Database Users

[Q] Did i do it all for nothing?

so here is the thing i found this forum because i was looking for a way to overclock my G3 so my games wouldn't lag anymore .... i flashed kyrillos 7.0 non-oc rom and then i fleshed fugumod kernel installed Setcpu and now my phone is running on 800 MHz max i downloaded ninja jump and pes and my phone is still lagging when i play them did i do all this for nothing is there some way ???

Shadowmaniac said:
so here is the thing i found this forum because i was looking for a way to overclock my G3 so my games wouldn't lag anymore .... i flashed kyrillos 7.0 non-oc rom and then i fleshed fugumod kernel installed Setcpu and now my phone is running on 800 MHz max i downloaded ninja jump and pes and my phone is still lagging when i play them did i do all this for nothing is there some way ???
Click to expand...
Click to collapse
I would suggest, since you are already running 7.0, check the link Kyrillos ROM v7.1 and update your ROM to v7.1 (its so much better, though optional), post that Flash G3Mod v 1.6 Kernel.
Then using Set CPU you can OC more than 800 Mhz.
Note : Dont forget to read the instructions carefully for Kyrillos 7.1 ROM, G3Mod Kernel and SetCPU.....remember, you do all this at your own risk..check my signature for my stats...

umangsagar said:
I would suggest, since you are already running 7.0, check the link Kyrillos ROM v7.1 and update your ROM to v7.1 (its so much better, though optional), post that Flash G3Mod v 1.6 Kernel.
Then using Set CPU you can OC more than 800 Mhz.
Note : Dont forget to read the instructions carefully for Kyrillos 7.1 ROM, G3Mod Kernel and SetCPU.....remember, you do all this at your own risk..check my signature for my stats...
Click to expand...
Click to collapse
1.i have kyrillos 7.0 non-oc so i dont know if i can upgrade to 7.1
2.i had G3mod v 1.6 but my phone freezed after 3 min of using it so i flashed fugumod
3.i dont want to overclock more then 800 MHz because i dont want my phone to die

Shadowmaniac said:
1.i have kyrillos 7.0 non-oc so i dont know if i can upgrade to 7.1
2.i had G3mod v 1.6 but my phone freezed after 3 min of using it so i flashed fugumod
3.i dont want to overclock more then 800 MHz because i dont want my phone to die
Click to expand...
Click to collapse
Go to 7.1 link given above, and save the file in your SD Card and rename it as update.zip
Then from CWM recovery, install it and you would have 7.1 (read the link, you got to have 7.0 installed to install 7.1, which u already have)
2ndly as far as OC goes, no one would want to have their cell die..my question is Do you guarantee that OC at 800 Mhz will not make ur phone dead? (just a food for thought, dont make this bug you )
What i normally do is, using SetCPU i OC only while playing game..i normally keep it as 600-1200 MHz, on demand.....after I am done...i set it back to 200-800 Mhz on demand...and I normally play for a couple of hours at stretch...nothing has happened to my phone so far...but at the same time, I know when you run at max speed, you are bound to tire early....decide what you want more

umangsagar said:
Go to 7.1 link given above, and save the file in your SD Card and rename it as update.zip
Then from CWM recovery, install it and you would have 7.1 (read the link, you got to have 7.0 installed to install 7.1, which u already have)
2ndly as far as OC goes, no one would want to have their cell die..my question is Do you guarantee that OC at 800 Mhz will not make ur phone dead? (just a food for thought, dont make this bug you )
What i normally do is, using SetCPU i OC only while playing game..i normally keep it as 600-1200 MHz, on demand.....after I am done...i set it back to 200-800 Mhz on demand...and I normally play for a couple of hours at stretch...nothing has happened to my phone so far...but at the same time, I know when you run at max speed, you are bound to tire early....decide what you want more
Click to expand...
Click to collapse
a friend told me that 7.1 isn't that diffrent from 7.0 so i don't think i will update

maybe u can try set it on performance that always helps a bit for me but i dont know

