Database Users

[Q] International Samsung Galaxy Note 4 Major Issues with Rooting

I bought this unlocked international note 4 with a plan to root it....
However it has already been rooted....
I have ATT for service. The person I got it from had T-Mobile.
When I put my sim in and start it up I can make calls and send text as well as even get online
The problems are as follows:
1. It does not stay connected to the ATT network, I have to repeatedly hit send over and over till it finally makes the call... The same goes for text and the internet...
2. When I made the attempt to re-root the whole thing (mind you I am new to all this rooting...this would only be my second time doing so) I found after downloading all the software needed to do so.... I began to follow the steps provided here on XDA, when I tried to boot with the volume, center, and power key the menu is in Chinese sooooooo
........ So now I'm at a complete loss... I do not know what to do
Please tell me that one of you geniuses out there can help me solve this dilemma.....
I was hoping that just re-rooting this phone would solve my problems........
Thank you guys

Download official firmware for your phone on sammobile.com use odin to install find cf auto root for your phone flash that in odin u should be good to go
Sent from my SM-N910C using XDA Free mobile app

i looked and it didnt have one for America
There was not a firmware for the US so what do I try now

It doesn't have to be from US
Sent from my SM-N910C using XDA Free mobile app
---------- Post added at 07:23 PM ---------- Previous post was at 07:22 PM ----------
RJHUNT1979 said:
There was not a firmware for the US so what do I try now
Click to expand...
Click to collapse
What model do u have
Sent from my SM-N910C using XDA Free mobile app

I have sm-n910f art for service but I believe it has been unlocked cause t mobile and art sims can be read

Sounds like a clone. Download mode should be in English.
Sent from my SM-N910F

AT&T & T-mobile now have the same bootloader version

*I originally posted this in the AT&T S7 forums unintentionally so posting here as well*
For those of you curious about running the T-mobile firmware on the AT&T version of the edge, it is now possible since they are now using the same bootloader version.
I have an AT&T S7 edge (SM-935A) and recently switched to T-mobile as my carrier. I had to unlock it first so I used the service from unlockunit. It took almost a day for the code but I was then able to pop my T-mobile SIM and sure enough, it worked. Surprisingly, WIFI calling even worked!
At this point, I really wanted to switch to the 935U firmware as I heard it has great battery life as all the carrier bloat is removed. Unfortunately, just before I switched, the recent September update from AT&T raised the bootloader to v4. I learned after the fact you have to disable the update service as it eventually will force you to update. Now I was stuck with the damn AT&T firmware!
I wanted to flash the 935U firmware but the bootloader was still at v2 and T-mobile, so I thought, was at v3. It might be helpful to have a sticky on this forum with the current bootloader versions as it took some time for me to research the following:
AT&T - v4
T-mobile - v4
Verison - v4
Sprint - v2?
Universal - v2
Yes, you read that right, T-mobile just released a new firmware (PIA) which raised their bootloader to v4! You can grab it here: http://www.sammobile.com/firmwares/database/SM-G935T/
It's the one with the date of 2016-09-27. I used the prince odin version referenced in this thread for flashing as others failed and gave sha1 errors. http://forum.xda-developers.com/veri...g930v-t3411015
If you plan to do this please research how to flash with odin and remember to back everything up! Samsung Smart Switch is a great resource for this.
I've been running on the new T-mobile firmware for just a day but already like it better than AT&T's. I didn't even know AT&T disabled some features of the S7 edge that other carriers kept. Typical for the Deathstar. Can you sense my disdain for AT&T?
For example, with the T-mobile firmware, you can control Download booster (the ability to leverage wifi and LTE simultaneously!) This option was removed from the AT&T firmware. In addition, you can set a preference to WiFi calling. With the AT&T firmware, you have no control and it will only flip to WiFI when in a weak area. It just so happens where I live the AT&T signal is weak so I was always jumping back and forth between the two and it was frustrating not being able to control it. The only way to force WiFi calling is turn on airplane mode when in a fringe area and turn WiFI back on. I'm so glad I don't have to deal with that anymore.
I'm including some screenshots which show the current firmware running on my SM-935A.
Hopefully we'll see an update to the 935U bootloader to v4 which will allow a switch to that firmware.

Thanks for the info.
Sent from my SAMSUNG-SM-G935A using Tapatalk

Benefit of T-Mobile firmware besides the ones stated. I am on the U firmware. Should I stay or switch to t-MObile.

