Database Users

[Q] Bricked S4

I'm not sure what type of "bricked" this would be but, I tried to flash my Canadian Fido S4 I337m with a MF3 modem. I did this through Odin Mobile Pro. At first it was all good, it started to restart with a blue android figure. It started to take a really long time and nothing was happening so I decided to turn the phone off. Now the phone won't turn back on and it won't connect to the PC. I have my backup saved on my sd card but I can't get the phone to load at all.
It's currently stuck the battery charging power up screen. I can't post a picture since I haven't posted 10 times apparently... So it's the grey battery icon, the circle in the middle isn't moving whatsoever.
Did a battery pull, tried starting it in safe mode, and tried to restart it in the download mode. All of which have failed.
Any advice would be helpful.
Thanks
*Update*
The blue android figure is back. Does anyone have any information on how long this little android guy is supposed to be around for?

benjiyap said:
I'm not sure what type of "bricked" this would be but, I tried to flash my Canadian Fido S4 I337m with a MF3 modem. I did this through Odin Mobile Pro. At first it was all good, it started to restart with a blue android figure. It started to take a really long time and nothing was happening so I decided to turn the phone off. Now the phone won't turn back on and it won't connect to the PC. I have my backup saved on my sd card but I can't get the phone to load at all.
It's currently stuck the battery charging power up screen. I can't post a picture since I haven't posted 10 times apparently... So it's the grey battery icon, the circle in the middle isn't moving whatsoever.
Did a battery pull, tried starting it in safe mode, and tried to restart it in the download mode. All of which have failed.
Any advice would be helpful.
Thanks
*Update*
The blue android figure is back. Does anyone have any information on how long this little android guy is supposed to be around for?
Click to expand...
Click to collapse
Download Odin 3.07 for the PC.... you flashed the wrong mode... I believe you flashed a US modem not a Canadian on... suggest NC1 can be found in the forum...
With the phone unplugged, press volume down +home+power if you get a warning, release buttons and press voulme up to go to download mode...
Start Odin.... important... take off auto reboot....
there are instructions on how to properly flash the modem... likely in the same thread you found the file.....
Flash only the modem.bin file inside the folder... do not flash the nonhalos file....
Most instructions sau flash once... reboot to download mode.. flash again....
Basically let me know if you can get to download mode... I tried to google blue android on screen but didn't find anything yet... first I have heard of blue... I have seen green dead ones though....

Gage_Hero said:
Download Odin 3.07 for the PC.... you flashed the wrong mode... I believe you flashed a US modem not a Canadian on... suggest NC1 can be found in the forum...
With the phone unplugged, press volume down +home+power if you get a warning, release buttons and press voulme up to go to download mode...
Start Odin.... important... take off auto reboot....
there are instructions on how to properly flash the modem... likely in the same thread you found the file.....
Flash only the modem.bin file inside the folder... do not flash the nonhalos file....
Most instructions sau flash once... reboot to download mode.. flash again....
Basically let me know if you can get to download mode... I tried to google blue android on screen but didn't find anything yet... first I have heard of blue... I have seen green dead ones though....
Click to expand...
Click to collapse
No, I can't seem to get into download mode. It just keeps heading on to the the blue android. I purchased a dongle jig to get it to download mode on ebay hoping that would work.
Method 1 Odin Mobile
Extract TAR and place modem.bin on Internal or External SD Card
Open mobile Odin (free version works but pro is awesome)
Select modem 2 and find extracted bin file
Press flash firmware button
System will boot to download
Hold power button for 10 seconds if download mode in green comes up.( should be blue)
Odin will install modem files
Done
This is what I was following. It said if it comes up as a blue android it's good.

benjiyap said:
No, I can't seem to get into download mode. It just keeps heading on to the the blue android. I purchased a dongle jig to get it to download mode on ebay hoping that would work.
Method 1 Odin Mobile
Extract TAR and place modem.bin on Internal or External SD Card
Open mobile Odin (free version works but pro is awesome)
Select modem 2 and find extracted bin file
Press flash firmware button
System will boot to download
Hold power button for 10 seconds if download mode in green comes up.( should be blue)
Odin will install modem files
Done
This is what I was following. It said if it comes up as a blue android it's good.
Click to expand...
Click to collapse
If you put the modem file on an external sd card.... maybe you could pull the card, put it in a usb reader and put the proper modem.bin file on the card and put it back in the phone and power it up.... see what happens. I am guessing it couldn't finish the process because you have the wrong modem file...... Okay so now I realize you are stuck on the mobile odin logo... (blue guy) search google for how to get out of that or go to the mobile odin thread and ask chainfire... it is his app....

