Related
Hey guys,
I know there are threads like this all over this forum, but as I tried everything that was described in different threads and nothing worked, i just made up a new one... sorry for that.
Some days ago my home button just stopped working for no reason. I was at the latest CyanPop nightly and apart from scanning FP, everything worked fine. The FP-Error is known to CM13 because of the drivers etc so i was aware of that.. I was getting home from work when suddenly my home-button stopped working for no reason. I thought it might be due to the custom rom etc, so i went back to OxygenOS 2.2.0 but it still didn't work out.
What I tried for now:
full wipe
flashing Oxygen OS 2.0.2 and 2.0.3
installing stock modem, firmware, kernel rom and recovery
as OP support told me: unhide Google Search Bar
hard reboot (holding powerbutton until it reboots)
I still don't know if it's a hardware related error, but I really hope it's not. I bought my OP2 in the official OnePlus Store in Beijing when I was on holiday in China. I already got in contact with the OnePlus support, but they said there is no warranty for the OnePlus Two China Edition (can anyone confirm that..?), so i don't think they're not going to repair it, not even if i pay for it.
So, does anyone know what else I could try (software AND hardware related!)? Is there a way to buy a new FP-Sensor/Home-Button and replace it manually? Every smartphone-repair-store in my area told me that they don't have spare parts for OnePlus devices...
I really hope someone can help me with this!
Thanks in advance,
Neo
Hello community.
I'am having too many issues with muy OnePlus 2 (A2005).
On oxygenos doesn't work sensors (gyro,accel,proximity) and after a time lf use touch became unusable
On hydrogen OS doesn't work fingerprint unlock (lets me add fingerprint but cant unlock) anyway this os doesn't like me.
Actually i install cm13 and im having same issues than oxygen , touch sometimes became unusable (for some seconds) , sensors doesn't works , camera open but i cant see anything , gyroscope doesn't works.
If its possible, i want to stay con cm13
Sorry for my english and thank you so much.
Regards from Argentina
Flash latest OOS 3.1 using the Qualcomm tool, that should restore the persistent partition needed to get the sensors running again and maybe fix the fingerprint reader unless yours is broken hardware wise like many others.
Regards from Sweden
pitrus- said:
Flash latest OOS 3.1 using the Qualcomm tool, that should restore the persistent partition needed to get the sensors running again and maybe fix the fingerprint reader unless yours is broken hardware wise like many others.
Regards from Sweden
Click to expand...
Click to collapse
Which tool? QFIL?
Use the search function young Skywalker.
Pride, thank you so much for the answer. I install SkyDragon and all works perfectly except touch, firsts moments it works fine, but after a few minutes it comes to have issues half (and more) of the taps cannot be readed. I think your answer gonna be usefull for that too. Im going to try, maybe it's because my device was hardbricked and i restore it. Gonna try your method, any specific name of the tool? there's a few of tools by qualcomm. Anyway, im going to keep searching. Thanks again
PD: Curiously, touch works good in Hydrogen.
Okey , if i do the process for hardbrick and install Oxygen 2.x the touch works great. The problem is when im doing upgrade to android 6, because i need to install a patch https://www.androidfilehost.com/?fid=24421527759880815 . otherway , it doesn't let me upgrade. After that patch comes the issue. For the moment, im going to keep on 2.x and install OTA.
EDIT: Upgrade OTA and keep having the same issue.
Edit2: after updating ota i installed google now launcher and works okey. I think the problema is with OnePlus Launcher
I tried now lineage, xenon hd and resurrection. In every 7.1.2 ROM I am unable to get the network based location.
Unfortunately the only way I I know to read this battery saving location is by using tasker(which need to work for me)
Google maps is working without GPS. But I think just because near WiFi.
Can anyone check to read the network based location with tasker in a 7.1.2. ROM?
I already checked my APN settings,my sim card and the android right policies for tasker.... No luck at all
It seems that you have similar problem like me and others:
"Network Location Provider" doesn't work with up-to-date Google Play Services
Location not correct when indoors
Thanks for the links. And indeed, it seems like the same problem.
What surprises me is that this bug dont appeal to this community here. For me it is an important feature of google service which we cant use with our OP2.
