Hi,
I am on VNS-L31C437B371, nougat and whenever i install magisk my fingerprint settings and function disappear. I have got viper4android installed and am on elite kernel v5.1 with twrp recovery. Any help or advice would be very much appreciated. Thanks
If I remember correctly, Magisk is not supported with that kernel. You should either use stock kernel and root with the TWRP by @OldDroid or installa the RocateX ROM.
I have tried it with and without elite kernel but it doesn't work both times
Did you follow this guide to get Magisk?
Yes nougat is working perfectly.
Related
Hey everyone.
I try to install magisk on a European moto g4 (nougat, unlocked bootloader, stock). When I flashed magisk, the phone doesn't start. I can only boot into Fastboot. When I flash the stock boot.img there, the phone starts as normal. How can I flash magisk? Thanks in advance.
Magisk With Nougat
Using Custom ROM or Stock?? Resurrection Remix 5.8.2-20170414 offers magisk in itself.. U must try it out!
If you are in stock, install the ElementalX kernel
einhuman197 said:
Hey everyone.
I try to install magisk on a European moto g4 (nougat, unlocked bootloader, stock). When I flashed magisk, the phone doesn't start. I can only boot into Fastboot. When I flash the stock boot.img there, the phone starts as normal. How can I flash magisk? Thanks in advance.
Click to expand...
Click to collapse
You can't install magisk over the stock kernel. You have to flash TWRP first. I recommend twrp 3.1... by oadam11 You'll find it here https://forum.xda-developers.com/mo...7-1-1-ground-zero-roms-validus-tesla-t3553036 in the 2. post of the first page.
After that, you can install elementalx-kernel.
Then you're ready to install magisk.
It worked, thanks for the help everyone.
For those who got problems with installation on v13.1 use the following guide it will help you all links below its from official sites not mirrors etc.
Steps for make sure you're not confused
1)reboot to twrp recovery or cwm
2)install magisk uninstaller zip
3)install unroot kenzo zip
4)install magisk v13.1
5) reboot device
6) install magisk manager if not installed automatically
7) attention before you use it keep your boot.img as a backup to restore it if you are not going to use a custom kernel read below the edit why thanks
Ps.worked perfectly on Nougat NOS release latest beta with radon kernel 5.1 hope to work on your ROM too
EDIT:When you use the nitrogen unroot zip in restore the nos kernel by Nougat version so on Miui and other ROMS of course if you dont use custom kernel take a backup of your current kernel just the boot part or just install the custom kernel like radon,agni after the whole steps etc sorry about that it just took me a while to find out cuz I just checked my kernel adiutor and I just saw the wild kernel of nitrogen on performance gov and it burned my hand almost xd
UPDATE:Try this unroot zip file first it doesn't going to mess with your kernel amd change it but if that doesn't work you have to do it with tge other way thanks for understanding :')
-->Download link press here<--
Kenzo unroot by NOS site (worked in Nougat with radon 5.1)check the update please before use this zip file
magisk uninstaller from official link by @topjohnwu
magisk v13.1 by official link of @topjohnwu
magisk manager 5.0.4 from official link of @topjohnwu
1. CM/AOSP without root (or unroot)
2. Flash Magisk 13.1 (Magisk Manager included, no need to remove the old one if you are using)
3. Done
Archmage1809 said:
1. CM/AOSP without root (or unroot)
2. Flash Magisk 13.1 (Magisk Manager included, no need to remove the old one if you are using)
3. Done
Click to expand...
Click to collapse
I talk about people who got problem with installation about error 1 since all roms got root they have to use an unroot zip as I just saw only new halogen os doesn't include root dont pretend the smart boy you can just ignore the post
i have problem with miui 8 developer rom, stuck in boot loading although i have dirty flashed rom
solo player said:
i have problem with miui 8 developer rom, stuck in boot loading although i have dirty flashed rom
Click to expand...
Click to collapse
Flash the kernel again and the problem will be solved I just figured out something just now cuz my device burned my hand almost xd
After install install magisk v13.1, Do I need to install phh-superuser-magisk-r266-2.zip?
After install install MagiskManager-v5.0.4.apk, Do I need to install Superuser_1.0.3.3.apk?
magisk v13.1 by official link of @topjohnwu not works on MIUI 8.3.0.5(MHOMEID).. Already tried and stuck at MI logo..
xmixmaster said:
Flash the kernel again and the problem will be solved I just figured out something just now cuz my device burned my hand almost xd
Click to expand...
