about EMUI 8 but cant downloaded because quota has been reached.
I also want to know how to bypass this quota fill problem
nyinyinaylinn said:
I also want to know how to bypass this quota fill problem
Click to expand...
Click to collapse
You can not bypass it but there is another way to get the update. Check when they reset the quota. First come, first served.
/EDIT
No there is not. I have been checking every 30 minutesbecause i had night shift and my wife during the day. Nothing has been reset, always 0/20000.
Its a fake
Oreo updates
chorrohumo said:
You can not bypass it but there is another way to get the update. Check when they reset the quota. First come, first served.
/EDIT
No there is not. I have been checking every 30 minutesbecause i had night shift and my wife during the day. Nothing has been reset, always 0/20000.
Its a fake
Click to expand...
Click to collapse
Have you checked firmware finder to see if you could just download or install it through there? That might be a possibility
---------- Post added at 11:09 PM ---------- Previous post was at 11:01 PM ----------
chorrohumo said:
You can not bypass it but there is another way to get the update. Check when they reset the quota. First come, first served.
/EDIT
No there is not. I have been checking every 30 minutesbecause i had night shift and my wife during the day. Nothing has been reset, always 0/20000.
Its a fake
Click to expand...
Click to collapse
Have you checked firmware finder to see if you could just download or install it through there? That might be a possibility, I saw MHA-AL00 8.0.0.334 (C00) there so that might be the official update, if you check firmware access and it says approved for installation then it's the official update.
revjamescarver said:
Have you checked firmware finder to see if you could just download or install it through there? That might be a possibility
---------- Post added at 11:09 PM ---------- Previous post was at 11:01 PM ----------
Have you checked firmware finder to see if you could just download or install it through there? That might be a possibility, I saw MHA-AL00 8.0.0.334 (C00) there so that might be the official update, if you check firmware access and it says approved for installation then it's the official update.
Click to expand...
Click to collapse
Yes i did, using MHA-AL00 and MHA-AL00C00 and none of them work. I can download the files but when i chec firmware access it says "not approved for installation". I wrote to the chinese support because of the HICare where you can see the quote of 20.000 but its always 0/20.000 i have tried every hour, hoping it will be reset and the quote will return to 20.000/20000 but nothing. Its a fake in my eyes. I guess they want to wait a few weeks/month before they release Oreo for the Mate 9 because to be honest, if Oreao would be available already for the Mate 9, there is no reason to buy the Mate 10, specially for those who have the MHA.AL00.
---------- Post added at 11:02 AM ---------- Previous post was at 10:53 AM ----------
Can i download the files, unlock the bootloader , install TWRP and then the files, and after finished the installation lock the bootloader again to get rid of the warning every time i boot
I just updated my mate 9 al00 via hicare i just updated also hicare via hisuite then i installed the new firmware
ilbambino said:
Does anybody now if an update is available for Chinese Mate 9? something showed up today in my HiCare app about EMUI 8 but cant downloaded because quota has been reached.
Click to expand...
Click to collapse
I checked in Hi-Care right now and there where 234/20.000 free so i started it and its running, 44% downloaded of 2.59GB. Great, i can't believe it.
---------- Post added at 10:19 PM ---------- Previous post was at 10:17 PM ----------
adamabournafa said:
I just updated my mate 9 al00 via hicare i just updated also hicare via hisuite then i installed the new firmware
Click to expand...
Click to collapse
How it comes your MHA-AL00 has only 64GB Memory and 4GB RAM?
/EDIT
Went great. My phone is now on Oreao but some gogle services do not work as gmail.
chorrohumo said:
Yes i did, using MHA-AL00 and MHA-AL00C00 and none of them work. I can download the files but when i chec firmware access it says "not approved for installation". I wrote to the chinese support because of the HICare where you can see the quote of 20.000 but its always 0/20.000 i have tried every hour, hoping it will be reset and the quote will return to 20.000/20000 but nothing. Its a fake in my eyes. I guess they want to wait a few weeks/month before they release Oreo for the Mate 9 because to be honest, if Oreao would be available already for the Mate 9, there is no reason to buy the Mate 10, specially for those who have the MHA.AL00.
---------- Post added at 11:02 AM ---------- Previous post was at 10:53 AM ----------
Can i download the files, unlock the bootloader , install TWRP and then the files, and after finished the installation lock the bootloader again to get rid of the warning every time i boot
Click to expand...
