(HELP) I soft/hard bricked my Axon 7 (A2017G), need help! - ZTE Axon 7 Questions & Answers

I was running android 7.0 on the A2017G version and was able to install and open TWRP, but I cannot boot and im stuck at the ZTE screen.
I am only able to boot into TWRP again and my bootloader is still locked since I dont know how to do it and I just want my phone working again, can somebody help me please??
I did this with this tutorial : http://www.droidphoria.com/2017/03/ZTE-Axon-7-Unlock-Bootloader-TWRP-Root.html
and this one : https://forum.xda-developers.com/ax...-unlock-bl-flash-t3517379/page42#post71883402

It's not a hardbrick, don't worry. The second tutorial is the best. Just follow it again (only the part of unlocking your bootloader of course because you already have recovery), and quote me when you have a problem

Related

Lenovo Tablet 2 1050L boot failure after attempted root

hi - I hope someone can help me. I have a LTE enabled Lenovo Tablet 2 1050L which I attempted to root using the instructions given here ... https://forum.xda-developers.com/thinkpad-tablet/general/how-to-root-yoga-tablet-2-t3251571 ... but I have managed to brick my device. I successfully installed SuperSU but then read that Magisk was better and tried the same procedure with that but it didn't work. Now when the tablet starts up, I get a message which says ... "EFILINUX ERROR [android_image_start_buffer:737] boot image digital signature verification failed : 0000001A" which appears over the initial Lenovo splash screen. I then get to the Android system recovery menu but I can't get the table any further than this. I have tried wiping data / factory resetting but this does not work.
I can boot the tablet into recovery mode using CWM or TWRP but I have no idea what to do now. I guess I shouldn't have messed. I hope someone can help - I've tried the official Lenovo forums but no one has answered in a week.
Kind regards
I've downloaded this ROM ... lenovo-forums.ru/files/file/1074-yoga-tablet-2-10-yt2-1050l_s100192_151119_row_los-50 ... and flashed this onto my tablet using the Intel flash tool and everything seems to be back up and running.
Can someone confirm that this is safe to do? Can I trust this ROM as it's not from an official source?
Thanks

Help Required. Bricked my phone while trying to return back to stock

Hi, Please help me to get my Axon 7 in a working state. I was using Xenon HD Rom for A2017g Oreo. With twrp version as suggested in the guide.
I followed the procedure, installed the bootstack and then stock system B09
But when I tried to reboot, it said no OS Installed. Then I rebooted, and it was stuck at bootloader with no twrp and just the message as follows :
Android Recovery : ZTE/P996A04_N/ailsa_ii
7.1.1/NMF26V/20171120.101942
user/release-keys
Use volume up/down and power
and then certain other options in blue
I used this guide : https://forum.xda-developers.com/ax...custom-rom-t3634369/post72969236#post72969236
Please help !

Possibly Dead Device? [P8/P9 Lite (2017)][PRA-LX1]

Urgent help needed as I'm leaving the country at the end of the week o any help is appreciated!
Just successfully rooted my device:
Black, Unlocked, PRA-LX1, UK, Dual SIM
After doing so successfully, I attempted to flash LineageOS from the following link:
https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-lineageos-15-1-hi6250-devices-t3811583
Although when I completed Step 6 on the Installation guide and rebooted the phone, I started seeing the message:
------------------
ERROR MODE
Attention!
Please update system again
(Green Android picture)
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
------------------
Despite this, I didn't receive a box with my phone due to being second hand, and I didn't see the model number on the receipt as it was from a reselling store. I didn't remember to note down the specific model number
It'd be extremely helpful if someone could possibly help just from the device description above as I'm not sure if it's safe for me to just attempt to flash every stock rom for every other LX1 device out there.
---------------------------------------------------------------
Update:
To restore this, I connected via fastboot with a working USB & flashed an original stock recovery in the video found here
(Just in case their download link ever goes down, I have uploaded the same copy to my MEGA, found here)
The recovery installed fine when using the command
fastboot flash recovery oeminfo.img
Click to expand...
Click to collapse
Whenever trying to flash any other recovery such as twrp before this fastboot stuck on a loading icon.
The stock recovery seems to be downloading the original firmware, too.
PRA-LX1C432B202 is presumably the model.
Both the bootloader and FRA were unlocked when everything else was inaccessible.
Looks like the custom ROM's recovery that you've flashed is not compatible with PRA-LX1. Try to flash stock recovery. If not working, then flash stock firmware.
Thanks @Botar230!
I didn't see your comment until just now after deciding to edit this post since I've gotten a step closer to restoring my device.
Your solution was the method I used although I didn't know my phone model, so I found a random solution which just worked for my device, and the eRecovery seems to be downloading the stock firmware anyways. Thanks again
Before flashing this lineage os you should update to EMUI8 to get treble support, i suppose you was running EMUI5, hence the error mode.