Click to collapse
sadly it didn't work for me i have to wait for fix or another wokaround
jerung3000 said:
After install install magisk v13.1, Do I need to install phh-superuser-magisk-r266-2.zip?
After install install MagiskManager-v5.0.4.apk, Do I need to install Superuser_1.0.3.3.apk?
Click to expand...
Click to collapse
No it will autoroot your phone just check the steps I writed and pay attention on update I did
solo player said:
sadly it didn't work for me i have to wait for fix or another wokaround
Click to expand...
Click to collapse
What rom you got?
xmixmaster said:
What rom you got?
Click to expand...
Click to collapse
miui 8 7.7.6 developer rom
Do we really need this guide? Lol
I have installed superuser how can I replace it to magisk as safteynet check doesn't pass on superuser after Xposed installation.
I flashed Nitrogen 2 based on Orio in Redmi Note 3. How i can install / flash magisk .?
I root the same with Supersu
the module that is listed is download section of magisk will work in all phone or on the specific phone that is mentioned there?
links are down:cyclops:
I tried all methods which are there on site but each time same and only problem is coming that is my phone is not getting rooted correctly I tried so many times but when I'll check with root checker it says it's not rooted but I successfully unlocked bootloader but I can't complely root it, can someone help me?
What device do you have and what ROM are you running?
If you're rooting on the stock Motorola ROM, do you have TWRP flashed/booted, then flashed ElementalX? Afterwards, what root managers are you using? You could try magisk 16 or 15.3. However, if you've previously used SuperSU or another root manager, you may have to re-flash the original stock kernel (then flash ElementalX then root) to remove any remainders of the old root managers, else they may interfere with magisk to the point of the root not being stable.
I have Moto g4 plus XT 1643 and I tried to root with by using twrp latest version and lineage os 14.1 athene. The was working fine but my phone is still showing that this device is not rooted
MsK96918 said:
I have Moto g4 plus XT 1643 and I tried to root with by using twrp latest version and lineage os 14.1 athene. The was working fine but my phone is still showing that this device is not rooted
Click to expand...
Click to collapse
What root manager are you using? The official Lineage OS (as of Jan 2017) does not come with a root manager, you must download and flash your own. You could either use the Lineage_SU_addon (you'd want the arm variant for 14.1) or magisk or SuperSU as a root manager.
I am new in this so I don't know that much details so can you help me by giving me link so that I can go through step by step and try to do what you are saying
MsK96918 said:
I am new in this so I don't know that much details so can you help me by giving me link so that I can go through step by step and try to do what you are saying
Click to expand...
Click to collapse
1)Download the Lineage SU addon (from here https://download.lineageos.org/extras - you want the arm 14.1 zip) OR magisk (from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 ) Only download one, please and if you want to switch, you ideally want to restore your backup or dirty flash the custom ROM to restore the Lineage kernel.
2)Reboot your device to TWRP.
3)In TWRP backup your device. Keep this backup safe.
4)In TWRP, go to 'Install' and flash the package you downloaded.
5)Wipe cache and Dalvik in TWRP after the flash.
6)Reboot.
7)Verify you have root.
You may also wish to browse the Lineage 14.1 thread for our device here: https://forum.xda-developers.com/moto-g4-plus/development/rom-cyanogenmod-14-1-t3522101 Please use the search function by the page numbers to quickly search the thread for information
echo92 said:
1)Download the Lineage SU addon (from here https://download.lineageos.org/extras - you want the arm 14.1 zip) OR magisk (from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 ) Only download one, please and if you want to switch, you ideally want to restore your backup or dirty flash the custom ROM to restore the Lineage kernel.
2)Reboot your device to TWRP.
3)In TWRP backup your device. Keep this backup safe.
4)In TWRP, go to 'Install' and flash the package you downloaded.
5)Wipe cache and Dalvik in TWRP after the flash.
6)Reboot.
7)Verify you have root.
You may also wish to browse the Lineage 14.1 thread for our device here: https://forum.xda-developers.com/moto-g4-plus/development/rom-cyanogenmod-14-1-t3522101 Please use the search function by the page numbers to quickly search the thread for information
Click to expand...
Click to collapse
Thank you bro i finally rooted my device correctly . It help alot thank you once again
Hi I'm new to XDA Forums, I was searching for posts about rooting my Moto g4 Plus. I would like to know Why we should flash a kernel before flashing SuperSU or Magisk ? Nb: I just only want the root access. Not in a plan to flash a custom rom. Thanks in Advance.
vinayroffl said:
Hi I'm new to XDA Forums, I was searching for posts about rooting my Moto g4 Plus. I would like to know Why we should flash a kernel before flashing SuperSU or Magisk ? Nb: I just only want the root access. Not in a plan to flash a custom rom. Thanks in Advance.
Click to expand...
Click to collapse
The stock Motorola kernel in stock Nougat ROMs appears to have anti rooting measures included (I think DM Verity?) If you attempt to root on this stock Nougat kernel, you'll likely soft brick/bootloop your device.
A custom kernel (e.g. elementalX v2.0.1 for stock) does not have these anti rooting defences, so it's safer to root with magisk. I would recommend magisk as super SU hasn't been updated in some time.
It appears that this need to flash a custom kernel before rooting applies to Nougat stock ROMs; marshmallow stock ROMs and the Oreo soak test stock ROM appear not to require a custom kernel.
As an aside, custom kernels and root are not necessary to flash custom ROMs. The only tools you require are an unlocked bootloader and the correct TWRP. The kernels included with these custom ROMs may also have anti rooting measures disabled, so it's safer to directly root without having to use a custom kernel.
History:
After I change the kernel I lost the root! Then I tried to update the Magisk to version 18 and the Magisk Manager to a most recent version that I don't remember its version.... But my phone continued without root.
Trying to solve this again I install Magisk 16.3 and Magisk Manager 5.6.4 downloading and installing the files available in this link: https://www.stechguide.com/download-magisk-v16-3/
Without success too!
-
So, darlings.
I'm asking for a tutorial to uninstall all the Magisk things of my phone (if you experts think it is necessary) and I'm asking for a tutorial to root again my phone with Magisk.
And I'm also asking to know the latest STABLE version of Magisk and of Magisk Manager COMPATIBLE with my phone and that will work well!
I have a Galaxy Note 3 (SM-N9005) with [ROM][C9 Pro Port][N900X] AspireTeam C9 Pro v5.0 [18.5.18][Aroma/Smooth/Modded] installed.
Thank you so much!!!
LeandritoG said:
History:
After I change the kernel I lost the root! Then I tried to update the Magisk to version 18 and the Magisk Manager to a most recent version that I don't remember its version.... But my phone continued without root.
Trying to solve this again I install Magisk 16.3 and Magisk Manager 5.6.4 downloading and installing the files available in this link: https://www.stechguide.com/download-magisk-v16-3/
Without success too!
So, darlings.
I'm asking for a tutorial to uninstall all the Magisk things of my phone (if you experts think it is necessary) and I'm asking for a tutorial to root again my phone with Magisk.
And I'm also asking to know the latest STABLE version of Magisk and of Magisk Manager COMPATIBLE with my phone and that will work well!
I have a Galaxy Note 3 (SM-N9005) with [ROM][C9 Pro Port][N900X] AspireTeam C9 Pro v5.0 [18.5.18][Aroma/Smooth/Modded] installed.
Thank you so much!!!
Click to expand...
Click to collapse
First, Magisk is one of the most documented tools on xda, has its own official forum and especialy its official releases on GitHub (where all versions are available). It's useless to get it elsewhere.
Second, Magisk will only do his magic on an already flashed kernel. If you flash kernel after Magisk, you won't get root.
Third, Magisk flashable zip contains the corresponding Manager and will inject it systematically.
Finaly, you need TWRP for a successful flash of Magisk. With other custom recoveries, errors like "can't find the boot image" can happens.
Now, for a complete removal of Magisk from the system, you only have to flash the latest official uninstaller.
After reboot, go to recovery, flash your prefered kernel then flash Magisk. The latest stable version is v18 and will work well on your rom.
...
Hi people!
I tried to unlock bootloader of my p9 lite
VNS-L31, android 7.0, stock emui 5.0.x
Got the code, unlocked, installed many twrps
to see wich was the best one to flash magisk 19.
All good, but everytime i did a magisk flash,
the phone didnt reboot properly.
(Got bootloop, sometimes got the reset phone screen entering a password {??} along with red errors in all twrps) im sure i did all correctly, this isnt the first time
I do a root on a smartphone... the point is:
I think that magisk is what causes these errors and
Forces me to hard reset the device to use it again (dload or huawey extractor)
i need magisk 19+ first because i need a systemless root, then i need many magisk modules
On my phone. Also tryed with custom rom based on
Emui 5.0.x through meticulus twrp 5.2, elite 3.1.1 twrp.
No way to install magisk without getting errors.
--- 》So if you guys could give me some tips to fix this issues, i would appreciate it so much. It could be my bad or maybe i need to do something else in order to get magisk working. 2 days trying, need help of the best modders here. Thanks in advance to all, and best regards from italy! :good: