Database Users

Ideos X5 CD-ROM and Read-Only Problem (Little Donate Award)

My U8800 appears as a READ-ONLY CD-ROM drive when it's connected through USB. "The USB Storage Is In Use Screen" is on.But i can't write anything my sdcard or internel card.
Under device manager, it shows up as Android Adapter USB Device
I tried : MIUI , Oxygen , CM7 but same reason
And I use CWM 4
What can i do about this ?
If someone tells me how to solve this problem, I will donate him $10
Thanks Everbody

Read only CD-Rom
yugey said:
My U8800 appears as a READ-ONLY CD-ROM drive when it's connected through USB. "The USB Storage Is In Use Screen" is on.But i can't write anything my sdcard or internel card.
Under device manager, it shows up as Android Adapter USB Device
I tried : MIUI , Oxygen , CM7 but same reason
What can i do about this ?
Sorry for my bad english
Thanks Everbody
Click to expand...
Click to collapse
Hi there. This is my first reply to a problem. I think i have it figured out.
Check this:
Menu -> Settings -> Applications -> Development:
On this screen make sure USB debugging is unchecked.
When you plug the phone into your computer, then a dialog should pop up on your phone asking you to enable USB storage mode. Tap "Turn on USB storage".
It may ask you to confirm. Tap "OK".
Good luck. I hope that helps you.

deofavente said:
Hi there. This is my first reply to a problem. I think i have it figured out.
Check this:
Menu -> Settings -> Applications -> Development:
On this screen make sure USB debugging is unchecked.
When you plug the phone into your computer, then a dialog should pop up on your phone asking you to enable USB storage mode. Tap "Turn on USB storage".
It may ask you to confirm. Tap "OK".
Good luck. I hope that helps you.
Click to expand...
Click to collapse
I tried this, the same thing happens again, but thanks anyway

deofavente said:
Hi there. This is my first reply to a problem. I think i have it figured out.
Check this:
Menu -> Settings -> Applications -> Development:
On this screen make sure USB debugging is unchecked.
When you plug the phone into your computer, then a dialog should pop up on your phone asking you to enable USB storage mode. Tap "Turn on USB storage".
It may ask you to confirm. Tap "OK".
Good luck. I hope that helps you.
Click to expand...
Click to collapse
It's very much difficult than that. Well the only way to restore your usb problem is going back to stock and after that you only can install a 2.2 custom rom, after you switch to 2.3 your problem will appear again! If you go to "device manager" on windows when U use 2.2, U see that the phone is corrected installed, but when u connect with 2.3 rom, the device it's not corrected installed and therefore only mounted as CD-ROM... I know that, 'cause I have the same problem and tried all this options. I installed usb drivers that huaei give us on their site, but the problem persists. I tried with both CWM recoveries and both work good on 2.2, stock or custom, but not on 2.3....
Last but not least, go check your imei on system, almost sure U got a 0 on that too, as me. So this is some problem with 2.3 roms that "f*cked up" our phone. Altough usb problem is reversible when installed stock rom, the problem with the imei persists after a stock rom install...
Hope it help some people somehow!
(sorry for bad bad english)

Try uninstalling device drivers, then reinsert the phone and let it install.
What do you see on the CD rom? The sdcard contents?

Hello if you are with cm7, go to definitions - about phone and project menu. Testes other options for usb.
Sent from my U8800 using XDA App

Blefish said:
Try uninstalling device drivers, then reinsert the phone and let it install.
What do you see on the CD rom? The sdcard contents?
Click to expand...
Click to collapse
I uninstalled my android device's drivers but when i plug the u8800 on my pc , my pc automatically install driver
Yes i see my sdcard in the cdrom.

nrdl said:
Hello if you are with cm7, go to definitions - about phone and project menu. Testes other options for usb.
Sent from my U8800 using XDA App
Click to expand...
Click to collapse
I'm tested other options
Now I see My Working R/W SDCARD and CD-ROM Device.
Where is Internal Storage ?

I have the same issue now, seems to be the problem with CM7.

