Deleted.
turkkilainenpippuri said:
Hi!
I would like to create a boot animation that uses the basic J5 bootloop.
I would need you to convert the .qmg to .png and send to me. It's very simple with this app created by @xperiacle (Original thread). I would do it myself but the ROM used to convert the file must be either stock or stockish to work and I would lose so many settings, tweaks etc. by flashing stock and then back. As a reward I would of course hit the thanks button, send you the animation (if you please) and honor you as my savior for life! :angel: Also if you have an idea or reasonable preference(s) for the boot animation, I will make it happen.
Anyways here are the instructions stolen from the original thread (don't kill me xperiacle!):
"So just download the app(Qmg2Png), install, and pick an apk(Extract_this.apk) from sdcard and the app will extract the qmg resources and convert them to png format and saving them in the QMg2Png folder in the sdcard. The output folder retains the folder structure of the extracted apk."
Thank you in advance! Peace! :good:
Click to expand...
Click to collapse
If you want the stock boot animation then download the relevant firmware and pull it out of the system.img.
Please don't ask me to guide you how as there are plenty already out there.
ashyx said:
If you want the stock boot animation then download the relevant firmware and pull it out of the system.img.
Please don't ask me to guide you how as there are plenty already out there.
Click to expand...
Click to collapse
It's in the .qmg format. There is no other way to extract it that I know of. Bootanimation.zip? No problem. Qmg? Pain in the ass.
Edit: just to be clear the stock rom uses an encoding/decoding method for qmg files that don't exist in custom roms nor is it used by any other than samsung phones. But anyhow it is not the end of the world for me if I don't get it extracted. Then I just focus on some other ideas for animations.
turkkilainenpippuri said:
It's in the .qmg format. There is no other way to extract it that I know of. Bootanimation.zip? No problem. Qmg? Pain in the ass.
Edit: just to be clear the stock rom uses an encoding/decoding method for qmg files that don't exist in custom roms nor is it used by any other than samsung phones. But anyhow it is not the end of the world for me if I don't get it extracted. Then I just focus on some other ideas for animations.
Click to expand...
Click to collapse
It's in the stock system image. All you need do is extract it.
@ashyx You just don't get it.. I have already extracted it from the system img. I need to convert the qmg to png files to edit it. Read my posts more carefully to understand.
turkkilainenpippuri said:
@ashyx You just don't get it.. I have already extracted it from the system img. I need to convert the qmg to png files to edit it. Read my posts more carefully to understand.
Click to expand...
Click to collapse
OK let me ask you this?
What is preventing yourself from making a backup of your device with twrp which literally takes minutes, install the rom you require, do what you need and then simply restore?
@ashyx You are right but I don't want to flash any rom since when I do, I get this weird issue with my screen; I am unable to turn it off and it seems to be a matter of luck to get it working again. Thank you anyways! https://forum.xda-developers.com/galaxy-j5/help/screen-help-t3585090
Related
I've changed bootanimations before on other devices, but the file was always called "bootanimation.zip." Looking at the files in the SGS5, I see 3 different "boot*.qmg" files, but no "bootanimation.zip."
Since we don't have a custom recovery yet, I'm hesitant to rename the *.qmg files and drop in a "bootanimation.zip" I created for my SGS4 into the same folder. Is there some new way to replace bootanimations on an SGS5 due to the *.qmg file extension, or it's safe to just rename/delete the *.qmg files and drop in the "bootanimation.zip" file into the appropriate folder?
I'd hate to get stuck in a bootloop and have to odin back to stock only to be unable to fully "restore" my phone's settings afterwards (yes, I have TiBu & other apps that'll allow me to restore, but it's certainly not as easy or as complete as restoring a nandroid backup).
Icculus760 said:
I've changed bootanimations before on other devices, but the file was always called "bootanimation.zip." Looking at the files in the SGS5, I see 3 different "boot*.qmg" files, but no "bootanimation.zip."
Since we don't have a custom recovery yet, I'm hesitant to rename the *.qmg files and drop in a "bootanimation.zip" I created for my SGS4 into the same folder. Is there some new way to replace bootanimations on an SGS5 due to the *.qmg file extension, or it's safe to just rename/delete the *.qmg files and drop in the "bootanimation.zip" file into the appropriate folder?
I'd hate to get stuck in a bootloop and have to odin back to stock only to be unable to fully "restore" my phone's settings afterwards (yes, I have TiBu & other apps that'll allow me to restore, but it's certainly not as easy or as complete as restoring a nandroid backup).