Click to collapse
You'll have to install using HWOTA. Just flashing in TWRP won't do anything.
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Bootloader will lock when you've finished installing, so no need to relock manually.
guess quota was reset, downloading it now
Can not add my google account or any account. sucks
/EDIT
OK managed it. Nice
It shows quota full for me. I have a L29 rebranded to AL00. How's the update situation for you guys.
finished update without any issues, kinda love it already but will give it couple of days to check performance and battery life, not sure if rebranded will take OTA updates
ilbambino said:
finished update without any issues, kinda love it already but will give it couple of days to check performance and battery life, not sure if rebranded will take OTA updates
Click to expand...
Click to collapse
I just had minor issues with gogle but as usual, when i bought it there was not a single gogle app installed. But now everything works. Whats not so nice is that the yellow pages are the chinese ones, food delivery the same etc. The food will be cold until i have it in my hands
So youu guys got the updte through the quota system, not the system update way?
Astra1 said:
So youu guys got the updte through the quota system, not the system update way?
Click to expand...
Click to collapse
That's right, using Hi Care, couldn't be easier. I was a little upset because the context menu did not work but it was just because it had been reset to the default launcher. I use NOVA because i love to touch any app and a menu opens offering me: uninstall, remove, setup etc. That was the mayor reason to change to Nougat because i really loved Marshmallow. But now everything works fine, Gmail etc. I am happy. My wife is upset because she has the Samsung S8 and they will not release an update to OREO until it comes with the S9. I would never again buy me a Samsung mobile.
My google Play store did not work anymore, uninstall the one you have and use this one
https://forum.xda-developers.com/showthread.php?t=1996995
works like a charm
I upgraded to oreo through hicare. When I checked for update , it said no limit.
And how can we change region on hicare?
diam_84 said:
And how can we change region on hicare?
Click to expand...
Click to collapse
under settings look for region select asia pacific and then country china them save
This update for AL00 its the final version? No beta?
IOmega666 said:
This update for AL00 its the final version? No beta?
Click to expand...
Click to collapse
I believe so
New update has dropped. Version P-MR2-RC001-RZR-190914.3123 and brings the phone up to September 5th for security updates.
I have the update pending but I don't want to download just yet to ensure compatibility with Arter97's kernel. If the WiFi is really better then I might jump on regardless because that's my primary issue at this point. Can anyone confirm either the kernel works or the WiFi is noticably better?
OTA-URL:
https://android.googleapis.com/packages/ota-api/razer_aura_cheryl2/741344047df2f17f6adbe97f7e45a9471037da6f.zip Global
AlexBodewig said:
I have the update pending but I don't want to download just yet to ensure compatibility with Arter97's kernel. If the WiFi is really better then I might jump on regardless because that's my primary issue at this point. Can anyone confirm either the kernel works or the WiFi is noticably better?
Click to expand...
Click to collapse
Compatibility hasn't been confirmed yet, but previous discussions with someone who had an AT&T version that was on a July update had issues with arter97's kernel on September's update. The kernel seemed to be incompatible as it failed to boot and also switched the phone back to the old slot afterwards.
Extracted payload.bin:
https://drive.google.com/drive/folders/1bmPGWDAD3DtqNAMrDn0IGfGLB_HyFVeH
---------- Post added at 10:23 ---------- Previous post was at 10:21 ----------
This seems to be a differential update, as the boot.img is 1/4 of the normal size. I thought, I could patch it with magisk... [emoji53]
the_brad said:
Extracted payload.bin:
https://drive.google.com/drive/folders/1bmPGWDAD3DtqNAMrDn0IGfGLB_HyFVeH
---------- Post added at 10:23 ---------- Previous post was at 10:21 ----------
This seems to be a differential update, as the boot.img is 1/4 of the normal size. I thought, I could patch it with magisk... [emoji53]
Click to expand...
Click to collapse
It seems to be the case as the images are rather small. I'm not sure what to do now that I'm on Havoc OS GSI. Is there a possible way to patch stuffs other than system (such as vendor)?
I'm yet to make a backup as the current app I use for backup (Migrate) doesn't appear to work properly on this phone (while it worked on my previous one, Xperia XZ Premium), and that Titanium Backup hasn't been updated to be compatible with new features (such as split apks) so some backups can no longer work properly after restoring.
