Related
I had installed lineage os the latest build using twrp but the auto rotate function is not working and the fingerprint option is not shown in the settings
jay9167 said:
I had installed lineage os the latest build using twrp but the auto rotate function is not working and the fingerprint option is not shown in the settings
Click to expand...
Click to collapse
Did you installed a cm13 based rom before installing LineageOS 14.1 or did you installed it directly coming from cos 12.1? Please give some more details about your device, the rom versions and detailed steps of installation, maybe with links.
It sounds like the missing of drivers which is known if you don't follow install instructions.
strongst said:
Did you installed a cm13 based rom before installing LineageOS 14.1 or did you installed it directly coming from cos 12.1? Please give some more details about your device, the rom versions and detailed steps of installation, maybe with links.
It sounds like the missing of drivers which is known if you don't follow install instructions.
Click to expand...
Click to collapse
I directly installed from 12.1
jay9167 said:
I directly installed from 12.1
Click to expand...
Click to collapse
You need to install a cm13 based rom first before LineageOS 14.1. Nuclearom or similar.
strongst said:
You need to install a cm13 based rom first before LineageOS 14.1. Nuclearom or similar.
Click to expand...
Click to collapse
Hey, I am here for almost the same thing, went from cos to nuclear before lineage and booted in between but I still don't have a fingerprint scanner.
Gvina said:
Hey, I am here for almost the same thing, went from cos to nuclear before lineage and booted in between but I still don't have a fingerprint scanner.
Click to expand...
Click to collapse
Then you know what to do now :good: the other method if it did not help is to flash zui 2.5 first
strongst said:
Then you know what to do now :good: the other method if it did not help is to flash zui 2.5 first
Click to expand...
Click to collapse
I might check that late but it's not that important for me, will do it before moving to LOS15 probably.
To original poster of thread, I do have auto rotate but no fingerprint.
strongst said:
You need to install a cm13 based rom first before LineageOS 14.1. Nuclearom or similar.
Click to expand...
Click to collapse
Can u give me the link to download the cm 13
I am unable to find it , I had tried a lot plz help
jay9167 said:
Can u give me the link to download the cm 13
I am unable to find it , I had tried a lot plz help
Click to expand...
Click to collapse
And do I have to clear the system(cm13) and then install lineage or directly install lineage os
jay9167 said:
Can u give me the link to download the cm 13
I am unable to find it , I had tried a lot plz help
Click to expand...
Click to collapse
I have one on my Google drive for emergency Szenarios :good:
https://drive.google.com/file/d/0B4Zy8uoEfFKLaEJ2NTZpc1Z5U3M/view?usp=drivesdk
jay9167 said:
And do I have to clear the system(cm13) and then install lineage or directly install lineage os
Click to expand...
Click to collapse
You need to wipe system and date, then clean install lineageos 14.1
strongst said:
I have one on my Google drive for emergency Szenarios :good:
https://drive.google.com/file/d/0B4Zy8uoEfFKLaEJ2NTZpc1Z5U3M/view?usp=drivesdk
You need to wipe system and date, then clean install lineageos 14.1
Click to expand...
Click to collapse
I had done but in cm 13 there was no option for finger print and auto rotate was also not working but then I installed the lineage os 14.1 and in that also the same happend now what shoupd I do???
jay9167 said:
I had done but in cm 13 there was no option for finger print and auto rotate was also not working but then I installed the lineage os 14.1 and in that also the same happend now what shoupd I do???
Click to expand...
Click to collapse
As I already wrote: https://forum.xda-developers.com/zuk-z1/help/lineage-os-t3677622/post73902680
That's the other method.
Which rom is the best for pubg gaming and good battery backup for this device
Here is an AOSPA port thanks to team Superluminal. They make solid roms which I used on my Mi4C
This is Team Superluminal AOSPA 7 (android 7 nougat) port for your Xiaomi Mi6
Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Based on nougat-mr2 branch.
Proprietary blobs are from miui dev 7.11.6 version.
Click to expand...
Click to collapse
AOSPA ROM Highlights
Passes safetynet check
Overall smooth and “snappy” (and pretty stable too)
No manufacturer pre-installed crappy software, you choose what to install!
Subtratum Support (OMS rom, no need to root for Substratum)
Good battery life
Easy to root (SuperSU included in TS extra, optional)
AOSPA features
Immersive mode
PA browser
Pocket Lock
Accidental Touch
Improvements to Color Engine
Pie Control (with immersive mode)
Swiping Screenshot
Paranoid Shuttle+ music player
Click to expand...
Click to collapse
Known issues/bugs:
NA
Special thanks to:
AOSPA team & everyone who’s been working on AOSPA
thune-xiaobai (device base)
Website: http://www.teamsuperluminal.org/aospa-7-mi6/
Rom: http://www.teamsuperluminal.org:8000/pa_sagit-7.3.1-EOL-20171119.zip I recommend registering on their website for future downloads
Finally new cusrom, gonna test it later
@ekkilm has write a thread about it
https://forum.xda-developers.com/mi-6/how-to/aospa-7-sagit-t3695136
Just flashed... Looks like a beast of a rom!
All the latest comits and touch drivers too. Smooth AF and not overheating the processor
Might just have to donate ?
This rom is just next level polish! Everything just works and the kernel is a beast.. When you type you will feel the difference. Lag free.
adey64 said:
This rom is just next level polish! Everything just works and the kernel is a beast.. When you type you will feel the difference. Lag free.
Click to expand...
Click to collapse
Agree, need more costumization
i hope AOSPA will more add customizion
Hey, i always get twrp openscriptrecevory bootloop with customs roms.. exept xiaomi.eu
Any tips ?? (twrp3.1.1-1)
Pierroxx said:
Hey, i always get twrp openscriptrecevory bootloop with customs roms.. exept xiaomi.eu
Any tips ?? (twrp3.1.1-1)
Click to expand...
Click to collapse
Follow theses steps to install cleanly
1. Enter twrp
2. Wipe data (normal wipe)
3. Install all zips and Roms
4. Don't restart yet
5. Go back to wipe and click format data
6. Reboot.. Enjoy!
?????
adey64 said:
Follow theses steps to install cleanly
1. Enter twrp
2. Wipe data (normal wipe)
3. Install all zips and Roms
4. Don't restart yet
5. Go back to wipe and click format data
6. Reboot.. Enjoy!
Click to expand...
Click to collapse
It doesnt works (
Pierroxx said:
It doesnt works (
Click to expand...
Click to collapse
Did you install firmware 7.11.6 then rom?
Did you format data (not wipe) after install all the zips?
adey64 said:
Did you install firmware 7.11.6 then rom?
Did you format data (not wipe) after install all the zips?
Click to expand...
Click to collapse
So, i did factory reset, flash firmware, then Rom and wipe data then reboot. I don't flash anything else, is that a problem ?
EDIT : I previously was on xiaomi.eu 7.11.16 with magisk enabled
Pierroxx said:
It doesnt works (
Click to expand...
Click to collapse
Then make clean fastboot flash then install TWRP and go by the book
I don't believe it wouldn't work
wojtoo said:
Then make clean fastboot flash then install TWRP and go by the book
I don't believe it wouldn't work
Click to expand...
Click to collapse
hey, by xlean fastboot you mean "fastboot erase cache" and then reflash twrp ?
thanks ,some quetions
1.OTA support?
2.will update to Oreo?
3.It's official?
thanks!
Pierroxx said:
So, i did factory reset, flash firmware, then Rom and wipe data then reboot. I don't flash anything else, is that a problem ?
EDIT : I previously was on xiaomi.eu 7.11.16 with magisk enabled
Click to expand...
Click to collapse
Did you press the format data button and then type yes?
YEAH i did a mistake, i'm sorry guys, i was juste ticking the data option and then wipe it, by only press the data button it worked ! By the way somehting i noticed, TWRP always roll back to 3.1.1-0 when i flash 3.1.1-1 !
How did you install twrp?
yme1997611 said:
1.OTA support?
2.will update to Oreo?
3.It's official?
thanks!
Click to expand...
Click to collapse
1. No.
2. Yes, when the time is right
3.No. And it will not be
This rom sot Vs lineageos? Which one is better? Thanks
Are there any AOSP ROMS for Mate 10 lite/Nova 2i? Please tell me if there's a rom thanks
There are many, using gsi treble rom..
You can search on google how to flash..
travarilo said:
There are many, using gsi treble rom..
