My experience with "Custom Binary Blocked By FRP / FAP Lock" - Samsung Galaxy S7 Guides, News, & Discussion

So everything was working well with my S7 (Helios 7 Rom), but I wanted to try the S8 AOD apk.
After flashing the zip some wierd graphical glitches started appearing on my phone, so I tried to fix them by disabling done options.
Well the issue is, I didn't know that If you disabled​ developer options (or the OEM unlock option specifically) then your phone won't boot as long as you have a custom recovery.
The error you'll get is: "Custom binary vlocked by FRP lock"
(top left corner in red when you're on the samsung text while booting)
The only thing you're​ able to boot into is download mode.
(btw and to quit download mode you'll have to hold vol down home power)
Many people were saying that wiping is the only way to fix this, but i can't wipe as I have important data on the internal storage.
But luckily I was using a stock rom, so I downloaded​ a recent S7 nougat firmware from the general forum here and flashed it with Odin, and what do you know! I was able to boot normally and my internal storage files are all there.
Now to go back to TWRP and custom roms, I have to wipe my internal storage but at least I can backup everything and flash cfroot to get root then backup all my apps with titanium backup (to external storage).
After that just follow this thread:
[ROOT] (Updated) Official Stock Nougat 7.0 (100% Working) - All Exynos Models
https://forum.xda-developers.com/galaxy-s7/how-to/root-official-stock-nougat-7-0-100-t3540765
then you'll be back to twrp and can flash custom roms. (but that procedure will wipe your internal storage.
good luck to everyone, just wanted to share this in case anyone faced the same situation as me.

When flash autoroot by chainfire with odin it doesn't flash.
It says blocked by frp.
How do I flash root on 6.0.1?

3omar7 said:
When flash autoroot by chainfire with odin it doesn't flash.
It says blocked by frp.
How do I flash root on 6.0.1?
Click to expand...
Click to collapse
Before flashing root remove your google account, after root enable OEM unlock then log to account back

Related

[HELP] Having problem installing custom recovery

Hello,
I'm having problems installing custom recovery (both CWM and TWRP). I've already been installing custom recoveries before and then I decided to go fully stock. So, now I've been fully stock for quite a while and today I tried installing custom recovery. In Odin it says "Pass" but no custom recovery installed. I've disabled Reactivation lock and enabled USB debugging. I really don't know what's wrong.
If anybody knows what's the problem, I would really appreciate the help!!!
EDIT: The problem was in official TouchWiz build version. That version (in my case) couldn't been rooted and didn't allow another recovery being installed. I downgraded to BNL9 version, before I was on BOA3 version. You can easily find earlier version on sammobile.com
If you're rooted, use TWRP manager from Play store, few people have this issue, myself included
I just said I went fully stock. So, no. I`m not rooted. But thanks for the advice. Might need it in the future!
AlwaysAndroid said:
Hello,
I'm having problems installing custom recovery (both CWM and TWRP). I've already been installing custom recoveries before and then I decided to go fully stock. So, now I've been fully stock for quite a while and today I tried installing custom recovery. In Odin it says "Pass" but no custom recovery installed. I've disabled Reactivation lock and enabled USB debugging. I really don't know what's wrong.
If anybody knows what's the problem, I would really appreciate the help!!!
Click to expand...
Click to collapse
This happened to me a while back when I had a Galaxy S3, i found a solution, unfortunately, you must be rooted to do this solution.
In this post http://forum.xda-developers.com/showpost.php?p=27597756&postcount=1 you'll find a section that states "Stock Recovery being reflashed after a reboot?" and there is the one solution that worked for me.
If you manage to find any of this files through a file explorer, it means that your ROM is flashing stock recovery on every boot. So you would need root access to rename them.
Thank you very much. I will certainly dig into this and search for it.
U need Root
You'll need root for that project.
I had the same problem.
I took CF-Autoroot and flashed it. Right afterwards I booted again manual into stock recovery mode and wiped cash and dalvik cash. After that -without reboot-
removed the battery for a minute. I reinserted the battery and I booted into download mode and flashed recovery-cwmtouch-6.0.4.7-kgsm.tar.
Finally, to stay off of KNOX, which always is going to bother, you should install an app, called: Knox-Disabler. It doesnt clean the phone from Knox, but it keeps Knox inactive.- :good:
Good luck

