Note:
This is not bootanimation, this is the splash screen (the Mi' boot logo which is displayed when device is switched ON)
This is for Redmi 4A/4 Only..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Redmi 4A/4 (any ROM)
2. Terminal Emulator app
STEPS to create & flash splash.img:
Same procedure as in here:
[GUIDE] How to Create Custom Splash Screen (Boot Logo) for Redmi 2/3
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Thanks to @karantamboli who provided stock splash.img of Redmi 4A..
Hi. If I converte a splashscreen image via gimp, what would be the image settings?
Custom Bootloader image and Splash Logo..
Flashable zip : https://drive.google.com/file/d/0BxPVo9bN1AVAUHNEU3J1STh3cTA/view?usp=sharing
Splash Image Flash Through Bootloader ( CMD: fastboot flash splash spalsh.img) For Reboot (fastboot reboot) :
https://drive.google.com/file/d/0BxPVo9bN1AVANGY2cVh2dEN4UTg/view?usp=sharing
I was looking for this since last week. Please upload more flashable files with screnshot plz
Unable to flash it through twrp
i tried to flash it but my logo comes only for a second and then it gets replaced by the stock logo (note i have a custom ROM and have different boot video ) fastboot logo is fine it works
I tried too and had the same result, only fastboot works.
I also tried to flash a custom logo, but I didn't use the .bat file because I'm using a linux OS. I searched to find a linux version of the script but I found only a request in another device' s thread with no answer from the creator of the tool. So I tried to use the commands from .bat file. I used "cat" command to join the files which I found that is equivalent to "copy /b" and the "720x1280_header.img" which provided, but it didn't work. I get only af small penguin icon for both fastboot and splash which I suppose is the linux kernel' s default splash. For fastboot I used the "fastboot.img" which also provided, so doesn't seems that is the image I made problem.
Doesn't Work! Atleast must update the thread.
[email protected] said:
i tried to flash it but my logo comes only for a second and then it gets replaced by the stock logo (note i have a custom ROM and have different boot video ) fastboot logo is fine it works
Click to expand...
Click to collapse
smurfisrael03 said:
Doesn't Work! Atleast must update the thread.
Click to expand...
Click to collapse
If boot logo gets instantly replaced by the stock one, use this modified version by PG:
https://forum.xda-developers.com/showpost.php?p=75994298&postcount=9
Worked perfectly on my (updated) 4A.
nice
Related
I'm following the
hxxp://android-dls.com/wiki/index.php?title=HOWTO:_Unpack%2C_Edit%2C_and_Re-Pack_Boot_Images
guide to build a recovery.img.
It works fine to edit the ramdisk and rebuild with mkbootfs and mkbootimg. Until I flash it and boot up in recovery it stays on the green android splash and it is not fastboot mode. So I was wondering if there's some more to it. If I need a "--base [address]" or something else.
pls answer
Note:
This is not bootanimation, this is the splash screen (the 'Zuk' boot logo which is displayed when device is switched ON)
This is for ZUK Z2 / Z2 Pro Only ..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Zuk Z2/Pro (any ROM)
2. Terminal Emulator app installed.
STEPS to create splash.img:
Before proceeding, make sure fastboot is setup properly in your computer (just incase something goes wrong)..
It's not yet tested by anyone.
1. Make sure you have a 1080x1920 picture in PNG format.
2. Download & Extract this: Zuk_Z2_Splash_Logo_Maker.zip
3. Now rename your picture as logo.png & replace it inside "pics" folder of the extracted folder.
(Similarly you can replace battery.png and usb.png if you wish)
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img , which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
1. Transfer the splash.img to your device's Internal Storage.
2. Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
(You can also flash from fastboot as given below)
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from fastboot like:
Code:
fastboot flash splash splash.img
Credits:
1. @GokulNC (myself ) who wrote this script.
2. Modified from my tool here: [GUIDE] How to Create Custom Splash Screen (Boot Logo) for Redmi 2 & Redmi 3
Hit the Thanks :good: button if it worked for you
Don't forget to post here the custom splash screens that you made, since others may find it useful
Qa
thanks @GokulNC for this tutorial
some roms also have a special image for the "starting apps" screen. can this be changed too?