How did you get to send mms on the u firmware i havent been able to.
---------- Post added at 09:11 PM ---------- Previous post was at 09:10 PM ----------
marcusva79 said:
Benefit of T-Mobile firmware besides the ones stated. I am on the U firmware. Should I stay or switch to t-MObile.
Click to expand...
Click to collapse
did you get the send mms working on u firmware?

So would it be possible to use the t-mobile firmware and still be on ATT or no?
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app

burna said:
How did you get to send mms on the u firmware i havent been able to.
---------- Post added at 09:11 PM ---------- Previous post was at 09:10 PM ----------
did you get the send mms working on u firmware?
Click to expand...
Click to collapse
Looks fine here. I'll do it again
Edit: Sent myself to another MMS and it works fine.
Sent from my SM-G935U using Tapatalk

marcusva79 said:
Looks fine here. I'll do it again
Edit: Sent myself to another MMS and it works fine.
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
yes question is how or what you do to be able to send mms. Thanks

Press the pin icon in messenge app and attach the picture and send away.
Sent from my SM-G935U using Tapatalk

marcusva79 said:
Press the pin icon in messenge app and attach the picture and send away.
Click to expand...
Click to collapse
no sorry im not clear on what im asking lol. im on (U)firmware but i cant send mms and my ims is not registered. if i go back to (A)firmware everything works fine. so the question is first do you have an origianl att phone? and second if so when you flashed the u firm ware did your mms work or did you alter something to get mms working.

My question is if i remain on att and run the tmobile firmware will the wifi calling work?
---------- Post added at 07:53 AM ---------- Previous post was at 07:50 AM ----------
Also, is the root method the same and does it still work with new v4 bootloader?

burna said:
no sorry im not clear on what im asking lol. im on (U)firmware but i cant send mms and my ims is not registered. if i go back to (A)firmware everything works fine. so the question is first do you have an origianl att phone? and second if so when you flashed the u firm ware did your mms work or did you alter something to get mms working.
Click to expand...
Click to collapse
I didnt do anything it work right out of the box. I am on the ATT variant of S7 edge and mms works fine. I havent rooted and will never root this phone. Only thing not working is VOLte, Wifi Calling, and visual voicemail. lve been a nexus user so im used no biggie on them. Have you alter anything? Using any other messaging apk?

marcusva79 said:
I didnt do anything it work right out of the box. I am on the ATT variant of S7 edge and mms works fine. I havent rooted and will never root this phone. Only thing not working is VOLte, Wifi Calling, and visual voicemail. lve been a nexus user so im used no biggie on them. Have you alter anything? Using any other messaging apk?
Click to expand...
Click to collapse
oh ok you arent rooted thats the big missing link lol , im rooted on att variant but have u firmware. sorry thought you were rooted and on u firmware.

So, it sounds like you're saying we can use ATT WIFI Calling after flashing the G930T firmware? Is there anything you lose from G930T? HD Calling for example? Anything else?
Edit: I said 930 because I followed a link here from the 930 forums - I assume it would be the same for the 935, but I'd like to know how it worked on the 935 too.

What are the benefits with the TMOBILE firmware?
Sent from my SM-G935U using Tapatalk

So anybody try t-mobile firmware on att? And does WiFi calling, and volte work ?
Sent from my SM-G935U using Tapatalk

waiting on the same question
dogredwing1 said:
So anybody try t-mobile firmware on att? And does WiFi calling, and volte work ?
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse

It has been written elsewhere that AT&T requires 1) proprietary code [read: ATT ROM] and 2) AT&T-branded phones (IMEI they recognize, also includes some non-ATT such as iPhone/HTC) for advanced calling features to work.
I would bet that VoLTE, WiFi calling, video calling, advanced messaging, etc. do not work with the T-Mo ROM.
On the other hand T-Mo uses more standard VoLTE protocols, etc., so phones like Nexus 6P, 5X, etc. work with VoLTE and WiFi calling just fine on T-Mo.
A bit of history: Even people who got ATT-branded Nexus 6 do not get VoLTE because Google later standardized the N6 ROM therefore without ATT's evil code (and bloat).
ATT has quickly surpassed VZ as the new Evil Empire.

ctalbot said:
I used the prince odin version referenced in this thread for flashing as others failed and gave sha1 errors. http://forum.xda-developers.com/veri...g930v-t3411015
Click to expand...
Click to collapse
I'm getting a dead link, can anybody let me know which prince odin version he was referring to?
EDIT: Nvm got it!