the current image(boot/recovery) have been destroyed and can not boot. Please help

Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
flash stock recovery through fastboot. Then again install twrp custom recovery through fastboot. Then install stock zip rom by flashing through twrp. You can get stock recovery and stock rom from the following link.
https://forum.xda-developers.com/realme-3-pro/how-to/guide-to-stock-rom-stock-recovery-t3940604
fix
kisutbener said:
Hi
Please i need help
I want to unlock bootloader and flash TWRP & Magisk on my realme 2 pro 4/64, after i flash all items, my phone was bootlop
Then i tried to relock bootloader, after that, my phone cannot boot and only showed this message.
"the current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it"
how can i fix it?
note : i attached images of the problem, thats not my pictures, i save from the pther person who have the same problem. but i can find the best solution
thank you very much
Click to expand...
Click to collapse
have you fixed?how
Bootloop please help asap!!
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap??? I can't leave without my phone in this lockdown
davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap I can't leave without my phone in this lockdown
Click to expand...
Click to collapse
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
davsagar4 said:
I was trying to install custom rom but I didn't took back up and wiped every thing on internal memory and also flashed stock recovery of realme 2 pro LOCKED the bootloader also I was hoping that I would be able to install stock rom by realme . But now am stuck at bootloop only realme logo appers
Basically I only have stock recovery on my phone and nothing else in the internal no OS installed bootloader is also locked so am not able to install twrp recovery to please help me install any rom .I am stucked due to lockdown no Service center is open. Please help asap
Click to expand...
Click to collapse
He_man_r35 said:
Possible 100% solution, but it's paid.(800 inr)
In my case I'm fully locked (by vol down and power,vol up and power,both up down and power) i only see error..(no fastboot windows)
So to overcome this you need to pay someone some money (i paid 800,for oppo special I'd and password for 1 time),and download a compatible firmware (rom) and msm download tool in pc make sure you also have team viewer, as damn oppo won't allow you to flash firmware for free ad there is no crack for msmtool...hope this helps.. i also did this process during lockdown and learned a moral:-never relock bootloader
Qfil and other processes doesn't worked for me?
Don't wast time in crackes etc there is no official crack of realme 2 pro firmware bcoz there is always a different tool for each rom???..
I waited to fix this for 27 days.
Click to expand...
Click to collapse
hey can you provide me that person's contact info?