Furthermore i dont understand why this bug seems to be a bug according to our device.
For me it is ja software bug with no relation to our hardware?
I hope this error gets more pushed soon
mr_krabbs said:
...Furthermore i dont understand why this bug seems to be a bug according to our device.
For me it is ja software bug with no relation to our hardware?..
Click to expand...
Click to collapse
For me, this is also a big problem, because I often need to see geotags in my picture where I made this or that photo. But geotags are not recorded in photos, but if they are recorded, then only one place even if I have already passed 2 kilometers.
There are two solutions - to put Google-camera, but there is very dark video in case of insufficient illumination, the second - to put another ROM. I tried almost all the firmware and only two did not have problems:
Resurrection Remix M [5.7.4]
LineageOS 13.0
But one more problem because of which I will soon change my OP2 is a poor autonomy.
mr_krabbs said:
I tried now lineage, xenon hd and resurrection. In every 7.1.2 ROM I am unable to get the network based location.
Unfortunately the only way I I know to read this battery saving location is by using tasker(which need to work for me)
Google maps is working without GPS. But I think just because near WiFi.
Can anyone check to read the network based location with tasker in a 7.1.2. ROM?
I already checked my APN settings,my sim card and the android right policies for tasker.... No luck at all
Click to expand...
Click to collapse
Just flash latest stock firmware , I.e. 3.6.0 for op2 solved my problem hope it does yours
veeranna said:
Just flash latest stock firmware , I.e. 3.6.0 for op2 solved my problem hope it does yours
Click to expand...
Click to collapse
Thanks. As far as i know the 3.6.0 updates is based on Android 6.0.1. and therefore no android 7.1.x
However you are right, it seems to be the only fix for now. No Android 7 With this feature.
I am just wondering why
mr_krabbs said:
Thanks. As far as i know the 3.6.0 updates is based on Android 6.0.1. and therefore no android 7.1.x
However you are right, it seems to be the only fix for now. No Android 7 With this feature.
I am just wondering why
Click to expand...
Click to collapse
Just flash firmware file not whole rom. Then flash your desired ROM and Gapps
[Q] firmware flash
veeranna said:
Just flash firmware file not whole rom. Then flash your desired ROM and Gapps
Click to expand...
Click to collapse
i am struggling with how to flash a firmware
my source for the firmware is:
https://www.androidfilehost.com/?w=files&flid=53150
when i flash the firmware 3.6.0 in twrp my sim card isnt recognized anymore
if i use the app "[root] FlashFire" i can see i have a new version of baseband but still no luck with the network based location
How do u flash your firmware?
Edit: I did a clean flash
1. firmware
2. latest aospExtended rom
3.gapps
4. magisk and root
i have a new baseband now. but for me my network location is always in the middle of germany. It is not even close to my postion =)
mr_krabbs said:
i am struggling with how to flash a firmware
my source for the firmware is:
https://www.androidfilehost.com/?w=files&flid=53150
when i flash the firmware 3.6.0 in twrp my sim card isnt recognized anymore
if i use the app "[root] FlashFire" i can see i have a new version of baseband but still no luck with the network based location
How do u flash your firmware?
Edit: I did a clean flash
1. firmware
2. latest aospExtended rom
3.gapps
4. magisk and root
i have a new baseband now. but for me my network location is always in the middle of germany. It is not even close to my postion =)
Click to expand...
Click to collapse
Clean installed
Flashed firmware and then RR ROM and gapps wipe cache dalvik cache that's it and one thing don't flash magisk with RR rom had terrible delay in first boot u can flash anytime after first boot this is what I have done and I'm from India and no network issue volte working fine
Hi, I bought an used 2014817 unit, the owner said that he has replaced the touchscreen before
The weird thing is, the latest twrp doesnt always register my touch, most of the time, I tap the screen without any reaction from the twrp, but sometimes it works, it can register my tap easily
While the previous twrp 2.8.7, didnt have this problem at all
How to fix this ? Bad drivers ?
Try flashing miui fastboot rom....it will fix the broken drivers...