Blefish said:
I have the same issue now, seems to be the problem with CM7.
Click to expand...
Click to collapse
Did U read what I say? It's common to all 2.3 roms, i never used cm7 and have the same problem
yugey said:
I'm tested other options
Now I see My Working R/W SDCARD and CD-ROM Device.
Where is Internal Storage ?
Click to expand...
Click to collapse
Did U check your IMEI? Please confirm that, 'cause If U have IMEI=0 and usb problem as me or other guy I know, maybe the problems are related to each other, and forget easy options, i tried almost everything, almost sure that when install 2.3 roms. it changes some values and the phone goes nuts, 'cause if you use 2.2 it works correctly as a normal usb device!

Snake_boss, same here...
Imei 0
Cd-rom when usb connecting
When turning wifi on i get system boot and after this i get ERROR message
Tested with cm7, oxygen and miui
Everything works perfect with stock rom or Flb (the one I user now)
Sent from my U8800 using XDA App

snake_boss said:
Did U read what I say? It's common to all 2.3 roms, i never used cm7 and have the same problem
Did U check your IMEI? Please confirm that, 'cause If U have IMEI=0 and usb problem as me or other guy I know, maybe the problems are related to each other, and forget easy options, i tried almost everything, almost sure that when install 2.3 roms. it changes some values and the phone goes nuts, 'cause if you use 2.2 it works correctly as a normal usb device!
Click to expand...
Click to collapse
My IMEI number isn't 0 , my IMEI number is true.

snake_boss said:
Did U read what I say? It's common to all 2.3 roms, i never used cm7 and have the same problem.
Click to expand...
Click to collapse
I did, but it worked in Oxygen and MIUI. I bet they're all using genokolars github device, which might be buggy.
Sent from my IDEOS X5 using Tapatalk

yugey said:
I'm tested other options
Now I see My Working R/W SDCARD and CD-ROM Device.
Where is Internal Storage ?
Click to expand...
Click to collapse
Blefish said:
I did, but it worked in Oxygen and MIUI. I bet they're all using genokolars github device, which might be buggy.
Sent from my IDEOS X5 using Tapatalk
Click to expand...
Click to collapse
mine only works with 2.2, every 2.3 have the problem to me!

I know this is an old topic, but I have the same problem: USB shows up as a CD Drive and IMEI is 0. Does anybody know a fix for this?

[Q&A] Hyperion 7 Project Help & Support (Share & try Solved any Problem)