Shadowmaniac said:
a friend told me that 7.1 isn't that diffrent from 7.0 so i don't think i will update
Click to expand...
Click to collapse
I am surprised...you sure have not visited the link for 7.1 and read the changelog for what all has been updated vis-a-vis 7.0.(though as stated in my 1st post to you above, it is optional, what you need to decide is whether to have a Kernel which lets you to overclock, if at all you intend to overclock at higher values.)....have what suits you cheers mate.

umangsagar said:
I am surprised...you sure have not visited the link for 7.1 and read the changelog for what all has been updated vis-a-vis 7.0.(though as stated in my 1st post to you above, it is optional, what you need to decide is whether to have a Kernel which lets you to overclock, if at all you intend to overclock at higher values.)....have what suits you cheers mate.
Click to expand...
Click to collapse
ok i will see then

umangsagar said:
Go to 7.1 link given above, and save the file in your SD Card and rename it as update.zip
Then from CWM recovery, install it and you would have 7.1 (read the link, you got to have 7.0 installed to install 7.1, which u already have)
Click to expand...
Click to collapse
thx for this help !
I'm looking forward to do this update (didn't know it was possible with that zip)
Some Q:
- Will it keep all installs, settings and apps as they are now? (I have K7.0-OC)
- I have G3-1.7 (looking forward to the battery fix), won't it harm this kernel or will of flash the fugumod again? (and do I need to reflash afterwards?)
- I have ext4 with many installs, won't it be damaged after updating?
- I don't have a swap, is it needed? Does it make a difference? (in the g3mod app I've set all to ext4, does this move the swap to ext4? It's 500Mb and half used by now...)
I wouldn't want to ruïn my system now, since it's finally running (not always smooth, dough...)

I suggest using fugumod ultra as that has an OCed bus so games wont lagg.
Sent from my GT-I5800 using XDA App

Godyn said:
thx for this help ! [\QUOTE]
I'm looking forward to do this update (didn't know it was possible with that zip)
Some Q:
- Will it keep all installs, settings and apps as they are now? (I have K7.0-OC) It will wipe, you can take backup with Titanium and then later after installing 7.1 you can restore it.
- I have G3-1.7 (looking forward to the battery fix), won't it harm this kernel or will of flash the fugumod again? (and do I need to reflash afterwards?) You can flash the Kernel later, any Kernel of your choice.
- I have ext4 with many installs, won't it be damaged after updating? I dont think it will change your file system.
- I don't have a swap, is it needed? Does it make a difference? (in the g3mod app I've set all to ext4, does this move the swap to ext4? It's 500Mb and half used by now...) SWAP is used as a temporary memory, it is only optional, so choice is yours, I had it in past, right now, i dont have it on my configuration.
I wouldn't want to ruïn my system now, since it's finally running (not always smooth, dough...)
If its not running smooth, why do you worry about not ruining it, you can try various things on the forum, and you will have finally known, what to keep and what not to!
Others will give their views too here so you would know.
Click to expand...
Click to collapse