Paleskin said:
Hi, I bought an used 2014817 unit, the owner said that he has replaced the touchscreen before
The weird thing is, the latest twrp doesnt always register my touch, most of the time, I tap the screen without any reaction from the twrp, but sometimes it works, it can register my tap easily
While the previous twrp 2.8.7, didnt have this problem at all
How to fix this ? Bad drivers ?
Click to expand...
Click to collapse
Yeah, the replaced touchscreen must be a replica. So bad drivers should be the case. If there's an official xiaomi agent near you, you should ask them to replace it or try finding an original touchscreen for RM2.
I'm guessing you've been facing frequent SoD's (Screen of Death that makes you have to force reboot the device) and unresponsive touchscreen when the device is trying to wake from sleep (ex: pressing power button). SoD's occurs because of the proximity sensor that is attached to the replica screen is buggy.
I used to have the same problems, but it got fixed. I bought a dead original Redmi 2 and right away I started switching parts from the dead redmi 2 to my redmi 2. Salvaging parts that I've tested and arent using right now, and replacing bad parts. Extra info: RM 2's Touchscreen isn't sold by piece. You gotta buy the whole package, from LCD to TS and Proximity.
Try reading an old ROM thread by @ketut.kumajaya (CM 12.1-13), there you'll find tons of information about buggy parts of your redmi 2. Starting from eMMC to Proximity sensors, because RM 2 are sometimes shipped with different parts inside it.
and one more thing, your thread should be posted in Q&A section, just reminding you mate!
Good luck!
So my best option right now is to go back to miui based custom rom and twrp 2.8.7, since I encountered no errors with them, thankz very much mate
Paleskin said:
So my best option right now is to go back to miui based custom rom and twrp 2.8.7, since I encountered no errors with them, thankz very much mate
Click to expand...
Click to collapse
By all means yes if you don't have the leisure to do what I just posted (Changing your replica screen to an original RM2 screen). If you do plan on using MIUI based ROM, I suggest you to sneak a peek at xiaomi.eu and download the latest rom for Redmi 2 (running MIUI 8.2 with LP-bootloader). Best performance for MIUI.
Or if you are the 1 GB RAM variant of RM2, Try going for Kitkat MIUI 8 (with KK bootloader). I'll be praying that SoD's and other bugs won't occur while you're on KK and using that replica screen of yours.
I've been on this phone for a year, and at last when I fixed it (with the methods in my last post), I fully unlocked all customization for RM2, please do consider my methods if you are going to settle with RM 2 for a while or you're facing the same bugs that I used to.
Good luck!
ezrawk said:
By all means yes if you don't have the leisure to do what I just posted (Changing your replica screen to an original RM2 screen). If you do plan on using MIUI based ROM, I suggest you to sneak a peek at xiaomi.eu and download the latest rom for Redmi 2 (running MIUI 8.2 with LP-bootloader). Best performance for MIUI.
Or if you are the 1 GB RAM variant of RM2, Try going for Kitkat MIUI 8 (with KK bootloader). I'll be praying that SoD's and other bugs won't occur while you're on KK and using that replica screen of yours.
I've been on this phone for a year, and at last when I fixed it (with the methods in my last post), I fully unlocked all customization for RM2, please do consider my methods if you are going to settle with RM 2 for a while or you're facing the same bugs that I used to.
Good luck!
Click to expand...
Click to collapse
Nah, I done wasting money on r2, I was in minovo cusrom kitkat before, and no problem encountered, so I'll just go back to minovo then, thanks
Paleskin said:
Hi, I bought an used 2014817 unit, the owner said that he has replaced the touchscreen before
The weird thing is, the latest twrp doesnt always register my touch, most of the time, I tap the screen without any reaction from the twrp, but sometimes it works, it can register my tap easily
While the previous twrp 2.8.7, didnt have this problem at all
How to fix this ? Bad drivers ?
Click to expand...
Click to collapse
Try this TWRP
https://www.androidfilehost.com/?fid=745425885120756050
nadifzidane said:
Try this TWRP
https://www.androidfilehost.com/?fid=745425885120756050
Click to expand...
Click to collapse
Works perfectly, thanks
You got any fix for sod issue on lineage 14.1 too ?
nadifzidane said:
Try this TWRP
https://www.androidfilehost.com/?fid=745425885120756050
Click to expand...
