Hello All
I've rooted and installed TWRP recovery. And accidently wiped all partitions (system, data, caches...). Currently no OS installed.
Tried installing Cyanogen mods and also default ROMs via TWRP but getting error saying
====
Unknown command "screenshot"
E: Unable to mount /spare
====
Also tried flashing default ROMs...same error . No luck.
Tried wiping all partitions again.
connected to my linux lap
Device is connected and listed while running command "lsusb". (USB data connection working)
But not detecting under adb devices also not shown under fastboot mode. (So no luck to flash via PC).
All forums saying "check usb debugging" to show under adb devices. How can I ..if there is no ROM
Also TWRP is restarting after some time.
-------------------*******helppp******************************
Hi,
I have the same problem, few post below.
During my searching I found this post, but I get error during
fastboot erase spare
It hard to say what wrong is with this partition.
Maybe you will be have more luck
Elokwentnyemu said:
Hi,
I have the same problem, few post below.
During my searching I found this post, but I get error during
fastboot erase spare
It hard to say what wrong is with this partition.
Maybe you will be have more luck
Click to expand...
Click to collapse
In my case, the phone is not listed under fastboot devices But it's connected to computer in fastboot mode and we can see the device is listed when command lsusb is executed.
antoponline said:
In my case, the phone is not listed under fastboot devices But it's connected to computer in fastboot mode and we can see the device is listed when command lsusb is executed.
Click to expand...
Click to collapse
I checked on Manjaro and my phone is present under fastboot. Try reinstall drivers or use other PC to connect by fastboot.
so sad for both of you guys i've already encountered this before try this any of these.
- use adb sideload via TWRP using stock firmware UL-ASUS_T00F-WW-2.22.40.54-user.zip
- if you have a back up restore it, then boot to fastboot and flash the fastboot, boot and recovery of this firmware UL-ASUS_T00F-WW-2.22.40.54-user.zip then boot to recovery and side again using this firmware.
- try this link if it's work http://forum.xda-developers.com/android/development/hard-bricked-zenfone-unbrick-method-to-t3131911
sorry guys i forgot how i managed to solve this i will update this thread. just always remember use always this firmware UL-ASUS_T00F-WW-2.22.40.54-user.zip and back your current rom even if it's stock or custom this is most important. if you can access bootloader just do the flashing fastboot, boot and recovery this would be easy if you can access bootloader.
DWYOR
After a long time of googling I got a solution for yu5510a full access.
You need
Adb + fastboot
Twrp 2.8.7.0 tomato
SuperSU.zip
Coolpad drivers
Cyanogen ROM V1 from firmwarefile.com
Any Custom Rom, I am using aosp extended.
Gapps
Memory card
Install all drivers , adb & fastboot.
First flash Cyanogen ROM using YGDP tool
Use version 3.98 in other versions I got problems.
After ROM installation enable developer option.
Enable android debugging, fast reboot and check update cyanogen recovery
Now connect phone with PC
Goto adb folder
Copy twrp.img in adb folder
Shift + Right click select open command window here
Type adb devices
Device should be shown if not showing try to install adb drivers
Now after that
Type Command adb reboot-bootloader
Device will be rebooted in bootloader
Type command fastboot -i 0x1ebf oem device-info to verify device in fastboot mode and your bootloader is unlocked or not.
If bootloader showing unlocked then follow next process if not then unlock it
Type command fastboot -i 0x1ebf oem unlock
Boot loader unlocked now.
Remove data cable and remove battery from phone for 30 secs and reinsert again.
Press volume + key and hold
Attach phone with PC ( it shows fastboot mode)
After that type command
fastboot -i 0x1ebf flash recovery twrp.img
When done remove data cable & battery
After 30 secs reinsert battery
Press Volume + , Volume - & Power key
When yu logo appears release power key and keep pressing both volume keys
You will be goto twrp
Now wipe everything also format data/don't delete mmc
Restart twrp to recovery
Your internal and external storage are mounted.
Install any custom ROM for yureka/yureka plus
Flash gapps ( not required in miui & quarkos)
Flash SuperSU.zip
Reboot
It takes 10-15 minutes for first boot .
Done
Flash Latest NON-HLOS.bin before flashing any volte ROM.
Flash through fastboot
File link
https://drive.google.com/file/d/0B8Vodzmhc0GlXzdtOUFjb29EOFU/view
Extract .zip
Copy NON-HLOS.bin in adb folder
Open command prompt here
Connect phone into fastboot mode
Type command
fastboot -i 0x1ebf flash modem NON-HLOS.bin
Wait till process done.
Disconnect phone
Remove battery and insert again
Goto twrp recovery.
Install any volte enabled ROM.
Enjoy.:good:
OEM unlock command not found
hi,
I am trying to root my yu yureka plus( YU5510A white color) running android 5.1.1 , build number is 5.1.111.P0.160314.YU5510A , i am able to connect the phone to my PC running adb,
"adb devices" lists the phone , "adb reboot bootloader" puts the phone in fastboot ( screeen doesnt show fastboot instead it shows do not disconnect usb cable and non secure phone). When i run the command fastboot -i 0x1ebf oem unlock , im getting the error as command not found. same error im getting when i run the command fastboot -i 0x1ebf oem device-info
what could be the reason.
Any help in this regard is appreciated.
nischait said:
DWYOR
After a long time of googling I got a solution for yu5510a full access.
You need
Adb + fastboot
Twrp 2.8.7.0 tomato
SuperSU.zip
Coolpad drivers
Cyanogen ROM V1 from firmwarefile.com
Any Custom Rom, I am using aosp extended.
Gapps
Memory card
Install all drivers , adb & fastboot.
First flash Cyanogen ROM using YGDP tool
Use version 3.98 in other versions I got problems.
After ROM installation enable developer option.
Enable android debugging, fast reboot and check update cyanogen recovery
Now connect phone with PC
Goto adb folder
Copy twrp.img in adb folder
Shift + Right click select open command window here
Type adb devices
Device should be shown if not showing try to install adb drivers
Now after that
Type Command adb reboot-bootloader
Device will be rebooted in bootloader
Type command fastboot -i 0x1ebf oem device-info to verify device in fastboot mode and your bootloader is unlocked or not.
If bootloader showing unlocked then follow next process if not then unlock it
Type command fastboot -i 0x1ebf oem unlock
Boot loader unlocked now.
Remove data cable and remove battery from phone for 30 secs and reinsert again.
Press volume + key and hold
Attach phone with PC ( it shows fastboot mode)
After that type command
fastboot -i 0x1ebf flash recovery twrp.img
When done remove data cable & battery
After 30 secs reinsert battery
Press Volume + , Volume - & Power key
When yu logo appears release power key and keep pressing both volume keys
You will be goto twrp
Now wipe everything also format data/don't delete mmc
Restart twrp to recovery
Your internal and external storage are mounted.
Install any custom ROM for yureka/yureka plus
Flash gapps ( not required in miui & quarkos)
Flash SuperSU.zip
Reboot
It takes 10-15 minutes for first boot .
Done
Click to expand...
Click to collapse
nithin1664 said:
hi,
I am trying to root my yu yureka plus( YU5510A white color) running android 5.1.1 , build number is 5.1.111.P0.160314.YU5510A , i am able to connect the phone to my PC running adb,
"adb devices" lists the phone , "adb reboot bootloader" puts the phone in fastboot ( screeen doesnt show fastboot instead it shows do not disconnect usb cable and non secure phone). When i run the command fastboot -i 0x1ebf oem unlock , im getting the error as command not found. same error im getting when i run the command fastboot -i 0x1ebf oem device-info
what could be the reason.
Any help in this regard is appreciated.
Click to expand...
Click to collapse
Try without using 0x1ebf and report.
nischait said:
Try without using 0x1ebf and report.
Click to expand...
Click to collapse
I tried without -i 0x1ebf also but it does not show in fastboot. With -i 0x1ebf it shows "xyznumbers fastboot" . The problem now is , I flashed through YGDP tool and now it shows aboot failed image, and does not boot at all.
Why doe my phone show non secure phone ?
Please help.
Yogesh1969 said:
I tried without -i 0x1ebf also but it does not show in fastboot. With -i 0x1ebf it shows "xyznumbers fastboot" . The problem now is , I flashed through YGDP tool and now it shows aboot failed image, and does not boot at all.
Why doe my phone show non secure phone ?
Please help.
Click to expand...
Click to collapse
Download cyanogen ROM and flash it with ygdp
1st ever rom uploaded in AFH.
Your device should be boot up.
Then try with command prompt.
May be new device having different device ID.
nischait said:
Try without using 0x1ebf and report.
Click to expand...
Click to collapse
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
nischait said:
Download cyanogen ROM and flash it with ygdp
1st ever rom uploaded in AFH.
Your device should be boot up.
Then try with command prompt.
May be new device having different device ID.
Click to expand...
Click to collapse
I couldnt find the ygdp version of Cynogen, any way I found a way from youtube which solved my problems.
Link : https://www.youtube.com/watch?v=2Gpz65r2pNM
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
vijaykumarbabu079 said:
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
Click to expand...
Click to collapse
For drivers problem install pdanet. And you can refer to the youtube video link (above post) if you want for all needs.
vijaykumarbabu079 said:
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
Click to expand...
Click to collapse
Getting your device connected is a very important stage, whether it is system,recovery or fastboot. From what I read , you can connsct through fasatboot, since you flashed cyanogen. Just flash TWRP 3.2.1 or so which is the latest, through fastboot:
fastboot flash recovery twrp.3.2.1 .img ( Remember the spaces, the name twrp.xxx.img should be same as you downloaded. If flash is successful, you can see twrp when you boot to recovery. Then flash supersu file and/or whichever rom you want.
Sorry for late answers.
I was lil busy and sorry for wrong address also.
You could get it from firmwarefile.com
I can't post link here but select yu yureka plus variant and download oldest CBP
Hello!
I have a very big problem. My LG Leon H340N is "bricked" totally, there is only fastboot mode in phone, nothing else.
The problem is that fastboot is not working, when i try to execute some commands it all the time gives me answer: FAILED(Unknow Command) and i don't know how to fix this, i don't have access to download mode, i don't have access to hard reset menu, i don't have access to recovery mode, only fastboot
Could somebody help me ?
How did you get into fastboot mode?
I connect device and laptop via USB and device is starting into fastboot mode automatically.
When device is connected i open cmd (run as administrator) and C:\ cd adb = C:\adb> fastboot devices - and it shows me my device connected as fastboot device then I try to execute some commands but it always gives FAILED(UnknowCommand). The fastboot drivers are installed - original google drivers from android sdk. I'm using Windows 7 Home Premium, i try execute some commands on other laptop with windows 7 starter but the same thing - FAILED(Unknow Command).
Thank you for reply, Regards
Flash the version MS34510d_00
I don't have MetroPCS version it's h340n. And i can't flash anything, because fastboot is not working
Install android 5
Dude, i know, i want to install android 5 but you don't see that fastboot in my phone IS NOT WORKING ? every time, when i try to exec some commands it gives me: FAILED(UnknowCommand)
for mode download
Hi!
I bricked my axon7 g.. I had a running CM15.1 and wanted to restore a CM14.1 backup. First of all i downloaded and flashed the modem and bootloader for cm14.1. after that i wiped system and data and rebootet into recovery. Here I noticed a bug wich i already had when I updated to CM15.1: the data and system partition are unable to mount. So i download and installed a other recovery (nfound) and rebooted. And here is the Problem: I'm unable to go into the recovery.
After some hours of trying different methods I need your help. This is what I found out:
1) I can boot into FFBM and fastboot
2) when I boot into fastboot the windows device manager shwos me Android ADB Device
3) when i try to use the adb tool i says:
Search >>> interface found >>> Android ADB Interface
Checking ADB Interface:
Command execution adb devices >>> !!! Error !!! no answer from phone
This is becuase usb debugging was not enabled.
4) When i use the dfu tool and wnat to confirgure the ports it only says: this device has no usb ports or (when i turn of virus scanner and reboot..) "the tool is running"
Is there any way to flash a recovery?
Thank you!
I solved it via fastboot and adb
I wanted to install a custom rom for my moto g4 and I just have problems with installing twrp. I downloaded twrp img and adb tools, then connected my phone to the pc in debug mode. In the adb console, the phone is displayed, but when I put the phone in the fastboot mode, it is not recognized.
that's cos there's separate program (e.g. fastboot) for interfacing with bootloader (c.f. Android Debug Bridge for interacting with recovery or Android).