Hi There, this is my First Post in here, before i have account but cant access them, because i cant access my email so sad but forget that !
now
Part of Hyperion Project by CarlDeanCatabay
Help and Support Section ​
In this thread, i want share my experience with Hyperion ROM by CarlDeanCatabay that ROM so smooth and fast i think
So, This A few My Experiance.....
Instalation Problem
I see a member is dificult to installing ROM Hyperion7GM but now i try to share how to instal 98,8% Success
Before, some member has tell to installing, i think same with my methode like webconnect methode
Click to expand...
Click to collapse
First
* If You have Custom Rom before, Flash into StockROM with Odin (recomended)
* Make sure to Fresh sdcard just format 2nd partition
* Save the Hyperion7GMFinal.zip into sdcard
* Finish installing StockROM, go to Recovery mode not CWM ? right
* Press Power+Menu+Vol Up go to Stock Recovery
* Wipe Data & Reset *(Stock Recovery Mode)
* Wipe Cache *(Stock Recovery Mode)
* Select Zip from sdcard and choose Hyperion ROM 7GM
* Wait to instal and Reboot Your Phone
It take some minute 2 - 5 minute i don't know because i take so looong but i guess it luck !
Internet Problem
Can't access some website like (mediafire) with any browser like stock browser or 3rd Browser like (Dolphin, Ninesky)
Click to expand...
Click to collapse
I think this problem come with Host file on system, remember ? Carl Posting on first page ?
Mother of all HOSTS - more than 27,000 servers blocked
Blocks ADs
Blocks banners
Blocks 3rd party cookies
Blocks 3rd party page counters
Blocks web bugs
Blocks hi-jackers
Blocks phising sites
Blocks Malwares
Blocks Spywares
Blocks Trackers
Blocks un-authorized application connection
Click to expand...
Click to collapse
On this...
so i try to delete host file on system file, and all works
Before this, search file *Hosts* on other site or with other hosts file stock or anything on other customrom
This My Methode 99% Work
First..
* Using Rootex go to System Folder
* go to folder System > etc
* Find File *HOSTS* file maybe file large (8MB)
* Replace with other HOSTS file, and dont forget change permission to RWRR
Reboot Your phone, and try to browsing again
or see carl update post method on First page Hyperion.
WIFI Problem ?
Just Change and look Setting > Wifi Setting > touch Menu > Advance
You will see a wifi sleep policy and you can modify this or change but in this case, i think wifi is good, no have problem
Battery Stats ?
Where i can see a battery stats on Hyperion ROM ?
Click to expand...
Click to collapse
Dont worry if you want check a battery stats you can access with this method
* Go to HomeScreen and Create Shortcut
* Choose Setting Shortcut and choose again app battery stats
* just touch the battery stats icon if you want see hehe
So, you must explore before, thanks
UPDATE NEW
Firstly Im very well shocked looking new hyperion update and now I want share how to install hyperion Pre 7.x with my method cause, I looking this is very well hardly to install hehe
I'll show you how to avoid stuck or bootloop when installing ROM, so check this out
Firstly in my SDCARD have some zip file
*Hyperion pre 7.x
*aromaFile Manager <Here>
What you must do to install ?
* Flash your SGY to stockrom
* Go to Recovery mode not CWM right
* Also wipe data & cache
* Instal Hyperion Pre 7.x
* wait for instal
* Finish, dont reboot your phone, you must check your system file with aromafile manager whether in the Hyperion file system is mounted or not, if there is no or only boot.img file and bmunlock in the system, try to repeat the first step
* dont wipe data or cache, just instal hyperion zip file, and then has finish,
* if you want, you can check again with aromaFM and it will displayed some file in system folder
* then, reboot your phone
it luck 99,6% with me :victory:
UPDATE NEW
Hyperion 7.x
Simple Instalation
- Goto Recovery Mode
- Go to CWM recovery
- always wipe cache & data
- Wait for afew second
- done, restart.
Click to expand...
Click to collapse
Enjoy with Hyperion 7.x :good:
** When you plug your phone to pc or nb it will ring
And some screenshoot will adding in attachfile

good job sir, nice ide.
Thanks before.

sandyworsnop said:
good job sir, nice ide.
Thanks before.
Click to expand...
Click to collapse
Yuop bro, cause i think some people is very interest about Hyperion rom but so dificult to instal on their phone

I installed and it worked well. First I can connect to wifi but can't surf though, but after reboot 1 time, everything is fine. But now, I can't even connect to wifi, though I had rebooted so many times. Anyone can help? Should I flash other kernel like someone said or just wait for someone to fix the bug?
Thank you very much and sorry for my bad English

thunderyellow said:
I installed and it worked well. First I can connect to wifi but can't surf though, but after reboot 1 time, everything is fine. But now, I can't even connect to wifi, though I had rebooted so many times. Anyone can help? Should I flash other kernel like someone said or just wait for someone to fix the bug?
Thank you very much and sorry for my bad English
Click to expand...
Click to collapse
Congrats....
Why change kernel ? i think savie is good and fast and about wifi cant conect i don't know why because in my phone is good well
not say fix the bug but try to explore the ROM and ask the Carl about their ROM for advance

Dr.oidbio said:
Congrats....
Why change kernel ? i think savie is good and fast and about wifi cant conect i don't know why because in my phone is good well
not say fix the bug but try to explore the ROM and ask the Carl about their ROM for advance
Click to expand...
Click to collapse
Because someone said that he fixed that bug by changing to Savie 's 73 kernel, but I still want to stick with the default kernel of Hyperion, it 's also from Savie too, but Carl said it was specially for Hyperion or something like that guess I should wait then

thunderyellow said:
Because someone said that he fixed that bug by changing to Savie 's 73 kernel, but I still want to stick with the default kernel of Hyperion, it 's also from Savie too, but Carl said it was specially for Hyperion or something like that guess I should wait then
Click to expand...
Click to collapse
Yes, the best choice is waiting Carl is the ROM maker we just wait for next update