Click to collapse
Hi, where have you seen this link? I would like to learn more about the source of this TWRP before flashing it.
Hi.
I don't know why, but information about unofficial release of LOS never have been posted here. If there's some legal issues, just delete my post. I have 18.1 running perfectly on my nitrogen. Maybe this is good moment to revive some of our old big nitrogens
Enjoy. It's really great.
Download and Install Lineage OS 18.1 on Xiaomi Mi Max 3 (Android 11)
In this tutorial, we will show you how to download and install Lineage OS 18.1 on Xiaomi Mi Max 3 (nitrogen) device. The Google-owned
www.getdroidtips.com
Cheers
linus207 said:
Hi.
I don't know why, but information about unofficial release of LOS never have been posted here. If there's some legal issues, just delete my post. I have 18.1 running perfectly on my nitrogen. Maybe this is good moment to revive some of our old big nitrogens
Enjoy. It's really great.
Download and Install Lineage OS 18.1 on Xiaomi Mi Max 3 (Android 11)
In this tutorial, we will show you how to download and install Lineage OS 18.1 on Xiaomi Mi Max 3 (nitrogen) device. The Google-owned
www.getdroidtips.com
Cheers
Click to expand...
Click to collapse
Can't you detect any bug?
It would be good to follow up on its correct operation
Thanks for the info
Voretmv said:
Can't you detect any bug?
It would be good to follow up on its correct operation
Thanks for the info
Click to expand...
Click to collapse
I can't detect any bug. Everything is just great. I highly recommend los. It's way more smooth and battery friendly than miui 12.
Does gcam work?
landsome said:
Does gcam work?
Click to expand...
Click to collapse
It's actually default camera app.
linus207 said:
It's actually default camera app.
Click to expand...
Click to collapse
I've just installed it myself - the latest JoysKo version from 4pda.ru. Have not tested it thoroughly, though. Will report more soon. But...
GCam works. After having tried some two dozen versions (which either stopped immediately or did not install at all), I used MGC_6.2.030_FinalRelease_Bulkin043_V9Q, which is known to work on AOSP-9 based custom roms. I am not entirely sure it's perfect, but the basics work. (One may have to change the saving location, though.)
The only issue so far once fully booted - but I barely tested it - is that I seem to have deep sleep problems with third-party launchers (Nova, Lawnchair 2 etc.); Trebuchet works. It does not seem to be caused by widgets - but I need to explore more.
Another problem is common from AOSP9-based 3rd party roms: sometimes, on rebooting, the phone gets stuck (the "Unlocked" logo phase). A simple restart resolved it.
I have not sorted out passing SafetyNet yet (Magisk props fingerprints are apparently not enough).
Happy to report the terrible scrolling issues plaguing AOSP9-based roms here on XDA are completely absent.
Finally, battery life, even without deep sleep, is very good.
How did you recognized deep sleep issue? I am currently running Lawnchair 2 having 94% deep sleep while screen off.
Maybe it's gapps issue/play services? I am using open gapps test version for 11.
linus207 said:
How did you recognized deep sleep issue? I am currently running Lawnchair 2 having 94% deep sleep while screen off.
Maybe it's gapps issue/play services? I am using open gapps test version for 11.
Click to expand...
Click to collapse
Same gapps here. I use Accu Battery and it reports it. I have the same problem if very unreliable sleep on two other phones using los18.
This thread deserves more views. I happened to try the android 11 based Havoc rom from April 2021 and it runs smooth. Everything works perfectly, and I've been using it as a daily driver for the last week.
Thank you JoysKo!
If anyone can point me how to replace the stock cam with gcam- it would be much appreciated!
Voretmv said:
Congratulations on your work. I have this Rom installed on my Mi Max 3, and I am very happy.
Do you have any evolution of this Rom that I am not aware of?
I currently have Lineage-18.1-FORK-vanilla-20210124-nitrogen-JoysKo installed
Click to expand...
Click to collapse
I tried the more recent versions of LOS uploaded by JoysKo and reverted to 0124. For me, it's the best. With the 2 others I had janky scrolling, malfunctioning gestures.