@GokulNC, thank you for your tool.
I want to change Warning message for unlocked bootloader with custom picture. I remember there was some way for Motorola phones: https://forum.xda-developers.com/2015-moto-g/themes-apps/remove-unlocke-bootloader-message-t3177801
Is it possible to use this way for Zuk Z2?
I'd like to find solution but I don't know how to unpack splash.img.
By the way to flash splash we must use the following command:
Code:
fastboot -i 0x2b4c flash splash splash.img
wyt18 said:
some roms also have a special image for the "starting apps" screen. can this be changed too?
Click to expand...
Click to collapse
Nope, that's ROM specific.
Check the ROM's source to find where it is. IDK
.: SID :. said:
I want to change Warning message for unlocked bootloader with custom picture. I remember there was some way for Motorola phones: https://forum.xda-developers.com/2015-moto-g/themes-apps/remove-unlocke-bootloader-message-t3177801
Is it possible to use this way for Zuk Z2?
I'd like to find solution but I don't know how to unpack splash.img.
Click to expand...
Click to collapse
In their case, it was present in the logo partition itself.
But in your case, it guess it's in the bootloader (it was not present in splash partition).
GokulNC said:
In their case, it was present in the logo partition itself.
But in your case, it guess it's in the bootloader (it was not present in splash partition).
Click to expand...
Click to collapse
Is it possible to change it then?
I've noticed that when I powere on phone It shows quickly splash, then warning about unlocked bootloader, after this splash again and at last bootanimation.
So where should I dig?
.: SID :. said:
Is it possible to change it then?
I've noticed that when I powere on phone It shows quickly splash, then warning about unlocked bootloader, after this splash again and at last bootanimation.
So where should I dig?
Click to expand...
Click to collapse
As i said, it's in the bootloader partition (maybe named 'aboot' or something; find it out yourself).
However, it's not recommended to modify the bootloader, since it might brick your device, even if it displaces by a single byte..
GokulNC said:
Note:
This is not bootanimation, this is the splash screen (the 'Zuk' boot logo which is displayed when device is switched ON)
This is for ZUK Z2 / Z2 Pro Only ..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Zuk Z2/Pro (any ROM)
2. Terminal Emulator app installed.
STEPS to create splash.img:
Before proceeding, make sure fastboot is setup properly in your computer (just incase something goes wrong)..
It's not yet tested by anyone.
1. Make sure you have a 1080x1920 picture in PNG format.
2. Download & Extract this: Zuk_Z2_Splash_Logo_Maker.zip
3. Now rename your picture as logo.png & replace it inside "pics" folder of the extracted folder.
(Similarly you can replace battery.png and usb.png if you wish)
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img , which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
1. Transfer the splash.img to your device's Internal Storage.
2. Open Terminal Emulator & enter the following to flash itYou can also flash from fastboot as given below)
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from fastboot like:
Credits:
1. @GokulNC (myself ) who wrote this script.
2. Modified from my tool here: [GUIDE] How to Create Custom Splash Screen (Boot Logo) for Redmi 2 & Redmi 3
Hit the Thanks:good: button if it worked for you
Don't forget to post here the custom splash screens that you made, since others may find it useful
Click to expand...
Click to collapse
Nice guide, it will for sure be helpful for a lot of people
Can anyone plz make a splash.img with this logo:angel:
how to flash it via fastboot it says cant load splash.img
---------- Post added at 12:38 PM ---------- Previous post was at 12:25 PM ----------
getting battery icon after flashing it instead of logo
i am getting a battery.png for my logo.png
Does this work with lenovo z2 plus?
dr.bathman said:
Does this work with lenovo z2 plus?
Click to expand...
Click to collapse
Sure.
sergsinger said:
Sure.
Click to expand...
Click to collapse
Cool.. thanks..
[email protected] said:
i am getting a battery.png for my logo.png
Click to expand...
Click to collapse
me too
While offline charging, no picture (or logo) has been visible in a splash made by this program. @GokuINC kindly look into this matter. Thanks.
dr.bathman said:
While offline charging, no picture (or logo) has been visible in a splash made by this program. @GokuINC kindly look into this matter. Thanks.
Click to expand...