Any fix for randomly rebooting at a period of time ?

rmhoh said:
Any fix for randomly rebooting at a period of time ?
Click to expand...
Click to collapse
Thanks YourWell
i think you must or just hehe just setup your Governor and I/O Schedule on Setting tab
and i guess, using SmartassV2 and Sio is good tweek
and using 832 - 312 frek if you want stable user
and if want save a battery but keep fast not fastest just use 624 - 312
Its my Method and experience dont blame me

I can't use Data Connection anymore, unlike 2 days ago. Please help me :/

unable to start
I downloaded this rom and installed it in a usual method by using download menu and selecting update via sd card....thereafter my galaxy y has not started up just showing the default boot screen of samsung galaxy y only and I am unable to get back in download mode need ur help

Excellent will come in handy for many ! thanks

net apps
why doesnt my whatsapp or other internet apps and browser doesnt works please tell me i need the solution urgently

timezone34 said:
I can't use Data Connection anymore, unlike 2 days ago. Please help me :/
Click to expand...
Click to collapse
Well ? If you using data connection, try to look at setting menu
Then, Choose mobile data » Look and check Mobile data, oh yea look at Access Point Name (APN) just choose same with your Cellular Network
mayurshah008 said:
I downloaded this rom and installed it in a usual method by using download menu and selecting update via sd card....thereafter my galaxy y has not started up just showing the default boot screen of samsung galaxy y only and I am unable to get back in download mode need ur help
Click to expand...
Click to collapse
It not downloading menu, download menu just for revert back to stockRom with odin, and using Stock Recovery to instal, but dont forget to wipe data, cache before flashing
nikufellow said:
Excellent will come in handy for many ! thanks
Click to expand...
Click to collapse
Haha just share what i know here, and im so swoscpiciuous you know ? Haha
Sent Using My Hands with GT-S5360

young soul said:
why doesnt my whatsapp or other internet apps and browser doesnt works please tell me i need the solution urgently
Click to expand...
Click to collapse
From what i must answer this
cause, if your phone can't connect to internet.
look at before post i think you must setup APN cause all custom rom come with random CSC

Just uping my question:
I can't use Data Connection anymore, unlike 2 days ago. What solutions can I do?

Dr.oidbio said:
From what i must answer this
cause, if your phone can't connect to internet.
look at before post i think you must setup APN cause all custom rom come with random CSC
Click to expand...
Click to collapse
what should i put to mms or wap ???
i dont know about so much about APN:crying: and all that stuff so plzz help me

timezone34 said:
Just uping my question:
I can't use Data Connection anymore, unlike 2 days ago. What solutions can I do?
Click to expand...
Click to collapse
Look my last post, if same problem about apn, look this post and bfore post
young soul said:
what should i put to mms or wap ???
i dont know about so much about APN :crying: and all that stuff so plzz help me
Click to expand...
Click to collapse
Choose Wap or 3G apn not mms setting
If this not helping you, im so sorry but i guess im not wrong haha
Sent Using My Hands with GT-S5360

root
can you help me? i install merruk kernel in hyperion but when i install again savies my phone is unroot :crying: and i dont know if i can root the phone with the same method that is described in this post http://forum.xda-developers.com/showthread.php?t=1675474 or i have to flash a stock rom and root again in stock???? thanks

stock on samsung galaxy Y logo
i did everything the instruction said i wipe data, cache and also in the advance and also i mount the 4 of them but still i am stock on logo my phone won't boot up. i also flash stock ROM before i flash hyperion i also check if the file is not damage. what is wrong anyone please help?