You can search on google how to flash..
Click to expand...
Click to collapse
Where did you install this rom, give me the link is not, tks
travarilo said:
There are many, using gsi treble rom..
You can search on google how to flash..
Click to expand...
Click to collapse
Any issue sir on your RROS ?
SubIMEI said:
Where did you install this rom, give me the link is not, tks
Click to expand...
Click to collapse
Allan C. E said:
Any issue sir on your RROS ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
It's still using stock aosp camera, can't flash huawei camera, so camera is featureless but works..
Broken voice on earphone when playing spotify sometimes..
I used it for a day and back to stock rom because of camera so I didn't test more..
travarilo said:
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
It's still using stock aosp camera, can't flash huawei camera, so camera is featureless but works..
Broken voice on earphone when playing spotify sometimes..
I used it for a day and back to stock rom because of camera so I didn't test more..
Click to expand...
Click to collapse
flash Gapps ver ?
SubIMEI said:
flash Gapps ver ?
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=962187416754467868
I'm RNE-L22 too...I really does work?!?
travarilo said:
There are many, using gsi treble rom..
You can search on google how to flash..
Click to expand...
Click to collapse
123az said:
I'm RNE-L22 too...I really does work?!?
Click to expand...
Click to collapse
I am on RNE-L22 too
I'm so scared to try...I have done twrp flashong of custom roms..im new to this GSI img thingy
How long did the process take?
travarilo said:
I am on RNE-L22 too
Click to expand...
Click to collapse
123az said:
How long did the process take?
Click to expand...
Click to collapse
it's pretty fast, maybe 10 - 15 minutes..
boot to twrp, factory reset, reboot to recovery, install file .img as system image, reboot to recovery, install gapps & magisk, reboot system..
Team Openkirin has released GSI images but still haven't give us instructions to use them
https://www.xda-developers.com/openkirin-emui-8-huawei-honor/
---------- Post added at 08:59 AM ---------- Previous post was at 08:15 AM ----------
Which Twrp recovery are you using?
travarilo said:
it's pretty fast, maybe 10 - 15 minutes..
boot to twrp, factory reset, reboot to recovery, install file .img as system image, reboot to recovery, install gapps & magisk, reboot system..
Click to expand...
Click to collapse
123az said:
Team Openkirin has released GSI images but still haven't give us instructions to use them
https://www.xda-developers.com/openkirin-emui-8-huawei-honor/
---------- Post added at 08:59 AM ---------- Previous post was at 08:15 AM ----------
Which Twrp recovery are you using?
Click to expand...
Click to collapse
I am using this one https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
Btw, Carbon ROM from openkirin is working, there are 2 cameras, stock and huawei..
Video rec, bokeh, portrait on huawei camera don't work, pro mode works..
Stock camera is featureless but both photo and video work..
GApps has been included..
travarilo said:
I am using this one https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
Btw, Carbon ROM from openkirin is working, there are 2 cameras, stock and huawei..
Video rec, bokeh, portrait on huawei camera don't work, pro mode works..
Stock camera is featureless but both photo and video work..
GApps has been included..
Click to expand...
Click to collapse
Have you tried the RR one? I downloaded it but it has a different file extension ".xz" instead of ".img".
jonj0njon said:
Have you tried the RR one? I downloaded it but it has a different file extension ".xz" instead of ".img".
Click to expand...
Click to collapse
just extract..
RR built with no gapps, so you need to flash gapps after flashing system image..
travarilo said:
just extract..
RR built with no gapps, so you need to flash gapps after flashing system image..
Click to expand...
Click to collapse
This P10 Lite Version of TWRP works with Mate 10 Lite ? And what Magisk Version u have installed ?
My Problem is, i tested now carbon an rr. but every rom boots to erecovery and want a format data/factory reset. boot to twrp, format data, issue persist. everytime erecovery No boot to system
Copkiller2010 said:
This P10 Lite Version of TWRP works with Mate 10 Lite ? And what Magisk Version u have installed ?
My Problem is, i tested now carbon an rr. but every rom boots to erecovery and want a format data/factory reset. boot to twrp, format data, issue persist. everytime erecovery No boot to system
Click to expand...
Click to collapse
Yeah it works, I use magisk 16.4
Make sure you are in oreo stock rom, boot to twrp, factory reset, format data if you want to clean flash, flash system image, reboot to recovery, flash gapps for rr, flash magisk, reboot to system..
I did that and it was booting normally..
I am on Elemental Rom 1.1. Its emui 8 but not Boot. Do the Same you wrote. Maybe Data Format to ext4? I dont unterstand the Reason why not Boot.
Copkiller2010 said:
I am on Elemental Rom 1.1. Its emui 8 but not Boot. Do the Same you wrote. Maybe Data Format to ext4? I dont unterstand the Reason why not Boot.
Click to expand...
Click to collapse
Idk, maybe you should try to flash stock rom first to make it boot..
My data partition is f2fs, no need to format to ext4..
ROM IS NOT MINE SO NEVER ASK ME ABOUT UPDATE!!!
ME JUST INSTAL N MAKE BACKUP FOR OUR MIDO
working:
.>>>RIL PHONE
>>>WIFI
>>>INTERNET
>>>SMS
>>>VOLTE
>>>BT HEADSET
>>>CAMERA STOCK NEW DESAIN WITH POTRET MODE
>>>GCAM
>>>GOOGLE AR
>>>LED NOTFICATION
>>>LED BUTTOM
>>>BRIGNESS
>>>GPS
>>>FP PERFECT WORKING
>>>CAMCORDER
>>>VIDEO
>>AUDIO
>>>DOLBY,
>>>VIPER,
>>>SONY EQUALIZER)
>>>VIDEOCALL
>>>MI ACCOUNT
>>>MAGISK N ROOT
>>>GESTURE
>>>THEME N FONT CHANGE
>>>LONGSCREENSHOT
>>>HOTSPOT
>>>KOMPASS
>>>SOUND RECRDING
>>>POCO LAUNCHER
>>>FULLSCREEN MODE
>>>DISPLAY SIZE
>>>GOOGLE ASISTEN
>>>GOOGLE LENS
>>>COLOR CORECTIONNOW WORKING
>>>COLOR INVERTION (NOW WORKING
>>>SYNC
>>>FOR MORE SEE THE VIDEO
BUG :
>FACE UNLOCK
>READ MODE
>STOCK EQUALIZER
maybe more
INSTALATION DOWNLOAD ALL FILE FROM TUTORIAL...
1. INSTAL STOCK MIUI ROM (USE MIFLASH DO CLEAN ALL RECOMENDED}LOGIN TO YOUR ACCOUNT SYNCRONISASI MY CLOUD /FIND MY DEVICE
2. REINSTAL TWRP USE THIS TWRP ..IF YOU USE OTHER TWRP EXAMPLE FOX TRWP IF ERROR NEVER ASK ME... (REMEMBER THIS MAN.. XD XD XD)
https://drive.google.com/file/d/1vqkoYNfEFhHKd1_pqM1X01CHP0QNmEWu/view?usp=sharing
2.WIPE EVERYTHING ...(SDCARD NO!!!!
3.INSTAL AOSPETENDED 5,8 BY @ [email protected] FROM HERE AospExtended ROM V5.8 OFFICIAL
3.XTRACT FILE ROM POCO THAN RESTORE... AFTER DONE REBOOT TO RECOVERY
4.MOUNT VENDOR AND SYSTEM THAN INSTAL THIS FILE FIX BUG SOUND CAMERA ETC
5. INSTAL THIS FILE PATCH V2BYJSSPIRIT
6.REBOOT TO RECOVERY AGAIN MOUNT VENDOR DATA SYSTEM
7. INSTAL THIS FILE FBE DISABLETHAN INSTALPERMESIVERREBOOT WAIT 5-15 MENITS.. NOW POCOROM ON YOUR PHONE
DOWNLOADOCO F1
POCOROM GDRIVE
alternatif
http://www.mediafire.com/file/8pspsacm1vokptz/POCOF1REPACK_27-10-2018BYXBGBX.zip/file
for playstore problem https://forum.xda-developers.com/showpost.php?p=77987723&postcount=103
THANK TO @fxsheep FOR THE ROM
N @[email protected] FOR ROM VENDOR
ROM PREVIEW youtube video
https://youtu.be/yJe3nW-zIdw
great idea to port this rom. thank you, downloading and testing...