Click to collapse
Is visible in mine. Checked?
Rishi2906 said:
Is visible in mine. Checked?
Click to expand...
Click to collapse
Not checked yet..
@GokulNC can you please tell how to unpack these img to png or jpg so I can make modifications?
Thank you for the tutorial!
Here is mine.
Note:
This is not bootanimation, this is the splash screen (the 'Lenovo' boot logo which is displayed when device is switched ON)
This is for Lenovo Vibe K5 Only..
For Lenovo Vibe K5 PLUS, click here..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Lenovo Vibe K5 (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Download & Extract this: Vibe_K5_Splash_Maker.zip
2. Make sure you have a picture in PNG format with resolution 720x1280px.
3. Now rename your picture as logo.png & replace it inside "pics" folder of the extracted folder.
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Thanks to @_eMdzeJ_ who provided the stock splash.img of Vibe K5 (A6020a40)..
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
How to run CREAT_LOGO.bat ??
dr.bathman said:
How to run CREAT_LOGO.bat ??
Click to expand...
Click to collapse
Doing click.:crying::crying:
Black lenovo splash screen (bootlogo) twrp flashable zip for vibe k5..
Link: https://mega.nz/#!q54BjAzJ!UlWxurpt0Ns6RLAw-dVKlhuTOjfbLTa1hxE3uEPxmbE
Will this work on an A6020a40 (SD616)?
Droidge said:
Will this work on an A6020a40 (SD616)?
Click to expand...
Click to collapse
If screen resolution is same, it should work.
Phone stuck on boot logo
GokulNC said:
Note:
This is not bootanimation, this is the splash screen (the 'Lenovo' boot logo which is displayed when device is switched ON)
This is for Lenovo Vibe K5 Only..
For Lenovo Vibe K5 PLUS, click here..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Lenovo Vibe K5 (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Download & Extract this: Vibe_K5_Splash_Maker.zip
2. Make sure you have a picture in PNG format with resolution 720x1280px.
3. Now rename your picture as logo.png & replace it inside "pics" folder of the extracted folder.
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Thanks to @_eMdzeJ_ who provided the stock splash.img of Vibe K5 (A6020a40)..
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Click to expand...
Click to collapse
i followed entire procedure on my vibe k5.. but i guess its for k5 plus only cuz boot logo is bigger and not the one i made... its blue lenovo unlike previous green lenovo.. now i am stuck on boot logo... i tried flashing stock splash.img provided by you using twrp recovery but it doesnt work... plz help me...:crying::crying::crying::crying::crying:
Hi, sorry for my bad English.
I have a problem, when the smartphone starts it appears a small logo of the penguin of linux and not the image that I have placed. I tried it in all three ways and I had the same result.
Note:
This is not bootanimation, this is the splash screen (the 'Mi' boot logo which is displayed when device is switched ON)
This is for Xiaomi Mi Max 2 Only (Snapdragon Devices)..
(For other devices, please send me your splash.img so that I can create a tool for you too.)
Requirements:
1. Rooted Xiaomi Mi Max 2 (any ROM)
2. Terminal Emulator app or custom recovery or fastboot.
STEPS to create & install splash.img:
Click here for procedure
(It's the same procedure as that for Xiaomi Mi 5)
Note:
For devices with the latest Nougat firmware, the splash screen is no longer loaded from the splash.img..
Instead, it gets loaded from the logo.img ..
The latest logo.img from @greddy seems to have 6 pictures, each in RBG24 format.
For Mi 5, @Cynob has created a tool for Mi 5 Nougat firmware here (for 5pics): https://forum.xda-developers.com/mi-5/how-to/modified-splash-img-dont-try-logo-t3604134..
You may try to extend it for 6 pictures for Mi Max2.. If you do so, pls tell me, so that I'll link this post to the post that you create..
(I'm a little busy these days, so I'm sorry, I'll do create the tool from scratch when I find time)
Thanks to @greddy who provided the stock splash.img of Mi Max 2.
Hit the Thanks :good: button if it worked for you
GokulNC said:
Thanks to @greddy who provided the stock splash.img of Mi Max 2.
Hit the Thanks :good: button if it worked for you
Click to expand...