[TOOL] rkBreakout v1.2 -- HUAWEI Ascend W1 jailbreak tool

It's dangerous if you don't know what it is.
You must read every instructions in the tool carefully.
I don't guarantee that I'll answer every questions about this tool.
W1-C00 and W1-U00 are both supported. W1-U34 is not confirmed, but it should be same as W1-U00 in theory.
XP is not supported, you need Vista and above system.
Tested only on China ROM GDR 0/1/2/3, but all ROMs are compatible in theory. If something wrong, post your phone's version and ROM version.
Only universal homebrew xap will work. Anything use Samsung service won't work.
Click to expand...
Click to collapse
If you messed up everything and don't know how to fix, try this to get your phone alive.
http://forums.wpcentral.com/huawei-ascend-w1/229445-those-who-get-their-w1-market-locked-china.html
Features (part):
Interop Unlock
Xap CAPs Unlock
Camera shutter sound option
Wifi static IP option
Map2SD
MTPRoot
Sorry for my bad English in translation of this tool.
rkBreakout v1.2e Build 2014.04.07:
View attachment rkbreakout_v1.2.zip
Click to expand...
Click to collapse

Reserved

some little corrections to your translation, if you don't mind.
2. This tool may corrupt your device and void your warranty, use it at your own risk. The author has made best efforts on this tool to avoid these risks, but the author cannot be held responsible for any damages to your phone. If your device is corrupted, the author will not provide any service or guide to repair.
5. This tool is NOT a ROM-Flashing tool, so all your data is preserved after jailbreak.
Hope I could help.

is there a bootloader fix option for w1-U34(GDR1 Windmobile-Canada ) . I tried your app with both u00 and c00 options andIt shows the phone in device manager and in step 4 "Phone Connected". But in step 5 it shows waiting for phone to restart, With an error message " Image download Failed. Cookie (if Present) not Received. Could you add an option of this model too, or is there a way to change it from u34 to u00.
P.S on a sidenote Great job on the app its pretty easy to use, I do get an error when I open it runtime error '53' - File not found, after I click ok opens the app not sure if im missing something or its a problem with the app

Any Huawei apps with Interop caps are possible to install like Memory managment?

Suhaib10 said:
is there a bootloader fix option for w1-U34(GDR1 Windmobile-Canada ) . I tried your app with both u00 and c00 options andIt shows the phone in device manager and in step 4 "Phone Connected". But in step 5 it shows waiting for phone to restart, With an error message " Image download Failed. Cookie (if Present) not Received. Could you add an option of this model too, or is there a way to change it from u34 to u00.
P.S on a sidenote Great job on the app its pretty easy to use, I do get an error when I open it runtime error '53' - File not found, after I click ok opens the app not sure if im missing something or its a problem with the app
Click to expand...
Click to collapse
Currently W1-U34 is not supported because partition struct is unknow.
Runtime error is a small bug, fixed, thanks.
djtonka said:
Any Huawei apps with Interop caps are possible to install like Memory managment?
Click to expand...
Click to collapse
No, Storage Manage need driver by Huawei. AFAIK only Russian ROM has driver support it.

You should details this jailbreak, most users do not know what expect after it. Anything new on menu, visible an partition hided before or Interop etc

djtonka said:
You should details this jailbreak, most users do not know what expect after it. Anything new on menu, visible an partition hided before or Interop etc
Click to expand...
Click to collapse
It's fun for users that finding new stuff by themselves. Actually only a little things have been changed after jailbreak.

Doing now 2nd time and have perform HR again due to stocking on black screen after booting and your logo.

reker said:
Currently W1-U34 is not supported because partition struct is unknown.
.
Click to expand...
Click to collapse
well if there is anything I can do to help u find out, let me know ill be more than happy to help.
also is there a way to backup my current rom (stock).

Suhaib10 said:
well if there is anything I can do to help u find out, let me know ill be more than happy to help.
also is there a way to backup my current rom (stock).
Click to expand...
Click to collapse
Post 'About' on your phone, I need hardware and cpu model
W1-U34_1030.5614.46900.20900.USA-Channel.rar:
http://pan.baidu.com/s/1o6LkhN8

Reker is samething wrong with it, always got black screen while after booting and Huawei logo. Only after HR the phone is booting properly but is nothing missing after it?

djtonka said:
Reker is samething wrong with it, always got black screen while after booting and Huawei logo. Only after HR the phone is booting properly but is nothing missing after it?
Click to expand...
Click to collapse
My mistake, an old test file was used in tool. I'll corret this in 30minutes
Edit:
Fixed, try again

Won't even start

djtonka said:
Won't even start
Click to expand...
Click to collapse
You mean the tool? I tried it's OK on my computer. Maybe upload problem? I use my server as a proxy to pack and upload.
I've packed again and reuploaded it

it is working like a charm now

reker said:
Post 'About' on your phone, I need hardware and cpu model
W1-U34_1030.5614.46900.20900.USA-Channel.rar:
http://pan.baidu.com/s/1o6LkhN8
Click to expand...
Click to collapse
Here you go even attached other stuff from HWdiag
I'll try that out that rom . Thanks

Suhaib10 said:
Here you go even attached other stuff from HWdiag
I'll try that out that rom . Thanks
Click to expand...
Click to collapse
U34 should be same as U00. You can try change a computer or reinstall QPST/Driver first. Some people said that 'cookie not present error could be fixed by using a winxp/another qpst windows driver'

reker said:
U34 should be same as U00. You can try change a computer or reinstall QPST/Driver first. Some people said that 'cookie not present error could be fixed by using a winxp/another qpst windows driver'
Click to expand...
Click to collapse
that could be the problem cause I was trying on Win 8 and it auto found the drivers didn't need to install them. I'll try it on XP later today.

Suhaib10 said:
that could be the problem cause I was trying on Win 8 and it auto found the drivers didn't need to install them. I'll try it on XP later today.
Click to expand...
Click to collapse
The driver should be installed manually, do not use the driver system auto provided.
Don't try XP, the tool do not support it

Anyone can backup firmware from TA-1003 ?

Please any make firmware backup from TA-1003 .so that we can flash it to TA-1000 .
Thanks

rian.w25 said:
Please any make firmware backup from TA-1003 .so that we can flash it to TA-1000 .
Thanks
Click to expand...
Click to collapse
I dont think its that easy

surya467 said:
I dont think its that easy
Click to expand...
Click to collapse
are using TA_1000 ?

rian.w25 said:
are using TA_1000 ?
Click to expand...
Click to collapse
Yes I have a TA-1000

surya467 said:
Yes I have a TA-1000
Click to expand...
Click to collapse
Are you from india ?

rian.w25 said:
Are you from india ?
Click to expand...
Click to collapse
yes

surya467 said:
yes
Click to expand...
Click to collapse
Great anyone can backup via adb

I am using Nokia 6 ( TA-1000 ) if need any help let me know please i also want to install Google play

rian.w25 said:
Great anyone can backup via adb
Click to expand...
Click to collapse
Will try that.

I've a TA-1003 with international ROM and Playstore. How do I create a flashable backup via ADB?

5T33Z0 said:
I've a TA-1003 with international ROM and Playstore. How do I create a flashable backup via ADB?
Click to expand...
Click to collapse
here is the info, please try it. May be that image can be used to update from "dload" folder on TA-1000, who knows !!
https://www.howtogeek.com/125375/ho...kup-without-rooting-or-unlocking-your-device/

kanakarkku said:
here is the info, please try it. May be that image can be used to update from "dload" folder on TA-1000, who knows !!
https://www.howtogeek.com/125375/ho...kup-without-rooting-or-unlocking-your-device/
Click to expand...
Click to collapse
Thanks for the info. Yesterday, I hooked the Phone up to my PC and installed the USB Driver, but strangely it is only recognized as an ADB Device if I select "ADB sideload" from the Recovery. But in Bootloader/Download Mode it does not show up if I enter "ADB Devices". All my other devices work fine with ADB, though. Had a look at the device manager and everything looks fine. I don't know how to fix this.