I wondering, why we have to flash aex 5.8 first? What about the other rom?
ali.f said:
I wondering, why we have to flash aex 5.8 first? What about the other rom?
Click to expand...
Click to collapse
Because you need to get treble support
seijuro572 said:
Because you need to get treble support
Click to expand...
Click to collapse
Theres alot of treble rom.... Los 16.1, RR, etc. How about the other treble rom?
I installed it but briked logo. Help me!. I need video how to install rom poco
ali.f said:
Theres alot of treble rom.... Los 16.1, RR, etc. How about the other treble rom?
Click to expand...
Click to collapse
Maybe because he tested it already on aex 5.8 which obviously worked since it's in the procedure and haven't tested it on other treble roms.
ali.f said:
Theres alot of treble rom.... Los 16.1, RR, etc. How about the other treble rom?
Click to expand...
Click to collapse
this rom need aosp as vendor.. try rr not booting lineage not booteng too... try use aosp booting that aospextended just recomended rom...
channguyen said:
I installed it but briked logo. Help me!. I need video how to install rom poco
Click to expand...
Click to collapse
do wipe data
İ am using this rom, flash method
All wipe
This photo aex vendor,
Thread rom all restore
Direct reboot
No problem okboot
xbgpx said:
this rom need aosp as vendor.. try rr not booting lineage not booteng too... try use aosp booting that aospextended just recomended rom...
Click to expand...
Click to collapse
No need to install any ROM... Just wipe everything and restore with TWRP
Thanks for the awesome.
How can I update the ROM? Can they port it from Redmi Note 5.
macblaze said:
No need to install any ROM... Just wipe everything and restore with TWRP
Click to expand...
Click to collapse
yes u can just restore..cos the back up contain rom aospextened... you can try with other rom as vendor but the best result on aospe xtended.. try other rom aosp fp not working...
xbgpx said:
yes u can just restore..cos the back up contain rom aospextened... you can try with other rom as vendor but the best result on aospe xtended.. try other rom aosp fp not working...
Click to expand...
Click to collapse
Thank you very much for sharing this Rom but your English is pretty whacky. Could you please fix the errors in the main post so I can understand clearly?
anyone tried copy pasting stock generic.kl of mido in this rom? maybe by doing that led buttons will work again
Sounds good..btw what about bugs?
greenys' said:
Thank you very much for sharing this Rom but your English is pretty whacky. Could you please fix the errors in the main post so I can understand clearly?
Click to expand...
Click to collapse
hahah soryy for my bad english
santanu kumbhakar said:
Sounds good..btw what about bugs?
Click to expand...
Click to collapse
for the best sound if you want use dolby u must turn of sony equaliser from sony music >setting... and if you want use sony equalizer u must turn of dolby
Somebody can help me install this port I do not understand the process very well, thanks
xbgpx said:
for the best sound if you want use dolby u must turn of sony equaliser from sony music >setting... and if you want use sony equalizer u must turn of dolby
Click to expand...
Click to collapse
You misunderstood his question.
Sounds good is an expression for seems nice, looks good etc.
He asked if there are any known bugs, problems, faults etc. with this ROM.
Official Resurrection Remix ROM by Daniel Mokarov
Rom link:
https://get.resurrectionremix.com/?dir=kuntao
Contributors:
Daniel Mokarov, mikeioannina, Astridxx
Simple guide for new comers to RR
Guide :
(As frequently we can seen users are confused which twrp to use)
1) Flash TWRP 3.2.3 (https://androidfilehost.com/?fid=1395089523397888315)
2) In recovery, Format data - yes (It will format data in ext4)
3) Reboot again to recovery and convert data to f2fs. (Yes, magisk is working without any problem)
4) Wipe system, dalvik, cache, data, internal.
5) Flash RR and Gapps (open-gapps nano is recommended)
6) Reboot (While rebooting the phone will get encrypted on its own)
7) Reboot again to recovery and flash magisk (optional)
Those with the fastboot problemcan try this:
1. Flash Rom
2. Flash Gapps
3. Flash Magisk Root (MOST IMPORTANT)
4. Power on the phone.
Note :
* For FP gestures to work, Enable its option, which is moved to resurrection tools - Buttons - additional buttons - fingerprint gesture. ( no need to flash zip ) for RR.