OP2 cannot upgrade from Oxygen OS 2.2.1/Cannot flash TWRP versions newer than 3.0.2-0

So.... Pokemon Go has a lot to answer for......
I have run into a really strange problem when trying to install an OTA on my *unrooted* Oneplus 2. I have been trying to fix this for days but I have completely run out of ideas.
I originally had a working stock Oxygen 3 (Marshmallow) rom with TWRP recovery on my device (not sure of the version). The device was rooted and apart from not being able to install OTAs, I was fairly happy with the setup. Then along came the Pokemon GO update that banned rooted devices. Ok, "big deal" I thought. I was quite content playing Ingress instead (a far better game by the way that doesn't rely on a "pay to win" structure). I really wasn't too worried but then I found out about "systemless root" and "Magisk". I thought that if I installed this correctly I could still play a bit of Pokemon GO when I wanted to and could toggle a root button in Magisk Manager to install OTAs when they became available.
This is where the problems started.
I followed a guide on how to unroot and install Magisk and "Phh's Superuser". The problem was that the Phh Superuser was being denied permissions for Magisk Manager, there were no pop up notifications prompting me to give it access, just toast notifications. I couldn't for the life of me figure out how to give it permission so the "enable root" slider button kept sliding back, not allowing root. This is when I used SuperSU ver 2.76 (Magisk version) and it seemed to work fine. I now had a stock Marshmallow rom with TWRP and Magisk Manager all working exactly how they should be. I could toggle root and play Pokemon GO, then return to a rooted state when I needed to.
"Awesome, mission accomplished." I thought. Now I just need to toggle root off, download the latest OTA and install it through Flashfire.
First I made a complete nandroid backup (as I've done with other devices many times before) through TWRP. I even copied the backup folder to my PC in case something went wrong.
Well, this is when the nightmare started.
The first mistake I made was to use Flashfire when it clearly stated that Oneplus devices were currently untested. Not sure if it was a big issue or not, but it was a mistake none the less. The second mistake I made was to not stop the stock recovery being replaced when prompted before the reboot. I assumed (and it even states in the app) that the custom recovery should be reverted back to the stock recovery when attempting to apply OTA updates.
So I went ahead and rebooted, waiting for the OTA to install. I'm fairly sure from memory that it went into the stock recovery, flashed the OTA and restarted.
This is when the phone soft bricked.
"Oh well, that is why I made the backup." I thought.
I reflashed TWRP in fastboot mode and attempted to restore my backup. No dice, the phone was still soft bricked.
(And by "soft bricked" and "boot looping" I mean the Oneplus logo was in the middle of the screen, "Powered by Android" was at the bottom and the two blue LEDs for the buttons either side of the fingerprint scanner/home button remained on. This for me was the tell tale sign of the soft brick because these two light go off after a few seconds after rebooting usually.
So from here I have tried EVERYTHING. All I really want now is a working stock (rooted) Marshmallow rom with TWRP. I have downloaded many different full rom zips and attempted to flash them through TWRP with no success, I have returned to stock recovery and tried flashing signed roms with no success, I've even tried flashing the official CM13 rom for Oneplus 2 (with the correct GAPPs and kernel) through TWRP with no luck.
But here is where it gets interesting......
There are a few things that are really weird...
1. I have always been able to get into Fastboot mode and ADB and Fastboot commands "work".
* Operations succeed but don't stick (for example trying to flash TWRP versions 3.0.2-1 and 3.0.2-2 through Fastboot mode result in no recovery being there at all.
2. I can flash TWRP recovery though Fastboot mode but ONLY VERSIONS 3.0.2-0 and lower. I can also successfully flash the stock recovery.
3. I can flash OxygenOS 2.2.1 but NOT ANY VERSION RELEASED AFTER THAT. Doing so results in the soft brick "bootloop" I mentioned earlier.
4. Attempting to flash the official CM13 rom for Oneplus 2 doesn't work either. Originally I got the error 7 message, but after editing "Updater-script" in the rom and re-zipping, the process seemed to work fine in TWRP but the reboot gave me... you guessed it... a softbrick.
I have flashed custom roms on a few different devices before so I'm not a COMPLETE newbie when it comes to this stuff, but I am by no means a developer or even anything close to one. I have bricked this phone in the past (long story, involved getting it without an invite and it being shipped to me with spyware on it) but I used a guide very similar to this and it worked a treat.
www(dot)androidbrick(dot)com/unbrick-oneplus-one-two-3-qualcomm-hs-usb-qdloader-9008
So, thinking that this process would format all partitions and start me from scatch I tried it. It worked fine but I was still unable to upgrade from Oxygen OS 2.2.1 or install TWRP versions 3.0.2-1 or 3.0.2-2.
I have tried all sorts of things. I have wiped, flashed and wiped again. Factory resets, dirty flashes, clean flashes.... everything. All sorts of different sources for the TWRP images and Oxygen roms... nothing seems to work.
It's just so weird considering it's not a hard brick... just a soft brick.
So I really need my phone so I am sitting on this current build because it is the only one that works.