I also need to know if there were any improvements regarding Bluetooth compatibility. Currently I cannot use my bluetooth headset on GSI (only phone calls work), even with a modded overlay (with values changed to undo Razer's crippling of certain features such as aptX).
EDIT: I guess it's not that easy as the payloads are most likely block-based OTAs. These updates do not tolerate any changes on the partitions unlike file-based OTAs that we used to have. We'll have to wait for full factory images to come out and make a list of what we really need to flash from stock updates...
Any issues with the update etc please lmk everyone!
Enjoy it!
Rox598 said:
Any issues with the update etc please lmk everyone!
Enjoy it!
Click to expand...
Click to collapse
Not exactly an issue, but can you tell us, when razer will push the factory-image for this new update? That would make things mich easier...
the_brad said:
Not exactly an issue, but can you tell us, when razer will push the factory-image for this new update? That would make things mich easier...
Click to expand...
Click to collapse
Wish I knew!
But I can say to them that people are wanting the factory images if no major issues are present I can't see why it wont be up there but that's me.
I tried updating but it gives me an error everytime.
(Using the Deodoxed version)
Can someone help me with this ?
So trying to game plan here. Logic tells me to flash boot, vendor, and system from factory image of current build. Then let the system update itself. Then flash arter kernel, then go into twrp and flash latest magisk zip to get root.
Is this update still Android 9 or is this taking us to android 10?
---------- Post added at 08:35 PM ---------- Previous post was at 08:34 PM ----------
the_brad said:
OTA-URL:
https://android.googleapis.com/pack.../741344047df2f17f6adbe97f7e45a9471037da6f.zip Global
Click to expand...
Click to collapse
And this .zip file you linked.... Can we flash this in TWRP or is this the standard OTA that needs stock recovery?
mattwheat said:
Is this update still Android 9 or is this taking us to android 10?
Click to expand...
Click to collapse
---------- Post added at 08:35 PM ---------- Previous post was at 08:34 PM ----------
It's this:
is this the standard OTA that needs stock recovery?
Click to expand...
Click to collapse
the_brad said:
mattwheat said:
Is this update still Android 9 or is this taking us to android 10?
Click to expand...
Click to collapse
---------- Post added at 08:35 PM ---------- Previous post was at 08:34 PM ----------
It's this:
Click to expand...
Click to collapse
I'm trying to read between the lines here Brad but I'm not picking up what you're putting down.
mattwheat said:
Is this update still Android 9 or is this taking us to android 10?
---------- Post added at 08:35 PM ---------- Previous post was at 08:34 PM ----------
And this .zip file you linked.... Can we flash this in TWRP or is this the standard OTA that needs stock recovery?
Click to expand...
Click to collapse
This is the standard OTA that needs stock recovery & the update is still Android Pie/9
Also, for anyone that's curious, it doesn't seem to fix any of the speaker phone/call quality issues currently present in Android Pie/9 (but weren't present in Oreo). I can't speak to Wi-fi performance improvements, or other fixes mentioned in the update notice, but I am very thankful that Razer has released this OTA with security patches through September of 2019 ? ?. Thank you Razer!
Wifi
The WiFi is fixed for wifi calling I believe if you put this phone into airplane mode and trying wifi calls it would glitch the wifi out before now seems to work
I think I'll wait to install it until someone else who is more educated in this tests it and makes a guide for it to put stock back on and whatever we need to do to make Arter 97 kernel work with it.
Any fixes to the camera apk?
Razer 2 Global MR2 Sept 2019 Release Magisk Root
I got root on MR2 Build Global from this thread on Page 7 Thank to khaled1881 and the The_brad
https://forum.xda-developers.com/razer-phone-2/how-to/help-root-update-mr2-t3973483
new update
AlexBodewig said:
I have the update pending but I don't want to download just yet to ensure compatibility with Arter97's kernel. If the WiFi is really better then I might jump on regardless because that's my primary issue at this point. Can anyone confirm either the kernel works or the WiFi is noticably better?
Click to expand...
Click to collapse
i reflashed the stock firmware and ran the update to get the latest security update. I also have arter97 r11 kernel installed and magisk and have it rooted with no problems. Google Pay works as well as I was able to get it to pass the CTC scan.