umangsagar said:
Godyn said:
thx for this help ! [\QUOTE]
I'm looking forward to do this update (didn't know it was possible with that zip)
Some Q:
- Will it keep all installs, settings and apps as they are now? (I have K7.0-OC) It will wipe, you can take backup with Titanium and then later after installing 7.1 you can restore it.
- I have G3-1.7 (looking forward to the battery fix), won't it harm this kernel or will of flash the fugumod again? (and do I need to reflash afterwards?) You can flash the Kernel later, any Kernel of your choice.
- I have ext4 with many installs, won't it be damaged after updating? I dont think it will change your file system.
- I don't have a swap, is it needed? Does it make a difference? (in the g3mod app I've set all to ext4, does this move the swap to ext4? It's 500Mb and half used by now...) SWAP is used as a temporary memory, it is only optional, so choice is yours, I had it in past, right now, i dont have it on my configuration.
I wouldn't want to ruïn my system now, since it's finally running (not always smooth, dough...)
If its not running smooth, why do you worry about not ruining it, you can try various things on the forum, and you will have finally known, what to keep and what not to!
Others will give their views too here so you would know.
Click to expand...
Click to collapse
Thx for your help ! Much appreciated
I installed, but it didn't ask for wiping (do I HAVE to do it manualy, because it's better not of course, now that I have everything installed.)
Also, I think it makes my phone slower :-/
Or would the wipe help???
umangsagar said:
Godyn said:
thx mate
I've tried it
it doesn't make my phone faster, from 396 to 409 in the benchmark.
Probably it's the SD card?
Click to expand...
Click to collapse
Dont worry about the quadrant score, its misleading.
You can get a higher quadrant score by some tweaks, but more importantly.
See if your phone is more responsive, much faster, no lags, no freezes. If it is there, quadrant doesnt matter.
Click to expand...
Click to collapse
I did the SU terminal supercharger settings, I tried the multitasking, but the rest is to technical for me.
Any suggestions?
Click to expand...
Click to collapse

Godyn said:
umangsagar said:
Thx for your help ! Much appreciated
I installed, but it didn't ask for wiping (do I HAVE to do it manualy, because it's better not of course, now that I have everything installed.)
Also, I think it makes my phone slower :-/
Or would the wipe help???
I did the SU terminal supercharger settings, I tried the multitasking, but the rest is to technical for me.
Any suggestions?
Click to expand...
Click to collapse
Brother, it does not ask for wiping, you have to do it manually...Also Supercharger doesnt work for me however lagfix does, but again I would say more than quadrant score, you should be concerned about the performance of the phone and responsiveness.
Click to expand...
Click to collapse

kernel for CM 10.2 with overclocking capabilities?

I probably searched for oc kernel for days now.There isn't right?

portis said:
I probably searched for oc kernel for days now.There isn't right?
Click to expand...
Click to collapse
have you even looked in the development forums
there are lots of kernels that have oc capabilities, and that are compatible with cm 10.2.

Yes i do. Mybe the problem is in me,could you give as a link to 1 kernel for example.Thanks.
simms22 said:
have you even looked in the development forums
there are lots of kernels that have oc capabilities, and that are compatible with cm 10.2.
Click to expand...
Click to collapse

trinity kernel, latest, tf4h is the name http://goo.gl/wteFmX
it can be clocked to 1728mhz, but you need a cpu control app for that. its defaulted to 1026mhz when it boots. dont let the 1026mhz scare you, its as quick as many other kernels at 1512mhz
trinity fours xda thread http://forum.xda-developers.com/showthread.php?t=2083904&page=2189
just flash over what you have now, dont wipe a single thing! make a nandroid backup in recovery if you want
portis said:
Yes i do. Mybe the problem is in me,could you give as a link to 1 kernel for example.Thanks.
Click to expand...
Click to collapse

simms22 said:
trinity kernel, latest, tf4h is the name http://goo.gl/wteFmX
it can be clocked to 1728mhz, but you need a cpu control app for that. its defaulted to 1026mhz when it boots. dont let the 1026mhz scare you, its as quick as many other kernels at 1512mhz
trinity fours xda thread http://forum.xda-developers.com/showthread.php?t=2083904&page=2189
just flash over what you have now, dont wipe a single thing! make a nandroid backup in recovery if you want
Click to expand...
Click to collapse
You might wanna give him TF3 Full instead if he wants to use 4 cores instead of 2, or maybe something like TF133 if he's on 4.2 :good:

Detailed said:
You might wanna give him TF3 Full instead if he wants to use 4 cores instead of 2, or maybe something like TF133 if he's on 4.2 :good:
Click to expand...
Click to collapse
youre right!
for android 4.3
tf3 http://goo.gl/jcWJfK
tf4c is defaulted two cores set as max and min cpu(dual core), tf3 is running all 4 cores
for android 4.2.2
tf133 http://goo.gl/jPK5E
latest and last 4.2.2 kernel tf152 http://goo.gl/CDAGV7