Click to expand...
Click to collapse
Follow these instructions. Enjoy.
Misterxtc said:
Follow these instructions. Enjoy.
Click to expand...
Click to collapse
Thank you very much for the direction. While I'll give it a shot a later, that still won't allow me to replace the default bootanimation w/ the ones I've previously created. The bootanimation.zip files I want to use only contain *.png files (the *png's are in "part0" folder and there is a desc.txt file in the parent directory). There are no *.qmg files in those zip's to extract, so that process won't work for me & the bootanimations I'm trying to use.
Any other ideas, or is my only option to use something like the Samsung Theme Designer process? (http://forum.xda-developers.com/showthread.php?t=2696914)
Icculus760 said:
Thank you very much for the direction. While I'll give it a shot a later, that still won't allow me to replace the default bootanimation w/ the ones I've previously created. The bootanimation.zip files I want to use only contain *.png files (the *png's are in "part0" folder and there is a desc.txt file in the parent directory). There are no *.qmg files in those zip's to extract, so that process won't work for me & the bootanimations I'm trying to use.
Any other ideas, or is my only option to use something like the Samsung Theme Designer process? (http://forum.xda-developers.com/showthread.php?t=2696914)
Click to expand...
Click to collapse
Contact the maker of the OP of the thread with the boot animations, I'm pretty sure he/she can help you out converting the files. It's been done before in that thread.
Misterxtc said:
Contact the maker of the OP of the thread with the boot animations, I'm pretty sure he/she can help you out converting the files. It's been done before in that thread.
Click to expand...
Click to collapse
What the heck, man. Stop helping me so quickly! :laugh:
Thanks again!!
Dear brothers :
I installed a custom ROM for my phone samsung Galaxy young GT-S5360
Dedicated Roman Information :
ROM Name:
Hyperion - Titan of the East
Build number:
Hyperion.DXLF2
I did not like the icons
How do I change the entire Icons
You experience a number of applications such as :
ICON CHANGER PRO
Did not do any good
Mentioned application does change the icons and put a shortcut on the desktop
I do not want this
I want to change application icons on the home screen
How so .?
Decompile the application you want to change the icon of with apk tool
You can see what the icon name is in the Android manifest
The icon itself will be located in res/drawable-ldpi
An easier way might be to download an icon pack (search the theme section)
Then open the Flashable zip & find the app name you are looking for - open that folder & put the image you want in there replacing the image in the folder (rename your image to match the one you are replacing)
Then flash it in cwm with system mounted
marcussmith2626 said:
Decompile the application you want to change the icon of with apk tool
You can see what the icon name is in the Android manifest
The icon itself will be located in res/drawable-ldpi
An easier way might be to download an icon pack (search the theme section)
Then open the Flashable zip & find the app name you are looking for - open that folder & put the image you want in there replacing the image in the folder (rename your image to match the one you are replacing)
Then flash it in cwm with system mounted
Click to expand...
Click to collapse
Excuse me, my brother I do not
speak English fluently And it will
help me in the search within the
site I hope you can explain to me
way more steps And a civilian, if
possible, the programs needed
Excuse me, my brothers again
Google to invoke the interpreter
brought to you my problem Found
in another section of this issue :
http://forum.xda-developers.com/showthread.php?t=1699249
Is this Cevedna.? I want to install the
original Android Icons The
Samsung Galaxy S3 Icons How do
I install it.?
abdoosman said:
Excuse me, my brothers again
Google to invoke the interpreter
brought to you my problem Found
in another section of this issue :
http://forum.xda-developers.com/showthread.php?t=1699249
Is this Cevedna.? I want to install the
original Android Icons The
Samsung Galaxy S3 Icons How do
I install it.?
Click to expand...
Click to collapse
download that icon pack
open it with winrar or any other unzipper
goto the unpack folder
in there you will find a list of folders that relate to the applications - eg Calendar
open the res folder and replace the image in there with the one you want making sure your image has the same file name as the one you are replacing
once done delete any folders to apps you dont want to replace
flash the zip in cwm with system mounted
marcussmith2626 said:
download that icon pack
open it with winrar or any other unzipper
goto the unpack folder
in there you will find a list of folders that relate to the applications - eg Calendar
open the res folder and replace the image in there with the one you want making sure your image has the same file name as the one you are replacing
once done delete any folders to apps you dont want to replace
flash the zip in cwm with system mounted
Click to expand...