Bricked Nokia 6, need help flashing back to stock

I believe we all know here how hard flashing Nokia 6 phones are... they are unbelievably a PITA.
I have a TA-1025 Nokia 6, 7.1.1 Nougat. I have been trying to fix it for 3 days now with no success. Originally tried to reflash stock boot image at first with little success so I could flash Magisk. Ended up wiping out entire System partition and trying to reflash, getting nowhere. I then flashed a B02_Homebrew.zip which ended up with stock recovery and no root at all (and no ability to flash magisk despite having unlocked bootloader. great.) Downgraded bootloader again and am now stuck and unsure how to proceed.
Note I CANNOT get QFil to work without EDL mode, which requires me to tear my phone apart.
Any suggestions? Does anyone have any certified knowledge of how to fix and reflash stock Nokia 6? I don't want to take it to a dealer because they will update it and make it unrootable (and probably won't be able to even touch it since bootloader is unlocked.)
ATM, all I can boot to is TWRP recovery or Download Mode.
Help?
Dantheman221 said:
I believe we all know here how hard flashing Nokia 6 phones are... they are unbelievably a PITA.
I have a TA-1025 Nokia 6, 7.1.1 Nougat. I have been trying to fix it for 3 days now with no success. Originally tried to reflash stock boot image at first with little success so I could flash Magisk. Ended up wiping out entire System partition and trying to reflash, getting nowhere. I then flashed a B02_Homebrew.zip which ended up with stock recovery and no root at all (and no ability to flash magisk despite having unlocked bootloader. great.) Downgraded bootloader again and am now stuck and unsure how to proceed.
Note I CANNOT get QFil to work without EDL mode, which requires me to tear my phone apart.
Any suggestions? Does anyone have any certified knowledge of how to fix and reflash stock Nokia 6? I don't want to take it to a dealer because they will update it and make it unrootable (and probably won't be able to even touch it since bootloader is unlocked.)
ATM, all I can boot to is TWRP recovery or Download Mode.
Help?
Click to expand...
Click to collapse
just download the Full OTA update in the thread section.
must downgrade first ur recovery to nougat then install update via recovery.
You can use TA-1021.
If you want Nougat Ver. then use Nokia OST.
Dantheman221 said:
I believe we all know here how hard flashing Nokia 6 phones are... they are unbelievably a PITA.
I have a TA-1025 Nokia 6, 7.1.1 Nougat. I have been trying to fix it for 3 days now with no success. Originally tried to reflash stock boot image at first with little success so I could flash Magisk. Ended up wiping out entire System partition and trying to reflash, getting nowhere. I then flashed a B02_Homebrew.zip which ended up with stock recovery and no root at all (and no ability to flash magisk despite having unlocked bootloader. great.) Downgraded bootloader again and am now stuck and unsure how to proceed.
Note I CANNOT get QFil to work without EDL mode, which requires me to tear my phone apart.
Any suggestions? Does anyone have any certified knowledge of how to fix and reflash stock Nokia 6? I don't want to take it to a dealer because they will update it and make it unrootable (and probably won't be able to even touch it since bootloader is unlocked.)
ATM, all I can boot to is TWRP recovery or Download Mode.
Help?
Click to expand...
Click to collapse
my Nokia 6 phone is also bricked. Please share if you find a solution.
Dantheman221 said:
I believe we all know here how hard flashing Nokia 6 phones are... they are unbelievably a PITA.
I have a TA-1025 Nokia 6, 7.1.1 Nougat. I have been trying to fix it for 3 days now with no success. Originally tried to reflash stock boot image at first with little success so I could flash Magisk. Ended up wiping out entire System partition and trying to reflash, getting nowhere. I then flashed a B02_Homebrew.zip which ended up with stock recovery and no root at all (and no ability to flash magisk despite having unlocked bootloader. great.) Downgraded bootloader again and am now stuck and unsure how to proceed.
Note I CANNOT get QFil to work without EDL mode, which requires me to tear my phone apart.
Any suggestions? Does anyone have any certified knowledge of how to fix and reflash stock Nokia 6? I don't want to take it to a dealer because they will update it and make it unrootable (and probably won't be able to even touch it since bootloader is unlocked.)
ATM, all I can boot to is TWRP recovery or Download Mode.
Help?
Click to expand...
Click to collapse
First flash stock recovery, then boot into stock recovery and flash latest OTA
Link for latest OTA got from Telegram (TA-1025 ) : https://android.googleapis.com/packages/ota-api/package/5d91fc596557fecf1ba49b9321b446c64e3acd06.zip
Note :Your bootloader will be remained unlocked. don't worry
Sharashchandra said:
First flash stock recovery, then boot into stock recovery and flash latest OTA
Link for latest OTA got from Telegram (TA-1025 ) : https://android.googleapis.com/packages/ota-api/package/5d91fc596557fecf1ba49b9321b446c64e3acd06.zip
Note :Your bootloader will be remained unlocked. don't worry
Click to expand...
Click to collapse
I'm stuck in EDL mode now, any fixes or tips on how to flash/patch? QFIL is saying 'Failed to switch to EDL Mode'
Dantheman221 said:
I'm stuck in EDL mode now, any fixes or tips on how to flash/patch? QFIL is saying 'Failed to switch to EDL Mode'
Click to expand...
Click to collapse
Is phone is totally dead?? what you are getting when you insert charger? how pc is detecting your device (go to device manager)?
Sharashchandra said:
Is phone is totally dead?? what you are getting when you insert charger? how pc is detecting your device (go to device manager)?
Click to expand...
Click to collapse
It shows up as a QualComm COMM port device. But before you get your hopes up, every time I have tried to flash it, it says "Failed to switch to EDL mode" :-/.

Categories

Resources