Click to expand...
Click to collapse
Changelog:
Refer to text file associated with rom file in the rom directory for detailed changelog.
Click to expand...
Click to collapse
Yeah I also found it listed in official website of Resurrection Remix OS
tanzeel.ahmed1306 said:
Yeah I also found it listed in official website of Resurrection Remix OS
Click to expand...
Click to collapse
Do that version also have advanced settings n all.
Abhi8232 said:
Do that version also have advanced settings n all.
Click to expand...
Click to collapse
I didn't flash it yet. I will let you know what's working n all
Flashed the ROM a while back
Here are the first impressions:
It's smooth . Boot time is quick
What works :
WiFi, Bluetooth,NFC,cast,smart pixels,fast charging
The sound output from the speaker is fine
One thing I noticed is when you check changelog in settings nothing appears .
This isn't a major issue.
Lock screen media art is missing . It doesn't work even if it's enabled .
Gcam is working fine . I don't know about the video recording bug because I flashed the pie video fix in recovery .
Need to test the battery life but it looks promising
Thanks for your info, SELinux status?
tanzeel.ahmed1306 said:
Flashed the ROM a while back
Here are the first impressions:
It's smooth . Boot time is quick
What works :
WiFi, Bluetooth,NFC,cast,smart pixels,fast charging
The sound output from the speaker is fine
One thing I noticed is when you check changelog in settings nothing appears .
This isn't a major issue.
Lock screen media art is missing . It doesn't work even if it's enabled .
Gcam is working fine . I don't know about the video
recording bug because I flashed the pie video fix in recovery .
Need to test the battery life but it looks promising
Click to expand...
Click to collapse
Media art is showing on lockscreen.
Video recording also working without any fix.
eugineprakash said:
Thanks for your info, SELinux status?
Click to expand...
Click to collapse
Selinux is enforcing
P2 is having its golden days!
Is there disable fullscreen keyboard option in RR settings?
I have found this weird bug
Battery percentage isn't changing
I charged till 70%
And it's been on the same percentage for about 1/2 hr and I was using the phone all the time .
When I click on battery usage it shows not available .
I tried using apps like accubattery to determine drop on percentage but even that was not able to determine
tanzeel.ahmed1306 said:
I have found this weird bug
Battery percentage isn't changing
I charged till 70%
And it's been on the same percentage for about 1/2 hr and I was using the phone all the time .
When I click on battery usage it shows not available .
I tried using apps like accubattery to determine drop on percentage but even that was not able to determine
Click to expand...
Click to collapse
You are using the one provided on rr website right! Because no such issue on the build i gave link for.
Both are same official build on rr website and googledrive rom
Can u test cast screen ??
Abhi8232 said:
You are using the one provided on rr website right! Because no such issue on the build i gave link for.
Click to expand...
Click to collapse
Few questions :-
F2fs data partition.
Banking apps when no magisk installed.
shailuk301 said:
Few questions :-
F2fs data partition.
Banking apps when no magisk installed.
Click to expand...
Click to collapse
banking apps are working good without root.
Which build ???
eugineprakash said:
banking apps are working good without root.
Click to expand...
Click to collapse
Drive one or from rr website.
About f2fs, any idea.
shailuk301 said:
Drive one or from rr website.
About f2fs, any idea.
Click to expand...
Click to collapse
f2fs works good
all test done
F2FS ok
CAST (wfd) ok
VILTE ok
VoLTE ok
custom kernel (kcal and the other stuff) ok
No BUGS at alll
it is the only complete rom in p2 development section
nice info, the build shared here says RR-P-v7.0.0-20190226 and the one at RR official website says RR-P-v7.0.0-20190227-kuntao.
just wondering if any difference like old and new.
what custom kernel is recommended because i use kcal all the time to tweak the display color to my taste.
shailuk301 said:
Drive one or from rr website.
About f2fs, any idea.
Click to expand...
Click to collapse
RR website
degrus said:
all test done
F2FS ok
CAST (wfd) ok
VILTE ok
VoLTE ok
custom kernel (kcal and the other stuff) ok
No BUGS at alll
it is the only complete rom in p2 development section
Click to expand...
Click to collapse
Okay kanger dani
and you didn't do anything to complete them.