Click to collapse
My brother Before this I did the
following: You download the file
icons You are logged on a recovery
mode You have downloaded or so
to flashing Profile Icons have not
changed I noticed something:
Download file icons by recovery is
not complete Viz: The phone
automatically reboots itself does
not go to me after the download
screen recovery and which ones I
choose reboot system now What is
the problem.?
Do you have a video explaining the
way.?
abdoosman said:
Do you have a video explaining the
way.?
Click to expand...
Click to collapse
No - its pretty self explainitory
Unzip & replace images in the zip within the folder relating to the app
I'm sure you could search YouTube yourself for videos
marcussmith2626 said:
No - its pretty self explainitory
Unzip & replace images in the zip within the folder relating to the app
I'm sure you could search YouTube yourself for videos
Click to expand...
Click to collapse
Can I do that by applying Root
xplor.? You unzip the file icons by
applying x-plore And I saw the
images inside folders icons which I
want Question: Are these icons
suitable for all Romat or only
official ROMs.?
abdoosman said:
Can I do that by applying Root
xplor.? You unzip the file icons by
applying x-plore And I saw the
images inside folders icons which I
want Question: Are these icons
suitable for all Romat or only
official ROMs.?
Click to expand...
Click to collapse
you will need to be rooted
you can unzip the zip with any unzipper and rezip once done
you then flash the zip in cwm with system mounted
the rom will need to be de-odexed
marcussmith2626 said:
you will need to be rooted
you can unzip the zip with any unzipper and rezip once done
you then flash the zip in cwm with system mounted
the rom will need to be de-odexed
Click to expand...
Click to collapse
I could not do anything
Down the phone
You go to recovery
You run CWM
I installed icons file
Returned the phone automatically
Icons have not changed Is this correct way.?
Excuse me, my brother That were
not correct,
please media the right
steps to be numbered 1, 2, 3 .....
And the extent of links to software
do I need
Thank you
abdoosman said:
I could not do anything
Down the phone
You go to recovery
You run CWM
I installed icons file
Returned the phone automatically
Icons have not changed Is this correct way.?
Excuse me, my brother That were
not correct,
please media the right
steps to be numbered 1, 2, 3 .....
And the extent of links to software
do I need
Thank you
Click to expand...
Click to collapse
I'm guessing you didn't mount system before flashing the zip
Remember you also need to be rooted & most likely need to be deodexed (most custom roms are already)
marcussmith2626 said:
I'm guessing you didn't mount system before flashing the zip
Remember you also need to be rooted & most likely need to be deodexed (most custom roms are already)
Click to expand...
Click to collapse
Excuse me, my brother
You multiplied
Phone by Root
Question:
Is it when I Btflish icons of file
recovery and lift off the phone will
change the icons directly or are
there other steps need to be
made.?
abdoosman said:
Excuse me, my brother
You multiplied
Phone by Root
Question:
Is it when I Btflish icons of file
recovery and lift off the phone will
change the icons directly or are
there other steps need to be
made.?
Click to expand...
Click to collapse
Read all my previous posts - I can't make it clear other than to say root - mount system in cwm - then flash zip
Change what ever images you want inside the zip keeping file names the same
If you can't understand - I'm sorry I cannot help you
marcussmith2626 said:
Read all my previous posts - I can't make it clear other than to say root - mount system in cwm - then flash zip
Change what ever images you want inside the zip keeping file names the same
If you can't understand - I'm sorry I cannot help you
Click to expand...
Click to collapse
Thank you brother
Finally able to
be installed
Thank you
Excuse me
if you multiplied So if science
student
Thank you
Hi guys!
Ok. so I'm (really) not a developer, I'm just trying to make a flashable ZIP (+ custom recovery and root) from the latest D80230f_00.kdz (told you, not a dev', but, yeah, everyone should starts with something right?). and I got some difficulties at the end of the process: when trying to flash the zip file, I got a big red error (ok, just red) in TWRP: "E: failed to sysMapFIle /sdcard/rom_name.zip".
Have you ever met this error?
Furthermore, I got a question about the update-binary file (maybe it's link to the error?): I've downloaded @somboons KK_template_new.zip, but their was already an update-binary file in it. I've unziped the archive, write everything I need in the updater-script, and re-zip all (see attachments), I don't do anything except ziped all: should I do something else such as sign the archive or thing like this? 'cause I don't find anything accurate about update-binary file: I don't know if we have to take it from other archive, or if it's create during signing the archive.