Nexus 9 User Benchmark Thread

I have not seen a similar thread knocking around so anyone who is interested please post your benchmark scores for all to see.
Here is my Antutu score
Stock ROM
ElementalX Kernel

Decrypted stock 5.0.1
Stock Android 5.0.1, decrypted

[ROM][5.0.2] LiquidSmooth 4.0
[Kernel] FIRE-ICE

ROM AICP
decrypted
Kernel: you know

This is completely stock unrooted and must say not bad compared to rooted devices.

USBhost said:
ROM AICP
decrypted
Kernel: you know
Click to expand...
Click to collapse
Very impressive score I will try your kernel now.

Update my score

USBhost said:
Update my score
Click to expand...
Click to collapse
Again very impressive. Antutu app was updated to support 64bit test for 64bit android so probably helped the score.
Will be interesting to see if it improves on 5.1.

USBhost said:
Update my score
Click to expand...
Click to collapse
What is your window manager res and density
Here is my best with my own unpublished ROM and Elemental X...
And that was without really working two hard to get it.
I will try your kernel tonight.

Here is just the beta stage of my ROM, not tweaked hard yet, stock kernel.

Here is my best with @flar2's Elemental X
Click to expand...
Click to collapse

Gonna try Fire-Ice now :good:

scrosler said:
Here is my best with @flar2's Elemental X
Click to expand...
Click to collapse
Nice

USBhost said:
Nice
Click to expand...
Click to collapse
Gonna try your kernel now...
Anything I need to know to make it run its best?

scrosler said:
Gonna try your kernel now...
Anything I need to know to make it run its best?
Click to expand...
Click to collapse
Remove the Interactive fix in
Init.d

USBhost said:
Remove the Interactive fix in
Init.d
Click to expand...
Click to collapse
Oh snap! Will do!
Got first run going through now... will remove it after that.
I am clocking using Elemental X App like your recommendation in the OP.
And what gov will give best results? Any prefs?

I dont know what it is... But I cant get a good run with your kernel. Day to day use its nice... But as far as benchmarks I cant get the results that I "feel" from your kernel.
Could also be "my" ROM tweaks just dont like your kernel, **** happens

scrosler said:
I dont know what it is... But I cant get a good run with your kernel. Day to day use its nice... But as far as benchmarks I cant get the results that I "feel" from your kernel.
Could also be "my" ROM tweaks just dont like your kernel, **** happens
Click to expand...
Click to collapse
True
I find it so funny that I can't seem to git past the 61-2k mark on
elementalX. I wonder why? But who knows
But in the end of the day
The one that's the most smooth wins

USBhost said:
True
I find it so funny that I can't seem to git past the 61-2k mark on
elementalX. I wonder why? But who knows
But in the end of the day
The one that's the most smooth wins
Click to expand...
Click to collapse
Both kernels are smooth. Good job to both of you! :good:
But like any device you have CPU Bins... My bin may be the same as Flar2's and your bin may be different...
Case in point... I cannot O/C my Nexus 6 with Flar2's kernel but it runs smooth. Agitates my I cant O/C but its smooth so I cant really complain.
Benchmarks are just for bragging rights anyways! How the every day usage feels is the important part. I think the two kerenls (yours and his) are equal for daily usage!
I would recommend either. They are both great!
Wish I had Kernel skills like that! Im just a ROM guy

I have stock nexus 9 decrypted, elemental x kernel OC to 2499 an GPU of to 984, deadline scheduler... Can't ever seem to get more than 58k....
So weird that the USB host guy says "stock ROM with elemental kernel" and Gert's like a 67k out the gate.
I cant even Check the CPU BIN because this is an Nvidia chip and that info isn't stored in the same place in android as it is ith Qualcomm chipsets.
Sent from my Nexus 9 using XDA Free mobile app