I've got the problem fixed. I re-flashed my whole firmware and managed to get the phone into download mode using a USB Jig. This is for reference if anyone encounters the same problem in the near future.
Thanks for the help and advice though.

Galaxy s4 Recovery mode issue Urgent

I need help and have no idea where to go. My phone restarted randomly like it usually does but It got stuck on this screen
http://forums.androidcentral.com/at...says-no-command-photo-27-04-2014-23-39-34.png
Sadly I had no backup for the device and am wondering if it's bricked. I can access the phone when I hold the power/ down volume/home button from time to time. I formatted the device hoping it would fix the issue. I managed to set up the device but I have to hold those specific buttons for it to work. Here are the device specs. I don't know what to do. I tried factory resetting it but with no luck. Every time i turn on the device I have to use that button order. I just have no idea what to do. I installed a stock rom via odin using this tutorial.
https://www.youtube.com/watch?v=LeYwhL1iS6k
Device: Samsung Galaxy s4 SGH-I337
Android : 4.4.4 kit kat
Edit: I have to hold volume down/home button/ power to turn it on which is quite annoying. I've never had this issue before. Is there a way to completely restore it to factory without having to do all this stuff? I tried doing it via recovery mode and in the phone itself. I get this screen https://cdn-images.xda-developers.com/direct/3/0/1/9/2/9/4/20120813002112.jpg
Which I usually get but then it goes straight to the odd recovery mode screen and not to the phone.
I found out something huge that might help! My volume up key isn't working so I'm assuming it's booting it straight into recovery mode for that reason. I read on a few sites saying I need the device repaired! I'm almost 100% sure thats the issue but correct me if im wrong. The volume up wont work at all.

Did you look here: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642 ?

SpiralFuzion123 said:
I need help and have no idea where to go. My phone restarted randomly like it usually does but It got stuck on this screen
http://forums.androidcentral.com/at...says-no-command-photo-27-04-2014-23-39-34.png
Sadly I had no backup for the device and am wondering if it's bricked. I can access the phone when I hold the power/ down volume/home button from time to time. I formatted the device hoping it would fix the issue. I managed to set up the device but I have to hold those specific buttons for it to work. Here are the device specs. I don't know what to do. I tried factory resetting it but with no luck. Every time i turn on the device I have to use that button order. I just have no idea what to do. I installed a stock rom via odin using this tutorial.
https://www.youtube.com/watch?v=LeYwhL1iS6k
Device: Samsung Galaxy s4 SGH-I337
Android : 4.4.4 kit kat
Edit: I have to hold volume down/home button/ power to turn it on which is quite annoying. I've never had this issue before. Is there a way to completely restore it to factory without having to do all this stuff? I tried doing it via recovery mode and in the phone itself. I get this screen https://cdn-images.xda-developers.com/direct/3/0/1/9/2/9/4/20120813002112.jpg
Which I usually get but then it goes straight to the odd recovery mode screen and not to the phone.
I found out something huge that might help! My volume up key isn't working so I'm assuming it's booting it straight into recovery mode for that reason. I read on a few sites saying I need the device repaired! I'm almost 100% sure thats the issue but correct me if im wrong. The volume up wont work at all.
Click to expand...
Click to collapse
The youtube video you mentioned was about how to root the i337. The video did not mentioned anything about stock rom installation via odin.
The video shows to install the nc1 kernel, then use the towel root to root and then install the NJ4 kernel back to work with system.
It appears that your system messed-up in installing the kernel.
You need to install the full firmware via odin. There is only one full firmware available for kit-kat. It is NB1 firmware with NC1 kernel cooked by muniz_ri. You can download the firmware from here.
Unrar the firmware and you will get .md5 file. Put your phone to download mode, load the .md5 file to AP slot of the odin and flash it.
If you have problem in flashing odin show the screen shot of odin error.
Once your phone is running fine, you can use towel root to root the phone. If you want to upgrade to NJ4 I will show you the direction then.

Bricked S8s after software update.

Hi. Browsed for ages and always come here for answers.
Here's my problem.
2x S8s. SM-950f.
Updated to most recent software through software update. Both phones were glitchy and crashing and just generally irritating after.
Factory data reset etc. This did not resolve the problems, also led to one of them having issues with FRP (annoying)
Used Odin to try and flash the latest firmware (from sammobile, UK BTU) after flashing both, they reset and powered on. Got stuck at the S8 screen.
Restarted then both were at the "an error occurred during update" screen.
Managed to get back to download screen. Re checked the software and model numbers, even that the bootloader was the correct version etc. All was fine.
Connected to Odin, shows that it is connected, but nothing happens when clicking start.
Now after attempting that, both phones will not power on.
(One will when placed on the wireless charger, but just sticks at S8 screen) and download mode or reset screen can not be accessed. So, not exactly happy. And totally out of ideas
Any suggestions, beyond taking it to a shop to see if anyone can help.

yes .....dont tuch the phones for 24 hours let the battery die ...it will...connect to pc and then try download mode....u may need to press combination for like 1 minute to get to download mode....flash twrp reboot directly into it when odin says successfully .....wipe system data ....dont turn on phone download any custom rom flash and enjoy.....it will trip knox but worth than getting a new board....