Vandetta187 said:
This thread deserves more views. I happened to try the android 11 based Havoc rom from April 2021 and it runs smooth. Everything works perfectly, and I've been using it as a daily driver for the last week.
Thank you JoysKo!
If anyone can point me how to replace the stock cam with gcam- it would be much appreciated!
Click to expand...
Click to collapse
With the LOS 20210124, I just installed one of the few working gcams. Specifically 6.2.030 Final Bulkin043 V9Q.
landsome said:
With the LOS 20210124, I just installed one of the few working gcams. Specifically 6.2.030 Final Bulkin043 V9Q.
Click to expand...
Click to collapse
Yeah I tried that one you mentioned however I get app not installed error message.
Is there another version that might work?
Vandetta187 said:
Yeah I tried that one you mentioned however I get app not installed error message.
Is there another version that might work?
Click to expand...
Click to collapse
I tired several that did not. Works for me on Lineage-18.1-FORK-vanilla-20210124-nitrogen-JoysKo, though. (I installed both newer versions of the ROM and as far as I remember it worked on them too - but I replaced them later.)
Thank you so much for this thread. Installing Lineage is like a walk in the park like this. The only problem I come across is when I want to play back videos in some apps or Chrome. I get errors like video can not be played and SOURCE_STREAM_TYPE_NOT_SUPPORTED. I think this might be a firmware issue or is there another solution available?
Hello together
With last Lineage OS 18.1 fork-vanilla I've problems with loosing fingerprints after a while and GBoard-function with full NikiGapps is buggy.
Now I'm back to preversion and fingerprint problems are solved. Only changing to GBoard was not so good idea
linus207 said:
Hi.
I don't know why, but information about unofficial release of LOS never have been posted here. If there's some legal issues, just delete my post. I have 18.1 running perfectly on my nitrogen. Maybe this is good moment to revive some of our old big nitrogens
Enjoy. It's really great.
Download and Install Lineage OS 18.1 on Xiaomi Mi Max 3 (Android 11)
In this tutorial, we will show you how to download and install Lineage OS 18.1 on Xiaomi Mi Max 3 (nitrogen) device. The Google-owned
www.getdroidtips.com
Cheers
Click to expand...
Click to collapse
I installed arrow and Los but all meet same problem. The message can not be received. Try to install global FW+ vendor at first but Stuck on the boot screen . Any good suggestion?
Hi, I was also very pleased to see Lineage on the Mi Max 3, still using this device due to the large screen I love.
Has anyone exerperienced bluetooth connection issues?
It connects to my speaker and then immediately disconnects and of course then wont play any music?
ROM version I used is lineage-18.1-20210608-nitrogen-experimental-PRGroup.zip
Any known fix as yet?
Previous versions do not have bluetooth issues like this?
Thanks.
dhodson7171 said:
Hi, I was also very pleased to see Lineage on the Mi Max 3, still using this device due to the large screen I love.
Has anyone exerperienced bluetooth connection issues?
It connects to my speaker and then immediately disconnects and of course then wont play any music?
ROM version I used is lineage-18.1-20210608-nitrogen-experimental-PRGroup.zip
Any known fix as yet?
Previous versions do not have bluetooth issues like this?
Thanks.
Click to expand...
Click to collapse
Update on this bluetooth issue....
I have wiped and installed this rom now
Lineage-18.1-FORK-vanilla-20210124-nitrogen-JoysKo.zipall works fine now....
still interested if anyone has a resolution to the BT issue though?
The latest of the latest versions of Lineage 18.1: https://t.me/MiMax3Update/211
Many problems have been fixed in it. It is advisable to install cleanly...
Regard, JoysKo.
P.S.: For DT2W use this module…
JoysKo said:
The latest of the latest versions of Lineage 18.1: https://t.me/MiMax3Update/211
Many problems have been fixed in it. It is advisable to install cleanly...
Regard, JoysKo.
P.S.: For DT2W use this module…
Click to expand...
Click to collapse
Thanks. Got it from Telegram a few days ago. I can confirm it works great. Better than the January version, which was the best before in my view. Do try to install from Orange Fox, however, not TWRP.