[KERNEL] Unofficial Guyver Kernel Builds Thread

https://forum.xda-developers.com/showthread.php?t=3602554
this thread closed for now
but MEGAX91 doesn't stopped develop.
so i decided to build this and share with others
Download
- 08/16
kernel with only his source https://www.androidfilehost.com/?fid=817550096634793028 -> linux 3.18.54
kernel with my work https://www.androidfilehost.com/?fid=961840155545589107 -> linux 3.18.65
credits
- MEGAX91
source
- MEGAX91 https://github.com/GUYVER91/Capricorn
- me https://github.com/nazunamoe/Capricorn-1/

reserved

which version of bootloader is needed?

357662149 said:
which version of bootloader is needed?
Click to expand...
Click to collapse
mm bootloader needed
Tapatalk を使用して私の MI 5s から送信

Will we ever find out why standalone kernels won't boot on nougat bootloader?

Gotta ask, did you fix the sleep of death issue? From version 1.9 too 2.2 my phone, either in sleep or in use, will lock up after a few hours and I have to force restart it. Clock speeds and everything else is irrelevant as there was something wrong in the kernel itself. Anyways thanks for continuing the development. The kernel was amazing besides the hangs

MIUI Stock Kernel with Overclock
*Sorry for my bad english
Can you make MIUI Stock kernel with adding CPU freq 2,3 Ghz Big Core ,2,2 Ghz Little Core CPU, and GPU to 650 Mhz ? ,
I just discovered that removing Thermal config in /etc/thermal-engine-8996.conf boost performance and stability for playing emulator game like Tekken 6 and Monster Hunter P3rd (both with OpenGL), and Digimon World 4 (Dolphin Emu) yet raising CPU to 64 degree Celcius,
I just Wanna know that adding 2,3 Ghz and 650 Mhz is really boost more perfomance for emulator or not.

can you add voltage control?op3t and mi5 have this funcation,and what about miui version

Does this kernel support MIUI or LOS.
Currently I'm on 3.18.31-DragonXia_MIUI_3.9.1 kernel

xUmaRix said:
Does this kernel support MIUI or LOS.
Currently I'm on 3.18.31-DragonXia_MIUI_3.9.1 kernel
Click to expand...
Click to collapse
That one supports mi5s?

Chaninoza said:
That one supports mi5s?
Click to expand...
Click to collapse
Yes it is .
Hit thanks if it works

xUmaRix said:
Yes it is .
Hit thanks if it works
Click to expand...
Click to collapse
Thanks, but im still at MM.

xUmaRix said:
Yes it is .
Hit thanks if it works
Click to expand...
Click to collapse
Hey!
Where is the official github and/or forum thread of the DragonXia kernel for Mi5s?
Thanks!

Up for this! Sounds interesting. What are features of this kernel? Thanks for sharing btw.

xUmaRix said:
Yes it is .
Hit thanks if it works
Click to expand...
Click to collapse
I installed this. It only change kernel name and doesn't have additional features. No oc, battery fast charge, ntfs support etc like original DragonXia.
Give us a source in this case.
Shame on you

Mind building actual version ?

kael2404 said:
I installed this. It only change kernel name and doesn't have additional features. No oc, battery fast charge, ntfs support etc like original DragonXia.
Give us a source in this case.
Shame on you
Click to expand...
Click to collapse
Well i can change the governor and enable lazyplug using this kernel.

xUmaRix said:
Well i can change the governor and enable lazyplug using this kernel.
Click to expand...
Click to collapse
Sorry if i being rude,
Can you add CPU OC and GPU OC?
*Edited
I mean, add CPU Freq 2,3 and GPU Freq 650 to Dragonxia kernel.