Okay, will give that a try.
TWRP?

TWRP install
https://dl.twrp.me/dreamlte/twrp-3.2.3-0-dreamlte.img.tar.html: Download link for twrp SM-G950F (dreamlte)
Just said, wait until your device powers off due battery insufficience. Plug cable and hold at the same moment vol(down)+bixby+power. Then press vol(up) at the warning screen to proceed to odin mode. Let it charging a while like 1 h. Then unplug it and plug it to your pc. In Odin select ap the previous downloaded file. Take your mobile in your hand. With one hand, prepare your fingers to vol(up)+bixby and with the other hand start the flashibg process. Be careful, and take your hand directly from the mouse if you clicked start in odin, and position your one finger to power button, but dont click. If odin start pass, press immidiately the buttons (vol(up)+bixby+power) and let it to start into recovery. If you arrived to recovery, reply to us if not search for help!!!
Good luck
memreb

Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.

Can't get them to power on. Buggered

simonboyle said:
Still trying to get them on. Powered on to download mode but only for a couple of seconds and switched off again.
Click to expand...
Click to collapse
i have the same issue with my s8 but when i boot in download mode the screen goes black but if i press volupe up it connect to odin with black screen you shoud give it a try

Will try that

Okay, downloaded TWRP, can get phone calls nected to Odin but when I extract TWRP it doesn't give a valid file type.
Am I being dumb.
No files appear that Odin will recognise.
Also just shows as "recovery" no .tar or anything

Ignore above. Corrupted download.
Sorted.
Now when flashing TWRP is gets to a fail due to
"Complete (write) fail

Hi you should try flashing official firmware

itac47 said:
Hi you should try flashing official firmware
Click to expand...
Click to collapse
The point of the thread us that I am.unable to do that.
So kinda useless post buddy.
Read the OP.

Anyone want two bootlooped S8s? Hahahaha

simonboyle said:
Anyone want two bootlooped S8s? Hahahaha
Click to expand...
Click to collapse
Not sure what stage your at and maybe some more useless ideas
1. Trying to flash twrp is kinda of useless if you can't get into your system need oem unlock for that.
2. Have you tried taking out Sim card and SD card and reboot.
3. If you can at least boot try smart switch as it has a emergency recovery option.
4. Trying rebooting in safe mode.

All been attempted

Odin flash failed, stuck in Emergency Recovery screen, cannot turn off.

I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.

fastzombies said:
I was going along ok until I made the fatal error of transferring the Magisk patched file to PC via MTP instead of taking the time to re-learn adb, which must have corrupted it. Thus predictably Odin hung and I am in trouble.
Where I am stuck is being unable to turn the phone off to come back in download mode to start over with stock firmware. I have been unable to find any secret button presses, and the battery doesn't seem to want to die leaving me with an $800 paperweight.
I did search around for this first and didn't find any real answers. Has anyone found an effective solution to this problem? Thanks.
Click to expand...
Click to collapse
If Odin recognizes you device, you can flash firmware in emergency recovery.

Cindysmith0994 said:
If Odin recognizes you device, you can flash firmware in emergency recovery.
Click to expand...
Click to collapse
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.

fastzombies said:
Thank you, but the PC won't recognize the device. What does happen is the emergency recorevy screen tries to come up. I tried starting in download mode with bixby+vol down then USB. I did get the battery low enough where I don't get the teal screen of death anymore, perhaps it is too low for USB to work? What I was hoping for was the charging animation but no luck. Surely this is just a software problem and there is a way out.
Click to expand...
Click to collapse
Did you try getting into recovery and perform a data factory reset and then see what happens?

Just load the stock firmware BL, Ap, cp and home csc into Odin if you see emergency teal screen. The emergency screen will start loading
Black screen ....Perhaps your battery is dead?

Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.

fastzombies said:
Thank you all for the replies. I had let the battery get low in a misguided attempt (based on advice elsewhere) to get it to shut off. I had to let it charge a while for it to wake up enough for PC to see it. Then I was able to flash in Emergency Recovery mode.
Thank you for the help.
Click to expand...
Click to collapse
Glad you got your device up and running ?