Here are some details of the current build I am using. (using CPU-Z app)
Model: Oneplus 2 (ONE A2001)
Android version: 5.1.1
Oxygen OS version: 2.2.1
Bootloader: Unknown
Build ID: ONE A2001_14_160226
Java VM: ART 2.1.0
OpenGL ES: 3.1
Kernel Architecture: aarch64
Kernel version: 3.10.49-perf+ (56)
Root access: Yes
Super user app: SuperSU Free v2.46 (Chainfire)
OEM unlocking: Enabled
USB debugging: Enabled
And these are some of the ZIPs and IMGs that refuse to be flashed to my device.
TWRP-3.0.2-1-oneplus2
TWRP-3.0.2-2-oneplus2
Grarak's TWRP recovery IMG for Oneplus2 (modified to install CM13) according to this guide:
missingtricks(dot)net/oneplus-2-official-cyanogenmod-13
cm-13.0-20160924-NIGHTLY-oneplus2
OnePlus2Oxygen_14_OTA_019_all_1606041303_bd42fc5cc5cc4ab2
And also my TWRP backup named 2016-09-16--09-44-09
I am really at a loss as to what to do next. ANY help ANYONE could give me would be greatly appreciated. I have been all over the net looking for ways around this bt have had no luck.
As I've said, I'm not a huge tech head, but I'm not a newbie either. The only thing I can think of is that somehow one of the partitions (maybe boot? ) may have been corrupted somehow when messing around with systemless root. But I don't know how considering it's "systemless". If anyone knows how to check for corrupted partitions on the Oneplus 2 please let me know and I'll try it. Maybe formatting these partitions might help (????), but I don't want to permanently brick my phone.
But I don't know how I've got this particular build working if one of the partitions has been corrupted. And the corrupted partition thing is just a guess.....
Please, anyone, someone point me in the right direction. Again, any and all feddback is welcomed and would be very much appreciated.
This is all Pikachu's fault.
Kamakiriash said:
A very long post...
Click to expand...
Click to collapse
The normal way too update from OOS 2 to OOS 3 is:
Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
Reboot recovery via TWRP so that you now have a recovery that's compatible with the new bootloader
Wipe data, cache & dalvik-cache (but not internal storage)
Flash the OOS 3 signed flashable zip again to update the system
Flash one of the modified SuperSU zips if you want root
Reboot system
All the files you need are in post #1 of this thread.
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Kamakiriash said:
Thank you so much Spannaa!
I was clearly missing a vital step here and let it be a lesson to anyone else in this situation....
As Spannaa said......
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
4. Wipe data, cache & dalvik-cache (but not internal storage)
5. Flash the OOS 3 signed flashable zip AGAIN to update the system.
Again, thankyou Spanna for your quick and accurate response.
The order in which you flash zips and imgs is very important it seems.
You really saved me.
I restored the TWRP backup and I am back to where I started.
Is it now possible to apply OTAs when I toggle the root off in Magisk manager and install using the stock recovery? What do you think would be the best way to do this?
And would it be worth moving to the official build of CM13 for Oneplus 2?
Thanks again, Spannaa. :victory:
Click to expand...
Click to collapse
Glad you're sorted.
Not sure about Magisk as I've never used it.
CM13 is OK but whether it's worth you moving to it is your choice. Personally, I prefer TipsyOS!
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
1. Flash the OOS 3 signed flashable zip via TWRP to update the bootloader and firmware
Click to expand...
Click to collapse
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
2. Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option
3. Reboot recovery via TWRP SO THAT YOU NOW HAVE A RECOVERY THAT'S COMPATIBLE WITH THE NEW BOOTLOADER!
Click to expand...
Click to collapse
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Aood said:
Hi,
I face the exact issue with same Oxygen OS and TWRP versions mentioned, I have tried the above steps but there are some problems:
when I checked the option (Zip signature verification) in TWRP, the installation failed with error "Zip signature verification failed! Error installing zip file '/sdcard/oneplus.zip'", but it's successfully installed when I unchecked (Zip signature verification) option.
second problem is that after installing the TWRP 3.0.2-2 (or above), then reboot recovery, I can't access the recovery again and the phone stuck on bootloop.
any idea ?
Click to expand...
Click to collapse
I don't have a OP2 anymore but that post was seven months ago and the instructions worked for numerous users.
Don't enable zip signature verification in TWRP - it's unnecessary.
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
thanx for replay Spannaa,
Flash TWRP 3.0.2-2 via your current TWRP's recovery image flashing option and then reboot recovery directly from TWRP.
Click to expand...
Click to collapse
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Aood said:
thanx for replay Spannaa,
I have already did that, but same issue once I reboot "directly from TWRP" , the TWRP doesn't show up and bootloop start again.
Click to expand...
Click to collapse
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Last chance and then I'll leave this for someone that has the OP2.
Are you rebooting recovery "directly from TWRP" or rebooting system?
Is your bootloader still unlocked?
Click to expand...
Click to collapse
Yes, rebooting recovery "directly from TWRP"
and bootloader loader is unlocked,..
anyway it's not important to fix the phone, it's almost one year since last time I use it, yesterday I saw it in the drawer and try to figure out the issue..,