theoddjosh said:
I'm getting a dead link, can anybody let me know which prince odin version he was referring to?
EDIT: Nvm got it!
Click to expand...
Click to collapse
Where did you find the solution, I've tried a couple different versions of odin and no luck. Also, should I be using the "CSC" or "HOME_CSC" in the CSC box?
EDIT: Also figured it out. search for "Verizon S7 / S7 Edge [Root Guide] SM-G930V SM-G935V [NO KNOX TRIP]" in xda to find the correct ODIN version for this.
and the correct file to use in the CSC field is "CSC" even though ODIN says to use the "HOME_CSC"

Do I need to enable OEM unlock?

If you updated and are now limited to 60% here's the fix

My girlfriend got an auto update from T-Mobile on her note 7 and it limited her phone to only charge up to 60%. So I found the stock firmware for the previous version and used Odin to flash it over. I also used package disabler pro to prevent future updates. I will link a download to all files from my Google drive as they took wayyy too long to download off of the original site. It will include, the stock firmware (there's 5 parts) Odin (latest version) and package disabler pro. Hopefully anybody reading this is familiar with Odin but if not please ask any questions I'm sure either I or someone else on here can answer them.
https://drive.google.com/folderview?id=0B0c6ZaGr79eTSUt0NkJOc1VFWTg
http://www.theandroidsoul.com/how-to-install-firmware-on-samsung-galaxy-devices
Above is also a guide on how to use Odin for those of you who arent familiar with it!
UPDATE!!!!
Package disabler pro stopped working for me but after about 2 hours of searching i found a replacement app. The link is below!
https://drive.google.com/file/d/0B0c6ZaGr79eTUGRFWWdOMVRSODQ/view?usp=drivesdk
It allowed me to disable all of the update packages

can anyone confirm this while i wait for files to download

i was wondering the same thing and what order to do them in I don't see why it shouldn't work honestly i just haven't used oden in forever and don't want to screw it up lol

It worked fine on her phone you just have to use the app I provided to disable a few packages to stop auto updates and forced updates. I'll upload a screenshot of which ones to disable

chumba8 said:
i was wondering the same thing and what order to do them in I don't see why it shouldn't work honestly i just haven't used oden in forever and don't want to screw it up lol
Click to expand...
Click to collapse
You'd flash all 5 of the files at once. The slots on the right in Odin are labeled (for example) ap; you'd select the file I uploaded that starts with ap same with bl, csc etc.

For some reason it won't let me post a screenshot but the packages you'll want to disable are the 2 that say Software Update and one that says UrgentFWUpdateTSP

files are done downloading, ill update this post after im done trying this method
Edit: I can confirm this method works, thanks for figuring this out, also got the green battery icon back "note" the odin file OP included does not include a ini file so it does not open, i just downloaded a different one odin v3.11.1

chumba8 said:
i was wondering the same thing and what order to do them in I don't see why it shouldn't work honestly i just haven't used oden in forever and don't want to screw it up lol
Click to expand...
Click to collapse
douglas12107 said:
files are done downloading, ill update this post after im done trying this method
Edit: I can confirm this method works, thanks for figuring this out, also got the green battery icon back "note" the odin file OP included does not include a ini file so it does not open, i just downloaded a different one odin v3.11.1
Click to expand...
Click to collapse
I just uploaded the ini file to the Odin folder. I'm glad this method worked for you ?

What's the difference in csc tmb and home csc? How to place them?
Sent from my SM-G935T using XDA-Developers mobile app
---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
I tried this with the stock PGC firmware and it didn't work. I still have the original pre-ordered note 7.
Sent from my SM-G935T using XDA-Developers mobile app
---------- Post added at 07:00 AM ---------- Previous post was at 06:58 AM ----------
Also one trick I found, the stopped supporting Samsung Pay right? So I used root browser on my s7 edge, copied the apks for SamPay and installed then in the Note...voila version 2.4.02 and it works
Sent from my SM-G935T using XDA-Developers mobile app

You guys realize the next step is to block all Note 7 imei numbers on the network. I too wanted to keep my Note 7 but I need a working device more than I need a Note 7.

Yea but you can always swap IMEI numbers...?
Sent from my SM-G935T using XDA-Developers mobile app

Army of Tracy did you get it working what steps did you use?

ArmyofTracy said:
Yea but you can always swap IMEI numbers...
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse
with the v2 PI4 bootloader? How?

phenixof4 said:
with the v2 PI4 bootloader? How?
Click to expand...
Click to collapse
Not sure about the bootloader, a friend told me about an online service to swap IMEI numbers, he did it when he got a blocked s5
Sent from my SM-G935T using XDA-Developers mobile app
---------- Post added at 10:39 AM ---------- Previous post was at 10:37 AM ----------
chumba8 said:
Army of Tracy did you get it working what steps did you use?
Click to expand...
Click to collapse
The only thing I got working was flashing the PI4, and updating SamPay to 2.4.02. I can't get PGC to flash. That's the one we need, it's pre-recall.
Sent from my SM-G935T using XDA-Developers mobile app

The csc tmb file will be the one you'll want to use under the csc slot in odin

http://www.theandroidsoul.com/how-to-install-firmware-on-samsung-galaxy-devices
Above is a guide to using odin the csc tmb file is the one youll want to use in the csc tab on odin. It will factory reset the phone so if theres anything important on it make sure you back it up on your computer or sd card.

Also i have the note 7 that was available after the recall so im not sure if this will work for the original version of the phone. I can try to find the files for the original version when i get off work lol

Mike_Disturbed_1992 said:
Also i have the note 7 that was available after the recall so im not sure if this will work for the original version of the phone. I can try to find the files for the original version when i get off work lol
Click to expand...
Click to collapse
Thanks, I don't think it will work, for now I'll just be happy with PI4 and able to fully charge it. They must have done something to the bootloader so as not to flash, which makes sense because they don't want you to charge above 60% and they want the phone back...I never had this problem flashing my S5....or S4....[emoji36]
Sent from my SM-G935T using XDA-Developers mobile app

i confirm this works, i did this yesterday and im able to charge back to 100%, however my samsung pay nor wifi calling work anymore.
---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------
Mike_Disturbed_1992 said:
My girlfriend got an auto update from T-Mobile on her note 7 and it limited her phone to only charge up to 60%. So I found the stock firmware for the previous version and used Odin to flash it over. I also used package disabler pro to prevent future updates. I will link a download to all files from my Google drive as they took wayyy too long to download off of the original site. It will include, the stock firmware (there's 5 parts) Odin (latest version) and package disabler pro. Hopefully anybody reading this is familiar with Odin but if not please ask any questions I'm sure either I or someone else on here can answer them.
https://drive.google.com/folderview?id=0B0c6ZaGr79eTSUt0NkJOc1VFWTg
Click to expand...
Click to collapse
what parts did you flash? i only flashed the AP portion, it worked but now my samsung pay or wifi calling dont work, does yours still work? What other portions did you flash?

S3BAZ10 said:
i confirm this works, i did this yesterday and im able to charge back to 100%, however my samsung pay nor wifi calling work anymore.
---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------
what parts did you flash? i only flashed the AP portion, it worked but now my samsung pay or wifi calling dont work, does yours still work? What other portions did you flash?
Click to expand...
Click to collapse
You have to flash the ap, bl, cp, and csc files. My girlfriends wifi calling works fine im not sure about samsung pay we don't use it lol

New Verizon S7 .. need to use on Tmobile (band 12)

Just got a brand new verizon S7 (since my aunt did not want it). I am on Tmobile and have no plans to change to Verizon. I popped in my Tmo sim and it works, but I guess I am still missing Band 12 and maybe wifi calling. It has been a while since I have done custom roms and rooting. I would appreciate some pointers as these are my criteria
1) Need all the bands possible to be used on Tmobile
2) Samsung Pay and android Pay
3) Root is not required for what I do and sometimes my wortk email will not install when it snifs root. (it used to on my S5 2 years ago)
Right now I am on G930VVRS4APH1 (BASEBAND VERSION and build)
Looking for advise on what I should do. I read too much and am confused about being in bootloader V3 or V4 and not able to get back . I am familiar with Odin and TWRP etc, but have notg kept up with the community. With my S6 I have mostly stayed stock.
Help me out folks if you can and especially with links and what firmware and ROM to install.

booziboy said:
2) Samsung Pay and android Pay
Click to expand...
Click to collapse
Don't root if you need this. Samsung Pay gets disabled permanently when Knox is tripped, and Android Pay doesn't work when rooted.

the Doctor said:
Don't root if you need this. Samsung Pay gets disabled permanently when Knox is tripped, and Android Pay doesn't work when rooted.
Click to expand...
Click to collapse
Wrong. Pls give out accurate information. Knox never gets tripped as the kernel we use doesn't check dm-verity. So you Knox will not get tripped . But Sammy pay will not work with root. However Android Pay will work , use cloak from xposed. [emoji12] [emoji318]
Merry Christmas
Sent from my SM-G935V using Tapatalk
---------- Post added at 09:07 AM ---------- Previous post was at 09:06 AM ----------
@booziboy
Sent from my SM-G935V using Tapatalk

stang5litre said:
Wrong. Pls give out accurate information. Knox never gets tripped as the kernel we use doesn't check dm-verity. So you Knox will not get tripped . But Sammy pay will not work with root. However Android Pay will work , use cloak from xposed. [emoji12] [emoji318]
Merry Christmas
Sent from my SM-G935V using Tapatalk
---------- Post added at 09:07 AM ---------- Previous post was at 09:06 AM ----------
@booziboy
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Thanks for the clarification. I was thinking of the S7 int'l (which I own) that is rooted with CF Autoroot, which trips Knox. Forgot about the kernel used on the US version.

the Doctor said:
Thanks for the clarification. I was thinking of the S7 int'l (which I own) that is rooted with CF Autoroot, which trips Knox. Forgot about the kernel used on the US version.
Click to expand...
Click to collapse
OK in that case once you trip Knox that's it for Sammy pay period. But android pay will still work. Sorry thought it was a US version
Sent from my SM-G935V using Tapatalk

Is there a good U version of the firmware that I can install ? Any idea on what would be a good firmware/Rom I should flash.
Love to get some pointers.

booziboy said:
Is there a good U version of the firmware that I can install ? Any idea on what would be a good firmware/Rom I should flash.
Love to get some pointers.
Click to expand...
Click to collapse
Don't use U fw it sucks! Has no doze which is the main battery saver built into MM. Force doze does not cut it. I suggest you flash a rom with working doze whatever you flash. Good luck and Merry Christmas to you.
Sent from my SM-G935V using Tapatalk

I was in your situation as well , since I got a Verizon Galaxy S7 from a deal at Best Buy , but I needed to used it on T-Mobile . I believe I successfully flashed the latest APK1 T-mobile firmware (latest one from early November) . I am able to use WiFi calling and MMS , but I haven't tried video calling yet. Looks like I'm getting 4g LTE speeds also (I live in suburban part of Los Angeles).
Use this post from XDA forum to find the latest firmware version :
http://forum.xda-developers.com/tmobile-galaxy-s7/help/one-stock-t-mobile-930-firmware-t3520525
I also used this guide as well :
http://www.w0lfdroid.com/2016/06/Ho...al-Firmware-on-Samsung-Galaxy-S7-S7-Edge.html
However, I suggest d/l 'ing the USB drivers from Samsung website directly, instead of the source cited in that website (seems suspicious). Also, having SmartSwitch on the PC saves so much time to backup your current phone's contents, believe me!
Hope that helps.

busterd said:
I was in your situation as well , since I got a Verizon Galaxy S7 from a deal at Best Buy , but I needed to used it on T-Mobile . I believe I successfully flashed the latest APK1 T-mobile firmware (latest one from early November) . I am able to use WiFi calling and MMS , but I haven't tried video calling yet. Looks like I'm getting 4g LTE speeds also (I live in suburban part of Los Angeles).
Use this post from XDA forum to find the latest firmware version :
http://forum.xda-developers.com/tmobile-galaxy-s7/help/one-stock-t-mobile-930-firmware-t3520525
I also used this guide as well :
http://www.w0lfdroid.com/2016/06/Ho...al-Firmware-on-Samsung-Galaxy-S7-S7-Edge.html
However, I suggest d/l 'ing the USB drivers from Samsung website directly, instead of the source cited in that website (seems suspicious). Also, having SmartSwitch on the PC saves so much time to backup your current phone's contents, believe me!
Hope that helps.
Click to expand...
Click to collapse
I actually need to do the exact same thing but my Verizon S7 is on the G930VVRU4API3, so from my understanding the U firmware i need to flash is the G930UUEU4API3?

just a tad bit off topic here, but i'm on tmobile right now with a tmo version S7 and wondering if it will work on Verizon if i unlock the phone?

//SM-G955U\\ *T-Mobile G955USQU1AQD9*

This is stock firmware to return back to stock etc ... Flash this with odin!
AP_G955USQU1AQD9_CL11131491_QB13157333_REV00_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G955USQU1AQD9_CL11131491_QB13157333_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G955USQU1AQD9_CP6187180_CL11131491_QB13157333_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_OYN_G955UOYN1AQD9_CL11131491_QB13157333_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OYN_G955UOYN1AQD9_CL11131491_QB13157333_REV00_user_low_ship_MULTI_CERT.tar.md5
USERDATA_TMB_G955USQU1AQD9_CL11131491_QB13157333_REV00_user_low_ship_MULTI_CERT.tar.md5
Note:
This is for the T-Mobile variant
https://www.androidfilehost.com/?fid=817550096634763961

Hmm, the U version already? wow

I know this says T-Mobile but will this work on Verizon like on the s7 edge?

nevermind

topaz330 said:
I know this says T-Mobile but will this work on Verizon like on the s7 edge?
Click to expand...
Click to collapse
Yes, I just flashed my "Verizon" s8 and it's now a "TMO" s8 with all TMO bands working.

topaz330 said:
I know this says T-Mobile but will this work on Verizon like on the s7 edge?
Click to expand...
Click to collapse
I honestly don't have the device I sold mine so flash at your own risk bootloaders might be the same or just wait for other users to test worst case you will need to flash to original firmware .. just make sure you have a backup firmware if it fails at some point

Hi, I tried downloading this however all the links and mirrors result in an unexpected end of archive

suzook said:
Yes, I just flashed my "Verizon" s8 and it's now a "TMO" s8 with all TMO bands working.
Click to expand...
Click to collapse
This means exciting things for the future!

suzook said:
Yes, I just flashed my "Verizon" s8 and it's now a "TMO" s8 with all TMO bands working.
Click to expand...
Click to collapse
Now why in the world didn't you just buy a T-Mobile S8 instead????
Sent from my SM-G955U using Tapatalk
---------- Post added at 05:39 PM ---------- Previous post was at 04:52 PM ----------
So JUSMEJOSE, where that root-eng you got gonna be posted?
Sent from my SM-G955U using Tapatalk

MicroMod777 said:
Now why in the world didn't you just buy a T-Mobile S8 instead????
Sent from my SM-G955U using Tapatalk
---------- Post added at 05:39 PM ---------- Previous post was at 04:52 PM ----------
So JUSMEJOSE, where that root-eng you got gonna be posted?
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
Got it cheap on swappa. What's the difference? They are all the same hw, just different SW.

@MicroMod777 That's a very good question I was doing some test on it but I sold my S8 and S8+ for a good price ... I'm actually making it have to have adb by default without OEM enable meaning I'm able to remove google accounts of it don't tell me how I do it ... just wait couple of days unless somebody else is working on it already ...

If I flash from att to tmo, I still have to network unlock it while in att firmware. Is there a way to do that without a tmo sim card? Usually u cannot enter unlock code without a different carrier sim inserted
Sent from my SM-G955U using Tapatalk

Please please upload att stock rom

johnwayne27 said:
If I flash from att to tmo, I still have to network unlock it while in att firmware. Is there a way to do that without a tmo sim card? Usually u cannot enter unlock code without a different carrier sim inserted
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
If you flash from ATT to TMob, is SIM unlocking even still necessary for it to detect a TMob SIM?

It's great to see the firmware is under 1GB in size! That means we'll be able to slim it down to maybe about 500mb way slimmed down!
Sent from my SM-G950U using XDA-Developers Legacy app

Sadly it seems corrupted. I tried from a few mirrors and I can't unzip using windows or 7-zip.

Dont know what happen will upload again

JUSMEJOSE said:
Dont know what happen will upload again
Click to expand...
Click to collapse
Thanks so much!!

That's why the DL was only 1GB. Its actually 2GB........theres goes my slim firmware dream lol
On another note, does TMO boot still have the awesome white screen you could morris code to outer space with and the TMO jingle that you can hear in outer space also? Its annoying as heck, when your working on your phone trying to be quiet and not light up the whole house when your phone boots.

smgrimes said:
Thanks so much!!
Click to expand...
Click to collapse
Link is fixed! enjoy!