Click to collapse
is there an limit in resolution for the logo.jpg ? Now my logo.jpg is 400kb (1920x1080px) , the maker creates an splash.img with 6mb and when
i flash it nothing happen, its always the Mi Logo with the unlocked info below.
greets, Peter
anyone have successfully change the boot logo for the mi max 2 ?
Greets, Peter
My splash screen became just a penguin in the middle of the screen, i cant seem to change it even by flashing new ones via your tutorial. Please help
NexusPhreak said:
My splash screen became just a penguin in the middle of the screen, i cant seem to change it even by flashing new ones via your tutorial. Please help
Click to expand...
Click to collapse
the same here ... i ask allready .. no one can help
NexusPhreak said:
My splash screen became just a penguin in the middle of the screen, i cant seem to change it even by flashing new ones via your tutorial. Please help
Click to expand...
Click to collapse
greddy said:
the same here ... i ask allready .. no one can help
Click to expand...
Click to collapse
Hey, flashing the stock splash.img should fix the problem..
As of now, I don't have the latest splash.img that is supported by your latest firmware.
If you can send your latest stock splash.img, I'll try to create a tool for it
And BTW, I'm very sorry for my late replies, I just saw all the replies in this thread
GokulNC said:
Hey, flashing the stock splash.img should fix the problem..
As of now, I don't have the latest splash.img that is supported by your latest firmware.
If you can send your latest stock splash.img, I'll try to create a tool for it
And BTW, I'm very sorry for my late replies, I just saw all the replies in this thread
Click to expand...
Click to collapse
Please do it!
Attached files from latest global beta 29.3.18 splash.img and logo.img
GokulNC said:
Hey, flashing the stock splash.img should fix the problem..
As of now, I don't have the latest splash.img that is supported by your latest firmware.
If you can send your latest stock splash.img, I'll try to create a tool for it
And BTW, I'm very sorry for my late replies, I just saw all the replies in this thread
Click to expand...
Click to collapse
That's what I exactly did, thanks btw!
Hello! could someone do a standard google splash screen for mi max2, preferably for installation through twrp.
Not working on my device
Flashing the splash image didn't change anything.
I think flashing the logo should work.
Anybody please develop Logo maker for mi max 2.
Hello,
I need a help to fix a issue with splash image, when I flash stock rom (nougat) then the system loads fine with splash image with unlocked o non unlocked bootloader. But the problem is when I flash another custom rom or another stock rom like oreo or pie. Any system loads fine but the splash image dissapear or not show, so I see a black screen until boot animation appears on screen.
I don't know what happen with that.
On twrp 3.2 with terminal I put his dd if=/sdcard/persist.img of=/dev/block/mmcblk0p19 and then I reboot system, so it apears this is the location to the splash img, I think.
I've searched on all google website and can't find any solution and here.
¿It's possible that the location of the splash is not the correct block location? or maybe the problem is diferent ...
izeus83 said:
Hello,
I need a help to fix a issue with splash image, when I flash stock rom (nougat) then the system loads fine with splash image with unlocked o non unlocked bootloader. But the problem is when I flash another custom rom or another stock rom like oreo or pie. Any system loads fine but the splash image dissapear or not show, so I see a black screen until boot animation appears on screen.
I don't know what happen with that.
On twrp 3.2 with terminal I put his dd if=/sdcard/persist.img of=/dev/block/mmcblk0p19 and then I reboot system, so it apears this is the location to the splash img, I think.
I've searched on all google website and can't find any solution and here.
¿It's possible that the location of the splash is not the correct block location? or maybe the problem is diferent ...
Click to expand...
Click to collapse
why not try to flash another splash from fastboot?
there are several posts with good splashes, they should work
Reft309 said:
why not try to flash another splash from fastboot?
there are several posts with good splashes, they should work
Click to expand...
Click to collapse
Thanks for reply Reft309, so I tried to do both scenarios in twrp with zip file and from fastboot with img file but not success
There's something wrong with this.
u should reflash rom
why you dd persist img I didn't understand
persist is not the splash logo you can find splash.img in stock firmware just flash it with Fastboot or make a flashable zip
or if you want dd cmd and not sure about block partition then write it like "dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash"