Hi ,
The phone does not react at all after installing recovery .img 3.1
The phone is starting to shut down
not work fastboot mode
not work normal open
not work recovery mode.
sorry bad english
Try booting into FTM mode (Volume Down and Power) and do an "adb reboot edl" to get into EDL mode. Once there you can flash a stock ROM via MiFlash.
1
mwarner said:
Try booting into FTM mode (Volume Down and Power) and do an "adb reboot edl" to get into EDL mode. Once there you can flash a stock ROM via MiFlash.
Click to expand...
Click to collapse
thanks
miflash b10 full edl flash worked phone
Related
i flash my device 2.1 + fastboot. but i cant enter fastboot mode with these combination camera + power. i know that my phone has a fastboot mode. because there is a weird thing happen, it enter fastboot mode even i did'nt hold the camera and power button, i just plug my phone into my computer, and now i cant enter fastboot anymore. any ideas?
flash it again, try another ROM
Hy,
i,m on 2017G B03
Just tried to install the original twrp version. Now my phone doesnt boot into recovery but still boots rom. I´m also not able to boot into edl.
Any ideas?
Yours
Scholli
If your phone is rooted, you can use flashify to install the newest TWRP.
Otherwise booting into edl by either "adb reboot edl" or pressing (volume up + volume down + power) should work otherwise your phone is broken.
Last Option would be to boot into fastboot ("adb reboot fastboot") and flash via "fastboot flash recovery twrp.img" (please note that your bootloader needs to be unlocked for this operation)
Flahify worked!
Thank you
What happens when you boot your device, enable usb debugging, connect it to your pc, open up a command window in the folder where you downloaded adb and enter the command "adb reboot edl"? What does it say?
Try restarting your adb server with "adb kill-server" followed by "adb start-server" and then retry the "adb reboot edl" command.
Also try to kill the "adb.exe" process in task manager before trying again.
Alternatively, you can try powering the phone off, and then holding both volume buttons while connecting it via USB. Some users manage to get to EDL this way, but personally I get DFU mode.
If you manage to get the phone in EDL mode, try restoring the stock recovery backup you made with the axon7tool and then reflashing TWRP. One user reported this fixed his similar issue.
EDIT: Too late Wonderful to see everyone helping each other so quickly.
I am facing a problem in charging the only way I can charge my phone is to reboot my phone after only that it starts charging any solution?
mayank.. said:
I am facing a problem in charging the only way I can charge my phone is to reboot my phone after only that it starts charging any solution?
Click to expand...
Click to collapse
do a clean flash in edl mode
Jure_aleksic said:
do a clean flash in edl mode
Click to expand...
Click to collapse
How to flash using edl mode?
mayank.. said:
How to flash using edl mode?
Click to expand...
Click to collapse
Firstly download the fastboot romhttp://update.miui.com/updates/v1/fullromdownload.php?d=land_global&b=F&r=global&n=
Then download MiFlash tool, u can find it on en.miui.com website.
Extract the fastboot rom package(u might need 7-zip)
Reboot your device to EDL mode, either by adb command "adb reboot edl" without quotes or powering off your device and then pressing and holding vol + and vol - and plugging in the usb cable
U need qualcomm's drivers which are included in mi flash tool
After you've setup everything, open mi flash, choose which command to use and flash
Backup everything before flashing
Jure_aleksic said:
Firstly download the fastboot romhttp://update.miui.com/updates/v1/fullromdownload.php?d=land_global&b=F&r=global&n=
Then download MiFlash tool, u can find it on en.miui.com website.
Extract the fastboot rom package(u might need 7-zip)
Reboot your device to EDL mode, either by adb command "adb reboot edl" without quotes or powering off your device and then pressing and holding vol + and vol - and plugging in the usb cable
U need qualcomm's drivers which are included in mi flash tool
After you've setup everything, open mi flash, choose which command to use and flash
Backup everything before flashing
Click to expand...
Click to collapse
Thank you
Jure_aleksic said:
Firstly download the fastboot romhttp://update.miui.com/updates/v1/fullromdownload.php?d=land_global&b=F&r=global&n=
Then download MiFlash tool, u can find it on en.miui.com website.
Extract the fastboot rom package(u might need 7-zip)
Reboot your device to EDL mode, either by adb command "adb reboot edl" without quotes or powering off your device and then pressing and holding vol + and vol - and plugging in the usb cable
U need qualcomm's drivers which are included in mi flash tool
After you've setup everything, open mi flash, choose which command to use and flash
Backup everything before flashing
Click to expand...