Trouble with booting after rooting, help.

Hello everyone, I went to root my phone today, I used a Youtube tutorial with the exact links/downloads given. Followed the steps but my device is having trouble rebooting, it is just stuck on the Samsung logo flashing and I'm not too sure what to do. Also when it boots up I get the error message in the top left of my screen saying "Recovery Is Not Seandroid Enforcing", hopefully that helps.
Thanks.
Hipp0123 said:
Hello everyone, I went to root my phone today, I used a Youtube tutorial with the exact links/downloads given. Followed the steps but my device is having trouble rebooting, it is just stuck on the Samsung logo flashing and I'm not too sure what to do. Also when it boots up I get the error message in the top left of my screen saying "Recovery Is Not Seandroid Enforcing", hopefully that helps.
Thanks.
Click to expand...
Click to collapse
Hard to help if you do not write in detail. Such as phone type, links you have used, etc etc
Hipp0123 said:
Hello everyone, I went to root my phone today, I used a Youtube tutorial with the exact links/downloads given. Followed the steps but my device is having trouble rebooting, it is just stuck on the Samsung logo flashing and I'm not too sure what to do. Also when it boots up I get the error message in the top left of my screen saying "Recovery Is Not Seandroid Enforcing", hopefully that helps.
Thanks.
Click to expand...
Click to collapse
You need to flash SuperSU manually.
1. Flash TWRP
2. Format data
3. Flash SR3-SuperSU-v2.79-SR3-20170114223742.zip
http://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
You simply brick your phone. You need to know that there is not Chainfire-AUTO-Root for Nougat, so you need first flash Stock FIRMWARE from Sammobile, then flash TWRP and flash SuperSU
Or you can flash many of 100 roms with prerooted supersu and busybox.
Hi there,
After upgrading my S7 Edge G935F to stock version xxu1dqd7 (with latest May 2017 upgrades) I had to install TWRP (twrp-3.1.1-0-hero2lte.img) again.
Unfortunately this change will NOT recognise my pattern lock now! I had to re-install the stock image (DBT-G935FXXU1DQEF-20170523093738 with ODIN) using the HOME_CSC file to hold my data.
This re-installation brought me back to the game, but without TWRP and hope for root, but the pattern pin (the same) is now working...
Update 1
Installing TWRP (twrp-3.1.1-0-hero2lte.img) over the new stock image (DBT-G935FXXU1DQEF-20170523093738 with ODIN) without having the pattern lock enabled feature during start will result in stuck on
the samsung title.
Update 2
I had to repeat the step above (stock firmware), so stay now without root.
Will check later with other stock versions
>It seems you didn't format the data partition or dm-verity was not installed. Happened to me, won't boot if >anything is altered like when installing a custom recovery.
Yes, I did it with and without dm-verity, All 3 options,
TWRP (ok, but pattern lock will not recognized)
TWRP + supersu (2.82) (stuck on the samsung logo)
TWRP + supersu (2.82) + dm-verity (stuck on the samsung logo)
Yes, I didn'T format the data partition. Didn't want to lose my data ( Never had a problem to upgrade stock roms on my old S4 and root after).
Before the stock upgrade, I run with the Jan 2017 patch level (I bought this 2 days ago) and was able to root with the above method.
Today I wanted to jump the the latest stock version but run in trouble then.
Update 3
Downgrading to Stockrom from 2017-Jan-30 Germany 7 G935FXXU1DQB3 G935FDBT1DQA8 is not an option (anymore), The system boot up but with lot of errors and it's unresponsable and not usable.
Upgade then to the April patch status (2017-Apr-17 Germany 7 G935FXXU1DQD7 G935FDBT1DQD1) brought me back to operational,
but TWRP + supersu (2.82) + dm-verity (stuck on the samsung logo).
Will try it now with the Februar patch version
Downgrade to the Feb patch status (2017-Feb-23 Germany 7 G935FXXU1DQBX G935FOXJ1DQB2) had the same resut like the Jan version - not usable.
I'll give up now and install the April version without TWRP.
I need root to restore my apps AND data with Titanium Pro.
seppdep said:
Hi there,