Oh, yeah, the recovery.img is TWRP 2.8.7.1.
Anyway, all kind of help will be very appreciate.
Thanks in advance guys !
@casual_kikoo
I would ask a mod to move your post to the Q&A where it belongs
I'm not sure if they move them or delete threads when they're not in the right sub forums.
Lawlrus said:
@casual_kikoo
I would ask a mod to move your post to the Q&A where it belongs
I'm not sure if they move them or delete threads when they're not in the right sub forums.
Click to expand...
Click to collapse
Oh ok so I post in wrong place... I was..sure :crying: ...
Thanks!
casual_kikoo said:
Hi guys!
Ok. so I'm (really) not a developer, I'm just trying to make a flashable ZIP (+ custom recovery and root) from the latest D80230f_00.kdz (told you, not a dev', but, yeah, everyone should starts with something right?). and I got some difficulties at the end of the process: when trying to flash the zip file, I got a big red error (ok, just red) in TWRP: "E: failed to sysMapFIle /sdcard/rom_name.zip".
Have you ever met this error?
Furthermore, I got a question about the update-binary file (maybe it's link to the error?): I've downloaded @somboons KK_template_new.zip, but their was already an update-binary file in it. I've unziped the archive, write everything I need in the updater-script, and re-zip all (see attachments), I don't do anything except ziped all: should I do something else such as sign the archive or thing like this? 'cause I don't find anything accurate about update-binary file: I don't know if we have to take it from other archive, or if it's create during signing the archive.
Oh, yeah, the recovery.img is TWRP 2.8.7.1.
Anyway, all kind of help will be very appreciate.
Thanks in advance guys !
Click to expand...
Click to collapse
Whenever u flash a zip for it needs to be signed, I would check or Ayysir's Android Kitchen, that's where I started my development from, I started just like u, only modifying touchwiz roms and repackaging them in flushable zoos format with android kitchen, if u need help let me know
P.S., Windows is NOT the platform to start development on lol, if I were u I'd start dual booting whatever machine ur using with a Linux OS of ur choice, for someone new like urself, I'd go with Ubuntu
Sent from my Nexus 6 using Tapatalk
soupysoup said:
Whenever u flash a zip for it needs to be signed, I would check or Ayysir's Android Kitchen, that's where I started my development from, I started just like u, only modifying touchwiz roms and repackaging them in flushable zoos format with android kitchen, if u need help let me know
P.S., Windows is NOT the platform to start development on lol, if I were u I'd start dual booting whatever machine ur using with a Linux OS of ur choice, for someone new like urself, I'd go with Ubuntu
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
First of all, thanks you so much for your fast answer. Yeah, I know Windows isn't the easiest platform to start development. Well, I've already have Ubuntu installed on VMWare, I just took screenshots on Windows .
Ok, so if I understood well, update-binary file is created during the signing step? That's why it doesn't work right now, 'cause I don't signed my ZIP.... Yeah ok I start to understand !
I'm gonna download Android Kitchen (this one right?) and start cooking !
Again, thanks you so much dude you make me more and more enthusiast about creating ROMs on Android.
So my favorite boot animation by far is the one that comes with NucleaRom, but I need to use a different rom. Could someone point me in a direction to extract the bootanimation from a certain rom and flash it on my current system? Was surprised to not find a guide to help me already.
A2017U
Lots of ba threads in theme forum.
lafester said:
Lots of ba threads in theme forum.
Click to expand...
Click to collapse
Read through them. Not what I'm looking for
Amer532 said:
extract the bootanimation from a certain rom and flash it on my current system?
Click to expand...
Click to collapse
@Amer532 ... Use a root empowered File Manager to go to /system/media and there you will find the current "bootanimation.zip" file. Copy it to a folder on your external sdcard then when you load your new rom, again go to /system/media and replace the existing file "bootanimation.zip" with the one you previously saved to your ext sdcard. That should do the trick. I should stress that the A2017U is a finiky device so I don't take any responsibility for anything that goes wrong. :fingers-crossed:
metpolds said:
@Amer532 ... Use a root empowered File Manager to go to /system/media and there you will find the current "bootanimation.zip" file. Copy it to a folder on your external sdcard then when you load your new rom, again go to /system/media and replace the existing file "bootanimation.zip" with the one you previously saved to your ext sdcard. That should do the trick. I should stress that the A2017U is a finiky device so I don't take any responsibility for anything that goes wrong. :fingers-crossed:
Click to expand...