Click to collapse
I fastboot my phone still same charging issue coming up
Hello,
Can anyone assist me in fixing my issue? My phone couldn't boot to recovery mode, i see the TWRP bluescreen and it immediately enters the boot loop. I can boot to fastboot&rescue mode but adb is not detecting my devices. I tried reinstalling the driver and also restart the adb server, but no luck. Tried different USB ports \cable\laptop, but no luck.
Need some assistance or direction to address this issue.
Regards
sri1225 said:
Hello,
Can anyone assist me in fixing my issue? My phone couldn't boot to recovery mode, i see the TWRP bluescreen and it immediately enters the boot loop. I can boot to fastboot&rescue mode but adb is not detecting my devices. I tried reinstalling the driver and also restart the adb server, but no luck. Tried different USB ports \cable\laptop, but no luck.
Need some assistance or direction to address this issue.
Regards
Click to expand...
Click to collapse
adb does not work in the bootloader (Fastboot mode)
in bootloader use
fastboot boot twrp.img
just be sure twrp has the correct name and is in the same folder as adb / fastboot
@sri1225,
Adding to clsA post:
If the phone is in fastboot mode, "fastboot devices" should work to confirm PC connection is good and produces a similar response as "adb devices" does when in adb mode.
What led up to the phone getting broken? You said it's bricked - so it won't boot up to normal operating mode?
clsA said:
adb does not work in the bootloader (Fastboot mode)
in bootloader use
fastboot boot twrp.img
just be sure twrp has the correct name and is in the same folder as adb / fastboot
Click to expand...
Click to collapse
divineBliss said:
@sri1225,
Adding to clsA post:
If the phone is in fastboot mode, "fastboot devices" should work to confirm PC connection is good and produces a similar response as "adb devices" does when in adb mode.
What led up to the phone getting broken? You said it's bricked - so it won't boot up to normal operating mode?
Click to expand...
Click to collapse
I tried to flash with the B180+Stock+Rom, after that I cannot go back to TWRP or in recovery mode.
When I do the "fastboot boot twrp.img", in the fastboot&rescue mode, the phone reboots to twrp screen and goes back to the boot loop again. I have tried both the twrp images available in the forum for this device.
Regards
sri1225 said:
I tried to flash with the B180+Stock+Rom, after that I cannot go back to TWRP or in recovery mode.
When I do the "fastboot boot twrp.img", in the fastboot&rescue mode, the phone reboots to twrp screen and goes back to the boot loop again. I have tried both the twrp images available in the forum for this device.
Regards
Click to expand...
Click to collapse
The B180 stock rom replaces TWRP with stock recovery
If you want TWRP again flash it from the bootloader
fastboot flash recovery twrp.img
when you enter TWRP
goto Wipe/Format Data/ and type yes
now you can root the phone or leave it as is
Fwiw, the 'boot' command only boots twrp, it doesn't flash it. Thats useful for testing that twrp works. The proper command to flash is immediately above this post. Take it from me - always test first. If it boots, it works.
clsA said:
The B180 stock rom replaces TWRP with stock recovery
If you want TWRP again flash it from the bootloader
fastboot flash recovery twrp.img
when you enter TWRP
goto Wipe/Format Data/ and type yes
now you can root the phone or leave it as is
Click to expand...
Click to collapse
Tried flashing TWRP but didn't work. Couldn't get to TWRP screen at all.
sri1225 said:
Tried flashing TWRP but didn't work. Couldn't get to TWRP screen at all.
Click to expand...
Click to collapse
Try the command 'fastboot devices', what does it output..? Are you sure you are in fastboot mode, with the screen and the Android with its chest popped open..?
Hi
How to boot to edl mode via fastboot mode ?
No issue if using "adb reboot edl"
But I need it via fastboot mode (vol down + power)
EDL mode is where computer will detect 9008 in device mgr
Realme 2 Pro 8/128 version
aariss said:
Hi
How to boot to edl mode via fastboot mode ?
No issue if using "adb reboot edl"
But I need it via fastboot mode (vol down + power)
EDL mode is where computer will detect 9008 in device mgr
Realme 2 Pro 8/128 version
Click to expand...
Click to collapse
try below tool
https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
I am using Realme 3 pro but this is not working for me. As soon as I try to enter fastboot mode, error message shows that the image is corrupted. Any other way pls.
Never tried on realme as there is no need for edl as there is no tool provided by realme to flash its devices. But u can boot via adb reboot edl (doesn't work on xiaomi) fastboot reboot edl or fastboot oem edl . Or u can use twrp recovery if possible .
I was able to enter EDL mode through Orangefox recovery in Realme XT, but there's no option as it is in the fastboot mode. If i could enter EDL only through recovery, then its kinda useless since I won't even need EDL if my recovery is working.