mumiji-lo said:
Sorry if i being rude,
Can you add CPU OC and GPU OC?
*Edited
I mean, add CPU Freq 2,3 and GPU Freq 650 to Dragonxia kernel.
Click to expand...
Click to collapse
I don't think it support OC.
I think we need to ask dragonxia or whoever maintain this kernel
I can't find it on github
I got it from here https://www.androidfilehost.com/?w=files&flid=168633

xUmaRix said:
I don't think it support OC.
I think we need to ask dragonxia or whoever maintain this kernel
I can't find it on github
I got it from here https://www.androidfilehost.com/?w=files&flid=168633
Click to expand...
Click to collapse
What app is this and where can i get it? :3

ROM Performance comparison table

Table of Geekbench results
I was surprised about EUI too.
Suggest what ROMs to test next and other stuff.
If you want to suggest your test make sure:
Your installation have NO tweaks/other stuff installed(except if it is kernel which is required for MIUI to function normally)
Your installation have only Geekbench 4 app and nothing else
Run test 2 times, and post a screenshot of 2nd test there.

I did a little mistake: typed Overdose kernel instead of Overload
Fixed it now

Nice work :good:

OctoNezd said:
Table of Geekbench results
I was surprised about EUI too.
Suggest what ROMs to test next and other stuff.
If you want to suggest your test make sure:
Your installation have NO tweaks/other stuff installed(except if it is kernel which is required for MIUI to function normally)
Your installation have only Geekbench 4 app and nothing else
Run test 2 times, and post a screenshot of 2nd test there.
Click to expand...
Click to collapse
Lol it seems you made the Los 14 test with sleeping big cores. Could you also give the dark rom score with sleeping big cores, as you said no tweeks are allowed...
or is this the first nougat rom where this problem is solved?

FridrufHau said:
Lol it seems you made the Los 14 test with sleeping big cores. Could you also give the dark rom score with sleeping big cores, as you said no tweeks are allowed...
or is this the first nougat rom where this problem is solved?
Click to expand...
Click to collapse
When I say "no tweaks are allowed" I mean that user shouldn't apply anything after flash, except something that is necessary to make ROM work, like kernel in MIUI, gapps in DarkROM. I did not installed anything except OpenGAPPS into DarkROM.
*shrug*

OctoNezd said:
When I say "no tweaks are allowed" I mean that user shouldn't apply anything after flash, except something that is necessary to make ROM work, like kernel in MIUI, gapps in DarkROM. I did not installed anything except OpenGAPPS into DarkROM.
*shrug*
Click to expand...
Click to collapse
Just want to tell you you are comparing wrong somehow, if you give a Los14 score with 2500 for cpu as mine was 3900.
But ok, enjoy yourself
https://forum.xda-developers.com/attachment.php?attachmentid=4277641&d=1505893998

FridrufHau said:
Just want to tell you you are comparing wrong somehow, if you give a Los14 score with 2500 for cpu as mine was 3900.
But ok, enjoy yourself
https://forum.xda-developers.com/attachment.php?attachmentid=4277641&d=1505893998
Click to expand...
Click to collapse
Make a compute test too, and I maybe update info in table

OctoNezd said:
Make a compute test too, and I maybe update info in table
Click to expand...
Click to collapse
Sorry, I now noticed the score was already for carbon rom, but Los14 wasn't far away as I remember.
Lol I don't care about the speed of any Nougat Rom as long as big cores go asleep without root controls.
So I don't want to participate in your table which is filled with some kind of lottery numbers
Thx for your work anyway, would have been a nice idea if it has been done correctly.
Which is meaning every phone should be left on with display off for half an hour and then you can run geekbench.
As it seems you don't know what I am talking about I am already tired of posting my thread link:
https://forum.xda-developers.com/le-2/help/core-sleep-problem-poll-please-help-t3676221
Kind regards

ROM - Eui 5.9.23s Chinese
Kernel - overload 2.4 kernel
CPU - 3095
GPU - 4372
Total - 7467

veer.killerboy said:
ROM - Eui 5.9.23s Chinese
Kernel - overload 2.4 kernel
CPU - 3095
GPU - 4372
Total - 7467
Click to expand...
Click to collapse
what about mokee?