Not sure if this has been mentioned by anyone yet...
Noticed the new dock which has just been released automatically displays the clock when phone is placed in the dock. If you actually start the clock application manually, and are on usb/mains power, then the clock will remain on the screen and the screen will not auto turn off as normally happens. After a short while, couple of minutes, the display dims and a screensaver type clock slowly moves around the screen. Touching the screen makes the main clock application re-appear. All without the dock
i heart this phone
yup, thats the way they designed it.
The 3 pins at the bottom are probably:
+5v (red)
Ground (black)
Dock Sensor
saquib said:
Not sure if this has been mentioned by anyone yet...
Noticed the new dock which has just been released automatically displays the clock when phone is placed in the dock. If you actually start the clock application manually, and are on usb/mains power, then the clock will remain on the screen and the screen will not auto turn off as normally happens. After a short while, couple of minutes, the display dims and a screensaver type clock slowly moves around the screen. Touching the screen makes the main clock application re-appear. All without the dock
Click to expand...
Click to collapse
Noticed it too. Can't the screen be damaged by being on all that time?
frandavid100 said:
Noticed it too. Can't the screen be damaged by being on all that time?
Click to expand...
Click to collapse
I think thats why it's moving around to different screen positions...
I'm currently considering exchanging my Note 4 (due to it's sheer size) for the Turbo, but I'm concerned about not having an LED notification.
I did however read that the Active Display works really well with notifications. The thing is, I despise having locked screens on my personal phones (work phones are different story). Does Active Display require a locked screen to work?
livinginavacuum said:
I'm currently considering exchanging my Note 4 (due to it's sheer size) for the Turbo, but I'm concerned about not having an LED notification.
I did however read that the Active Display works really well with notifications. The thing is, I despise having locked screens on my personal phones (work phones are different story). Does Active Display require a locked screen to work?
Click to expand...
Click to collapse
what do you mean with locked screen?
pattern security?
i can tell from my previous droid maxx that active display works on locked by pattern or unlocked phone. and you can even choose to show the notification or just the app. (i.e. active display showing the whatsapp message you just got or just the whatsapp icon to let you know that you have a new message.)
livinginavacuum said:
I'm currently considering exchanging my Note 4 (due to it's sheer size) for the Turbo, but I'm concerned about not having an LED notification.
I did however read that the Active Display works really well with notifications. The thing is, I despise having locked screens on my personal phones (work phones are different story). Does Active Display require a locked screen to work?
Click to expand...
Click to collapse
Yes, it works if you don't have any lock screen setup. Actually it works better (definitely faster) imo because Active Display just opens up the app right away, when you scroll up with the notification icon. Otherwise, you scroll up on the AD icon, then get stuck having to enter your password/pin, and finally the app opens up.
As others said, you do not need security for Active Display, if it works anything like the Moto X.
I use Tasker and Secure Settings to toggle PIN lockscreen when I'm on home WiFi. If I leave home, my lockscreen is reactivated, but Active Display still works. I usually don't leave my phone sit long enough to lock during the day (30 minutes), but if it does lock, swiping the active display brings you to the lockscreen to put in your PIN. It's not the same as the normal lock screen, it's like a "popup" that only shows the keypad. It does not show the clock, alarms, etc (which I think is actually just the stock lockscreen widget).
If lockscreen is off, swiping the Active Display takes you straight to the home screen.
Hope this helps.
having swapped out my GS3 (worst phone i ever owned) for a Droid Maxx last year i can say that Active Display (now Moto Display i think?) is the greatest thing ever!...I was worried about losing the LED notification back then, but active display is just plain better...
and now it does not require a lock screen setup afaik
Thanks for the input guys, but I'm not sure if I understand how this works.
On my GS3 (and now Note 4) I turn off my locked screen so that once I click on the power button it turns on my non-locked display.
So correct me if I'm wrong. With Active Display it will let me know of any notifications when it senses my hand wave and I won't have to click on the power button to turn on my non-locked display - instead just some kind of tap patten or something?
livinginavacuum said:
Thanks for the input guys, but I'm not sure if I understand how this works.
On my GS3 (and now Note 4) I turn off my locked screen so that once I click on the power button it turns on my non-locked display.
So correct me if I'm wrong. With Active Display it will let me know of any notifications when it senses my hand wave and I won't have to click on the power button to turn on my non-locked display - instead just some kind of tap patten or something?
Click to expand...
Click to collapse
Correct. If there is no lock screen, the Active Display shows the clock and notification icons. On the Moto X you can swipe down to unlock to the home screen, up to go to the app with the most recent notification, or swipe left/right to dismiss the current notifications from Active Display.
Active Display it self sort of serves as a lock screen, just a slide to unlock. If you press the physical power button the phone turns on to the home screen.
But would I still be able to use the power button to go straight to the home screen similarly to the way I have it setup on my GS3 and Note 4?
livinginavacuum said:
But would I still be able to use the power button to go straight to the home screen similarly to the way I have it setup on my GS3 and Note 4?
Click to expand...
Click to collapse
If there was no security method selected, yes.
fury683 said:
If there was no security method selected, yes.
Click to expand...
Click to collapse
Awesome.
And you guys are saying that the Active Display is so great that I'll prefer to turn on my non-locked display with it instead of using the power button?
livinginavacuum said:
Awesome.
And you guys are saying that the Active Display is so great that I'll prefer to turn on my non-locked display with it instead of using the power button?
Click to expand...
Click to collapse
Not sure how else I/we can explain it...
On the Moto X 2013, if you have Screen Lock set to none and Active Display on, you will see notifications on the screen in the order they arrive (most recent is "featured" in the ring, others are shown below it. When you touch the Active Display ring, you swipe up to go to that app/notification. If you swipe down, it just "unlocks" and goes to your home screen. Swipe left or right clears the pending notifications from Active Display. Pressing the power button on the side will go straight to the home screen.
Using Active Display with a security method will do all of those same things, but if your lock screen timeout has surpassed, you will have to put in your PIN/password before you can go to a notification from Active Display. If you press the power button instead of using Active Display, you are taken to the PIN/password screen.
I really only use my power button for turning the screen off, not on. Sometimes I do still use the power button to turn on if there is nothing on the active display. Wen it sits on a table, the screen is all black. If you move the device (even slightly), the clock will show up with an unlock icon, when there are no notifications pending. If there are notifications pending, the screen "breathes" every few seconds (10-15 or so, and I believe it gets less frequent if it sits untouched for a while), flashing the clock and notification icons until you unlock/clear them.
Now, the screenshots of Active Display look different for the Turbo because it shows multiple icons on the screen. Moto X only shows one in a white circle. The screenshots I've seen of Turbo show three. Not sure exactly how they react.
As for if you will use the screen vs. power button, I guess that's up to you.
fury683 said:
Not sure how else I/we can explain it...
On the Moto X 2013, if you have Screen Lock set to none and Active Display on, you will see notifications on the screen in the order they arrive (most recent is "featured" in the ring, others are shown below it. When you touch the Active Display ring, you swipe up to go to that app/notification. If you swipe down, it just "unlocks" and goes to your home screen. Swipe left or right clears the pending notifications from Active Display. Pressing the power button on the side will go straight to the home screen.
Using Active Display with a security method will do all of those same things, but if your lock screen timeout has surpassed, you will have to put in your PIN/password before you can go to a notification from Active Display. If you press the power button instead of using Active Display, you are taken to the PIN/password screen.
I really only use my power button for turning the screen off, not on. Sometimes I do still use the power button to turn on if there is nothing on the active display. Wen it sits on a table, the screen is all black. If you move the device (even slightly), the clock will show up with an unlock icon, when there are no notifications pending. If there are notifications pending, the screen "breathes" every few seconds (10-15 or so, and I believe it gets less frequent if it sits untouched for a while), flashing the clock and notification icons until you unlock/clear them.
Now, the screenshots of Active Display look different for the Turbo because it shows multiple icons on the screen. Moto X only shows one in a white circle. The screenshots I've seen of Turbo show three. Not sure exactly how they react.
As for if you will use the screen vs. power button, I guess that's up to you.
Click to expand...
Click to collapse
Me replying with "awesome" = yourself and others did a superb job explaining everything to me and making this a non-concern for me regarding potentially getting the Turbo.
But totality appreciate you giving me more input on how the Active Display works, especially the breathing aspect.
Regarding using the Active Display to wake up a non-locked screen instead of the power button, I was actually curious to see if there were others who are adjusted to using the Active Display for this purpose and now prefer it over the power button.
Otherwise, I'm now really excited to go demo it tomorrow and see for myself how it works.
Cheers.
I nearly always use the screen gesture to turn on the display, usually to the home screen.
When you move the Moto X at all (I usually just tap it so it rocks to one side on the curved back, or "twist" it slightly while it is laying on the table) the active display comes up. This is usually just to check the time. You can also hold on the unlock ring and see some of the details for the current pending notifications. For example, if Fenix has a notification, I can hold the unlock ring and see the first few bits of the notification to see if I really want to unlock for that or not.
From there I can let go (nothing happens), swipe up to open Fenix, swipe down for home screen, or swipe left/right to clear that notification from Fenix.
You will get used to AD very quickly.
I didn't even think about this phone missing an LED notification. I've got an S3 as well and always have depended upon the different colors to let me know when i get a message/email, etc across the room or my desk while on the charger. I suppose I won't be charging as much anymore but its nice for those that don't keep their phone in their pocket all day. I don't always feel vibrations and am just used to depending on the LED light.
rotorocker said:
I didn't even think about this phone missing an LED notification. I've got an S3 as well and always have depended upon the different colors to let me know when i get a message/email, etc across the room or my desk while on the charger. I suppose I won't be charging as much anymore but its nice for those that don't keep their phone in their pocket all day. I don't always feel vibrations and am just used to depending on the LED light.
Click to expand...
Click to collapse
Yeah, little things like that are borderline panic worthy for some of us. TBH, I find that on average friends who have iPhones take a decent while longer to get back to me than those with Android phones or even Blackberries. Why? Because if they miss a call, sms, or email there's no way of knowing unless they actually physically touch there phone. At least this was the case last time I checked or of course they can always enable "LED Flash for Alerts"....smh.
So coming back to the topic - I gave it some thought and feel like this Active Display is probably an even better option than LEDs.
Instead of the LED notifications on our GS3s lighting up in different colors (the correlation of which I still haven't memorized even to this day), we'll now have Motorola's Active Display which allows for "breathing" when there are notifications. What this does is cause your screen to flash every couple of seconds with notification information. This is awesome because at a glance you'll now know exactly what's going on. So if you're like me and like it when your nearby phone let's you know you may have missed a call, sms, or email then this seems like it'll be quite useful. You also have the option of turning the "breathing" off at night along with managing which apps you wish to work with the AD.
At least I hope that is the case because I've never really spent a lot of time with a Moto X (only briefly on one of my friend's). So for those who are AD vets if I said something that's off please correct me.
This video also helped me understand how it works a little better (so hopefully it'll help you and others who are in the same boat):
This new AD is great and all but a lot of the time when my phone is charging at a friends house or at work, it's across the room. So I don't see anything but an LED helping me track the state from there. I'm still going to get the new phone and figure out how to deal with the difference but I think it's a stupid miss on something obvious from the manufacturer. But what do I know? Maybe it was part of the reason to keep the cost down.
rotorocker said:
This new AD is great and all but a lot of the time when my phone is charging at a friends house or at work, it's across the room. So I don't see anything but an LED helping me track the state from there. I'm still going to get the new phone and figure out how to deal with the difference but I think it's a stupid miss on something obvious from the manufacturer. But what do I know? Maybe it was part of the reason to keep the cost down.
Click to expand...
Click to collapse
Don't think we'll need to be charging our Turbos at a place other than the comfort of our own personal nightstands given the battery capacity we're getting here.
Otherwise, yeah, LEDs are nice to have for when your phone is in a non-nearby situation and you wish to quickly glance at it for an update.
Realized this as I use a timer constantly at work - it'd be really useful to have it show the remaining time on the 2nd screen. Right now all that shows is a little hourglass icon, but I have to unlock the screen to see remaining time.
Same question for me as well. I currently have the Note Edge. My edge displays the countdown time on the edge screen. I was wondering if the V20 has the same capability on the second screen as well?
probably a bit off topic (but not too much)
I use the timer a lot and can't disable the vibration in it nor change the tune (both options are available in the Alarm)....any idea? Of course I'd like to have the timer on the second screen too.
Timer tone can be changed on a rooted device. I'm going to see if I can find Timer vibrate and maybe disable it.
Hi there I get a blue screen the screen shows the time and date nothing else and it doesn't use the bottom 25% of the screen. Its very weird but it seems like a feature I'm enabling by accident as when I get a call it shows the pick up and hang up options. But I'm unable to get out of that mode.
I have attached a screenshot of what happens. And also screenshot of my rom ect..
Kendal21 said:
Hi there I get a blue screen the screen shows the time and date nothing else and it doesn't use the bottom 25% of the screen. Its very weird but it seems like a feature I'm enabling by accident as when I get a call it shows the pick up and hang up options. But I'm unable to get out of that mode.
I have attached a screenshot of what happens. And also screenshot of my rom ect..
Click to expand...
Click to collapse
It is a feature you're enabling by accident. Do you have a magnet anywhere near??
That is the transparent cover display mode, you know those cases with covers that have a small transparent window on them? They have a magnet, and there is a sensor inside of the phone. When you open the lid the screen turns on, and when you close it it locks and goes to that blue screen for some time.
I think you can disable that on the Display settings, not sure.