After upgrading my S7 Edge G935F to stock version xxu1dqd7 (with latest May 2017 upgrades) I had to install TWRP (twrp-3.1.1-0-hero2lte.img) again.
Unfortunately this change will NOT recognise my pattern lock now! I had to re-install the stock image (DBT-G935FXXU1DQEF-20170523093738 with ODIN) using the HOME_CSC file to hold my data.
This re-installation brought me back to the game, but without TWRP and hope for root, but the pattern pin (the same) is now working...
Update 1
Installing TWRP (twrp-3.1.1-0-hero2lte.img) over the new stock image (DBT-G935FXXU1DQEF-20170523093738 with ODIN) without having the pattern lock enabled feature during start will result in stuck on
the samsung title.
Update 2
I had to repeat the step above (stock firmware), so stay now without root.
Will check later with other stock versions
>It seems you didn't format the data partition or dm-verity was not installed. Happened to me, won't boot if >anything is altered like when installing a custom recovery.
Yes, I did it with and without dm-verity, All 3 options,
TWRP (ok, but pattern lock will not recognized)
TWRP + supersu (2.82) (stuck on the samsung logo)
TWRP + supersu (2.82) + dm-verity (stuck on the samsung logo)
Yes, I didn'T format the data partition. Didn't want to lose my data ( Never had a problem to upgrade stock roms on my old S4 and root after).
Before the stock upgrade, I run with the Jan 2017 patch level (I bought this 2 days ago) and was able to root with the above method.
Today I wanted to jump the the latest stock version but run in trouble then.
Update 3
Downgrading to Stockrom from 2017-Jan-30 Germany 7 G935FXXU1DQB3 G935FDBT1DQA8 is not an option (anymore), The system boot up but with lot of errors and it's unresponsable and not usable.
Upgade then to the April patch status (2017-Apr-17 Germany 7 G935FXXU1DQD7 G935FDBT1DQD1) brought me back to operational,
but TWRP + supersu (2.82) + dm-verity (stuck on the samsung logo).
Will try it now with the Februar patch version
Downgrade to the Feb patch status (2017-Feb-23 Germany 7 G935FXXU1DQBX G935FOXJ1DQB2) had the same resut like the Jan version - not usable.
I'll give up now and install the April version without TWRP.
I need root to restore my apps AND data with Titanium Pro.
Click to expand...
Click to collapse
With the TWRP + supersu root method, no matter what 7.0 stock ROM you use, you will not succeed before you disable boot pin and format data. You can restore data after rooting.
So start with the latest stock ROM that is working 100% for you, flash twrp, format data, flash supersu, and it should work. You have to format data because root and stock rom currently does not work with encryption.
Or even simpler, use the new cf autoroot, however it seems you still have to format data.
I had high hopes that the new cf autoroot nougat binary would work with encryption, but alas it seems it doesnt, at least I had the same wrong pin code at boot issue as with twrp. I havent had time to test it, nor to format data and root, so I am currently not rooted.
doclorenzo said:
With the TWRP + supersu root method, no matter what 7.0 stock ROM you use, you will not succeed before you disable boot pin and format data. You can restore data after rooting.
So start with the latest stock ROM that is working 100% for you, flash twrp, format data, flash supersu, and it should work. You have to format data because root and stock rom currently does not work with encryption.
Or even simpler, use the new cf autoroot, however it seems you still have to format data.
I had high hopes that the new cf autoroot nougat binary would work with encryption, but alas it seems it doesnt, at least I had the same wrong pin code at boot issue as with twrp. I havent had time to test it, nor to format data and root, so I am currently not rooted.
Click to expand...
Click to collapse
Thank you doclorenzo.
I had success with the latest stock version (xxu1dqd7) and your recomendation to format data in TWRP.
In short: Boot in Download mode, Install TWRP via Odin, Boot into TWRP - format data, supersu (2.82) + dm-verity
and then restore all data. Unfortunately it requires lot of time (at least 4 hrs to restore the apps + more for fine tuning)
Thank you and hope to have a better way with the next stock update and TWRP

SM-G531M - FRP can't be disabled when logged into Google

Hi! I have flashed successfully a stock rom of Android 5.1.1 on this device (SM-G531M) using the latest Odin. I enabled the developer options and then OEM Unlock and USB Debugging. Flashed TWRP, everything great. Once TWRP was on my device I installed Magisk following the instructions and no problem. So having root access and TWRP on my phone, really happy that no problems came up on the way, I decide to log into my Google account to update and get some apps and here is when the problems appear. I checked that OEM Unlock is still on and reboot my phone to find that FRP is on and can't boot because of root (can't get in recovery either because TWRP is not the stock recovery), so I flash the device again with the stock rom and find out that I can't remove FRP lock to flash TWRP again. I try removing my google account and FRP is off, so I have to choose:
a) root access and TWRP recovery or
b) Google Account and get new apps or update the ones I have.
Nowhere I looked I could find any answer or anyone having this issue. Can someone tell me what am I doing wrong? I really have no idea why this happens, is a Google update that does this to everyone or what's going on?
Thanks in advance!

S8 Exynos root question

Hi, I wanted to finally root my phone so I followed the Magisk guide but it's prereq. is to install TWRP first and apparently the official S8 firmware which my phone has (Android 9)
triggers 'auto recovery restore system' every time the phone resets effectively making it imposible to enter TWRP mode 'cos it replaces it with stock recovery mode
So the TWRP guide says I can fix this by deleting a certain system file which, you guessed right, requires root...so I'm stuck in a loop
Any ideas how to deal with one or the other? Is using an older root method like SuperSU the only way since flashing an older or custom OS requires TWRP again
Just wanna root my S8 G950F
Shaped65 said:
Hi, I wanted to finally root my phone so I followed the Magisk guide but it's prereq. is to install TWRP first and apparently the official S8 firmware which my phone has (Android 9)
triggers 'auto recovery restore system' every time the phone resets effectively making it imposible to enter TWRP mode 'cos it replaces it with stock recovery mode
So the TWRP guide says I can fix this by deleting a certain system file which, you guessed right, requires root...so I'm stuck in a loop
Any ideas how to deal with one or the other? Is using an older root method like SuperSU the only way since flashing an older or custom OS requires TWRP again
Just wanna root my S8 G950F
Click to expand...
Click to collapse
Sounds like you haven't install twrp correctly.
What guide are you using and how have you actually tried to install twrp.
If using magisk there are two ways of installing, one with twrp one without twrp.

Categories

Resources