5T33Z0 said:
Thanks for the info. Yesterday, I hooked the Phone up to my PC and installed the USB Driver, but strangely it is only recognized as an ADB Device if I select "ADB sideload" from the Recovery. But in Bootloader/Download Mode it does not show up if I enter "ADB Devices". All my other devices work fine with ADB, though. Had a look at the device manager and everything looks fine. I don't know how to fix this.
Click to expand...
Click to collapse
I guess you need to unlock something under developer settings . You know what I mean

OEM unlock is enabled, as well as USB Debugging.

5T33Z0 said:
OEM unlock is enabled, as well as USB Debugging.
Click to expand...
Click to collapse
Keep connected to the pc and please restart your mobile.
Also try to force start it. I'm not understanding why you can't sideload adb? Could be that it's not rooted?

ADB works in Sideload, but not in Download Mode. In Device Manger another Android Device pops up after entering download mode. I dont have a Driver for that. Hmmm. Where can I find it?

5T33Z0 said:
ADB works in Sideload, but not in Download Mode. In Device Manger another Android Device pops up after entering download mode. I dont have a Driver for that. Hmmm. Where can I find it?
Click to expand...
Click to collapse
There are certain adb drivers that can be installed manually. The name usually supplied in/with the same folder. If you don't find send me your email address I think I have them somewhere

kanakarkku said:
here is the info, please try it. May be that image can be used to update from "dload" folder on TA-1000, who knows !!
https://www.howtogeek.com/125375/ho...kup-without-rooting-or-unlocking-your-device/
Click to expand...
Click to collapse
if the device were not rooted, then , you can only backup the installed stuff. cannot backup system data except rooted.

zorrol said:
if the device were not rooted, then , you can only backup the installed stuff. cannot backup system data except rooted.
Click to expand...
Click to collapse
Sounds logical. My idea behind my statement was, as "everything" is same on both TA-1000 & TA-1003 (except Google related restrictions on ta-1000), I was thinking just to replace "all" data on TA-1000. I don't know if the internal memory on mobile is able to notice anything??
With your statement I'm just thinking, what happens if I get some system "backup" file from ta-1003, and restore it on ta-1000?? Sounds stupid??

surya467 said:
I dont think its that easy
Click to expand...
Click to collapse
Hi bro i have ta 1003 in hand.

please help am newbie and stuck

i rooted my phone 1st time and now am really stuck. I had installed xxx rom and as it booted i got fc so i accidently wiped the whole rom and forgot that i dont have the external storage to flash the rom again. Now am stuck at twrp and it says no OS installed. Please help me how do i install the ROM again?

Download the full rom from here http://oxygenos.oneplus.net.s3.amaz...3_OTA_006_all_1801292021_96eade81793548e4.zip
And then put in internal storage via twrp on
And flash it via TWRP and you are back stock .

that is what the problem..how do i put on internal storage? while TWRP is on i can see the nothing no folders etc..and when i try to copy and paste the ROM..it nothing happens..or i cant even create a new folder.

ronak123456 said:
that is what the problem..how do i put on internal storage? while TWRP is on i can see the nothing no folders etc..and when i try to copy and paste the ROM..it nothing happens..or i cant even create a new folder.
Click to expand...
Click to collapse
Just format the data by going in additional format option and then type yes after that you would be able to transfer data from PC to phone .

Aarju said:
Just format the data by going in additional format option and then type yes after that you would be able to transfer data from PC to phone .
Click to expand...
Click to collapse
Thanks men you are a life saver

ronak123456 said:
Thanks men you are a life saver
Click to expand...
Click to collapse
Your welcome dude
I would suggest stick to the stock open beta 5 as it's a good optimised rom .

ronak123456 said:
Thanks men you are a life saver
Click to expand...
Click to collapse
stick with xXx and decrypted. Definitely the best ROM right now.

dladz said:
stick with xXx and decrypted. Definitely the best ROM right now.
Click to expand...
Click to collapse
Yes, it is good! But I m unable to use the K-klock as its giving me error! target application/overlay outdated or mismatched configuration selected. any idea?

ronak123456 said:
Yes, it is good! But I m unable to use the K-klock as its giving me error! target application/overlay outdated or mismatched configuration selected. any idea?
Click to expand...
Click to collapse
Nothing wrong with K-Manager, i'm using it now.

works perfectly