Hi
yesterday i did a factory reset also wipe cache and installed the DBT Firmware.
I still can not connect to any bluetooth headphones or speakers.
He cant find nearby devices.
I tried serveral times to clean the cache from BluetoothTest, Bluetooth Midi Service and Bluetooth main programm.
Also restarted my device several times.
Has anbody some ideas or the same problems?
thx
Related
I have recently updated GingerDX from 011 to 019, and then to 020.
On 011 and 019, I was able to connect my phone with USB to my stereo and listen to the mp3s on my SD.
But after I updated to 020, I got problems with this.
I disabled USB debugging
I turned on my stereo.
I connected my phone.
The LED turned on, the USB-dialog popped up, I clicked the "activate button"
After some seconds, the SD was mounted, the Android in the window turned from green to orange.
On the stereo´s display, it said loading, just as it always did when I had connected my phone.
but then, after few seconds, the USB dialog on the X8 closed itself, and the stereo said "disconnected".
After a few seconds, the dialog popped up again, I tried it again with the same results.
I have tried it again and again, and always the same.
It also didn´t work with CWM, it loaded, disconnected, loaded again and so on.
I flashed 019 again, but it also didn´t work.
I changed the size of the SD-cache, the same happened.
I wiped the cache, and got the same result.
I did a full wipe, it also refused to work.
But the strangest thing is:
USB storage works on the computer!
So, what could I also try, or should I flash 2.1 agin and reroot, because I´m just out of ideas what I could do!
Did anyone else get this problem, or can anyone confirm that it works on another version of GDX?
Please help me, as this is really important for me.
my gt540's wifi is not workig from the day i installed custom rom on it
Till now i have changed so many roms
but in none of them wifi connected
but wifi tethering works well
it doesnot connect even after password is correct
it just shows connecting connecting connecting and then disconnected....
I checked its MAC address in about option of settings
it shows unknown...
plz help
anujdhawan said:
my gt540's wifi is not workig from the day i installed custom rom on it
Till now i have changed so many roms
but in none of them wifi connected
but wifi tethering works well
it doesnot connect even after password is correct
it just shows connecting connecting connecting and then disconnected....
I checked its MAC address in about option of settings
it shows unknown...
plz help
Click to expand...
Click to collapse
try disabling your wLAN security and try again
Have you tried factory reset ?
I think that the factory reset would solve the problem
Go into recovery and erase data, cache and dalvik-cache.
That will hopefully fix it
If not, try turning bluetooth on then using wifi
Guys could anyone help me?
My phone is Samsung A8 variant A800i non-rooted and already 6.0.1.
Eversince I upgraded to MM thru ODIN I am encountering an error in my OTG as in it won't read any disk... the only resort to make the otg work again is to reflash my phone. However during the most recent otg failure, a "USBsettings has stopped" was shown. I factory reset my phone but still this notification appears everytime I start my phone. So when I decided to reflash my phone, I was shocked that my laptop only charges my phone. It can't even detect my files thru mtp connection.
I tried the following and my laptop still can't detect my phone:
1. At the Developers Option I tried to switch the USB Configuration from MTP to Charging to MTP and various other switching, while connected and unconnected to laptop.
2. Dialled *#0808# to reset USBsettings but I am only getting "USBsettings" has stopped.
3. I reinstalled the USBsettings.apk from the system folder (via total commander).
4. I have installed USBsettings.apk taken from another phone.
By the way before I tried the above methods I have already eliminated the cable and pc problems since using the same cable and laptop, I can connect my other samsung phone thru mtp and is detected by odin. I have also tried various other desktop on Windows 7 and 10 but still the same problem: these only charges my phone.
Moreover, there is no abnormality in my charging time eversince this happened.
Hope someone could help me make this work again.
Thank You.
Bluetooth recognized the device but will not pair. The device is in pairing mode. The phone sees the device but when I tell it to connect it instantly says it cannot communicate with the device. I know the device works. I've had it successfully paired with another j3 and after trying to connect with this one unsuccessfully for an hour I connected to a nexus phone in under a minute. I no longer have the j3 it was paired with. I did a factory reset and returned it. I have tried rebooting the phone in safe mode removing any Bluetooth devices recognized and rebooting but nothing's changed.
Any suggestions?
Hi, Did you have update to the latest samsung update available ?
Yes it's current
Paul
CenturionFive said:
Yes it's current
Paul
Click to expand...
Click to collapse
Hum.. that's strange... flash stock rom and do a full scan of your phone with an anti malware.
Hello,
I have a TB-X505F (Lenovo Tab M10) with the stock ROM TB_X505F_S001149_221115_ROW.
It is rooted and I tried different Magsiks/Zygisk modules.
From one moment to the next, WLAN and BT can no longer be activated. If you move the slider for turning on WLAN to the right, it jumps back to off a few seconds later; the same with BT.
What I have already done:
- Reset network settings via Settings -> System
- Factory reset via Android
- Factory reset via TWRP
- Factory reset via StockRom recovery
- reinstalled the rom with LRSA.
- Reboot with and without SD card
Do you have any idea what that could be or what else I could try?
With a cellphone module I read that an IMEI can get lost and that the module can no longer connect to the cellphone network.
Is there something like that with the MAC address of the Wifi and BT interface?
Thanks.