Click to collapse
Ok thank you now I understand that the rom has to be installed to get to that "bootanimation.zip". Thanks for clearing that up for me XD
I had 50pc japan version of s5(sc-04f), installed rom 'G900F.STOCK.FOR.SCL23.FULL.MINHQUAN'. The downside of this rom is that its pre-rooted. I managed to unroot it by goin in supersu & click 'full-unroot'. But i had multiple devices to flash, so is there a way for me to re-pack this firmware again after i unroot it? So that i could flash it to my other devices without root.
wee2000 said:
I had 50pc japan version of s5(sc-04f), installed rom 'G900F.STOCK.FOR.SCL23.FULL.MINHQUAN'. The downside of this rom is that its pre-rooted. I managed to unroot it by goin in supersu & click 'full-unroot'. But i had multiple devices to flash, so is there a way for me to re-pack this firmware again after i unroot it? So that i could flash it to my other devices without root.
Click to expand...
Click to collapse
Your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=2700073
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
ok done, thx 4 the info
just in case if i missed the reply there, hope someone could reply me here?
when i extract the ZIP file, i got
METE-INF folder
boot.img
system.img
just in case if i missed the reply there, hope someone could reply me here?
when i extract the ZIP file, i got
METE-INF folder
boot.img
system.img
wee2000 said:
just in case if i missed the reply there, hope someone could reply me here?
when i extract the ZIP file, i got
METE-INF folder
boot.img
system.img
Click to expand...
Click to collapse
Should we search for this firmware or you can provide a link to its thread?
the link is here : https://choimobile.vn/threads/6-0-1-scl23-stock-rom-g900f-full-port-v3-by-huaminhquan93.37412/
wee2000 said:
the link is here : https://choimobile.vn/threads/6-0-1-scl23-stock-rom-g900f-full-port-v3-by-huaminhquan93.37412/
Click to expand...
Click to collapse
Generally, if it's 6.0.1 and rooted systemlessly, you need to replace boot.img with a stock one and remove SuperSU app from system.img.
This ROM intended to be flashed from TWRP, so it's an ext4 image.
You can mount it to a linux system on your PC and remove anything you want.
I havent done anything like this before. Could u give me some links or guides? My PC is running Windows 10.
wee2000 said:
I havent done anything like this before. Could u give me some links or guides? My PC is running Windows 10.
Click to expand...
Click to collapse
Ok, here' a simpler way:
1. Make changes on one phone.
2. Make a TWRP backup of boot and system partitions.
3. Restore this backup on other phones. They must have TWRP installed, a 6.0.1 bootloader and modem.
You'll have to rename backup's folder path and to wipe cache/data/system before restore.
can i use winrar to extract & compile the rom, without linux? So that i will have a much faster flashing process for all other units..
wee2000 said:
can i use winrar to extract & compile the rom, without linux? So that i will have a much faster flashing process for all other units..
Click to expand...
Click to collapse
Ok, I've managed to download that ROM at last.
The things look even simpler.
To prepare an "unrooted" ROM:
1. Download the zip form this post and unpack updater-script somewhere.
2. Make a copy of V3.G900F.STOCK.FOR.SCL23.FULL.MINHQUAN.zip, open it with Windows Explorer and replace V3.G900F.STOCK.FOR.SCL23.FULL.MINHQUAN.zip\META-INF\com\google\android\updater-script with the file you've unpacked from the attachment.
3. Try to flash ans see if it's what you need.
thx so much, already passed all units to the buyer. ill try that on next batch restock, may iknow if there's a way to get the service menu shortcode *#0*# to work again? This rom doesn't has the service menu.
bbsc said:
Ok, I've managed to download that ROM at last.
The things look even simpler.
To prepare an "unrooted" ROM:
1. Download the zip form this post and unpack updater-script somewhere.
2. Make a copy of V3.G900F.STOCK.FOR.SCL23.FULL.MINHQUAN.zip, open it with Windows Explorer and replace V3.G900F.STOCK.FOR.SCL23.FULL.MINHQUAN.zip\META-INF\com\google\android\updater-script with the file you've unpacked from the attachment.
3. Try to flash ans see if it's what you need.
Click to expand...
Click to collapse
I've replaced the updater-script in the zip file, but supersu is still there