Maybe someone can help me. I seemed to have borked my phone. I kept getting "Google is Stopping" with no way to fix it, so I tried reflashing my firmware in odin. After I loaded all the files and hit start, I realized I didn't untick auto reboot, so I tried aborting the installation and ended up with screen (I've had it before and got out of it by still flashing in Odin, but now, if I try to reflash firmware while in this screen, it's stuck on SYSTEM in odin.
Any help appreciated!

Try this
That is where I got stuck. Are you trying to flash stock or patched firmware? I had to start over with stock as I copied the patched via MTP instead of adb and it got corrupted.
I think what I did was unplug and reset Odin. Wait for screen to turn off, then make sure it is at least 80% charged. Then Bixby + Vol Down + plug in and you will go back to this screen. Then I was able to flash stock. I had to go so far as to re-lock bootloader and flash stock again since my "OEM Unlocking" was not just greyed out but missing. Since then I've had no time to try again, but at least I have a working phone.
This is my anecdotal procedure, can't say if it is the right or best one.

Hi All,
I was trying to flash the latest firmware for my device (G9750ZCU2ASG4) and during the odin process, my computer restarted which failed the update halfway through. I rebooted the computer, tried again, and it was trying to establish a connection for a really long time, so I disconnected my phone from the USB port on my computer, and held Power and Volume Down to try and force reboot the phone. I was going to try and go back into download mode to restart the process. My phone mentioned something about needing to do an emergency recovery, but I continued to hold down the power and volume down keys and then everything went black on the phone.
I've tried multiple USB cords, all of the button commands known for the device, and have even tried to perform the emergency mode recovery on my device, but it seems like it's in some sort of locked state; What I mean is the phone is stuck on a black screen. I can't "boot" into recovery or into download mode. The phone doesn't even vibrate when I hold the power button or power and down to try and force reboot it. Odin doesn't recognize the phone when I plug it into the computer nor does the device manager on my windows computer.
Does anyone have any experience with this sort of issue or any idea of what else I can do to try and get into download mode to flash my firmware again? All help, suggestions, or comments regarding this are much appreciated.

Sounds like the battery is dead

Hi Dude, I am struggling with the same problem, read this post and it came to me, had to come back and give you the solution.
Press bixby+volume down, IMMEDIATELY after the screen goes off, hold volume up and down while connecting the USB cable super fast.
You have got like 10ms to do it
Otherwise it just goes back to the AVB FAIL screen

Ran into this issue, none of the above worked for me.
This is how I resolved:
1) Placed phone on wireless charging mat and let it boot to emergency recovery screen
2) Load TWRP into AP slot of Odin and leave the window open on your computer ready to flash
3) Connect phone to computer whilst it's on the mat and press start in Odin as soon as your device appears
It may fail a few times but if your quick you can install TWRP.
4) Now boot into recovery and let your phone charge to a reasonable level (above 20%)
5) Boot into Download mode and flash your desired rim via Odin

Samsung sm-t580 infinity boot problem

I'm having this problem on my samsung tab sm-t580, it's in an infinite loop as you can see in the video. I can only enter donwload mode if I have the tablet connected to the computer and if I disconnect the cable the tablet shuts down, every time I tried to install twrp through odin it always gave me an error and I couldn't. Someone can help me?

desertrock83 said:
I'm having this problem on my samsung tab sm-t580, it's in an infinite loop as you can see in the video. I can only enter donwload mode if I have the tablet connected to the computer and if I disconnect the cable the tablet shuts down, every time I tried to install twrp through odin it always gave me an error and I couldn't. Someone can help me?
Click to expand...
Click to collapse
Well it looks to me like you've destroyed your partitions or partition info, probably when trying to flash TWRP. It was probably for a different model. If you can get to download mode you have a chance. If you cant get to download mode:
Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
Press Volume Up on the warning screen to accept it and boot into Download mode.
Also, I'd stop trying to flash TWRP. I think that's your problem. Since it seems you can get to download mode while connected to the computer, stay there and flash your stock ROM first. Be sure to use the Odin Re-Partition option since I believe your partitons are messed up (see the attached picture), it wont hurt anything as you're going to re-flash your OEM firmware. That should restore your booting to normal. Then, as I mentioned, find the correct TWRP, one that has been confirmed by more than one person to work with your T-580. Make sure that you can reboot several times to the stock ROM and then try get to recovery from the buttons or adp.
I am building some 30 pin JIGs that are designed to force download mode immediately after power is turned on. These are widely available, or used to be, for the micro USB port on other Samsung Android devices, but I haven't found any for the 30 pin connector so I am making my own. These will be available by the end of October 2021 on eBay once I confirm they are working as expected.
Good luck!